Skip to Content
Last modified by Kilight Cao on 2025/08/05 11:24
From version 353.1
edited by Kilight Cao
on 2025/08/05 11:23
Change comment: Uploaded new attachment "1754364208742-890.png", version {1}
To version 234.1
edited by Xiaoye
on 2023/07/19 10:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -1,4 +1,5 @@
1 -[[image:image-20220620202334-2.png||data-xwiki-image-style-alignment="center" height="467" width="809"]]
1 +(% style="text-align:center" %)
2 +[[image:image-20220620202334-2.png||height="467" width="809"]]
2 2  
3 3  
4 4  (((
... ... @@ -7,7 +7,7 @@
7 7  
8 8  )))
9 9  
10 -**Table of Contents:**
11 +**Table of Contents：**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -17,7 +17,7 @@
17 17  
18 18  = 1. Introduction =
19 19  
20 -== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
21 +== 1.1 What is LPS8v2 ==
21 21  
22 22  
23 23  (((
... ... @@ -30,7 +30,7 @@
30 30  )))
31 31  
32 32  (((
33 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server ChirpStack-V4 and IoT server Node-red**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 34  )))
35 35  
36 36  (((
... ... @@ -42,7 +42,6 @@
42 42  )))
43 43  
44 44  
45 -
46 46  == 1.2 Specifications ==
47 47  
48 48  
... ... @@ -81,7 +81,7 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 87  == 1.4 LED Indicators ==
... ... @@ -96,16 +96,16 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
107 107  
108 -== 1.5 Button Instruction ==
108 +== 1.5 Button Intruction ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -121,18 +121,6 @@
121 121   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 136  = 2. Quick Start =
137 137  
138 138  
... ... @@ -160,6 +160,7 @@
160 160  [[image:image-20230527085250-2.png||height="495" width="284"]]
161 161  
162 162  
151 +
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,6 +174,7 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
166 +
177 177  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
179 179  
... ... @@ -197,7 +197,7 @@
197 197  
198 198  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
190 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 201  
202 202  
203 203  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -205,6 +205,7 @@
205 205  [[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
207 207  
198 +
208 208  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -213,18 +213,19 @@
213 213  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
214 214  
215 215  
216 -[[image:image-20241231151635-3.png||height="481" width="944"]]
207 +[[image:image-20220622102702-6.png]]
217 217  
218 218  
219 219  
220 220  **Wi-Fi configuration successful**
221 221  
222 -[[image:image-20241231151810-4.png||height="487" width="947"]]
223 223  
214 +[[image:image-20220622102847-7.png]]
224 224  
225 -[[image:image-20241231152015-6.png||height="506" width="1001"]]
226 226  
217 +[[image:image-20220622102901-8.png||height="476" width="938"]]
227 227  
219 +
228 228  === 2.1.2 Access Configure Web UI ===
229 229  
230 230  
... ... @@ -243,7 +243,7 @@
243 243  
244 244  (% style="color:blue" %)**Password:   dragino**
245 245  
246 -[[image:image-20240318160845-1.png]]
238 +[[image:image-20230106153501-1.png||height="367" width="894"]]
247 247  
248 248  
249 249  == 2.2  Typical Network Setup ==
... ... @@ -275,7 +275,7 @@
275 275  
276 276  The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
277 277  
278 -[[image:image-20241231151512-2.png]]
270 +[[image:image-20230411095739-1.png||height="264" width="691"]]
279 279  
280 280  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
281 281  
... ... @@ -295,7 +295,7 @@
295 295  Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
296 296  
297 297  
298 -[[image:image-20241231153425-1.jpeg||height="262" width="884"]]
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
299 299  
300 300  
301 301  The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
... ... @@ -306,12 +306,6 @@
306 306  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
307 307  
308 308  
309 -(% style="color:red" %)**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
310 -
311 -
