Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 340.1 >
edited by Kilight Cao
on 2024/12/31 15:20
To version < 224.1 >
edited by Kilight Cao
on 2023/06/16 18:00
>
Change comment: Uploaded new attachment "image-20230616180004-9.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
21 +== 1.1 What is LPS8v2 ==
22 22  
23 23  
24 24  (((
... ... @@ -66,6 +66,8 @@
66 66  * Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 +
70 +
69 69  == 1.3 Features ==
70 70  
71 71  
... ... @@ -81,9 +81,11 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
89 +
90 +
87 87  == 1.4 LED Indicators ==
88 88  
89 89  
... ... @@ -96,16 +96,16 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
107 + ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
107 107  
108 -== 1.5 Button Instruction ==
112 +== 1.5 Button Intruction ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -121,18 +121,6 @@
121 121   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 136  = 2. Quick Start =
137 137  
138 138  
... ... @@ -141,9 +141,9 @@
141 141  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
142 142  
143 143  
144 -== 2.1 Access and Configure LPS8-V2 ==
136 +== 2.1 Connects to the network and accesses the gateway Web UI ==
145 145  
146 -=== 2.1.1 Find IP address of LPS8-V2 ===
138 +=== 2.1.1 connect the network ===
147 147  
148 148  
149 149  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -160,6 +160,7 @@
160 160  [[image:image-20230527085250-2.png||height="495" width="284"]]
161 161  
162 162  
155 +
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,6 +174,7 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
170 +
177 177  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
179 179  
... ... @@ -197,7 +197,7 @@
197 197  
198 198  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
194 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 201  
202 202  
203 203  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -205,6 +205,7 @@
205 205  [[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
207 207  
202 +
208 208  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -213,18 +213,19 @@
213 213  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
214 214  
215 215  
216 -[[image:image-20241231151635-3.png||height="481" width="944"]]
211 +[[image:image-20220622102702-6.png]]
217 217  
218 218  
219 219  
220 220  **Wi-Fi configuration successful**
221 221  
222 -[[image:image-20241231151810-4.png||height="487" width="947"]]
223 223  
218 +[[image:image-20220622102847-7.png]]
224 224  
225 -[[image:image-20241231152015-6.png||height="506" width="1001"]]
226 226  
221 +[[image:image-20220622102901-8.png||height="476" width="938"]]
227 227  
223 +
228 228  === 2.1.2 Access Configure Web UI ===
229 229  
230 230  
... ... @@ -243,7 +243,7 @@
243 243  
244 244  (% style="color:blue" %)**Password:   dragino**
245 245  
246 -[[image:image-20240318160845-1.png]]
242 +[[image:image-20230106153501-1.png||height="367" width="894"]]
247 247  
248 248  
249 249  == 2.2  Typical Network Setup ==
... ... @@ -259,6 +259,8 @@
259 259  
260 260  * **Cellular Mode**
261 261  
258 +
259 +
262 262  === 2.2.2  Use WAN port to access Internet ===
263 263  
264 264  
... ... @@ -275,7 +275,7 @@
275 275  
276 276  The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
277 277  
278 -[[image:image-20241231151512-2.png]]
276 +[[image:image-20230411095739-1.png||height="264" width="691"]]
279 279  
280 280  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
281 281  
... ... @@ -306,9 +306,6 @@
306 306  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
307 307  
308 308  
309 -**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
310 -
311 -
312 312  === 2.2.5  Check Internet connection ===
313 313  
314 314  
... ... @@ -402,7 +402,7 @@
402 402  
403 403  
404 404  (% class="wikigeneratedid" %)
405 -[[image:image-20220616110739-1.png||height="457" width="836"]]
