Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 329.1 >
edited by Kilight Cao
on 2024/09/02 09:20
To version < 206.1 >
edited by Kilight Cao
on 2023/06/02 13:56
>
Change comment: Uploaded new attachment "image-20230602135658-1.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
21 +== 1.1 What is LPS8v2 ==
22 22  
23 23  
24 24  (((
... ... @@ -66,6 +66,8 @@
66 66  * Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 +
70 +
69 69  == 1.3 Features ==
70 70  
71 71  
... ... @@ -81,12 +81,18 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
88 88  
89 89  
91 +== 1.4 Block Diagram ==
92 +
93 +
94 +
95 +== 1.5 LED Indicators ==
96 +
97 +
90 90  LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
... ... @@ -96,16 +96,16 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
107 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
109 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
111 + ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
107 107  
108 -== 1.5 Button Intruction ==
116 +== 1.6 Button Intruction ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -113,26 +113,14 @@
113 113  
114 114  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
124 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
127 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
129 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 136  = 2. Quick Start =
137 137  
138 138  
... ... @@ -141,9 +141,9 @@
141 141  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
142 142  
143 143  
144 -== 2.1 Access and Configure LPS8-V2 ==
140 +== 2.1 Connects to the network and accesses the gateway Web UI ==
145 145  
146 -=== 2.1.1 Find IP address of LPS8-V2 ===
142 +=== 2.1.1 connect the network ===
147 147  
148 148  
149 149  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -151,7 +151,7 @@
151 151  
152 152  Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
153 153  
154 -(% style="background-color:yellow" %)**dragino+dragino**
150 + (% style="background-color:yellow" %)**dragino+dragino**
155 155  
156 156  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
157 157  
... ... @@ -160,6 +160,9 @@
160 160  [[image:image-20230527085250-2.png||height="495" width="284"]]
161 161  
162 162  
159 +If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
160 +
161 +
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,6 +174,7 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
176 +
177 177  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
179 179  
... ... @@ -187,7 +187,7 @@
187 187  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
188 188  
189 189  
190 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
190 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
191 191  
192 192  
193 193  As in the below photo:
... ... @@ -197,7 +197,7 @@
197 197  
198 198  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
200 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 201  
202 202  
203 203  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -205,6 +205,7 @@
205 205  [[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
207 207  
208 +
208 208  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -244,7 +244,7 @@
244 244  
245 245  (% style="color:blue" %)**Password:   dragino**
246 246  
247 -[[image:image-20240318160845-1.png]]
248 +[[image:image-20230106153501-1.png||height="367" width="894"]]
248 248  
249 249  
250 250  == 2.2  Typical Network Setup ==
... ... @@ -260,6 +260,8 @@
260 260  
261 261  * **Cellular Mode**
262 262  
264 +
265 +
263 263  === 2.2.2  Use WAN port to access Internet ===
264 264  
265 265  
... ... @@ -307,12 +307,8 @@
307 307  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 308  
309 309  
310 -**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 -
312 -
313 313  === 2.2.5  Check Internet connection ===
314 314  
315 -
316 316  In the **home** page, we can check the Internet connection.
