Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 343.1 >
edited by Kilight Cao
on 2024/12/31 15:46
To version < 239.1 >
edited by Xiaoye
on 2023/07/31 15:17
>
Change comment: Uploaded new attachment "Delete Device.docx", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
21 +== 1.1 What is LPS8v2 ==
22 22  
23 23  
24 24  (((
... ... @@ -81,7 +81,7 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 87  == 1.4 LED Indicators ==
... ... @@ -96,16 +96,16 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
107 107  
108 -== 1.5 Button Instruction ==
108 +== 1.5 Button Intruction ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -120,19 +120,11 @@
120 120  
121 121   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
123 +(% style="color:red" %)**Note**: Restoring factory Settings does not erase data from the built-in server
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 +See this link for steps on how to clear data from the built-in server:
125 125  
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 127  
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 136  = 2. Quick Start =
137 137  
138 138  
... ... @@ -160,6 +160,7 @@
160 160  [[image:image-20230527085250-2.png||height="495" width="284"]]
161 161  
162 162  
155 +
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,6 +174,7 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
170 +
177 177  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
179 179  
... ... @@ -197,7 +197,7 @@
197 197  
198 198  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
194 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 201  
202 202  
203 203  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -205,6 +205,7 @@
205 205  [[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
207 207  
202 +
208 208  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -213,18 +213,19 @@
213 213  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
214 214  
215 215  
216 -[[image:image-20241231151635-3.png||height="481" width="944"]]
211 +[[image:image-20220622102702-6.png]]
217 217  
218 218  
219 219  
220 220  **Wi-Fi configuration successful**
221 221  
222 -[[image:image-20241231151810-4.png||height="487" width="947"]]
223 223  
218 +[[image:image-20220622102847-7.png]]
224 224  
225 -[[image:image-20241231152015-6.png||height="506" width="1001"]]
226 226  
221 +[[image:image-20220622102901-8.png||height="476" width="938"]]
227 227  
223 +
228 228  === 2.1.2 Access Configure Web UI ===
229 229  
230 230  
... ... @@ -243,7 +243,7 @@
243 243  
244 244  (% style="color:blue" %)**Password:   dragino**
245 245  
246 -[[image:image-20240318160845-1.png]]
242 +[[image:image-20230106153501-1.png||height="367" width="894"]]
247 247  
248 248  
249 249  == 2.2  Typical Network Setup ==
... ... @@ -275,7 +275,7 @@
275 275  
276 276  The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
277 277  
278 -[[image:image-20241231151512-2.png]]
274 +[[image:image-20230411095739-1.png||height="264" width="691"]]
279 279  
280 280  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
281 281  
... ... @@ -295,7 +295,7 @@
295 295  Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
296 296  
297 297  
298 -[[image:image-20241231153425-1.jpeg||height="262" width="884"]]
294 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
299 299  
300 300  
301 301  The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
... ... @@ -306,12 +306,6 @@
306 306  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
307 307  
308 308  
309 -(% style="color:red" %)**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
310 -
311 -
312 -When cellular fails to connect or has problems, users can refer to this link to debug:**[[How to Debug if Cellular connection fails>>https://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20cellular%20network%20connection/#H2.2ForLPS8v22FMS48-LR]]**
313 -