312 -When cellular fails to connect or has problems, users can refer to this link to (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)Trouble Shooting(%%):**[[How to Trouble Shooting if Cellular connection fails>>https://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20cellular%20network%20connection/#H2.2ForLPS8v22FMS48-LR]]**
313 -
314 -
315 315  === 2.2.5  Check Internet connection ===
316 316  
317 317  
... ... @@ -405,7 +405,7 @@
405 405  
406 406  
407 407  (% class="wikigeneratedid" %)
408 -[[image:image-20220616110739-1.png||height="457" width="836"]]
394 +[[image:image-20220616110739-1.png||height="372" width="682"]]
409 409  
410 410  
411 411  (((
... ... @@ -435,40 +435,25 @@
435 435  
436 436  (((
437 437  Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
438 -
439 -
440 -== (% style="color:inherit; font-family:inherit; font-size:26px" %)3.4  Forwarder(%%) ==
441 441  )))
442 442  
443 -=== 3.4.1 Forwarder ~-~-> MQTT Forwarder ===
444 444  
427 +== 3.4 Network Settings ==
445 445  
446 -In the latest version, MQTT Forwarder functionality has been added to the LPS8V2 gateway by default
429 +=== 3.4.1 Network ~-~-> WiFi ===
447 447  
448 -Users can configure the MQTT Forwarder on the **Forwarder~-~->MQTT** interface, and when the configuration is successful, it will forward the sensor data of the lorawan server chirpstack built in LPS8v2
449 -
450 -For a detailed example of this feature, see this link:**[[MQTT Forward Instruction - DRAGINO>>http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/#H3.3A0UseLoRaWANProtocolforcommunication--ForLPS8V2]]**
451 -
452 -(% class="wikigeneratedid" %)
453 -[[image:image-20240902092034-1.png]]
454 -
455 -
456 -== 3.5 Network Settings ==
457 -
458 -=== 3.5.1 Network ~-~-> WiFi ===
459 -
460 460  Users can configure the wifi WAN and enable Wifi Access Point on this interface
461 461  
462 -[[image:image-20241231151434-1.png||height="608" width="1195"]]
433 +[[image:image-20230619095946-1.png||height="332" width="827"]]
463 463  
464 464  
465 -=== 3.5.2 Network ~-~-> System Status ===
436 +=== 3.4.2 Network ~-~-> System Status ===
466 466  
467 467  
468 468  [[image:image-20220820134112-2.png||height="539" width="668"]]
469 469  
470 470  
471 -=== 3.5.3 Network ~-~-> Network ===
442 +=== 3.4.3 Network ~-~-> Network ===
472 472  
473 473  
474 474  In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
... ... @@ -476,7 +476,7 @@
476 476  [[image:image-20230214093657-2.png||height="333" width="858"]]
477 477  
478 478  
479 -=== 3.5.4 Network ~-~-> Cellular ===
450 +=== 3.4.4 Network ~-~-> Cellular ===
480 480  
481 481  
482 482  In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
... ... @@ -493,25 +493,20 @@
493 493  
494 494  Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
495 495  
496 -**[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]**
467 +Reduce data method
497 497  
498 -(% class="wikigeneratedid" id="H5.MQTTForwarder" %)
499 -(% id="cke_bm_4823S" style="display:none" %)
500 500  
501 -When cellular fails to connect or has problems, users can refer to this link to (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)Trouble Shooting(%%):**[[How to Trouble Shooting if Cellular connection fails>>https://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20cellular%20network%20connection/#H2.2ForLPS8v22FMS48-LR]]**
470 +== 3.5 System ==
502 502  
472 +=== 3.5.1 System ~-~-> System Overview ===
503 503  
504 -== 3.6 System ==
505 505  
506 -=== 3.6.1 System ~-~-> System Overview ===
507 -
508 -
509 509  Shows the system info:
510 510  
511 -[[image:image-20231031162854-1.png]]
477 +[[image:image-20220917144512-5.png||height="618" width="853"]]
512 512  
513 513  
514 -=== 3.6.2 System ~-~-> System General ===
480 +=== 3.5.2 System ~-~-> System General ===
515 515  
516 516  
517 517  In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
... ... @@ -521,29 +521,15 @@
521 521  [[image:image-20230214094058-3.png]]
522 522  
523 523  
524 -=== 3.6.3 System ~-~-> Backup/Restore ===
490 +=== 3.5.3 System ~-~-> Backup/Restore ===
525 525  
526 526  
527 -[[image:image-20231031162927-2.png]]
493 +[[image:image-20220917144725-6.png||height="208" width="869"]]
528 528  
529 -=== 3.6.4 System ~-~-> Reboot / Reset ===
530 530  
531 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
496 +=== 3.5.4 System ~-~-> Remoteit ===
532 532  
533 -ETH LED will SOLID BULE Until the restore is finished.
