Skip to Content
Last modified by Kilight Cao on 2025/08/05 11:24
From version 354.1
edited by Kilight Cao
on 2025/08/05 11:24
Change comment: There is no comment for this version
To version 228.1
edited by Kilight Cao
on 2023/06/19 10:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Content
... ... @@ -1,4 +1,5 @@
1 -[[image:image-20220620202334-2.png||data-xwiki-image-style-alignment="center" height="467" width="809"]]
1 +(% style="text-align:center" %)
2 +[[image:image-20220620202334-2.png||height="467" width="809"]]
2 2  
3 3  
4 4  (((
... ... @@ -7,7 +7,7 @@
7 7  
8 8  )))
9 9  
10 -**Table of Contents:**
11 +**Table of Contents：**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -17,7 +17,7 @@
17 17  
18 18  = 1. Introduction =
19 19  
20 -== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
21 +== 1.1 What is LPS8v2 ==
21 21  
22 22  
23 23  (((
... ... @@ -30,7 +30,7 @@
30 30  )))
31 31  
32 32  (((
33 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server ChirpStack-V4 and IoT server Node-red**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 34  )))
35 35  
36 36  (((
... ... @@ -42,8 +42,6 @@
42 42  )))
43 43  
44 44  
45 -
46 -
47 47  == 1.2 Specifications ==
48 48  
49 49  
... ... @@ -82,7 +82,7 @@
82 82  ** Semtech UDP Packet Forwarder
83 83  ** LoRaWAN Basic Station
84 84  ** ChirpStack-Gateway-Bridge (MQTT)
85 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
86 86  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
87 87  
88 88  == 1.4 LED Indicators ==
... ... @@ -97,16 +97,16 @@
97 97  
98 98  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
99 99  
100 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
101 101  
102 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
103 103  
104 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
105 105  
106 106  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
107 107  
108 108  
109 -== 1.5 Button Instruction ==
108 +== 1.5 Button Intruction ==
110 110  
111 111  
112 112  LPS8-V2 has a black toggle button, which is:
... ... @@ -122,18 +122,6 @@
122 122   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
123 123  
124 124  
125 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
126 -
127 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
128 -
129 -
130 -When the gateway restores the factory settings is complete,
131 -
132 -The WiFi configuration will enable WiFi Access Point by default.
133 -
134 -The other configuration will be restored to the default configuration.
135 -
136 -
137 137  = 2. Quick Start =
138 138  
139 139  
... ... @@ -142,9 +142,9 @@
142 142  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
143 143  
144 144  
145 -== 2.1 Access and Configure LPS8-V2 ==
132 +== 2.1 Connects to the network and accesses the gateway Web UI ==
146 146  
147 -=== 2.1.1 Find IP address of LPS8-V2 ===
134 +=== 2.1.1 connect the network ===
148 148  
149 149  
150 150  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -161,6 +161,7 @@
161 161  [[image:image-20230527085250-2.png||height="495" width="284"]]
162 162  
163 163  
151 +
164 164  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
165 165  
166 166  
... ... @@ -175,6 +175,7 @@
175 175  [[image:image-20220622100129-1.png||height="332" width="1263"]]
176 176  
177 177  
166 +
178 178  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
179 179  
180 180  
... ... @@ -198,7 +198,7 @@
198 198  
199 199  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
200 200  
201 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
190 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
202 202  
203 203  
204 204  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -206,6 +206,7 @@
206 206  [[image:image-20230111094247-2.png||height="619" width="1250"]]
207 207  
208 208  
198 +
209 209  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
210 210  
211 211  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -214,18 +214,19 @@
214 214  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
215 215  
216 216  
217 -[[image:image-20241231151635-3.png||height="481" width="944"]]
207 +[[image:image-20220622102702-6.png]]
218 218  
219 219  
220 220  
221 221  **Wi-Fi configuration successful**
222 222  
223 -[[image:image-20241231151810-4.png||height="487" width="947"]]
224 224  
214 +[[image:image-20220622102847-7.png]]
225 225  