317 317  
318 318  * GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
... ... @@ -433,51 +433,35 @@
433 433  
434 434  (((
435 435  Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
436 -
437 -
438 -== (% style="color:inherit; font-family:inherit; font-size:26px" %)3.4  Forwarder(%%) ==
439 439  )))
440 440  
441 -=== 3.4.1 Forwarder ~-~-> MQTT Forwarder ===
442 442  
438 +== 3.4 Network Settings ==
443 443  
444 -In the latest version, MQTT Forwarder functionality has been added to the LPS8V2 gateway by default
440 +=== 3.4.1 Network ~-~-> WiFi ===
445 445  
446 -Users can configure the MQTT Forwarder on the **Forwarder~-~->MQTT** interface, and when the configuration is successful, it will forward the sensor data of the lorawan server chirpstack built in LPS8v2
447 447  
448 -For a detailed example of this feature, see this link:**[[MQTT Forward Instruction - DRAGINO>>http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/#H3.3A0UseLoRaWANProtocolforcommunication--ForLPS8V2]]**
443 +[[image:image-20220616114756-4.png||height="251" width="669"]]
449 449  
450 -(% class="wikigeneratedid" %)
451 -[[image:image-20240831152113-2.png]]
452 452  
446 +=== 3.4.2 Network ~-~-> System Status ===
453 453  
454 -== 3.5 Network Settings ==
455 455  
456 -=== 3.5.1 Network ~-~-> WiFi ===
457 -
458 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
459 -
460 -[[image:image-20230619095946-1.png||height="332" width="827"]]
461 -
462 -
463 -=== 3.5.2 Network ~-~-> System Status ===
464 -
465 -
466 466  [[image:image-20220820134112-2.png||height="539" width="668"]]
467 467  
468 468  
469 -=== 3.5.3 Network ~-~-> Network ===
452 +=== 3.4.3 Network ~-~-> Network ===
470 470  
471 471  
472 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
455 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
473 473  
474 474  [[image:image-20230214093657-2.png||height="333" width="858"]]
475 475  
476 476  
477 -=== 3.5.4 Network ~-~-> Cellular ===
460 +=== 3.4.4 Network ~-~-> Cellular ===
478 478  
479 479  
480 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
463 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
481 481  
482 482  (% style="color:red" %)**Note: APN cannot be empty.**
483 483  
... ... @@ -484,33 +484,25 @@
484 484  [[image:image-20230228115126-1.png]]
485 485  
486 486  
487 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
470 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
488 488  
489 489  [[image:image-20230228115535-2.png||height="478" width="888"]]
490 490  
491 491  
492 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
475 +== 3.5 System ==
493 493  
494 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
477 +=== 3.5.1 System ~-~-> System Overview ===
495 495  
496 -(% class="wikigeneratedid" id="H5.MQTTForwarder" %)
497 -(% id="cke_bm_4823S" style="display:none" %)
498 498  
499 -
500 -== 3.6 System ==
501 -
502 -=== 3.6.1 System ~-~-> System Overview ===
503 -
504 -
505 505  Shows the system info:
506 506  
507 -[[image:image-20231031162854-1.png]]
482 +[[image:image-20220917144512-5.png||height="618" width="853"]]
508 508  
509 509  
510 -=== 3.6.2 System ~-~-> System General ===
485 +=== 3.5.2 System ~-~-> System General ===
511 511  
512 512  
513 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
488 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
514 514  
515 515  In addition, Users can customize the FallBack IP address.
516 516  
... ... @@ -517,29 +517,15 @@
517 517  [[image:image-20230214094058-3.png]]
518 518  
519 519  
520 -=== 3.6.3 System ~-~-> Backup/Restore ===
495 +=== 3.5.3 System ~-~-> Backup/Restore ===
521 521  
522 522  
523 -[[image:image-20231031162927-2.png]]
498 +[[image:image-20220917144725-6.png||height="208" width="869"]]
524 524  
525 -=== 3.6.4 System ~-~-> Reboot / Reset ===
526 526  
527 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
501 +=== 3.5.4 System ~-~-> Remoteit ===
528 528  
529 -ETH LED will SOLID BULE Until the restore is finished.
530 530  
531 -When the gateway restores the factory settings is complete,
532 -
533 -The WiFi configuration will enable WiFi Access Point by default.
534 -
535 -The other configuration will be restored to the default configuration.