534 534  
535 -When the gateway restores the factory settings is complete,
536 -
537 -The WiFi configuration will enable WiFi Access Point by default.
538 -
539 -The other configuration will be restored to the default configuration.
540 -
541 -[[image:image-20240203172853-1.png||height="365" width="901"]]
542 -
543 -
544 -=== 3.6.5 System ~-~-> Remoteit ===
545 -
546 -
547 547  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
548 548  
549 549  
... ... @@ -552,7 +552,7 @@
552 552  [[image:image-20221230092303-2.png]]
553 553  
554 554  
555 -=== 3.6.6 System ~-~-> Package Management ===
507 +=== 3.5.5 System ~-~-> Package Management ===
556 556  
557 557  
558 558  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -560,116 +560,103 @@
560 560  [[image:image-20230214094316-4.png]]
561 561  
562 562  
563 -== 3.7 Logread ==
515 += 4. Build-in Server =
564 564  
565 -=== 3.7.1 LoRa Log ===
566 566  
518 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
567 567  
568 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
520 +[[image:image-20230616175617-8.png||height="390" width="894"]]
569 569  
570 -[[image:image-20240416112509-1.png]]
522 +[[image:image-20230616175558-7.png||height="362" width="894"]]
571 571  
572 572  
573 -=== 3.7.2 Gateway Traffic ===
574 574  
575 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
526 +(% style="color:red" %)**Note:**
576 576  
577 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
528 + **Path**: Server ~-~-> Network Server
578 578  
530 + Server ~-~-> Application Server
579 579  
580 -=== 3.7.3 System Log ===
581 581  
582 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
533 +**Troubleshooting:**
583 583  
584 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
585 585  
536 +**~ 1. URL does not jump properly**
586 586  
587 -=== 3.7.4 Record Log ===
538 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
588 588  
589 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
540 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
590 590  
591 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
592 592  
543 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
593 593  
594 594  
595 -= 4. Build-in Server =
546 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
596 596  
597 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
548 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
598 598  
599 -(% style="color:red" %)**Note: LPS8V2 has built-in chirpstack based on Docker, so customers do not need to install it manually again**
600 600  
551 +Login account:
601 601  
602 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
553 +**Username : ** (% style="background-color:yellow" %)**admin**
603 603  
604 -[[image:image-20231106180816-4.png||height="416" width="896"]]
555 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
605 605  
606 -[[image:image-20231201165904-1.png||height="466" width="899"]]
557 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
607 607  
608 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
609 609  
610 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
611 611  
561 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
612 612  
613 613  
614 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
564 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
615 615  
566 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
616 616  
617 -[[image:image-20230616175558-7.png||height="362" width="894"]]
568 +[[image:image-20230321092456-1.png]]
618 618  
619 -[[image:image-20231201170355-2.png||height="536" width="899"]]
620 620  
621 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
622 622  
572 +== 4.2 Application Server ~-~- Node-Red ==
623 623  
624 624  
625 -== **3). Troubleshooting:** ==
575 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
626 626  
627 627  
628 -* (((
629 -=== ** If the URL does not jump properly.** ===
630 -)))
578 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
631 631  
632 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
633 633  
634 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
581 +[[image:image-20220725172124-3.png||height="610" width="843"]]
635 635  
636 636  
637 -* (((
638 -=== ** How to install InfluxDB, Garfana.** ===
639 -)))
640 640  
641 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
585 +=== **Using Node-Red, InfluxDB and Grafana** ===
642 642  
587 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
643 643  
644 -* (((
645 -=== ** How to upgrade the gateway node.js to the latest version.** ===
646 -)))
647 647  
648 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
590 +the users can refer to this link to install them.