226 -[[image:image-20241231152015-6.png||height="506" width="1001"]]
227 227  
217 +[[image:image-20220622102901-8.png||height="476" width="938"]]
228 228  
219 +
229 229  === 2.1.2 Access Configure Web UI ===
230 230  
231 231  
... ... @@ -244,7 +244,7 @@
244 244  
245 245  (% style="color:blue" %)**Password:   dragino**
246 246  
247 -[[image:image-20240318160845-1.png]]
238 +[[image:image-20230106153501-1.png||height="367" width="894"]]
248 248  
249 249  
250 250  == 2.2  Typical Network Setup ==
... ... @@ -276,7 +276,7 @@
276 276  
277 277  The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
278 278  
279 -[[image:image-20241231151512-2.png]]
270 +[[image:image-20230411095739-1.png||height="264" width="691"]]
280 280  
281 281  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
282 282  
... ... @@ -296,7 +296,7 @@
296 296  Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
297 297  
298 298  
299 -[[image:image-20241231153425-1.jpeg||height="262" width="884"]]
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
300 300  
301 301  
302 302  The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
... ... @@ -307,12 +307,6 @@
307 307  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 308  
309 309  
310 -(% style="color:red" %)**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 -
312 -
313 -When cellular fails to connect or has problems, users can refer to this link to (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)Trouble Shooting(%%):**[[How to Trouble Shooting if Cellular connection fails>>https://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20cellular%20network%20connection/#H2.2ForLPS8v22FMS48-LR]]**
314 -
315 -
316 316  === 2.2.5  Check Internet connection ===
317 317  
318 318  
... ... @@ -406,7 +406,7 @@
406 406  
407 407  
408 408  (% class="wikigeneratedid" %)
409 -[[image:image-20220616110739-1.png||height="457" width="836"]]
394 +[[image:image-20220616110739-1.png||height="372" width="682"]]
410 410  
411 411  
412 412  (((
... ... @@ -436,40 +436,25 @@
436 436  
437 437  (((
438 438  Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
439 -
440 -
441 -== (% style="color:inherit; font-family:inherit; font-size:26px" %)3.4  Forwarder(%%) ==
442 442  )))
443 443  
444 -=== 3.4.1 Forwarder ~-~-> MQTT Forwarder ===
445 445  
427 +== 3.4 Network Settings ==
446 446  
447 -In the latest version, MQTT Forwarder functionality has been added to the LPS8V2 gateway by default
429 +=== 3.4.1 Network ~-~-> WiFi ===
448 448  
449 -Users can configure the MQTT Forwarder on the **Forwarder~-~->MQTT** interface, and when the configuration is successful, it will forward the sensor data of the lorawan server chirpstack built in LPS8v2
450 -
451 -For a detailed example of this feature, see this link:**[[MQTT Forward Instruction - DRAGINO>>http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/#H3.3A0UseLoRaWANProtocolforcommunication--ForLPS8V2]]**
452 -
453 -(% class="wikigeneratedid" %)
454 -[[image:image-20240902092034-1.png]]
455 -
456 -
457 -== 3.5 Network Settings ==
458 -
459 -=== 3.5.1 Network ~-~-> WiFi ===
460 -
461 461  Users can configure the wifi WAN and enable Wifi Access Point on this interface
462 462  
463 -[[image:image-20241231151434-1.png||height="608" width="1195"]]
433 +[[image:image-20230619095946-1.png||height="332" width="827"]]
464 464  
465 465  
466 -=== 3.5.2 Network ~-~-> System Status ===
436 +=== 3.4.2 Network ~-~-> System Status ===
467 467  
468 468  
469 469  [[image:image-20220820134112-2.png||height="539" width="668"]]
470 470  
471 471  
472 -=== 3.5.3 Network ~-~-> Network ===
442 +=== 3.4.3 Network ~-~-> Network ===
473 473  
474 474  
475 475  In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
... ... @@ -477,7 +477,7 @@
477 477  [[image:image-20230214093657-2.png||height="333" width="858"]]
478 478  
479 479  
480 -=== 3.5.4 Network ~-~-> Cellular ===
450 +=== 3.4.4 Network ~-~-> Cellular ===
481 481  
482 482  
483 483  In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
... ... @@ -487,32 +487,22 @@
487 487  [[image:image-20230228115126-1.png]]
488 488  
489 489  
490 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
460 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
491 491  
492 492  [[image:image-20230228115535-2.png||height="478" width="888"]]
493 493  
494 494  
495 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
465 +== 3.5 System ==
496 496  