536 -
537 -[[image:image-20240203172853-1.png||height="365" width="901"]]
538 -
539 -
540 -=== 3.6.5 System ~-~-> Remoteit ===
541 -
542 -
543 543  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
544 544  
545 545  
... ... @@ -548,7 +548,7 @@
548 548  [[image:image-20221230092303-2.png]]
549 549  
550 550  
551 -=== 3.6.6 System ~-~-> Package Management ===
512 +=== 3.5.5 System ~-~-> Package Management ===
552 552  
553 553  
554 554  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -556,114 +556,98 @@
556 556  [[image:image-20230214094316-4.png]]
557 557  
558 558  
559 -== 3.7 Logread ==
520 += 4. Build-in Server =
560 560  
561 -=== 3.7.1 LoRa Log ===
562 562  
523 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
563 563  
564 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
565 565  
566 -[[image:image-20240416112509-1.png]]
526 +[[image:image-20230214095318-5.png||height="347" width="980"]]
567 567  
568 568  
569 -=== 3.7.2 Gateway Traffic ===
529 +(% style="color:red" %)**Note:**
570 570  
571 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
531 + **Path**: System ~-~-> Built-in Server
572 572  
573 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
574 574  
534 +**Troubleshooting:**
575 575  
576 -=== 3.7.3 System Log ===
577 577  
578 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
537 +**~ 1. URL does not jump properly**
579 579  
580 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
539 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
581 581  
541 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
582 582  
583 -=== 3.7.4 Record Log ===
584 584  
585 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
544 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
586 586  
587 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
588 588  
547 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
589 589  
549 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
590 590  
591 -= 4. Build-in Server =
592 592  
593 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
552 +Login account:
594 594  
554 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
595 595  
596 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
556 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
597 597  
598 -[[image:image-20231106180816-4.png||height="416" width="896"]]
599 599  
600 -[[image:image-20231201165904-1.png||height="466" width="899"]]
559 +[[image:image-20220725171719-1.png||height="570" width="769"]]
601 601  
602 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
603 603  
604 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
562 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
605 605  
606 606  
565 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
607 607  
608 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
567 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
609 609  
569 +[[image:image-20230321092456-1.png]]
610 610  
611 -[[image:image-20230616175558-7.png||height="362" width="894"]]
612 612  
613 -[[image:image-20231201170355-2.png||height="536" width="899"]]
572 +== 4.2 Application Server ~-~- Node-Red ==
614 614  
615 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
616 616  
575 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
617 617  
618 618  
619 -== **3). Troubleshooting:** ==
578 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
620 620  
621 621  
622 -* (((
623 -=== ** If the URL does not jump properly.** ===
624 -)))
581 +[[image:image-20220725172124-3.png||height="610" width="843"]]
625 625  
626 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
627 627  
628 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
629 629  
585 +=== **Using Node-Red, InfluxDB and Grafana** ===
630 630  
631 -* (((
632 -=== ** How to install InfluxDB, Garfana.** ===
633 -)))
587 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
634 634  
635 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
636 636  
590 +the users can refer to this link to install them.
637 637  
638 -* (((
639 -=== ** How to upgrade the gateway node.js to the latest version.** ===
640 -)))
592 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
641 641  
642 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
643 643  
595 +=== **Upgrade the node.js** ===
644 644  
645 -* (((
646 -=== ** How to batch register device on the built-in Chirpstack network server** ===
647 -)))
597 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
648 648  
649 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
650 650  
600 +the users can refer to this link to upgrade them.
651 651  
652 -* (((
653 -=== ** Why my gateway is not Chirpstack?** ===
654 -)))
602 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
655 655  
656 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
657 657  
605 +== 4.3 How to disable the built-in server ==
658 658  
659 -* (((
660 -=== ** How to disable the built-in server** ===
661 -)))
662 662  
608 +Use the following commands to start and stop the TTNv3 service:
609 +
663 663  (% class="box infomessage" %)
664 664  (((
665 -Use the following commands to start and stop the TTNv3 service:**     **
666 -
667 667  **# start**
668 668  systemctl start ttnstack
669 669  
... ... @@ -677,10 +677,10 @@
677 677  systemctl disable ttnstack
678 678  )))
679 679  
680 -(% class="box infomessage" %)
681 -(((
682 682  Use the following commands to start and stop the Node-Red service:
683 683  
627 +(% class="box infomessage" %)
628 +(((
684 684  **# start**
685 685  systemctl start nodered
686 686  
... ... @@ -695,49 +695,26 @@
695 695  )))
696 696  
697 697  
698 -* (((
699 -=== ** How to choose the Chirpstack server frequency SubBand** ===
700 -)))
643 +== 4.4 How to use ChirpStack on LPS8-V2 ==
701 701  
702 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
703 703  
704 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
646 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
705 705  
706 -[[image:image-20230602140406-3.png||height="480" width="918"]]
648 +[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
707 707  
650 +[[image:image-20230222094908-1.png||height="133" width="798"]]
708 708  
709 -When the configuration is complete, click** "Save&Apply"**.