314 -
315 315  === 2.2.5  Check Internet connection ===
316 316  
317 317  
... ... @@ -405,7 +405,7 @@
405 405  
406 406  
407 407  (% class="wikigeneratedid" %)
408 -[[image:image-20220616110739-1.png||height="457" width="836"]]
398 +[[image:image-20220616110739-1.png||height="372" width="682"]]
409 409  
410 410  
411 411  (((
... ... @@ -435,40 +435,25 @@
435 435  
436 436  (((
437 437  Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
438 -
439 -
440 -== (% style="color:inherit; font-family:inherit; font-size:26px" %)3.4  Forwarder(%%) ==
441 441  )))
442 442  
443 -=== 3.4.1 Forwarder ~-~-> MQTT Forwarder ===
444 444  
431 +== 3.4 Network Settings ==
445 445  
446 -In the latest version, MQTT Forwarder functionality has been added to the LPS8V2 gateway by default
433 +=== 3.4.1 Network ~-~-> WiFi ===
447 447  
448 -Users can configure the MQTT Forwarder on the **Forwarder~-~->MQTT** interface, and when the configuration is successful, it will forward the sensor data of the lorawan server chirpstack built in LPS8v2
449 -
450 -For a detailed example of this feature, see this link:**[[MQTT Forward Instruction - DRAGINO>>http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/#H3.3A0UseLoRaWANProtocolforcommunication--ForLPS8V2]]**
451 -
452 -(% class="wikigeneratedid" %)
453 -[[image:image-20240902092034-1.png]]
454 -
455 -
456 -== 3.5 Network Settings ==
457 -
458 -=== 3.5.1 Network ~-~-> WiFi ===
459 -
460 460  Users can configure the wifi WAN and enable Wifi Access Point on this interface
461 461  
462 -[[image:image-20241231151434-1.png||height="608" width="1195"]]
437 +[[image:image-20230619095946-1.png||height="332" width="827"]]
463 463  
464 464  
465 -=== 3.5.2 Network ~-~-> System Status ===
440 +=== 3.4.2 Network ~-~-> System Status ===
466 466  
467 467  
468 468  [[image:image-20220820134112-2.png||height="539" width="668"]]
469 469  
470 470  
471 -=== 3.5.3 Network ~-~-> Network ===
446 +=== 3.4.3 Network ~-~-> Network ===
472 472  
473 473  
474 474  In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
... ... @@ -476,7 +476,7 @@
476 476  [[image:image-20230214093657-2.png||height="333" width="858"]]
477 477  
478 478  
479 -=== 3.5.4 Network ~-~-> Cellular ===
454 +=== 3.4.4 Network ~-~-> Cellular ===
480 480  
481 481  
482 482  In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
... ... @@ -495,21 +495,18 @@
495 495  
496 496  [[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
497 497  
498 -(% class="wikigeneratedid" id="H5.MQTTForwarder" %)
499 -(% id="cke_bm_4823S" style="display:none" %)
500 500  
474 +== 3.5 System ==
501 501  
502 -== 3.6 System ==
476 +=== 3.5.1 System ~-~-> System Overview ===
503 503  
504 -=== 3.6.1 System ~-~-> System Overview ===
505 505  
506 -
507 507  Shows the system info:
508 508  
509 -[[image:image-20231031162854-1.png]]
481 +[[image:image-20220917144512-5.png||height="618" width="853"]]
510 510  
511 511  
512 -=== 3.6.2 System ~-~-> System General ===
484 +=== 3.5.2 System ~-~-> System General ===
513 513  
514 514  
515 515  In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
... ... @@ -519,29 +519,15 @@
519 519  [[image:image-20230214094058-3.png]]
520 520  
521 521  
522 -=== 3.6.3 System ~-~-> Backup/Restore ===
494 +=== 3.5.3 System ~-~-> Backup/Restore ===
523 523  
524 524  
525 -[[image:image-20231031162927-2.png]]
497 +[[image:image-20220917144725-6.png||height="208" width="869"]]
526 526  
527 -=== 3.6.4 System ~-~-> Reboot / Reset ===
528 528  
529 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
500 +=== 3.5.4 System ~-~-> Remoteit ===
530 530  
531 -ETH LED will SOLID BULE Until the restore is finished.
532 532  
533 -When the gateway restores the factory settings is complete,
534 -
535 -The WiFi configuration will enable WiFi Access Point by default.
536 -
537 -The other configuration will be restored to the default configuration.