400 +[[image:image-20220616110739-1.png||height="372" width="682"]]
406 406  
407 407  
408 408  (((
... ... @@ -432,40 +432,24 @@
432 432  
433 433  (((
434 434  Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
435 -
436 -
437 -== (% style="color:inherit; font-family:inherit; font-size:26px" %)3.4  Forwarder(%%) ==
438 438  )))
439 439  
440 -=== 3.4.1 Forwarder ~-~-> MQTT Forwarder ===
441 441  
433 +== 3.4 Network Settings ==
442 442  
443 -In the latest version, MQTT Forwarder functionality has been added to the LPS8V2 gateway by default
435 +=== 3.4.1 Network ~-~-> WiFi ===
444 444  
445 -Users can configure the MQTT Forwarder on the **Forwarder~-~->MQTT** interface, and when the configuration is successful, it will forward the sensor data of the lorawan server chirpstack built in LPS8v2
446 446  
447 -For a detailed example of this feature, see this link:**[[MQTT Forward Instruction - DRAGINO>>http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/#H3.3A0UseLoRaWANProtocolforcommunication--ForLPS8V2]]**
438 +[[image:image-20220616114756-4.png||height="251" width="669"]]
448 448  
449 -(% class="wikigeneratedid" %)
450 -[[image:image-20240902092034-1.png]]
451 451  
441 +=== 3.4.2 Network ~-~-> System Status ===
452 452  
453 -== 3.5 Network Settings ==
454 454  
455 -=== 3.5.1 Network ~-~-> WiFi ===
456 -
457 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
458 -
459 -[[image:image-20241231151434-1.png||height="608" width="1195"]]
460 -
461 -
462 -=== 3.5.2 Network ~-~-> System Status ===
463 -
464 -
465 465  [[image:image-20220820134112-2.png||height="539" width="668"]]
466 466  
467 467  
468 -=== 3.5.3 Network ~-~-> Network ===
447 +=== 3.4.3 Network ~-~-> Network ===
469 469  
470 470  
471 471  In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
... ... @@ -473,7 +473,7 @@
473 473  [[image:image-20230214093657-2.png||height="333" width="858"]]
474 474  
475 475  
476 -=== 3.5.4 Network ~-~-> Cellular ===
455 +=== 3.4.4 Network ~-~-> Cellular ===
477 477  
478 478  
479 479  In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
... ... @@ -483,30 +483,22 @@
483 483  [[image:image-20230228115126-1.png]]
484 484  
485 485  
486 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
465 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
487 487  
488 488  [[image:image-20230228115535-2.png||height="478" width="888"]]
489 489  
490 490  
491 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
470 +== 3.5 System ==
492 492  
493 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
472 +=== 3.5.1 System ~-~-> System Overview ===
494 494  
495 -(% class="wikigeneratedid" id="H5.MQTTForwarder" %)
496 -(% id="cke_bm_4823S" style="display:none" %)
497 497  
498 -
499 -== 3.6 System ==
500 -
501 -=== 3.6.1 System ~-~-> System Overview ===
502 -
503 -
504 504  Shows the system info:
505 505  
506 -[[image:image-20231031162854-1.png]]
477 +[[image:image-20220917144512-5.png||height="618" width="853"]]
507 507  
508 508  
509 -=== 3.6.2 System ~-~-> System General ===
480 +=== 3.5.2 System ~-~-> System General ===
510 510  
511 511  
512 512  In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
... ... @@ -516,29 +516,15 @@
516 516  [[image:image-20230214094058-3.png]]
517 517  
518 518  
519 -=== 3.6.3 System ~-~-> Backup/Restore ===
490 +=== 3.5.3 System ~-~-> Backup/Restore ===
520 520  
521 521  
522 -[[image:image-20231031162927-2.png]]
493 +[[image:image-20220917144725-6.png||height="208" width="869"]]
523 523  
524 -=== 3.6.4 System ~-~-> Reboot / Reset ===
525 525  
526 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
496 +=== 3.5.4 System ~-~-> Remoteit ===
527 527  
528 -ETH LED will SOLID BULE Until the restore is finished.
529 529  
530 -When the gateway restores the factory settings is complete,
531 -
532 -The WiFi configuration will enable WiFi Access Point by default.
533 -
534 -The other configuration will be restored to the default configuration.