710 710  
653 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
711 711  
712 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
713 713  
714 -[[image:image-20230602143122-4.png||height="511" width="983"]]
715 715  
716 -
717 -
718 -= 5. Watch Dog =
719 -
720 -
721 -The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
722 -
723 -
724 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
725 -
726 -The uses can be via the below method to enable Watch Dog:
727 -
728 -(% class="box infomessage" %)
729 -(((
730 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
731 -)))
732 -
733 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
734 -
735 -
736 736  = 6. How users can access LPS8-V2 using serial USB =
737 737  
738 738  
739 739  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
740 740  
662 +
741 741  Port 1 of the UART on the LPS8-V2 is GND
742 742  
743 743  (% class="box infomessage" %)
... ... @@ -749,8 +749,10 @@
749 749  **GND <~-~--> GND (Black line)**
750 750  )))
751 751  
674 +
752 752  **LPS8v2 UART connection photo**
753 753  
677 +
754 754  [[image:image-20230421094319-2.png||height="351" width="392"]]
755 755  
756 756  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -762,329 +762,120 @@
762 762  [[image:image-20220804164747-2.png||height="622" width="594"]]
763 763  
764 764  
765 -= 7. OTA System Update =
689 += 7. Use the helium gateway-rs as the Data-only Hotspot =
766 766  
767 767  
768 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
692 +== **Step 1: Configure Frequency Band** ==
769 769  
770 770  
771 -== 7.1 Auto-update method ==
695 +//Each country has a requirement for frequency region. Choose the right one for your area.//
772 772  
697 +[[image:image-20220905164308-1.png]]
773 773  
774 -The default, each gateway will enable the auto-update function.
775 775  
776 -this function will be triggered every boot and every midnight.
777 777  
701 +== **Step 2: Configure the forward address** ==
778 778  
779 -Users can enable/disable it via Web Page
780 780  
781 -[[image:image-20230607094447-2.png]]
704 +**Select one of the servers to configure.**
782 782  
706 +**For example:**
783 783  
784 -== 7.2 Manual upgrade method ==
708 +[[image:image-20220905164847-2.png]]
785 785  
786 786  
787 -1). Using the Linux command to upgrade the system
788 788  
789 -(% class="box infomessage" %)
790 -(((
791 -**apt update && apt install *dragino***
792 -)))
712 +== **Step 3: Download and Install the Helium-gateway-rs** ==
793 793  
794 794  
795 -2). Upgrade the system via the Web page button of "Manual Update"
715 +**Access the gateway CLI via SSH.**
796 796  
797 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
717 +[[image:image-20230425153417-2.png]]
798 798  
799 -[[image:image-20230607093849-1.png]]
800 800  
720 +**Install the new gateway-rs**
801 801  
802 -= (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)8 How do I view gateway logs(%%) =
803 -
804 -=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)8.1 LoRaWAN Log:(%%) ===
805 -
806 -
807 -==== Semtech UDP Log : ====
808 -
809 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
810 -
811 -[[image:image-20231017112115-2.png||height="611" width="821"]]
812 -
813 -
814 -==== Station Log: ====
815 -
816 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
817 -
818 -[[image:image-20231017111606-1.png||height="622" width="821"]]
819 -
820 -
821 -=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)8.2  4G Log(%%) ===
822 -
823 -
824 -User needs to access the Linux console of the gateway and enter the following command:
825 -
826 826  (% class="box infomessage" %)
827 827  (((
828 -cat /var/log/qmilog.txt
724 +**apt update && apt install helium-gateway**
829 829  )))
830 830  
831 -[[image:image-20231017114417-3.png||height="543" width="679"]]
727 +[[image:image-20230425154058-4.png]]
832 832  
833 833  
834 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
835 835  
836 -Below are some commands as reference:
731 +Option: If you installed the older gateway-rs, you have clean it
837 837  
838 ->Usage:  /usr/bin/quectel-CM [options]
839 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
840 -> -p pincode Verify sim card pin if sim card is locked
841 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
842 -> -f logfilename Save log message of this program to file
843 -> -u usbmonlog filename  Save usbmon log to file
844 -> -i interface Specify which network interface to setup data call when multi-modems exits
845 -> -4 Setup IPv4 data call (default)
846 -> -6 Setup IPv6 data call
847 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
848 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
849 -> -b Enable network interface bridge function (default 0)
850 -> -v Verbose log mode, for debug purpose.[Examples]
851 ->Example 1: /usr/bin/quectel-CM
852 ->Example 2: /usr/bin/quectel-CM -s 3gnet
853 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
854 -
855 -
856 -
857 -=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)8.3 Dmesg Log(%%) ===
858 -
859 -
860 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
861 -
862 -[[image:image-20231017115330-5.png||height="565" width="740"]]