538 -
539 -[[image:image-20240203172853-1.png||height="365" width="901"]]
540 -
541 -
542 -=== 3.6.5 System ~-~-> Remoteit ===
543 -
544 -
545 545  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
546 546  
547 547  
... ... @@ -550,7 +550,7 @@
550 550  [[image:image-20221230092303-2.png]]
551 551  
552 552  
553 -=== 3.6.6 System ~-~-> Package Management ===
511 +=== 3.5.5 System ~-~-> Package Management ===
554 554  
555 555  
556 556  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -558,114 +558,103 @@
558 558  [[image:image-20230214094316-4.png]]
559 559  
560 560  
561 -== 3.7 Logread ==
519 += 4. Build-in Server =
562 562  
563 -=== 3.7.1 LoRa Log ===
564 564  
522 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
565 565  
566 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
524 +[[image:image-20230616175617-8.png||height="390" width="894"]]
567 567  
568 -[[image:image-20240416112509-1.png]]
526 +[[image:image-20230616175558-7.png||height="362" width="894"]]
569 569  
570 570  
571 -=== 3.7.2 Gateway Traffic ===
572 572  
573 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
530 +(% style="color:red" %)**Note:**
574 574  
575 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
532 + **Path**: Server ~-~-> Network Server
576 576  
534 + Server ~-~-> Application Server
577 577  
578 -=== 3.7.3 System Log ===
579 579  
580 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
537 +**Troubleshooting:**
581 581  
582 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
583 583  
540 +**~ 1. URL does not jump properly**
584 584  
585 -=== 3.7.4 Record Log ===
542 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
586 586  
587 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
544 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
588 588  
589 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
590 590  
547 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
591 591  
592 592  
593 -= 4. Build-in Server =
550 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
594 594  
595 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
552 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
596 596  
597 597  
598 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
555 +Login account:
599 599  
600 -[[image:image-20231106180816-4.png||height="416" width="896"]]
557 +**Username : ** (% style="background-color:yellow" %)**admin**
601 601  
602 -[[image:image-20231201165904-1.png||height="466" width="899"]]
559 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
603 603  
604 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
561 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
605 605  
606 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
607 607  
608 608  
565 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
609 609  
610 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
611 611  
568 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
612 612  
613 -[[image:image-20230616175558-7.png||height="362" width="894"]]
570 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
614 614  
615 -[[image:image-20231201170355-2.png||height="536" width="899"]]
572 +[[image:image-20230321092456-1.png]]
616 616  
617 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
618 618  
619 619  
576 +== 4.2 Application Server ~-~- Node-Red ==
620 620  
621 -== **3). Troubleshooting:** ==
622 622  
579 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
623 623  
624 -* (((
625 -=== ** If the URL does not jump properly.** ===
626 -)))
627 627  
628 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
582 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
629 629  
630 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
631 631  
585 +[[image:image-20220725172124-3.png||height="610" width="843"]]
632 632  
633 -* (((
634 -=== ** How to install InfluxDB, Garfana.** ===
635 -)))
636 636  
637 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
638 638  
589 +=== **Using Node-Red, InfluxDB and Grafana** ===
639 639  
640 -* (((
641 -=== ** How to upgrade the gateway node.js to the latest version.** ===
642 -)))
591 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
643 643  
644 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
645 645  
594 +the users can refer to this link to install them.
646 646  
647 -* (((
648 -=== ** How to batch register device on the built-in Chirpstack network server** ===
649 -)))
596 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
650 650  
651 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
652 652  
599 +=== **Upgrade the node.js** ===
653 653  
654 -* (((
655 -=== ** Why my gateway is not Chirpstack?** ===
656 -)))
601 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
657 657  
658 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
659 659  
604 +the users can refer to this link to upgrade them.
660 660  
661 -* (((
662 -=== ** How to disable the built-in server** ===
663 -)))
606 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
664 664  
608 +
609 +== 4.3 How to disable the built-in server ==
610 +
611 +
612 +Use the following commands to start and stop the TTNv3 service:
613 +
665 665  (% class="box infomessage" %)
666 666  (((
667 -Use the following commands to start and stop the TTNv3 service:**     **
668 -
669 669  **# start**
670 670  systemctl start ttnstack
671 671  
... ... @@ -679,10 +679,10 @@
679 679  systemctl disable ttnstack
680 680  )))
681 681  
682 -(% class="box infomessage" %)
683 -(((
684 684  Use the following commands to start and stop the Node-Red service:
685 685  
631 +(% class="box infomessage" %)
632 +(((
686 686  **# start**
687 687  systemctl start nodered
688 688  
... ... @@ -697,44 +697,36 @@
697 697  )))
698 698  
699 699  
700 -* (((
701 -=== ** How to choose the Chirpstack server frequency SubBand** ===
702 -)))
647 +== 4.4 How to use ChirpStack on LPS8-V2 ==
703 703  
704 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
705 705  
706 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
650 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
707 707  
708 -[[image:image-20230602140406-3.png||height="480" width="918"]]
652 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
709 709  
710 710  
711 -When the configuration is complete, click** "Save&Apply"**.