535 -
536 -[[image:image-20240203172853-1.png||height="365" width="901"]]
537 -
538 -
539 -=== 3.6.5 System ~-~-> Remoteit ===
540 -
541 -
542 542  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
543 543  
544 544  
... ... @@ -547,7 +547,7 @@
547 547  [[image:image-20221230092303-2.png]]
548 548  
549 549  
550 -=== 3.6.6 System ~-~-> Package Management ===
507 +=== 3.5.5 System ~-~-> Package Management ===
551 551  
552 552  
553 553  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -555,114 +555,98 @@
555 555  [[image:image-20230214094316-4.png]]
556 556  
557 557  
558 -== 3.7 Logread ==
515 += 4. Build-in Server =
559 559  
560 -=== 3.7.1 LoRa Log ===
561 561  
518 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
562 562  
563 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
564 564  
565 -[[image:image-20240416112509-1.png]]
521 +[[image:image-20230214095318-5.png||height="347" width="980"]]
566 566  
567 567  
568 -=== 3.7.2 Gateway Traffic ===
524 +(% style="color:red" %)**Note:**
569 569  
570 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
526 + **Path**: System ~-~-> Built-in Server
571 571  
572 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
573 573  
529 +**Troubleshooting:**
574 574  
575 -=== 3.7.3 System Log ===
576 576  
577 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
532 +**~ 1. URL does not jump properly**
578 578  
579 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
534 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
580 580  
536 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
581 581  
582 -=== 3.7.4 Record Log ===
583 583  
584 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
539 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
585 585  
586 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
587 587  
542 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
588 588  
544 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
589 589  
590 -= 4. Build-in Server =
591 591  
592 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
547 +Login account:
593 593  
549 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
594 594  
595 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
551 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
596 596  
597 -[[image:image-20231106180816-4.png||height="416" width="896"]]
598 598  
599 -[[image:image-20231201165904-1.png||height="466" width="899"]]
554 +[[image:image-20220725171719-1.png||height="570" width="769"]]
600 600  
601 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
602 602  
603 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
557 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
604 604  
605 605  
560 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
606 606  
607 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
562 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
608 608  
564 +[[image:image-20230321092456-1.png]]
609 609  
610 -[[image:image-20230616175558-7.png||height="362" width="894"]]
611 611  
612 -[[image:image-20231201170355-2.png||height="536" width="899"]]
567 +== 4.2 Application Server ~-~- Node-Red ==
613 613  
614 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
615 615  
570 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
616 616  
617 617  
618 -== **3). Troubleshooting:** ==
573 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
619 619  
620 620  
621 -* (((
622 -=== ** If the URL does not jump properly.** ===
623 -)))
576 +[[image:image-20220725172124-3.png||height="610" width="843"]]
624 624  
625 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
626 626  
627 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
628 628  
580 +=== **Using Node-Red, InfluxDB and Grafana** ===
629 629  
630 -* (((
631 -=== ** How to install InfluxDB, Garfana.** ===
632 -)))
582 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
633 633  
634 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
635 635  
585 +the users can refer to this link to install them.
636 636  
637 -* (((
638 -=== ** How to upgrade the gateway node.js to the latest version.** ===
639 -)))
587 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
640 640  
641 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
642 642  
590 +=== **Upgrade the node.js** ===
643 643  
644 -* (((
645 -=== ** How to batch register device on the built-in Chirpstack network server** ===
646 -)))
592 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
647 647  
648 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
649 649  
595 +the users can refer to this link to upgrade them.
650 650  
651 -* (((
652 -=== ** Why my gateway is not Chirpstack?** ===
653 -)))
597 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
654 654  
655 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
656 656  
600 +== 4.3 How to disable the built-in server ==
657 657  
658 -* (((
659 -=== ** How to disable the built-in server** ===
660 -)))
661 661  
603 +Use the following commands to start and stop the TTNv3 service:
604 +
662 662  (% class="box infomessage" %)
663 663  (((
664 -Use the following commands to start and stop the TTNv3 service:**     **
665 -
666 666  **# start**
667 667  systemctl start ttnstack
668 668  
... ... @@ -676,10 +676,10 @@
676 676  systemctl disable ttnstack
677 677  )))
678 678  
679 -(% class="box infomessage" %)
680 -(((
681 681  Use the following commands to start and stop the Node-Red service:
682 682  
622 +(% class="box infomessage" %)
623 +(((
683 683  **# start**
684 684  systemctl start nodered
685 685  
... ... @@ -694,49 +694,42 @@
694 694  )))
695 695  
696 696  
697 -* (((
698 -=== ** How to choose the Chirpstack server frequency SubBand** ===
699 -)))
638 +== 4.4 How to use ChirpStack on LPS8-V2 ==
700 700  
701 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
702 702  
703 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
641 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
704 704  
705 -[[image:image-20230602140406-3.png||height="480" width="918"]]
643 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
706 706  
707 707  
708 -When the configuration is complete, click** "Save&Apply"**.
646 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
709 709  
710 710  
711 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
649 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
712 712  
713 -[[image:image-20230602143122-4.png||height="511" width="983"]]
651 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
714 714  
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
715 715  
716 716  
717 -= 5. Watch Dog =
656 +When the configuration is complete, click** "Save&Apply"**.