497 -**[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]**
467 +=== 3.5.1 System ~-~-> System Overview ===
498 498  
499 -(% class="wikigeneratedid" id="H5.MQTTForwarder" %)
500 -(% id="cke_bm_4823S" style="display:none" %)
501 501  
502 -When cellular fails to connect or has problems, users can refer to this link to (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)Trouble Shooting(%%):**[[How to Trouble Shooting if Cellular connection fails>>https://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20cellular%20network%20connection/#H2.2ForLPS8v22FMS48-LR]]**
503 -
504 -
505 -== 3.6 System ==
506 -
507 -=== 3.6.1 System ~-~-> System Overview ===
508 -
509 -
510 510  Shows the system info:
511 511  
512 -[[image:image-20231031162854-1.png]]
472 +[[image:image-20220917144512-5.png||height="618" width="853"]]
513 513  
514 514  
515 -=== 3.6.2 System ~-~-> System General ===
475 +=== 3.5.2 System ~-~-> System General ===
516 516  
517 517  
518 518  In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
... ... @@ -522,29 +522,15 @@
522 522  [[image:image-20230214094058-3.png]]
523 523  
524 524  
525 -=== 3.6.3 System ~-~-> Backup/Restore ===
485 +=== 3.5.3 System ~-~-> Backup/Restore ===
526 526  
527 527  
528 -[[image:image-20231031162927-2.png]]
488 +[[image:image-20220917144725-6.png||height="208" width="869"]]
529 529  
530 -=== 3.6.4 System ~-~-> Reboot / Reset ===
531 531  
532 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
491 +=== 3.5.4 System ~-~-> Remoteit ===
533 533  
534 -ETH LED will SOLID BULE Until the restore is finished.
535 535  
536 -When the gateway restores the factory settings is complete,
537 -
538 -The WiFi configuration will enable WiFi Access Point by default.
539 -
540 -The other configuration will be restored to the default configuration.
541 -
542 -[[image:image-20240203172853-1.png||height="365" width="901"]]
543 -
544 -
545 -=== 3.6.5 System ~-~-> Remoteit ===
546 -
547 -
548 548  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
549 549  
550 550  
... ... @@ -553,7 +553,7 @@
553 553  [[image:image-20221230092303-2.png]]
554 554  
555 555  
556 -=== 3.6.6 System ~-~-> Package Management ===
502 +=== 3.5.5 System ~-~-> Package Management ===
557 557  
558 558  
559 559  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -561,116 +561,102 @@
561 561  [[image:image-20230214094316-4.png]]
562 562  
563 563  
564 -== 3.7 Logread ==
510 += 4. Build-in Server =
565 565  
566 -=== 3.7.1 LoRa Log ===
567 567  
513 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
568 568  
569 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
515 +[[image:image-20230616175617-8.png||height="390" width="894"]]
570 570  
571 -[[image:image-20240416112509-1.png]]
517 +[[image:image-20230616175558-7.png||height="362" width="894"]]
572 572  
573 573  
574 -=== 3.7.2 Gateway Traffic ===
575 575  
576 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
521 +(% style="color:red" %)**Note:**
577 577  
578 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
523 + **Path**: Server ~-~-> Network Server
579 579  
525 + Server ~-~-> Application Server
580 580  
581 -=== 3.7.3 System Log ===
582 582  
583 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
528 +**Troubleshooting:**
584 584  
585 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
586 586  
531 +**~ 1. URL does not jump properly**
587 587  
588 -=== 3.7.4 Record Log ===
533 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
589 589  
590 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
535 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
591 591  
592 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
593 593  
538 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
594 594  
595 595  
596 -= 4. Build-in Server =
541 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
597 597  
598 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
543 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
599 599  
600 -(% style="color:red" %)**Note: LPS8V2 has built-in chirpstack based on Docker, so customers do not need to install it manually again**
601 601  
546 +Login account:
602 602  
603 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
548 +**Username : ** (% style="background-color:yellow" %)**admin**
604 604  
605 -[[image:image-20231106180816-4.png||height="416" width="896"]]
550 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