655 +=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
712 712  
713 713  
714 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
658 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
715 715  
716 -[[image:image-20230602143122-4.png||height="511" width="983"]]
660 +If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
717 717  
662 +[[image:image-20230602140406-3.png||height="480" width="918"]]
718 718  
719 719  
720 -= 5. Watch Dog =
665 +When the configuration is complete, click** "Save&Apply"**.
721 721  
722 722  
723 -The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
668 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
724 724  
670 +[[image:image-20230602143122-4.png||height="511" width="983"]]
725 725  
726 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
727 727  
728 -The uses can be via the below method to enable Watch Dog:
673 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
729 729  
730 -(% class="box infomessage" %)
731 -(((
732 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
733 -)))
734 734  
735 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
736 736  
737 -
738 738  = 6. How users can access LPS8-V2 using serial USB =
739 739  
740 740  
... ... @@ -788,6 +788,7 @@
788 788  
789 789  1). Using the Linux command to upgrade the system
790 790  
730 +
791 791  (% class="box infomessage" %)
792 792  (((
793 793  **apt update && apt install *dragino***
... ... @@ -796,344 +796,65 @@
796 796  
797 797  2). Upgrade the system via the Web page button of "Manual Update"
798 798  
799 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
800 800  
740 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
741 +
801 801  [[image:image-20230607093849-1.png]]
802 802  
803 803  
804 -= (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)8 How do I view gateway logs(%%) =
805 805  
806 -=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)8.1 LoRaWAN Log:(%%) ===
746 += 8. FAQ =
807 807  
748 +== 8.1 How to change Hostname ==
808 808  
809 -==== Semtech UDP Log : ====
810 810  
811 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
751 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
812 812  
813 -[[image:image-20231017112115-2.png||height="611" width="821"]]
814 -
815 -
816 -==== Station Log: ====
817 -
818 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
819 -
820 -[[image:image-20231017111606-1.png||height="622" width="821"]]
821 -
822 -
823 -=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)8.2  4G Log(%%) ===
824 -
825 -
826 -User needs to access the Linux console of the gateway and enter the following command:
827 -
828 828  (% class="box infomessage" %)
829 829  (((
830 -cat /var/log/qmilog.txt
755 +hostnamectl set-hostname dragino-123456
831 831  )))
832 832  
833 -[[image:image-20231017114417-3.png||height="543" width="679"]]
758 +[[image:image-20230517102429-1.png]]
834 834  
760 +After the configuration is complete, run "reboot" to restart the gateway.