863 -
864 -
865 -=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)8.4 Record Log(%%) ===
866 -
867 -
868 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
869 -
870 -[[image:image-20231017115124-4.png||height="215" width="880"]]
871 -
872 -
873 -=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)8.5 View gateway logs via Linux Command(%%) ===
874 -
875 -
876 -**Semtech UDP Log :**
877 -
878 878  (% class="box infomessage" %)
879 879  (((
880 -**journalctl -u draginofwd -f**
735 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
881 881  )))
882 882  
883 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
738 +[[image:image-20230425153823-3.png]]
884 884  
885 885  
886 -**Station Log:**
741 +**Change the region setting:**
887 887  
888 -(% class="box infomessage" %)
889 -(((
890 -**tail -f /var/log/station.log **
891 -)))
892 892  
893 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
894 -
895 -
896 -**Dmesg Log:**
897 -
898 898  (% class="box infomessage" %)
899 899  (((
900 -**dmesg**
901 -)))
746 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
902 902  
903 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
904 904  
749 +**e.g: **
905 905  
751 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
906 906  
907 -(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
908 -= (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)9. More Services(%%) =
909 -
910 -== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)9.1 NTP Service/Time Synchronization(%%) ==
911 -
912 -The gateway time sync service is provided by chrony service
913 -
914 -
915 -=== 1). Modify the NTP server address: ===
916 -
917 -(% class="box infomessage" %)
918 -(((
919 -Configuration file path:  /etc/chrony/chrony.conf
753 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
920 920  )))
921 921  
922 922  
923 -=== 2). Start/Stop/Enable/Disable NTP service: ===
757 +**Restart the gateway-rs**
924 924  
925 925  (% class="box infomessage" %)
926 926  (((
927 -systemctl start chrony
928 -\\systemctl stop chrony
929 -\\systemctl disable chrony
930 -\\systemctl enable chrony
761 +**systemctl restart helium_gateway**
931 931  )))
932 932  
764 +[[image:image-20230425155612-7.png||height="265" width="911"]]
933 933  
934 -(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
935 -= (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10. More features(%%) =
936 936  
937 -(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
938 -== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)10.1 Chirpstack MQTT Forwarder(%%) ==
939 939  
768 +**Check the helium_gateway running status**
940 940  
941 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
942 942  
943 -
944 -(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
945 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
946 -
947 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
948 -
949 -(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
950 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
951 -
952 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
953 -* Configure the following settings:
954 -** **Service Provider:** //Custom / Private LoRaWAN//
955 -** **Server Address:** localhost
956 -** **Uplink Port:** 1700
957 -** **Downlink Port:** 1700
958 -* Click **Save & Apply**
959 -
960 -[[image:image-20240518145929-2.png||height="652" width="727"]]
961 -
962 -
963 -(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
964 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
965 -
966 -
967 -(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
968 -(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
969 -
970 -First you must login into the gateway using SSH:
971 -
972 -(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
771 +(% class="box infomessage" %)
973 973  (((
974 -ssh root@GATEWAY-IP-ADDRESS
773 +**systemctl status helium_gateway**
975 975  )))
976 976  
977 -(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
978 -The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
979 979  
777 +[[image:image-20230425154740-5.png]]
980 980  
981 -(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
982 -(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
983 983  
984 -(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
985 -Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
986 986  
987 -(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
988 -(((
989 -cd /tmp
990 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
991 -)))
781 +**Check the helium_gateway Log：**
992 992  
993 -
994 -(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
995 -(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
996 -
997 -Use the dpkg package-manager to install the downloaded package. Example:
998 -
999 -(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
783 +(% class="box infomessage" %)
1000 1000  (((
1001 -dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
785 +**journalctl -u helium_gateway -f**
1002 1002  )))
1003 1003  
1004 -[[image:image-20240518152148-4.png]]
1005 1005  
789 +[[image:image-20230425155659-8.png]]
1006 1006  