606 606  
607 -[[image:image-20231201165904-1.png||height="466" width="899"]]
552 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
608 608  
609 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
610 610  
611 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
612 612  
556 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
613 613  
614 614  
615 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
559 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
616 616  
561 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
617 617  
618 -[[image:image-20230616175558-7.png||height="362" width="894"]]
563 +[[image:image-20230321092456-1.png]]
619 619  
620 -[[image:image-20231201170355-2.png||height="536" width="899"]]
621 621  
622 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
566 +== 4.2 Application Server ~-~- Node-Red ==
623 623  
624 624  
569 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
625 625  
626 -== **3). Troubleshooting:** ==
627 627  
572 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
628 628  
629 -* (((
630 -=== ** If the URL does not jump properly.** ===
631 -)))
632 632  
633 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
575 +[[image:image-20220725172124-3.png||height="610" width="843"]]
634 634  
635 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
636 636  
637 637  
638 -* (((
639 -=== ** How to install InfluxDB, Garfana.** ===
640 -)))
579 +=== **Using Node-Red, InfluxDB and Grafana** ===
641 641  
642 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
581 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
643 643  
644 644  
645 -* (((
646 -=== ** How to upgrade the gateway node.js to the latest version.** ===
647 -)))
584 +the users can refer to this link to install them.
648 648  
649 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
586 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
650 650  
651 651  
652 -* (((
653 -=== ** How to batch register device on the built-in Chirpstack network server** ===
654 -)))
589 +=== **Upgrade the node.js** ===
655 655  
656 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
591 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
657 657  
658 658  
659 -* (((
660 -=== ** Why my gateway is not Chirpstack?** ===
661 -)))
594 +the users can refer to this link to upgrade them.
662 662  
663 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
596 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
664 664  
665 665  
666 -* (((
667 -=== ** How to disable the built-in server** ===
668 -)))
599 +== 4.3 How to disable the built-in server ==
669 669  
601 +
602 +Use the following commands to start and stop the TTNv3 service:
603 +
670 670  (% class="box infomessage" %)
671 671  (((
672 -Use the following commands to start and stop the TTNv3 service:**     **
673 -
674 674  **# start**
675 675  systemctl start ttnstack
676 676  
... ... @@ -684,10 +684,10 @@
684 684  systemctl disable ttnstack
685 685  )))
686 686  
687 -(% class="box infomessage" %)
688 -(((
689 689  Use the following commands to start and stop the Node-Red service:
690 690  
621 +(% class="box infomessage" %)
622 +(((
691 691  **# start**
692 692  systemctl start nodered
693 693  
... ... @@ -701,42 +701,35 @@
701 701  systemctl disable nodered
702 702  )))
703 703  
704 -* (((
705 -=== ** How to choose the Chirpstack server frequency SubBand** ===
706 -)))
707 707  
708 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
637 +== 4.4 How to use ChirpStack on LPS8-V2 ==
709 709  
710 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
711 711  
712 -[[image:image-20230602140406-3.png||height="480" width="918"]]
640 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
713 713  
642 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
714 714  
715 -When the configuration is complete, click** "Save&Apply"**.
716 716  
645 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
717 717  
718 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
719 719  
720 -[[image:image-20230602143122-4.png||height="511" width="983"]]
648 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
721 721  
650 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
722 722  
652 +[[image:image-20230602140406-3.png||height="480" width="918"]]
723 723  
724 -= 5. Watch Dog =
725 725  
655 +When the configuration is complete, click** "Save&Apply"**.