835 835  
836 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
837 837  
838 -Below are some commands as reference:
763 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
839 839  
840 ->Usage:  /usr/bin/quectel-CM [options]
841 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
842 -> -p pincode Verify sim card pin if sim card is locked
843 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
844 -> -f logfilename Save log message of this program to file
845 -> -u usbmonlog filename  Save usbmon log to file
846 -> -i interface Specify which network interface to setup data call when multi-modems exits
847 -> -4 Setup IPv4 data call (default)
848 -> -6 Setup IPv6 data call
849 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
850 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
851 -> -b Enable network interface bridge function (default 0)
852 -> -v Verbose log mode, for debug purpose.[Examples]
853 ->Example 1: /usr/bin/quectel-CM
854 ->Example 2: /usr/bin/quectel-CM -s 3gnet
855 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
856 856  
766 +Migrate guide:
857 857  
768 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
858 858  
859 -=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)8.3 Dmesg Log(%%) ===
770 +**2. On the Server ~-~-> Network Server interface, click "Management"**
860 860  
772 +[[image:image-20230616162454-1.png]]
861 861  
862 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
863 863  
864 -[[image:image-20231017115330-5.png||height="565" width="740"]]
775 +**3. Click "Migrate-Chirpstack"**
865 865  
777 +[[image:image-20230616162742-2.png]]
866 866  
867 -=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)8.4 Record Log(%%) ===
868 868  
780 +**4. Strat Install **
869 869  
870 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
782 +Click start Install and wait until the migration succeeds
871 871  
872 -[[image:image-20231017115124-4.png||height="215" width="880"]]
784 +[[image:image-20230616162934-3.png]]
873 873  
874 874  
875 -=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)8.5 View gateway logs via Linux Command(%%) ===
787 +**5.Migration complete check result**
876 876  
789 +[[image:image-20230616174526-4.png||height="706" width="983"]]
877 877  
878 -**Semtech UDP Log :**
879 879  
880 -(% class="box infomessage" %)
881 -(((
882 -**journalctl -u draginofwd -f**
883 -)))
792 +[[image:image-20230616180004-9.png]]
884 884  
885 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
886 886  
795 +== 8.3 How to reduce the 4g data consumed ==
887 887  
888 -**Station Log:**
889 889  
890 -(% class="box infomessage" %)
891 -(((
892 -**tail -f /var/log/station.log **
893 -)))
894 -
895 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
896 -
897 -
898 -**Dmesg Log:**
899 -
900 -(% class="box infomessage" %)
901 -(((
902 -**dmesg**
903 -)))
904 -
905 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
906 -
907 -
908 -
909 -(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
910 -= (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)9. More Services(%%) =
911 -
912 -== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)9.1 NTP Service/Time Synchronization(%%) ==
913 -
914 -The gateway time sync service is provided by chrony service
915 -
916 -
917 -=== 1). Modify the NTP server address: ===
918 -
919 -(% class="box infomessage" %)
920 -(((
921 -Configuration file path:  /etc/chrony/chrony.conf
922 -)))
923 -
924 -
925 -=== 2). Start/Stop/Enable/Disable NTP service: ===
926 -
927 -(% class="box infomessage" %)
928 -(((
929 -systemctl start chrony
930 -\\systemctl stop chrony
931 -\\systemctl disable chrony
932 -\\systemctl enable chrony
933 -)))
934 -
935 -
936 -(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
937 -= (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10. More features(%%) =
938 -
939 -(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
940 -== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)10.1 Chirpstack MQTT Forwarder(%%) ==
941 -
942 -
943 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
944 -
945 -
946 -(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
947 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
948 -
949 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
950 -
951 -(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
952 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
953 -
954 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
955 -* Configure the following settings:
956 -** **Service Provider:** //Custom / Private LoRaWAN//
957 -** **Server Address:** localhost
958 -** **Uplink Port:** 1700
959 -** **Downlink Port:** 1700
960 -* Click **Save & Apply**
961 -
962 -[[image:image-20240518145929-2.png||height="652" width="727"]]
963 -
964 -
965 -(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
966 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
967 -
968 -
969 -(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
970 -(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
971 -
972 -First you must login into the gateway using SSH:
973 -
974 -(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
975 -(((
976 -ssh root@GATEWAY-IP-ADDRESS
977 -)))
978 -
979 -(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
980 -The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
981 -
982 -
983 -(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
984 -(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
985 -
986 -(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
987 -Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
988 -
989 -(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
990 -(((
991 -cd /tmp
992 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
993 -)))
994 -
995 -
996 -(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
997 -(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
998 -
999 -Use the dpkg package-manager to install the downloaded package. Example:
1000 -
1001 -(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
1002 -(((
1003 -dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
1004 -)))
1005 -
1006 -[[image:image-20240518152148-4.png]]
1007 -
1008 -
1009 -(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
1010 -**Configuration**
1011 -
1012 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