649 649  
592 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
650 650  
651 -* (((
652 -=== ** How to batch register device on the built-in Chirpstack network server** ===
653 -)))
654 654  
655 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
595 +=== **Upgrade the node.js** ===
656 656  
597 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
657 657  
658 -* (((
659 -=== ** Why my gateway is not Chirpstack?** ===
660 -)))
661 661  
662 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
600 +the users can refer to this link to upgrade them.
663 663  
602 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
664 664  
665 -* (((
666 -=== ** How to disable the built-in server** ===
667 -)))
668 668  
605 +== 4.3 How to disable the built-in server ==
606 +
607 +
608 +Use the following commands to start and stop the TTNv3 service:
609 +
669 669  (% class="box infomessage" %)
670 670  (((
671 -Use the following commands to start and stop the TTNv3 service:**     **
672 -
673 673  **# start**
674 674  systemctl start ttnstack
675 675  
... ... @@ -683,10 +683,10 @@
683 683  systemctl disable ttnstack
684 684  )))
685 685  
686 -(% class="box infomessage" %)
687 -(((
688 688  Use the following commands to start and stop the Node-Red service:
689 689  
627 +(% class="box infomessage" %)
628 +(((
690 690  **# start**
691 691  systemctl start nodered
692 692  
... ... @@ -700,42 +700,35 @@
700 700  systemctl disable nodered
701 701  )))
702 702  
703 -* (((
704 -=== ** How to choose the Chirpstack server frequency SubBand** ===
705 -)))
706 706  
707 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
643 +== 4.4 How to use ChirpStack on LPS8-V2 ==
708 708  
709 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
710 710  
711 -[[image:image-20230602140406-3.png||height="480" width="918"]]
646 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
712 712  
648 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
713 713  
714 -When the configuration is complete, click** "Save&Apply"**.
715 715  
651 +=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
716 716  
717 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
718 718  
719 -[[image:image-20230602143122-4.png||height="511" width="983"]]
654 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
720 720  
656 +If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
721 721  
658 +[[image:image-20230602140406-3.png||height="480" width="918"]]
722 722  
723 -= 5. Watch Dog =
724 724  
661 +When the configuration is complete, click** "Save&Apply"**.
725 725  
726 -The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
727 727  
664 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
728 728  
729 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
666 +[[image:image-20230602143122-4.png||height="511" width="983"]]
730 730  
731 -The uses can be via the below method to enable Watch Dog:
732 732  
733 -(% class="box infomessage" %)
734 -(((
735 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
736 -)))
669 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
737 737  
738 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
739 739  
740 740  
741 741  = 6. How users can access LPS8-V2 using serial USB =
... ... @@ -791,6 +791,7 @@
791 791  
792 792  1). Using the Linux command to upgrade the system
793 793  
726 +
794 794  (% class="box infomessage" %)
795 795  (((
796 796  **apt update && apt install *dragino***
... ... @@ -799,346 +799,68 @@
799 799  
800 800  2). Upgrade the system via the Web page button of "Manual Update"
801 801  
802 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
803 803  
736 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
737 +
804 804  [[image:image-20230607093849-1.png]]
805 805  
806 806  
807 -= (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)8 How do I view gateway logs(%%) =
808 808  
809 -=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)8.1 LoRaWAN Log:(%%) ===
742 += 8. FAQ =
810 810  
744 +== 8.1 How to change Hostname ==
811 811  
812 -==== Semtech UDP Log : ====
813 813  
814 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
747 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
815 815  
816 -[[image:image-20231017112115-2.png||height="611" width="821"]]
817 -
818 -
819 -==== Station Log: ====
820 -
821 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
822 -
823 -[[image:image-20231017111606-1.png||height="622" width="821"]]
824 -
825 -
826 -=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)8.2  4G Log(%%) ===
827 -
828 -
829 -User needs to access the Linux console of the gateway and enter the following command:
830 -
831 831  (% class="box infomessage" %)
832 832  (((
833 -cat /var/log/qmilog.txt
751 +hostnamectl set-hostname dragino-123456
834 834  )))
835 835  
836 -[[image:image-20231017114417-3.png||height="543" width="679"]]
754 +[[image:image-20230517102429-1.png]]
837 837  
756 +After the configuration is complete, run "reboot" to restart the gateway.