718 718  
719 719  
720 -The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
659 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
721 721  
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
722 722  
723 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
724 724  
725 -The uses can be via the below method to enable Watch Dog:
664 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
726 726  
727 -(% class="box infomessage" %)
728 -(((
729 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
730 -)))
731 731  
732 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
733 733  
734 -
735 735  = 6. How users can access LPS8-V2 using serial USB =
736 736  
737 737  
738 738  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
739 739  
673 +
740 740  Port 1 of the UART on the LPS8-V2 is GND
741 741  
742 742  (% class="box infomessage" %)
... ... @@ -748,8 +748,10 @@
748 748  **GND <~-~--> GND (Black line)**
749 749  )))
750 750  
685 +
751 751  **LPS8v2 UART connection photo**
752 752  
688 +
753 753  [[image:image-20230421094319-2.png||height="351" width="392"]]
754 754  
755 755  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -761,334 +761,151 @@
761 761  [[image:image-20220804164747-2.png||height="622" width="594"]]
762 762  
763 763  
764 -= 7. OTA System Update =
700 += 7. Use the helium gateway-rs as the Data-only Hotspot =
765 765  
766 766  
767 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
703 +== **Step 1: Configure Frequency Band** ==
768 768  
769 769  
770 -== 7.1 Auto-update method ==
706 +//Each country has a requirement for frequency region. Choose the right one for your area.//
771 771  
708 +[[image:image-20220905164308-1.png]]
772 772  
773 -The default, each gateway will enable the auto-update function.
774 774  
775 -this function will be triggered every boot and every midnight.
776 776  
712 +== **Step 2: Configure the forward address** ==
777 777  
778 -Users can enable/disable it via Web Page
779 779  
780 -[[image:image-20230607094447-2.png]]
715 +**Select one of the servers to configure.**
781 781  
717 +**For example:**
782 782  
783 -== 7.2 Manual upgrade method ==
719 +[[image:image-20220905164847-2.png]]
784 784  
785 785  
786 -1). Using the Linux command to upgrade the system
787 787  
788 -(% class="box infomessage" %)
789 -(((
790 -**apt update && apt install *dragino***
791 -)))
723 +== **Step 3: Download and Install the Helium-gateway-rs** ==
792 792  
793 793  
794 -2). Upgrade the system via the Web page button of "Manual Update"
726 +**Access the gateway CLI via SSH.**
795 795  
796 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
728 +[[image:image-20230425153417-2.png]]
797 797  
798 -[[image:image-20230607093849-1.png]]
799 799  
731 +**Install the new gateway-rs**
800 800  
801 -= (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)8 How do I view gateway logs(%%) =
802 -
803 -=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)8.1 LoRaWAN Log:(%%) ===
804 -
805 -
806 -==== Semtech UDP Log : ====
807 -
808 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
809 -
810 -[[image:image-20231017112115-2.png||height="611" width="821"]]
811 -
812 -
813 -==== Station Log: ====
814 -
815 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
816 -
817 -[[image:image-20231017111606-1.png||height="622" width="821"]]
818 -
819 -
820 -=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)8.2  4G Log(%%) ===
821 -
822 -
823 -User needs to access the Linux console of the gateway and enter the following command:
824 -
825 825  (% class="box infomessage" %)
826 826  (((
827 -cat /var/log/qmilog.txt
735 +**apt update && apt install helium-gateway**
828 828  )))
829 829  
830 -[[image:image-20231017114417-3.png||height="543" width="679"]]
738 +[[image:image-20230425154058-4.png]]
831 831  
832 832  
833 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
834 834  
835 -Below are some commands as reference:
742 +Option: If you installed the older gateway-rs, you have clean it
836 836  
837 ->Usage:  /usr/bin/quectel-CM [options]
838 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
839 -> -p pincode Verify sim card pin if sim card is locked
840 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
841 -> -f logfilename Save log message of this program to file
842 -> -u usbmonlog filename  Save usbmon log to file
843 -> -i interface Specify which network interface to setup data call when multi-modems exits
844 -> -4 Setup IPv4 data call (default)
845 -> -6 Setup IPv6 data call
846 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
847 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
848 -> -b Enable network interface bridge function (default 0)
849 -> -v Verbose log mode, for debug purpose.[Examples]
850 ->Example 1: /usr/bin/quectel-CM
851 ->Example 2: /usr/bin/quectel-CM -s 3gnet
852 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
853 -
854 -
855 -
856 -=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)8.3 Dmesg Log(%%) ===
857 -
858 -
859 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
860 -
861 -[[image:image-20231017115330-5.png||height="565" width="740"]]
862 -
863 -
864 -=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)8.4 Record Log(%%) ===
865 -
866 -
867 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
868 -
869 -[[image:image-20231017115124-4.png||height="215" width="880"]]
870 -
871 -
872 -=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)8.5 View gateway logs via Linux Command(%%) ===
873 -
874 -
875 -**Semtech UDP Log :**
876 -