726 726  
727 -The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
728 728  
658 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
729 729  
730 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
660 +[[image:image-20230602143122-4.png||height="511" width="983"]]
731 731  
732 -The uses can be via the below method to enable Watch Dog:
733 733  
734 -(% class="box infomessage" %)
735 -(((
736 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
737 -)))
663 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
738 738  
739 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
740 740  
741 741  
742 742  = 6. How users can access LPS8-V2 using serial USB =
... ... @@ -744,6 +744,7 @@
744 744  
745 745  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
746 746  
672 +
747 747  Port 1 of the UART on the LPS8-V2 is GND
748 748  
749 749  (% class="box infomessage" %)
... ... @@ -755,8 +755,10 @@
755 755  **GND <~-~--> GND (Black line)**
756 756  )))
757 757  
684 +
758 758  **LPS8v2 UART connection photo**
759 759  
687 +
760 760  [[image:image-20230421094319-2.png||height="351" width="392"]]
761 761  
762 762  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -792,6 +792,7 @@
792 792  
793 793  1). Using the Linux command to upgrade the system
794 794  
723 +
795 795  (% class="box infomessage" %)
796 796  (((
797 797  **apt update && apt install *dragino***
... ... @@ -800,312 +800,17 @@
800 800  
801 801  2). Upgrade the system via the Web page button of "Manual Update"
802 802  
803 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
804 804  
733 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
734 +
805 805  [[image:image-20230607093849-1.png]]
806 806  
807 807  
808 -= (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)8 How do I view gateway logs(%%) =
738 += 8. FAQ =
809 809  
810 -=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)8.1 LoRaWAN Log:(%%) ===
740 +== 8.1 How to change Hostname ==
811 811  
812 812  
813 -==== Semtech UDP Log : ====
814 -
815 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
816 -
817 -[[image:image-20231017112115-2.png||height="611" width="821"]]
818 -
819 -
820 -==== Station Log: ====
821 -
822 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
823 -
824 -[[image:image-20231017111606-1.png||height="622" width="821"]]
825 -
826 -
827 -=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)8.2  4G Log(%%) ===
828 -
829 -
830 -User needs to access the Linux console of the gateway and enter the following command:
831 -
832 -(% class="box infomessage" %)
833 -(((
834 -cat /var/log/qmilog.txt
835 -)))
836 -
837 -[[image:image-20231017114417-3.png||height="543" width="679"]]
838 -
839 -
840 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
841 -
842 -Below are some commands as reference:
843 -
844 ->Usage:  /usr/bin/quectel-CM [options]
845 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
846 -> -p pincode Verify sim card pin if sim card is locked
847 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
848 -> -f logfilename Save log message of this program to file
849 -> -u usbmonlog filename  Save usbmon log to file
850 -> -i interface Specify which network interface to setup data call when multi-modems exits
851 -> -4 Setup IPv4 data call (default)
852 -> -6 Setup IPv6 data call
853 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
854 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
855 -> -b Enable network interface bridge function (default 0)
856 -> -v Verbose log mode, for debug purpose.[Examples]
857 ->Example 1: /usr/bin/quectel-CM
858 ->Example 2: /usr/bin/quectel-CM -s 3gnet
859 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
860 -
861 -
862 -
863 -=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)8.3 Dmesg Log(%%) ===
864 -
865 -
866 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
867 -
868 -[[image:image-20231017115330-5.png||height="565" width="740"]]
869 -
870 -
871 -=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)8.4 Record Log(%%) ===
872 -
873 -
874 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
875 -
876 -[[image:image-20231017115124-4.png||height="215" width="880"]]
877 -
878 -
879 -=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)8.5 View gateway logs via Linux Command(%%) ===
880 -
881 -
882 -**Semtech UDP Log :**
883 -
884 -(% class="box infomessage" %)
885 -(((
886 -**journalctl -u draginofwd -f**
887 -)))
888 -
889 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
890 -
891 -
892 -**Station Log:**
893 -
894 -(% class="box infomessage" %)
895 -(((
896 -**tail -f /var/log/station.log **
897 -)))
898 -
899 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
900 -
901 -
902 -**Dmesg Log:**
903 -
904 -(% class="box infomessage" %)
905 -(((
906 -**dmesg**
907 -)))
908 -
909 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
910 -
911 -
912 -**SysLog :**
913 -
914 -(% class="box infomessage" %)
915 -(((
916 -**tail -f /var/log/syslog **
917 -)))
918 -
919 -[[image:1754364208742-890.png||height="295" width="1023"]]
920 -
921 -(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
922 -= (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)9. More Services(%%) =
923 -
924 -== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)9.1 NTP Service/Time Synchronization(%%) ==
925 -
926 -The gateway time sync service is provided by chrony service
927 -
928 -
929 -=== 1). Modify the NTP server address: ===
930 -
931 -(% class="box infomessage" %)
932 -(((
933 -Configuration file path:  /etc/chrony/chrony.conf
934 -)))
935 -
936 -
937 -=== 2). Start/Stop/Enable/Disable NTP service: ===
938 -