838 838  
839 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
840 840  
841 -Below are some commands as reference:
759 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
842 842  
843 ->Usage:  /usr/bin/quectel-CM [options]
844 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
845 -> -p pincode Verify sim card pin if sim card is locked
846 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
847 -> -f logfilename Save log message of this program to file
848 -> -u usbmonlog filename  Save usbmon log to file
849 -> -i interface Specify which network interface to setup data call when multi-modems exits
850 -> -4 Setup IPv4 data call (default)
851 -> -6 Setup IPv6 data call
852 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
853 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
854 -> -b Enable network interface bridge function (default 0)
855 -> -v Verbose log mode, for debug purpose.[Examples]
856 ->Example 1: /usr/bin/quectel-CM
857 ->Example 2: /usr/bin/quectel-CM -s 3gnet
858 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
859 859  
762 +Migrate guide:
860 860  
764 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
861 861  
862 -=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)8.3 Dmesg Log(%%) ===
766 +**2. On the Server ~-~-> Network Server interface, click "Management"**
863 863  
768 +[[image:image-20230616162454-1.png]]
864 864  
865 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
866 866  
867 -[[image:image-20231017115330-5.png||height="565" width="740"]]
771 +**3. Click "Migrate-Chirpstack"**
868 868  
773 +[[image:image-20230616162742-2.png]]
869 869  
870 -=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)8.4 Record Log(%%) ===
871 871  
776 +**4. Strat Install **
872 872  
873 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
874 874  
875 -[[image:image-20231017115124-4.png||height="215" width="880"]]
779 +Click start Install and wait until the migration succeeds
876 876  
781 +[[image:image-20230616162934-3.png]]
877 877  
878 -=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)8.5 View gateway logs via Linux Command(%%) ===
879 879  
784 +**5.Migration complete check result**
880 880  
881 -**Semtech UDP Log :**
786 +[[image:image-20230616174526-4.png||height="706" width="983"]]
882 882  
883 -(% class="box infomessage" %)
884 -(((
885 -**journalctl -u draginofwd -f**
886 -)))
887 887  
888 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
789 +[[image:image-20230616180004-9.png]]
889 889  
890 890  
891 -**Station Log:**
792 +== 8.3 How to reduce the 4g data consumed ==
892 892  
893 -(% class="box infomessage" %)
894 -(((
895 -**tail -f /var/log/station.log **
896 -)))
897 -
898 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
899 -
900 -
901 -**Dmesg Log:**
902 -
903 -(% class="box infomessage" %)
904 -(((
905 -**dmesg**
906 -)))
907 -
908 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
909 -
910 -
911 -
912 -(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
913 -= (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)9. More Services(%%) =
914 -
915 -== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)9.1 NTP Service/Time Synchronization(%%) ==
916 -
917 -The gateway time sync service is provided by chrony service
918 -
919 -
920 -=== 1). Modify the NTP server address: ===
921 -
922 -(% class="box infomessage" %)
923 -(((
924 -Configuration file path:  /etc/chrony/chrony.conf
925 -)))
926 -
927 -
928 -=== 2). Start/Stop/Enable/Disable NTP service: ===
929 -
930 -(% class="box infomessage" %)
931 -(((
932 -systemctl start chrony
933 -\\systemctl stop chrony
934 -\\systemctl disable chrony
935 -\\systemctl enable chrony
936 -)))
937 -
938 -
939 -(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
940 -= (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10. More features(%%) =
941 -
942 -(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
943 -== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)10.1 Chirpstack MQTT Forwarder(%%) ==
944 -
945 -
946 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
947 -
948 -
949 -(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
950 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
951 -
952 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
953 -
954 -(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
955 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
956 -
957 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
958 -* Configure the following settings:
959 -** **Service Provider:** //Custom / Private LoRaWAN//
960 -** **Server Address:** localhost