877 877  (% class="box infomessage" %)
878 878  (((
879 -**journalctl -u draginofwd -f**
746 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
880 880  )))
881 881  
882 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
749 +[[image:image-20230425153823-3.png]]
883 883  
884 884  
885 -**Station Log:**
752 +**Change the region setting:**
886 886  
887 -(% class="box infomessage" %)
888 -(((
889 -**tail -f /var/log/station.log **
890 -)))
891 891  
892 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
893 -
894 -
895 -**Dmesg Log:**
896 -
897 897  (% class="box infomessage" %)
898 898  (((
899 -**dmesg**
900 -)))
757 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
901 901  
902 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
903 903  
760 +**e.g: **
904 904  
762 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
905 905  
906 -(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
907 -= (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)9. More Services(%%) =
908 -
909 -== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)9.1 NTP Service/Time Synchronization(%%) ==
910 -
911 -The gateway time sync service is provided by chrony service
912 -
913 -
914 -=== 1). Modify the NTP server address: ===
915 -
916 -(% class="box infomessage" %)
917 -(((
918 -Configuration file path:  /etc/chrony/chrony.conf
764 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
919 919  )))
920 920  
921 921  
922 -=== 2). Start/Stop/Enable/Disable NTP service: ===
768 +**Restart the gateway-rs**
923 923  
924 924  (% class="box infomessage" %)
925 925  (((
926 -systemctl start chrony
927 -\\systemctl stop chrony
928 -\\systemctl disable chrony
929 -\\systemctl enable chrony
772 +**systemctl restart helium_gateway**
930 930  )))
931 931  
775 +[[image:image-20230425155612-7.png||height="265" width="911"]]
932 932  
933 -(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
934 -= (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10. More features(%%) =
935 935  
936 -(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
937 -== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)10.1 Chirpstack MQTT Forwarder(%%) ==
938 938  
779 +**Check the helium_gateway running status**
939 939  
940 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
941 941  
942 -
943 -(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
944 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
945 -
946 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
947 -
948 -(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
949 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
950 -
951 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
952 -* Configure the following settings:
953 -** **Service Provider:** //Custom / Private LoRaWAN//
954 -** **Server Address:** localhost
955 -** **Uplink Port:** 1700
956 -** **Downlink Port:** 1700
957 -* Click **Save & Apply**
958 -
959 -[[image:image-20240518145929-2.png||height="652" width="727"]]
960 -
961 -
962 -(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
963 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
964 -
965 -
966 -(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
967 -(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
968 -
969 -First you must login into the gateway using SSH:
970 -
971 -(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
782 +(% class="box infomessage" %)
972 972  (((
973 -ssh root@GATEWAY-IP-ADDRESS
784 +**systemctl status helium_gateway**
974 974  )))
975 975  
976 -(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
977 -The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
978 978  
788 +[[image:image-20230425154740-5.png]]
979 979  
980 -(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
981 -(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
982 982  
983 -(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
984 -Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
985 985  
986 -(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
987 -(((
988 -cd /tmp
989 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
990 -)))
792 +**Check the helium_gateway Log：**
991 991  
992 -
993 -(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
994 -(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
995 -
996 -Use the dpkg package-manager to install the downloaded package. Example:
997 -
998 -(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
794 +(% class="box infomessage" %)
999 999  (((
1000 -dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
796 +**journalctl -u helium_gateway -f**
1001 1001  )))
1002 1002  
1003 -[[image:image-20240518152148-4.png]]
1004 1004  
800 +[[image:image-20230425155659-8.png]]
1005 1005  
1006 -(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
1007 -**Configuration**
1008 1008  
1009 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
803 += 8. OTA System Update =
1010 1010  
1011 -(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
1012 -This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1013 1013  
806 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1014 1014  
1015 -**ChirpStack MQTT Forwarder Setting:**
1016 1016  
1017 -(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1018 -(((
1019 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
809 +== 8.1 Auto-update method ==
1020 1020  
1021 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1022 -)))
1023 1023  
1024 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
812 +The default, each gateway will enable the auto-update function.