1007 -(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
1008 -**Configuration**
1009 1009  
1010 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
792 += 8. OTA System Update =
1011 1011  
1012 -(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
1013 -This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1014 1014  
795 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1015 1015  
1016 -**ChirpStack MQTT Forwarder Setting:**
1017 1017  
1018 -(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1019 -(((
1020 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
798 += 9. FAQ =
1021 1021  
1022 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1023 -)))
800 +== 9.1 How to change Hostname ==
1024 1024  
1025 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1026 1026  
1027 -
1028 -Use commands to modify configuration files:
1029 -
1030 -(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1031 -(((
1032 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1033 -)))
1034 -
1035 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1036 -
1037 -
1038 -**(Re)start and stop commands**
1039 -
1040 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1041 -
1042 -(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1043 -(((
1044 -# start
1045 -
1046 -(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1047 -systemctl start chirpstack-mqtt-forwarder
1048 -
1049 -# stop
1050 -
1051 -systemctl stop chirpstack-mqtt-forwarder
1052 -
1053 -# restart
1054 -
1055 -systemctl restart chirpstack-mqtt-forwarder
1056 -)))
1057 -
1058 -(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1059 -(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1060 -
1061 -
1062 -**Check result**
1063 -
1064 -(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1065 -Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
1066 -
1067 -[[image:image-20240518154223-5.png]]
1068 -
1069 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1070 -
1071 -
1072 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.2 As a Data-only hotspot connect the helium blockchain(%%) ==
1073 -
1074 -
1075 -(% class="box infomessage" %)
1076 -(((
1077 -(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1078 -apt update && apt install helium-gateway
1079 -)))
1080 -
1081 -
1082 -
1083 -= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11. FAQ(%%) =
1084 -
1085 -== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)11.1 How to change Hostname(%%) ==
1086 -
1087 -
1088 1088  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
1089 1089  
1090 1090  (% class="box infomessage" %)
... ... @@ -1097,90 +1097,11 @@
1097 1097  After the configuration is complete, run "reboot" to restart the gateway.
1098 1098  
1099 1099  
1100 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
815 += 10. Trouble Shooting =
1101 1101  
817 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1102 1102  
1103 -Migrate guide:
1104 1104  
1105 -To stabilize the completion of the migration, The users can migrate in one of the following ways
1106 -
1107 -**Method 1. Using the Linux shell, **
1108 -
1109 -**Method 2. Flash a new image with the Chirpstack**
1110 -
1111 -
1112 -=== Method 1: Using the Linux shell ===
1113 -
1114 -(% class="box infomessage" %)
1115 -(((
1116 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1117 -)))
1118 -
1119 -
1120 -=== Method 2: Flash a new image ===
1121 -
1122 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1123 -
1124 -
1125 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
1126 -
1127 -
1128 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
1129 -
1130 -[[image:image-20230719100239-1.png||height="724" width="994"]]
1131 -
1132 -
1133 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
1134 -
1135 -[[image:image-20230719100332-2.png]]
1136 -
1137 -
1138 -3. Disable the auto-update:
1139 -
1140 -[[image:image-20230719100419-3.png||height="458" width="995"]]
1141 -
1142 -
1143 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
1144 -
1145 -
1146 -By default, the LPS8v2's built-in server is ChirpStack v4,
1147 -
1148 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1149 -
1150 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
1151 -
1152 -
1153 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1154 -
1155 -
1156 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).5 (%%)How to check my USB port dev/tty after i plug in USB device. ==
1157 -
1158 -
1159 -When an external USB device is connected to LPS8v2, the user can access the Linux console of the LPS8v2 gateway and run the following command to check the USB port dev/tty:
1160 -
1161 -(% class="box infomessage" %)
1162 -(((
1163 -dmesg
1164 -)))
1165 -
1166 -[[image:image-20240803095144-1.png]]
1167 -
1168 -
1169 -
1170 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).6 DIN Mount Reference:(%%) ==
1171 -
1172 -
1173 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1174 -
1175 -[[image:image-20240318095617-2.png]]
1176 -
1177 -
1178 -
1179 -
1180 -= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12. Trouble Shooting(%%) =
1181 -
1182 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)12.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1183 -