939 -(% class="box infomessage" %)
940 -(((
941 -systemctl start chrony
942 -\\systemctl stop chrony
943 -\\systemctl disable chrony
944 -\\systemctl enable chrony
945 -)))
946 -
947 -
948 -(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
949 -= (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10. More features(%%) =
950 -
951 -(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
952 -== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)10.1 Chirpstack MQTT Forwarder(%%) ==
953 -
954 -
955 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
956 -
957 -
958 -(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
959 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
960 -
961 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
962 -
963 -(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
964 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
965 -
966 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
967 -* Configure the following settings:
968 -** **Service Provider:** //Custom / Private LoRaWAN//
969 -** **Server Address:** localhost
970 -** **Uplink Port:** 1700
971 -** **Downlink Port:** 1700
972 -* Click **Save & Apply**
973 -
974 -[[image:image-20240518145929-2.png||height="652" width="727"]]
975 -
976 -
977 -(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
978 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
979 -
980 -
981 -(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
982 -(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
983 -
984 -First you must login into the gateway using SSH:
985 -
986 -(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
987 -(((
988 -ssh root@GATEWAY-IP-ADDRESS
989 -)))
990 -
991 -(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
992 -The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
993 -
994 -
995 -(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
996 -(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
997 -
998 -(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
999 -Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
1000 -
1001 -(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
1002 -(((
1003 -cd /tmp
1004 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
1005 -)))
1006 -
1007 -
1008 -(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
1009 -(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
1010 -
1011 -Use the dpkg package-manager to install the downloaded package. Example:
1012 -
1013 -(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
1014 -(((
1015 -dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
1016 -)))
1017 -
1018 -[[image:image-20240518152148-4.png]]
1019 -
1020 -
1021 -(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
1022 -**Configuration**
1023 -
1024 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
1025 -
1026 -(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
1027 -This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1028 -
1029 -
1030 -**ChirpStack MQTT Forwarder Setting:**
1031 -
1032 -(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1033 -(((
1034 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
1035 -
1036 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1037 -)))
1038 -
1039 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1040 -
1041 -
1042 -Use commands to modify configuration files:
1043 -
1044 -(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1045 -(((
1046 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1047 -)))
1048 -
1049 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1050 -
1051 -
1052 -**(Re)start and stop commands**
1053 -
1054 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1055 -
1056 -(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1057 -(((
1058 -# start
1059 -
1060 -(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1061 -systemctl start chirpstack-mqtt-forwarder
1062 -
1063 -# stop
1064 -
1065 -systemctl stop chirpstack-mqtt-forwarder
1066 -
1067 -# restart
1068 -
1069 -systemctl restart chirpstack-mqtt-forwarder
1070 -)))
1071 -
1072 -(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1073 -(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1074 -
1075 -
1076 -**Check result**
1077 -
1078 -(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1079 -Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
1080 -
1081 -[[image:image-20240518154223-5.png]]
1082 -
1083 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1084 -
1085 -
1086 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.2 As a Data-only hotspot connect the helium blockchain(%%) ==
1087 -
1088 -
1089 -(% class="box infomessage" %)
1090 -(((
1091 -(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1092 -apt update && apt install helium-gateway
1093 -)))
1094 -
1095 -
1096 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.3 (%%)How does LPS8v2 filter unwanted lorawan packets ==
1097 -
1098 -
1099 -This feature is to filter the unwanted LoRaWAN packets. Purpose is to save the upstream traffic especially for a 4G cellular connection.
1100 -
1101 -Please refer to the link below for specific usage：**[[Filter unwanted LoRaWAN packets>>https://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]**
1102 -
1103 -
1104 -= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11. FAQ(%%) =
1105 -
1106 -== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)11.1 How to change Hostname(%%) ==
1107 -
1108 -
1109 1109  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
1110 1110  
1111 1111  (% class="box infomessage" %)
... ... @@ -1118,90 +1118,45 @@
1118 1118  After the configuration is complete, run "reboot" to restart the gateway.