1025 1025  
814 +this function will be triggered every boot and every midnight.
1026 1026  
1027 -Use commands to modify configuration files:
1028 1028  
1029 -(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1030 -(((
1031 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1032 -)))
817 +Users can enable/disable it via Web Page
1033 1033  
1034 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
819 +[[image:image-20230607094447-2.png]]
1035 1035  
1036 1036  
1037 -**(Re)start and stop commands**
822 +== 8.2 Manual upgrade method ==
1038 1038  
1039 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1040 1040  
1041 -(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1042 -(((
1043 -# start
825 +1). Using the Linux command to upgrade the system
1044 1044  
1045 -(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1046 -systemctl start chirpstack-mqtt-forwarder
1047 1047  
1048 -# stop
1049 -
1050 -systemctl stop chirpstack-mqtt-forwarder
1051 -
1052 -# restart
1053 -
1054 -systemctl restart chirpstack-mqtt-forwarder
1055 -)))
1056 -
1057 -(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1058 -(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1059 -
1060 -
1061 -**Check result**
1062 -
1063 -(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1064 -Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
1065 -
1066 -[[image:image-20240518154223-5.png]]
1067 -
1068 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1069 -
1070 -
1071 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.2 As a Data-only hotspot connect the helium blockchain(%%) ==
1072 -
1073 -
1074 1074  (% class="box infomessage" %)
1075 1075  (((
1076 -(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1077 -apt update && apt install helium-gateway
830 +**apt update && apt install *dragino***
1078 1078  )))
1079 1079  
1080 1080  
1081 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.3 (%%)How does LPS8v2 filter unwanted lorawan packets ==
834 +2). Upgrade the system via the Web page button of "Manual Update"
1082 1082  
1083 1083  
1084 -This feature is to filter the unwanted LoRaWAN packets. Purpose is to save the upstream traffic especially for a 4G cellular connection.
837 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
1085 1085  
1086 -Please refer to the link below for specific usage：**[[Filter unwanted LoRaWAN packets>>https://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]**
839 +[[image:image-20230607093849-1.png]]
1087 1087  
1088 1088  
1089 -= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11. FAQ(%%) =
842 += 9. FAQ =
1090 1090  
1091 -== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)11.1 How to change Hostname(%%) ==
844 +== 9.1 How to change Hostname ==
1092 1092  
1093 1093  
1094 1094  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
... ... @@ -1103,90 +1103,35 @@
1103 1103  After the configuration is complete, run "reboot" to restart the gateway.
1104 1104  
1105 1105  
1106 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
859 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
1107 1107  
1108 1108  
1109 1109  Migrate guide:
1110 1110  
1111 -To stabilize the completion of the migration, The users can migrate in one of the following ways
864 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
1112 1112  
1113 -**Method 1. Using the Linux shell, **
866 +2. Download migrate script and run it.
