Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 325.1 >
edited by Kilight Cao
on 2024/09/02 08:53
To version < 210.1 >
edited by Kilight Cao
on 2023/06/02 14:31
>
Change comment: Uploaded new attachment "image-20230602143122-4.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
21 +== 1.1 What is LPS8v2 ==
22 22  
23 23  
24 24  (((
... ... @@ -66,6 +66,7 @@
66 66  * Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 +
69 69  == 1.3 Features ==
70 70  
71 71  
... ... @@ -81,12 +81,17 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
85 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
86 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
88 88  
89 +== 1.4 Block Diagram ==
89 89  
91 +
92 +
93 +== 1.5 LED Indicators ==
94 +
95 +
90 90  LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
... ... @@ -96,16 +96,16 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
105 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
107 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
109 + ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
107 107  
108 -== 1.5 Button Intruction ==
114 +== 1.6 Button Intruction ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -113,26 +113,14 @@
113 113  
114 114  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
122 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
125 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
127 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 136  = 2. Quick Start =
137 137  
138 138  
... ... @@ -141,9 +141,9 @@
141 141  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
142 142  
143 143  
144 -== 2.1 Access and Configure LPS8-V2 ==
138 +== 2.1 Connects to the network and accesses the gateway Web UI ==
145 145  
146 -=== 2.1.1 Find IP address of LPS8-V2 ===
140 +=== 2.1.1 connect the network ===
147 147  
148 148  
149 149  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -151,7 +151,7 @@
151 151  
152 152  Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
153 153  
154 -(% style="background-color:yellow" %)**dragino+dragino**
148 + (% style="background-color:yellow" %)**dragino+dragino**
155 155  
156 156  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
157 157  
... ... @@ -160,6 +160,9 @@
160 160  [[image:image-20230527085250-2.png||height="495" width="284"]]
161 161  
162 162  
157 +If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
158 +
159 +
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,6 +174,7 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
174 +
177 177  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
179 179  
... ... @@ -187,7 +187,7 @@
187 187  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
188 188  
189 189  
190 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
188 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
191 191  
192 192  
193 193  As in the below photo:
... ... @@ -197,7 +197,7 @@
197 197  
198 198  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
198 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 201  
202 202  
203 203  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -205,6 +205,7 @@
205 205  [[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
207 207  
206 +
208 208  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -244,7 +244,7 @@
244 244  
245 245  (% style="color:blue" %)**Password:   dragino**
246 246  
247 -[[image:image-20240318160845-1.png]]
246 +[[image:image-20230106153501-1.png||height="367" width="894"]]
248 248  
249 249  
250 250  == 2.2  Typical Network Setup ==
... ... @@ -260,6 +260,7 @@
260 260  
261 261  * **Cellular Mode**
262 262  
262 +
263 263  === 2.2.2  Use WAN port to access Internet ===
264 264  
265 265  
... ... @@ -307,12 +307,8 @@
307 307  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 308  
309 309  
310 -**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 -
312 -
313 313  === 2.2.5  Check Internet connection ===
314 314  
315 -
316 316  In the **home** page, we can check the Internet connection.
317 317  
318 318  * GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
... ... @@ -440,9 +440,8 @@
440 440  
441 441  === 3.4.1 Network ~-~-> WiFi ===
442 442  
443 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
444 444  
445 -[[image:image-20230619095946-1.png||height="332" width="827"]]
440 +[[image:image-20220616114756-4.png||height="251" width="669"]]
446 446  
447 447  
448 448  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -454,7 +454,7 @@
454 454  === 3.4.3 Network ~-~-> Network ===
455 455  
456 456  
457 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
452 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
458 458  
459 459  [[image:image-20230214093657-2.png||height="333" width="858"]]
460 460  
... ... @@ -462,7 +462,7 @@
462 462  === 3.4.4 Network ~-~-> Cellular ===
463 463  
464 464  
465 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
460 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
466 466  
467 467  (% style="color:red" %)**Note: APN cannot be empty.**
468 468  
... ... @@ -469,49 +469,25 @@
469 469  [[image:image-20230228115126-1.png]]
470 470  
471 471  
472 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
467 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
473 473  
474 474  [[image:image-20230228115535-2.png||height="478" width="888"]]
475 475  
476 476  
477 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
472 +== 3.5 System ==
478 478  
479 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
474 +=== 3.5.1 System ~-~-> System Overview ===
480 480  
481 -(% class="wikigeneratedid" id="H5.MQTTForwarder" %)
482 -(% id="cke_bm_4823S" style="display:none" %)
483 483  
484 -(% class="wikigeneratedid" %)
485 -== 3.5 Forwarder ==
486 -
487 -(% class="wikigeneratedid" %)
488 -=== 3.5.1 Forwarder~-~->MQTT Forwarder ===
489 -
490 -
491 -In the latest version, MQTT Forwarder functionality has been added to the LPS8V2 gateway by default
492 -
493 -Users can configure the MQTT Forwarder on the **Forwarder~-~->MQTT** interface, and when the configuration is successful, it will forward the sensor data of the lorawan server chirpstack built in LPS8v2
494 -
495 -For a detailed example of this feature, see this link:**[[MQTT Forward Instruction - DRAGINO>>http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/#H3.3A0UseLoRaWANProtocolforcommunication--ForLPS8V2]]**
496 -
497 -(% class="wikigeneratedid" %)
498 -[[image:image-20240831152113-2.png]]
499 -
500 -
501 -== 3.6 System ==
502 -
503 -=== 3.6.1 System ~-~-> System Overview ===
504 -
505 -
506 506  Shows the system info:
507 507  
508 -[[image:image-20231031162854-1.png]]
479 +[[image:image-20220917144512-5.png||height="618" width="853"]]
509 509  
510 510  
511 -=== 3.6.2 System ~-~-> System General ===
482 +=== 3.5.2 System ~-~-> System General ===
512 512  
513 513  
514 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
485 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
515 515  
516 516  In addition, Users can customize the FallBack IP address.