1013 -
1014 -(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
1015 -This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1016 -
1017 -
1018 -**ChirpStack MQTT Forwarder Setting:**
1019 -
1020 -(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1021 -(((
1022 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
1023 -
1024 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1025 -)))
1026 -
1027 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1028 -
1029 -
1030 -Use commands to modify configuration files:
1031 -
1032 -(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1033 -(((
1034 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1035 -)))
1036 -
1037 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1038 -
1039 -
1040 -**(Re)start and stop commands**
1041 -
1042 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1043 -
1044 -(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1045 -(((
1046 -# start
1047 -
1048 -(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1049 -systemctl start chirpstack-mqtt-forwarder
1050 -
1051 -# stop
1052 -
1053 -systemctl stop chirpstack-mqtt-forwarder
1054 -
1055 -# restart
1056 -
1057 -systemctl restart chirpstack-mqtt-forwarder
1058 -)))
1059 -
1060 -(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1061 -(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1062 -
1063 -
1064 -**Check result**
1065 -
1066 -(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1067 -Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
1068 -
1069 -[[image:image-20240518154223-5.png]]
1070 -
1071 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1072 -
1073 -
1074 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.2 As a Data-only hotspot connect the helium blockchain(%%) ==
1075 -
1076 -
1077 -(% class="box infomessage" %)
1078 -(((
1079 -(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1080 -apt update && apt install helium-gateway
1081 -)))
1082 -
1083 -
1084 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.3 (%%)How does LPS8v2 filter unwanted lorawan packets ==
1085 -
1086 -
1087 -This feature is to filter the unwanted LoRaWAN packets. Purpose is to save the upstream traffic especially for a 4G cellular connection.
1088 -
1089 -Please refer to the link below for specific usage：**[[Filter unwanted LoRaWAN packets>>https://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]**
1090 -
1091 -
1092 -= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11. FAQ(%%) =
1093 -
1094 -== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)11.1 How to change Hostname(%%) ==
1095 -
1096 -
1097 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
1098 -
1099 -(% class="box infomessage" %)
1100 -(((
1101 -hostnamectl set-hostname dragino-123456
1102 -)))
1103 -
1104 -[[image:image-20230517102429-1.png]]
1105 -
1106 -After the configuration is complete, run "reboot" to restart the gateway.
1107 -
1108 -
1109 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
1110 -
1111 -
1112 -Migrate guide:
1113 -
1114 -To stabilize the completion of the migration, The users can migrate in one of the following ways
1115 -
1116 -**Method 1. Using the Linux shell, **
1117 -
1118 -**Method 2. Flash a new image with the Chirpstack**
1119 -
1120 -
1121 -=== Method 1: Using the Linux shell ===
1122 -
1123 -(% class="box infomessage" %)
1124 -(((
1125 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1126 -)))
1127 -
1128 -
1129 -=== Method 2: Flash a new image ===
1130 -
1131 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1132 -
1133 -
1134 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
1135 -
1136 -
1137 1137  1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
1138 1138  
1139 1139  [[image:image-20230719100239-1.png||height="724" width="994"]]
... ... @@ -1149,47 +1149,20 @@
1149 1149  [[image:image-20230719100419-3.png||height="458" width="995"]]
1150 1150  
1151 1151  
1152 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
813 +== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
1153 1153  
1154 1154  
1155 -By default, the LPS8v2's built-in server is ChirpStack v4,
1156 -
1157 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1158 -
1159 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
1160 -
1161 -
1162 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1163 -
1164 -
1165 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).5 (%%)How to check my USB port dev/tty after i plug in USB device. ==
1166 -
1167 -
1168 -When an external USB device is connected to LPS8v2, the user can access the Linux console of the LPS8v2 gateway and run the following command to check the USB port dev/tty:
1169 -
1170 1170  (% class="box infomessage" %)
1171 1171  (((
1172 -dmesg
818 +apt update && apt install helium-gateway
1173 1173  )))
1174 1174  
1175 -[[image:image-20240803095144-1.png]]
1176 1176  
822 += 9. Trouble Shooting =
1177 1177  
824 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1178 1178  
1179 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).6 DIN Mount Reference:(%%) ==
1180 1180  
1181 -
1182 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1183 -
1184 -[[image:image-20240318095617-2.png]]
1185 -
1186 -
1187 -
1188 -
1189 -= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12. Trouble Shooting(%%) =
1190 -
1191 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)12.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1192 -
1193 1193  [[image:image-20220920135918-1.png]]
1194 1194  
1195 1195  
... ... @@ -1205,7 +1205,7 @@
1205 1205  [[image:image-20220920141936-2.png]]
1206 1206  
1207 1207  
1208 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
842 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1209 1209  
1210 1210  
1211 1211  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -1213,13 +1213,13 @@
1213 1213  [[image:image-20230508171607-1.png]]
1214 1214  
1215 1215  
1216 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
850 +== 9.3  Fallback IP does not work, how can users check ==
1217 1217  
1218 1218  
1219 1219  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1220 1220  
1221 1221  
1222 -**~1. Check whether the configuration is correct**
856 +**1.Check whether the configuration is correct**
1223 1223  
1224 1224  Run the CMD command to ipconfig and ping 172.31.255.254.