1114 1114  
1115 -**Method 2. Flash a new image with the Chirpstack**
1116 -
1117 -
1118 -=== Method 1: Using the Linux shell ===
1119 -
1120 1120  (% class="box infomessage" %)
1121 1121  (((
1122 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
870 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1123 1123  )))
1124 1124  
873 +[[image:image-20230602135658-1.png||height="545" width="986"]]
1125 1125  
1126 -=== Method 2: Flash a new image ===
1127 1127  
1128 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
876 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
1129 1129  
878 +[[image:image-20230602135825-2.png||height="356" width="855"]]
1130 1130  
1131 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
880 +The default account for chirpstack is: **admin/admin**
1132 1132  
1133 1133  
1134 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
883 += 10. Trouble Shooting =
1135 1135  
1136 -[[image:image-20230719100239-1.png||height="724" width="994"]]
885 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1137 1137  
1138 1138  
1139 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
1140 -
1141 -[[image:image-20230719100332-2.png]]
1142 -
1143 -
1144 -3. Disable the auto-update:
1145 -
1146 -[[image:image-20230719100419-3.png||height="458" width="995"]]
1147 -
1148 -
1149 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
1150 -
1151 -
1152 -By default, the LPS8v2's built-in server is ChirpStack v4,
1153 -
1154 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1155 -
1156 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
1157 -
1158 -
1159 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1160 -
1161 -
1162 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).5 (%%)How to check my USB port dev/tty after i plug in USB device. ==
1163 -
1164 -
1165 -When an external USB device is connected to LPS8v2, the user can access the Linux console of the LPS8v2 gateway and run the following command to check the USB port dev/tty:
1166 -
1167 -(% class="box infomessage" %)
1168 -(((
1169 -dmesg
1170 -)))
1171 -
1172 -[[image:image-20240803095144-1.png]]
1173 -
1174 -
1175 -
1176 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).6 DIN Mount Reference:(%%) ==
1177 -
1178 -
1179 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1180 -
1181 -[[image:image-20240318095617-2.png]]
1182 -
1183 -
1184 -
1185 -
1186 -= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12. Trouble Shooting(%%) =
1187 -
1188 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)12.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1189 -
1190 1190  [[image:image-20220920135918-1.png]]
1191 1191  
1192 1192  
... ... @@ -1202,7 +1202,7 @@
1202 1202  [[image:image-20220920141936-2.png]]
1203 1203  
1204 1204  
1205 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
903 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1206 1206  
1207 1207  
1208 1208  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -1210,13 +1210,13 @@
1210 1210  [[image:image-20230508171607-1.png]]
1211 1211  
1212 1212  
1213 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
911 +== 10.3  Fallback IP does not work, how can users check ==
1214 1214  
1215 1215  
1216 1216  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1217 1217  
1218 1218  
1219 -**~1. Check whether the configuration is correct**
917 +**1.Check whether the configuration is correct**
1220 1220  
1221 1221  Run the CMD command to ipconfig and ping 172.31.255.254.
1222 1222  
... ... @@ -1232,7 +1232,7 @@
1232 1232  If the firewall is not down, this will affect access to the gateway.
1233 1233  
1234 1234  
1235 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
933 +== 10.4  Click "Manual_Update", why there is no response? ==
1236 1236  
1237 1237  
1238 1238  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -1241,40 +1241,10 @@
1241 1241  [[image:image-20230527090555-3.png||height="660" width="832"]]
1242 1242  
1243 1243  
1244 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
942 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
1245 1245  
1246 1246  
1247 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1248 -
1249 -(% class="box infomessage" %)
1250 1250  (((
1251 -apt update && apt install *dragino*
1252 -
1253 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1254 -)))
1255 -
1256 -
1257 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1258 -
1259 -
1260 -**1) Build-in The Things Network**
1261 -
1262 -Refer to this link to delete the Built-in server's device.
1263 -
1264 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1265 -
1266 -
1267 -**2) Build-in Chirpstack**
1268 -
1269 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1270 -
1271 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1272 -
1273 -
1274 -= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)13. Supports(%%) =
1275 -
1276 -
1277 -(((
1278 1278  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1279 1279  )))
1280 1280  
... ... @@ -1282,16 +1282,17 @@
1282 1282  With your question as detailed as possible. We will reply and help you in the shortest.
1283 1283  
1284 1284  
1285 -= (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)14. Reference(%%) =
953 += 12. Reference =
1286 1286  
1287 1287  
1288 1288  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
1289 1289  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
1290 1290  
959 +
1291 1291  
1292 1292  )))
1293 1293  
1294 -= (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)15. Order Info(%%) =
963 += 13. Order Info =
1295 1295  
1296 1296  
1297 1297  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1323,7 +1323,7 @@
1323 1323  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1324 1324  
1325 1325  
1326 -= (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)16. Manufacturer Info(%%) =
995 += 14. Manufacturer Info =
1327 1327  
1328 1328  
1329 1329  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1333,7 +1333,7 @@
1333 1333  LongCheng Street, LongGang District ; Shenzhen 518116,China
1334 1334  
1335 1335  
1336 -= (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)17. FCC Warning(%%) =
1005 += 15. FCC Warning =
1337 1337  
1338 1338  
1339 1339  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -71.7 KB
Content
image-20240803095144-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.0 KB
Content
image-20240831151427-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
image-20240831152113-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
image-20240902092034-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -69.4 KB
Content
image-20241231151434-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20241231151512-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20241231151635-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20241231151810-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.3 KB
Content
image-20241231151939-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -502.1 KB
Content
image-20241231152015-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -502.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0