1119 1119  
1120 1120  
1121 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
755 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
1122 1122  
1123 1123  
1124 1124  Migrate guide:
1125 1125  
1126 -To stabilize the completion of the migration, The users can migrate in one of the following ways
760 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
1127 1127  
1128 -**Method 1. Using the Linux shell, **
762 +**2. On the Server ~-~-> Network Server interface, click "Management"**
1129 1129  
1130 -**Method 2. Flash a new image with the Chirpstack**
764 +[[image:image-20230616162454-1.png]]
1131 1131  
1132 1132  
1133 -=== Method 1: Using the Linux shell ===
767 +**3. Click "Migrate-Chirpstack"**
1134 1134  
1135 -(% class="box infomessage" %)
1136 -(((
1137 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1138 -)))
769 +[[image:image-20230616162742-2.png]]
1139 1139  
1140 1140  
1141 -=== Method 2: Flash a new image ===
772 +**4. Strat Install **
1142 1142  
1143 -Image flash steps:** [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]**
1144 1144  
775 +Click start Install and wait until the migration succeeds
1145 1145  
1146 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
777 +[[image:image-20230616162934-3.png]]
1147 1147  
1148 1148  
1149 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
780 +**5.Migration complete check result**
1150 1150  
1151 -[[image:image-20230719100239-1.png||height="724" width="994"]]
782 +[[image:image-20230616174526-4.png||height="706" width="983"]]
1152 1152  
1153 1153  
1154 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
785 +[[image:image-20230616180004-9.png]]
1155 1155  
1156 -[[image:image-20230719100332-2.png]]
1157 1157  
1158 1158  
1159 -3. Disable the auto-update:
789 += 9. Trouble Shooting =
1160 1160  
1161 -[[image:image-20230719100419-3.png||height="458" width="995"]]
791 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1162 1162  
1163 1163  
1164 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
1165 -
1166 -
1167 -By default, the LPS8v2's built-in server is ChirpStack v4,
1168 -
1169 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1170 -
1171 -**[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]**
1172 -
1173 -
1174 -Image flash steps: **[[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]**
1175 -
1176 -
1177 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).5 (%%)How to check my USB port dev/tty after i plug in USB device. ==
1178 -
1179 -
1180 -When an external USB device is connected to LPS8v2, the user can access the Linux console of the LPS8v2 gateway and run the following command to check the USB port dev/tty:
1181 -
1182 -(% class="box infomessage" %)
1183 -(((
1184 -dmesg
1185 -)))
1186 -
1187 -[[image:image-20240803095144-1.png]]
1188 -
1189 -
1190 -
1191 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).6 DIN Mount Reference:(%%) ==
1192 -
1193 -
1194 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1195 -
1196 -[[image:image-20240318095617-2.png]]
1197 -
1198 -
1199 -
1200 -
1201 -= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12. Trouble Shooting(%%) =
1202 -
1203 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)12.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1204 -
1205 1205  [[image:image-20220920135918-1.png]]
1206 1206  
1207 1207  
... ... @@ -1217,7 +1217,7 @@
1217 1217  [[image:image-20220920141936-2.png]]
1218 1218  
1219 1219  
1220 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
809 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1221 1221  
1222 1222  
1223 1223  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -1225,13 +1225,13 @@
1225 1225  [[image:image-20230508171607-1.png]]
1226 1226  
1227 1227  
1228 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
817 +== 9.3  Fallback IP does not work, how can users check ==
1229 1229  
1230 1230  
1231 1231  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1232 1232  
1233 1233  
1234 -**~1. Check whether the configuration is correct**
823 +**1.Check whether the configuration is correct**
1235 1235  
1236 1236  Run the CMD command to ipconfig and ping 172.31.255.254.
1237 1237  
... ... @@ -1247,7 +1247,7 @@
1247 1247  If the firewall is not down, this will affect access to the gateway.