1225 1225  
... ... @@ -1235,7 +1235,7 @@
1235 1235  If the firewall is not down, this will affect access to the gateway.
1236 1236  
1237 1237  
1238 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
872 +== 9.4  Click "Manual_Update", why there is no response? ==
1239 1239  
1240 1240  
1241 1241  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -1244,39 +1244,37 @@
1244 1244  [[image:image-20230527090555-3.png||height="660" width="832"]]
1245 1245  
1246 1246  
1247 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
881 +== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
1248 1248  
1249 1249  
1250 1250  Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1251 1251  
886 +
1252 1252  (% class="box infomessage" %)
1253 1253  (((
1254 -apt update && apt install *dragino*
889 +apt update && apt install dragino-fallback
1255 1255  
1256 1256  wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1257 1257  )))
1258 1258  
1259 1259  
1260 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
895 +== 9.6  How to clear data from the built-in server ==
1261 1261  
1262 1262  
1263 1263  **1) Build-in The Things Network**
1264 1264  
1265 -Refer to this link to delete the Built-in server's device.
900 +Due to the bugs of Build-in The Things Network, when the IP address of LPS8v2 changes, the built-in TTN configuration cannot be deleted
1266 1266  
1267 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
902 +Users can go back to the IP address configured for the first time or follow the steps below to clear the built-in TTN configuration:
1268 1268  
1269 1269  
905 +
1270 1270  **2) Build-in Chirpstack**
1271 1271  
1272 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1273 1273  
1274 -[[image:image-20231106180846-5.png||height="310" width="668"]]
909 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1275 1275  
1276 1276  
1277 -= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)13. Supports(%%) =
1278 -
1279 -
1280 1280  (((
1281 1281  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1282 1282  )))
... ... @@ -1285,7 +1285,7 @@
1285 1285  With your question as detailed as possible. We will reply and help you in the shortest.
1286 1286  
1287 1287  
1288 -= (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)14. Reference(%%) =
920 += 11. Reference =
1289 1289  
1290 1290  
1291 1291  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -1294,7 +1294,7 @@
1294 1294  
1295 1295  )))
1296 1296  
1297 -= (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)15. Order Info(%%) =
929 += 12. Order Info =
1298 1298  
1299 1299  
1300 1300  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1326,7 +1326,7 @@
1326 1326  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1327 1327  
1328 1328  
1329 -= (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)16. Manufacturer Info(%%) =
961 += 13. Manufacturer Info =
1330 1330  
1331 1331  
1332 1332  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1336,7 +1336,7 @@
1336 1336  LongCheng Street, LongGang District ; Shenzhen 518116,China
1337 1337  
1338 1338  
1339 -= (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)17. FCC Warning(%%) =
971 += 14. FCC Warning =
1340 1340  
1341 1341  
1342 1342  (((
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -71.7 KB
Content
image-20240803095144-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.0 KB
Content
image-20240831151427-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
image-20240831152113-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
image-20240902092034-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -69.4 KB
Content
image-20241231151434-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20241231151512-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20241231151635-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20241231151810-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.3 KB
Content
image-20241231151939-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -502.1 KB
Content
image-20241231152015-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -502.0 KB
Content
image-20241231153425-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -1.4 MB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0