961 -** **Uplink Port:** 1700
962 -** **Downlink Port:** 1700
963 -* Click **Save & Apply**
964 -
965 -[[image:image-20240518145929-2.png||height="652" width="727"]]
966 -
967 -
968 -(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
969 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
970 -
971 -
972 -(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
973 -(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
974 -
975 -First you must login into the gateway using SSH:
976 -
977 -(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
978 -(((
979 -ssh root@GATEWAY-IP-ADDRESS
980 -)))
981 -
982 -(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
983 -The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
984 -
985 -
986 -(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
987 -(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
988 -
989 -(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
990 -Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
991 -
992 -(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
993 -(((
994 -cd /tmp
995 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
996 -)))
997 -
998 -
999 -(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
1000 -(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
1001 -
1002 -Use the dpkg package-manager to install the downloaded package. Example:
1003 -
1004 -(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
1005 -(((
1006 -dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
1007 -)))
1008 -
1009 -[[image:image-20240518152148-4.png]]
1010 -
1011 -
1012 -(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
1013 -**Configuration**
1014 -
1015 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
1016 -
1017 -(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
1018 -This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1019 -
1020 -
1021 -**ChirpStack MQTT Forwarder Setting:**
1022 -
1023 -(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1024 -(((
1025 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
1026 -
1027 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1028 -)))
1029 -
1030 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1031 -
1032 -
1033 -Use commands to modify configuration files:
1034 -
1035 -(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1036 -(((
1037 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1038 -)))
1039 -
1040 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1041 -
1042 -
1043 -**(Re)start and stop commands**
1044 -
1045 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1046 -
1047 -(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1048 -(((
1049 -# start
1050 -
1051 -(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1052 -systemctl start chirpstack-mqtt-forwarder
1053 -
1054 -# stop
1055 -
1056 -systemctl stop chirpstack-mqtt-forwarder
1057 -
1058 -# restart
1059 -
1060 -systemctl restart chirpstack-mqtt-forwarder
1061 -)))
1062 -
1063 -(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1064 -(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1065 -
1066 -
1067 -**Check result**
1068 -
1069 -(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1070 -Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
1071 -
1072 -[[image:image-20240518154223-5.png]]
1073 -
1074 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1075 -
1076 -
1077 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.2 As a Data-only hotspot connect the helium blockchain(%%) ==
1078 -
1079 -
1080 -(% class="box infomessage" %)
1081 -(((
1082 -(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1083 -apt update && apt install helium-gateway
1084 -)))
1085 -
1086 -
1087 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.3 (%%)How does LPS8v2 filter unwanted lorawan packets ==
1088 -
1089 -
1090 -This feature is to filter the unwanted LoRaWAN packets. Purpose is to save the upstream traffic especially for a 4G cellular connection.
1091 -
1092 -Please refer to the link below for specific usage：**[[Filter unwanted LoRaWAN packets>>https://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]**
1093 -
1094 -
1095 -= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11. FAQ(%%) =
1096 -
1097 -== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)11.1 How to change Hostname(%%) ==
1098 -
1099 -
1100 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
1101 -
1102 -(% class="box infomessage" %)
1103 -(((
1104 -hostnamectl set-hostname dragino-123456
1105 -)))
1106 -
1107 -[[image:image-20230517102429-1.png]]
1108 -
1109 -After the configuration is complete, run "reboot" to restart the gateway.