1248 1248  
1249 1249  
1250 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
839 +== 9.4  Click "Manual_Update", why there is no response? ==
1251 1251  
1252 1252  
1253 1253  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -1256,94 +1256,10 @@
1256 1256  [[image:image-20230527090555-3.png||height="660" width="832"]]
1257 1257  
1258 1258  
1259 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
848 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1260 1260  
1261 1261  
1262 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1263 -
1264 -(% class="box infomessage" %)
1265 1265  (((
1266 -apt update && apt install *dragino*
1267 -
1268 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1269 -)))
1270 -
1271 -
1272 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1273 -
1274 -
1275 -**1) Build-in The Things Network**
1276 -
1277 -Refer to this link to delete the Built-in server's device.
1278 -
1279 -**[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]**
1280 -
1281 -
1282 -**2) Build-in Chirpstack**
1283 -
1284 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1285 -
1286 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1287 -
1288 -
1289 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).7  (%%)How to check the Storage of the gateway ==
1290 -
1291 -
1292 -Run the following command on the command line interface of the gateway to check the disk space usage:
1293 -
1294 -(% class="box infomessage" %)
1295 -(((
1296 -df -h
1297 -)))
1298 -
1299 -[[image:image-20250207145702-2.png]]
1300 -
1301 -On the Linux console of the gateway, enter the following command to check the total disk space occupied by the files running on the gateway:
1302 -
1303 -(% class="box infomessage" %)
1304 -(((
1305 -du -sh /usr/local/ /usr/* /var/*
1306 -)))
1307 -
1308 -[[image:image-20250207145617-1.png]]
1309 -
1310 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).8  (%%)How to clear the local server cache of the gateway using the command ==
1311 -
1312 -Use the following commands to clear the local server cache:
1313 -
1314 -(% class="box infomessage" %)
1315 -(((
1316 -**#Stop the chirpstack service**
1317 -
1318 -systemctl stop chirpstack
1319 -
1320 -
1321 -**#Stop the redis container**
1322 -
1323 -docker stop chirpstack_redis_1
1324 -
1325 -
1326 -**#Remove the Redis container**
1327 -
1328 -docker-compose -f /usr/local/chirpstack/docker-compose.yml rm -f redis
1329 -
1330 -
1331 -**#Remove the Redis data volume**
1332 -
1333 -docker volume rm chirpstack_redisdata
1334 -
1335 -
1336 -**#start the chirpstack service**
1337 -
1338 -systemctl start chirpstack
1339 -)))
1340 -
1341 -
1342 -
1343 -= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)13. Supports(%%) =
1344 -
1345 -
1346 -(((
1347 1347  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1348 1348  )))
1349 1349  
... ... @@ -1351,7 +1351,7 @@
1351 1351  With your question as detailed as possible. We will reply and help you in the shortest.
1352 1352  
1353 1353  
1354 -= (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)14. Reference(%%) =
859 += 11. Reference =
1355 1355  
1356 1356  
1357 1357  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -1360,7 +1360,7 @@
1360 1360  
1361 1361  )))
1362 1362  
1363 -= (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)15. Order Info(%%) =
868 += 12. Order Info =
1364 1364  
1365 1365  
1366 1366  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1392,7 +1392,7 @@
1392 1392  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1393 1393  
1394 1394  
1395 -= (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)16. Manufacturer Info(%%) =
900 += 13. Manufacturer Info =
1396 1396  
1397 1397  
1398 1398  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1402,7 +1402,7 @@
1402 1402  LongCheng Street, LongGang District ; Shenzhen 518116,China
1403 1403  
1404 1404  
1405 -= (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)17. FCC Warning(%%) =
910 += 14. FCC Warning =
1406 1406  
1407 1407  
1408 1408  (((
1754364208742-890.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -158.1 KB
Content
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -71.7 KB
Content
image-20240803095144-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.0 KB
Content
image-20240831151427-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
image-20240831152113-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
image-20240902092034-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -69.4 KB
Content
image-20241231151434-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20241231151512-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20241231151635-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20241231151810-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.3 KB
Content
image-20241231151939-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -502.1 KB
Content
image-20241231152015-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -502.0 KB
Content
image-20241231153425-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -1.4 MB
Content
image-20250207145617-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.8 KB
Content
image-20250207145702-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -42.7 KB
Content