Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 2 added, 0 removed)
  • image-20220622102901-8.png
  • image-20220622103332-9.png

Details

Page properties

Content

...	...	@@ -68,6 +68,29 @@
68	68	== **1.4 Block Diagram** ==
69	69
70	70
	71	+== **1.5 LED Indicators** ==
	72	+
	73	+LPS8-V2 has totally four LEDs, They are:
	74	+
	75	+
	76	+//**➢ Power LED**: This RED LED will be solid if the device is properly powered//
	77	+
	78	+
	79	+//**➢ LoRa LED**: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
	80	+
	81	+
	82	+//**➢ SYS LED**: This RGB LED will show different colors in different states~://
	83	+
	84	+// ✓ SOLID BLUE: The device is alive with a LoRaWAN server connection.//
	85	+
	86	+// ✓ BLINKING BLUE: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
	87	+
	88	+// ✓ SOLID RED: Device doesn’t have an Internet connection.//
	89	+
	90	+
	91	+//**➢ ETH LED**: This LED shows the ETH interface connection status.//
	92	+
	93	+
71	71	= **2. Quick Start** =
72	72
73	73	The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
...	...	@@ -75,15 +75,64 @@
75	75	In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
76	76
77	77
78		-== **2.1 The LPS8-V2 connects to the network** ==
	101	+== **2.1 Connects to the network and accesses the gateway Web UI** ==
79	79
80	80
81		-=== 2.1.1 **Method 1**: Connect the network via Ethernet, ===
	104	+== **2.1.1 connect the network.** ==
82	82
	106	+(% class="wikigeneratedid" %)
	107	+=== ===
83	83
84		-=== 2.1.2 **Method 2**: Connect the network via Wi-Fi. ===
	109	+(% class="wikigeneratedid" %)
	110	+=== **Method 1**: Connect via Ethernet with DHCP IP from the router ===
85	85
	112	+Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
86	86
	114	+You can also use this IP to connect.
	115	+
	116	+[[image:image-20220622100129-1.png||height="332" width="1263"]]
	117	+
	118	+
	119	+=== **Method 2**: Connect via WiFi with DHCP IP from the router ===
	120	+
	121	+
	122	+[[image:image-20220622100542-2.png||height="369" width="1256"]]
	123	+
	124	+
	125	+The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
	126	+
	127	+
	128	+**Steps to connect via fallback IP:**
	129	+
	130	+~1. Connect PC’s Ethernet port to LPS8-V2's WAN port
	131	+
	132	+2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
	133	+
	134	+[[image:image-20220622101433-4.png]]
	135	+
	136	+
	137	+and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
	138	+
	139	+
	140	+[[image:image-20220622102210-5.png||height="569" width="1039"]]
	141	+
	142	+
	143	+Fill in the WiFi information by checking the box and clicking **Save&Apply**
	144	+
	145	+
	146	+[[image:image-20220622102702-6.png]]
	147	+
	148	+
	149	+**Wi-Fi configuration successful**
	150	+
	151	+
	152	+[[image:image-20220622102847-7.png]]
	153	+
	154	+[[image:image-20220622102901-8.png||height="513" width="1011"]]
	155	+
	156	+
	157	+
	158	+
87	87	== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
88	88
89	89

image-20220622102901-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+390.9 KB

Content

image-20220622103332-9.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+63.1 KB

Content