1110 -
1111 -
1112 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
1113 -
1114 -
1115 -Migrate guide:
1116 -
1117 -To stabilize the completion of the migration, The users can migrate in one of the following ways
1118 -
1119 -**Method 1. Using the Linux shell, **
1120 -
1121 -**Method 2. Flash a new image with the Chirpstack**
1122 -
1123 -
1124 -=== Method 1: Using the Linux shell ===
1125 -
1126 -(% class="box infomessage" %)
1127 -(((
1128 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1129 -)))
1130 -
1131 -
1132 -=== Method 2: Flash a new image ===
1133 -
1134 -Image flash steps:** [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]**
1135 -
1136 -
1137 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
1138 -
1139 -
1140 1140  1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
1141 1141  
796 +
1142 1142  [[image:image-20230719100239-1.png||height="724" width="994"]]
1143 1143  
1144 1144  
... ... @@ -1146,53 +1146,18 @@
1146 1146  
1147 1147  [[image:image-20230719100332-2.png]]
1148 1148  
1149 -
1150 1150  3. Disable the auto-update:
1151 1151  
1152 1152  [[image:image-20230719100419-3.png||height="458" width="995"]]
1153 1153  
1154 1154  
1155 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
1156 1156  
1157 1157  
1158 -By default, the LPS8v2's built-in server is ChirpStack v4,
811 += 9. Trouble Shooting =
1159 1159  
1160 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
813 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1161 1161  
1162 -**[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]**
1163 1163  
1164 -
1165 -Image flash steps: **[[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]**
1166 -
1167 -
1168 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).5 (%%)How to check my USB port dev/tty after i plug in USB device. ==
1169 -
1170 -
1171 -When an external USB device is connected to LPS8v2, the user can access the Linux console of the LPS8v2 gateway and run the following command to check the USB port dev/tty:
1172 -
1173 -(% class="box infomessage" %)
1174 -(((
1175 -dmesg
1176 -)))
1177 -
1178 -[[image:image-20240803095144-1.png]]
1179 -
1180 -
1181 -
1182 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).6 DIN Mount Reference:(%%) ==
1183 -
1184 -
1185 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1186 -
1187 -[[image:image-20240318095617-2.png]]
1188 -
1189 -
1190 -
1191 -
1192 -= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12. Trouble Shooting(%%) =
1193 -
1194 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)12.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1195 -
1196 1196  [[image:image-20220920135918-1.png]]
1197 1197  
1198 1198  
... ... @@ -1208,7 +1208,7 @@
1208 1208  [[image:image-20220920141936-2.png]]
1209 1209  
1210 1210  
1211 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
831 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1212 1212  
1213 1213  
1214 1214  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -1216,13 +1216,13 @@
1216 1216  [[image:image-20230508171607-1.png]]
1217 1217  
1218 1218  
1219 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
839 +== 9.3  Fallback IP does not work, how can users check ==
1220 1220  
1221 1221  
1222 1222  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1223 1223  
1224 1224  
1225 -**~1. Check whether the configuration is correct**
845 +**1.Check whether the configuration is correct**
1226 1226  
1227 1227  Run the CMD command to ipconfig and ping 172.31.255.254.
1228 1228  
... ... @@ -1238,7 +1238,7 @@
1238 1238  If the firewall is not down, this will affect access to the gateway.
1239 1239  
1240 1240  
1241 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
861 +== 9.4  Click "Manual_Update", why there is no response? ==
1242 1242  
1243 1243  
1244 1244  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -1247,94 +1247,10 @@
1247 1247  [[image:image-20230527090555-3.png||height="660" width="832"]]
1248 1248  
1249 1249  
1250 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
870 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1251 1251  
1252 1252  
1253 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1254 -
1255 -(% class="box infomessage" %)
1256 1256  (((
1257 -apt update && apt install *dragino*
1258 -
1259 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1260 -)))
1261 -
1262 -
1263 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1264 -
1265 -
1266 -**1) Build-in The Things Network**
1267 -
1268 -Refer to this link to delete the Built-in server's device.