1184 1184  [[image:image-20220920135918-1.png]]
1185 1185  
1186 1186  
... ... @@ -1196,7 +1196,7 @@
1196 1196  [[image:image-20220920141936-2.png]]
1197 1197  
1198 1198  
1199 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
835 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1200 1200  
1201 1201  
1202 1202  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -1204,13 +1204,13 @@
1204 1204  [[image:image-20230508171607-1.png]]
1205 1205  
1206 1206  
1207 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
843 +== 10.3  Fallback IP does not work, how can users check ==
1208 1208  
1209 1209  
1210 1210  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1211 1211  
1212 1212  
1213 -**~1. Check whether the configuration is correct**
849 +**1.Check whether the configuration is correct**
1214 1214  
1215 1215  Run the CMD command to ipconfig and ping 172.31.255.254.
1216 1216  
... ... @@ -1226,7 +1226,7 @@
1226 1226  If the firewall is not down, this will affect access to the gateway.
1227 1227  
1228 1228  
1229 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
865 +== 10.4  Click "Manual_Update", why there is no response? ==
1230 1230  
1231 1231  
1232 1232  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -1235,40 +1235,10 @@
1235 1235  [[image:image-20230527090555-3.png||height="660" width="832"]]
1236 1236  
1237 1237  
1238 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
874 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
1239 1239  
1240 1240  
1241 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1242 -
1243 -(% class="box infomessage" %)
1244 1244  (((
1245 -apt update && apt install *dragino*
1246 -
1247 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1248 -)))
1249 -
1250 -
1251 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1252 -
1253 -
1254 -**1) Build-in The Things Network**
1255 -
1256 -Refer to this link to delete the Built-in server's device.
1257 -
1258 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1259 -
1260 -
1261 -**2) Build-in Chirpstack**
1262 -
1263 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1264 -
1265 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1266 -
1267 -
1268 -= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)13. Supports(%%) =
1269 -
1270 -
1271 -(((
1272 1272  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1273 1273  )))
1274 1274  
... ... @@ -1276,16 +1276,17 @@
1276 1276  With your question as detailed as possible. We will reply and help you in the shortest.
1277 1277  
1278 1278  
1279 -= (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)14. Reference(%%) =
885 += 12. Reference =
1280 1280  
1281 1281  
1282 1282  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
1283 1283  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
1284 1284  
891 +
1285 1285  
1286 1286  )))
1287 1287  
1288 -= (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)15. Order Info(%%) =
895 += 13. Order Info =
1289 1289  
1290 1290  
1291 1291  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1293,31 +1293,23 @@
1293 1293  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
1294 1294  
1295 1295  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1296 -
1297 1297  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1298 -
1299 1299  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1300 -
1301 1301  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1302 -
1303 1303  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1304 -
1305 1305  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1306 1306  
1307 1307  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
1308 1308  
1309 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
911 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
912 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
913 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
914 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1310 1310  
1311 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1312 -
1313 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1314 -
1315 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1316 -
1317 1317  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1318 1318  
1319 1319  
1320 -= (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)16. Manufacturer Info(%%) =
919 += 14. Manufacturer Info =
1321 1321  
1322 1322  
1323 1323  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1327,7 +1327,7 @@
1327 1327  LongCheng Street, LongGang District ; Shenzhen 518116,China
1328 1328  
1329 1329  
1330 -= (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)17. FCC Warning(%%) =
929 += 15. FCC Warning =
1331 1331  
1332 1332  
1333 1333  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -71.7 KB
Content
image-20240803095144-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.0 KB
Content
image-20240831151427-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
image-20240831152113-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
image-20240902092034-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -69.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0