1269 -
1270 -**[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]**
1271 -
1272 -
1273 -**2) Build-in Chirpstack**
1274 -
1275 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1276 -
1277 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1278 -
1279 -
1280 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).7  (%%)How to check the Storage of the gateway ==
1281 -
1282 -
1283 -Run the following command on the command line interface of the gateway to check the disk space usage:
1284 -
1285 -(% class="box infomessage" %)
1286 -(((
1287 -df -h
1288 -)))
1289 -
1290 -[[image:image-20250207145702-2.png]]
1291 -
1292 -On the Linux console of the gateway, enter the following command to check the total disk space occupied by the files running on the gateway:
1293 -
1294 -(% class="box infomessage" %)
1295 -(((
1296 -du -sh /usr/local/ /usr/* /var/*
1297 -)))
1298 -
1299 -[[image:image-20250207145617-1.png]]
1300 -
1301 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).8  (%%)How to clear the local server cache of the gateway using the command ==
1302 -
1303 -Use the following commands to clear the local server cache:
1304 -
1305 -(% class="box infomessage" %)
1306 -(((
1307 -**#Stop the chirpstack service**
1308 -
1309 -systemctl stop chirpstack
1310 -
1311 -
1312 -**#Stop the redis container**
1313 -
1314 -docker stop chirpstack_redis_1
1315 -
1316 -
1317 -**#Remove the Redis container**
1318 -
1319 -docker-compose -f /usr/local/chirpstack/docker-compose.yml rm -f redis
1320 -
1321 -
1322 -**#Remove the Redis data volume**
1323 -
1324 -docker volume rm chirpstack_redisdata
1325 -
1326 -
1327 -**#start the chirpstack service**
1328 -
1329 -systemctl start chirpstack
1330 -)))
1331 -
1332 -
1333 -
1334 -= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)13. Supports(%%) =
1335 -
1336 -
1337 -(((
1338 1338  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1339 1339  )))
1340 1340  
... ... @@ -1342,7 +1342,7 @@
1342 1342  With your question as detailed as possible. We will reply and help you in the shortest.
1343 1343  
1344 1344  
1345 -= (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)14. Reference(%%) =
881 += 11. Reference =
1346 1346  
1347 1347  
1348 1348  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -1351,7 +1351,7 @@
1351 1351  
1352 1352  )))
1353 1353  
1354 -= (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)15. Order Info(%%) =
890 += 12. Order Info =
1355 1355  
1356 1356  
1357 1357  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1383,7 +1383,7 @@
1383 1383  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1384 1384  
1385 1385  
1386 -= (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)16. Manufacturer Info(%%) =
922 += 13. Manufacturer Info =
1387 1387  
1388 1388  
1389 1389  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1393,7 +1393,7 @@
1393 1393  LongCheng Street, LongGang District ; Shenzhen 518116,China
1394 1394  
1395 1395  
1396 -= (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)17. FCC Warning(%%) =
932 += 14. FCC Warning =
1397 1397  
1398 1398  
1399 1399  (((
1754364208742-890.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -158.1 KB
Content
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -71.7 KB
Content
image-20240803095144-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.0 KB
Content
image-20240831151427-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
image-20240831152113-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
image-20240902092034-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -69.4 KB
Content
image-20241231151434-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20241231151512-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20241231151635-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20241231151810-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.3 KB
Content
image-20241231151939-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -502.1 KB
Content
image-20241231152015-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -502.0 KB
Content
image-20241231153425-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -1.4 MB
Content
image-20250207145617-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.8 KB
Content
image-20250207145702-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -42.7 KB
Content