517 517  
... ... @@ -518,29 +518,15 @@
518 518  [[image:image-20230214094058-3.png]]
519 519  
520 520  
521 -=== 3.6.3 System ~-~-> Backup/Restore ===
492 +=== 3.5.3 System ~-~-> Backup/Restore ===
522 522  
523 523  
524 -[[image:image-20231031162927-2.png]]
495 +[[image:image-20220917144725-6.png||height="208" width="869"]]
525 525  
526 -=== 3.6.4 System ~-~-> Reboot / Reset ===
527 527  
528 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
498 +=== 3.5.4 System ~-~-> Remoteit ===
529 529  
530 -ETH LED will SOLID BULE Until the restore is finished.
531 531  
532 -When the gateway restores the factory settings is complete,
533 -
534 -The WiFi configuration will enable WiFi Access Point by default.
535 -
536 -The other configuration will be restored to the default configuration.
537 -
538 -[[image:image-20240203172853-1.png||height="365" width="901"]]
539 -
540 -
541 -=== 3.6.5 System ~-~-> Remoteit ===
542 -
543 -
544 544  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
545 545  
546 546  
... ... @@ -549,7 +549,7 @@
549 549  [[image:image-20221230092303-2.png]]
550 550  
551 551  
552 -=== 3.6.6 System ~-~-> Package Management ===
509 +=== 3.5.5 System ~-~-> Package Management ===
553 553  
554 554  
555 555  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -557,114 +557,98 @@
557 557  [[image:image-20230214094316-4.png]]
558 558  
559 559  
560 -== 3.7 Logread ==
517 += 4. Build-in Server =
561 561  
562 -=== 3.7.1 LoRa Log ===
563 563  
520 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
564 564  
565 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
566 566  
567 -[[image:image-20240416112509-1.png]]
523 +[[image:image-20230214095318-5.png||height="347" width="980"]]
568 568  
569 569  
570 -=== 3.7.2 Gateway Traffic ===
526 +(% style="color:red" %)**Note:**
571 571  
572 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
528 + **Path**: System ~-~-> Built-in Server
573 573  
574 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
575 575  
531 +**Troubleshooting:**
576 576  
577 -=== 3.7.3 System Log ===
578 578  
579 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
534 +**~ 1. URL does not jump properly**
580 580  
581 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
536 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
582 582  
538 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
583 583  
584 -=== 3.7.4 Record Log ===
585 585  
586 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
541 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
587 587  
588 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
589 589  
544 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
590 590  
546 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
591 591  
592 -= 4. Build-in Server =
593 593  
594 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
549 +Login account:
595 595  
551 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
596 596  
597 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
553 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
598 598  
599 -[[image:image-20231106180816-4.png||height="416" width="896"]]
600 600  
601 -[[image:image-20231201165904-1.png||height="466" width="899"]]
556 +[[image:image-20220725171719-1.png||height="570" width="769"]]
602 602  
603 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
604 604  
605 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
559 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
606 606  
607 607  
562 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
608 608  
609 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
564 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
610 610  
566 +[[image:image-20230321092456-1.png]]
611 611  
612 -[[image:image-20230616175558-7.png||height="362" width="894"]]
613 613  
614 -[[image:image-20231201170355-2.png||height="536" width="899"]]
569 +== 4.2 Application Server ~-~- Node-Red ==
615 615  
616 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
617 617  
572 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
618 618  
619 619  
620 -== **3). Troubleshooting:** ==
575 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
621 621  
622 622  
623 -* (((
624 -=== ** If the URL does not jump properly.** ===
625 -)))
578 +[[image:image-20220725172124-3.png||height="610" width="843"]]
626 626  
627 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
628 628  
629 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
630 630  
582 +=== **Using Node-Red, InfluxDB and Grafana** ===
631 631  
632 -* (((
633 -=== ** How to install InfluxDB, Garfana.** ===
634 -)))
584 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
635 635  
636 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
637 637  
587 +the users can refer to this link to install them.
638 638  
639 -* (((
640 -=== ** How to upgrade the gateway node.js to the latest version.** ===
641 -)))
589 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
642 642  
643 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
644 644  
592 +=== **Upgrade the node.js** ===
645 645  
646 -* (((
647 -=== ** How to batch register device on the built-in Chirpstack network server** ===
648 -)))
594 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
649 649  
650 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
651 651  
597 +the users can refer to this link to upgrade them.
652 652  
653 -* (((
654 -=== ** Why my gateway is not Chirpstack?** ===
655 -)))
599 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
656 656  
657 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
658 658  
602 +== 4.3 How to disable the built-in server ==
659 659  
660 -* (((
661 -=== ** How to disable the built-in server** ===
662 -)))
663 663  
605 +Use the following commands to start and stop the TTNv3 service:
606 +
664 664  (% class="box infomessage" %)
665 665  (((
666 -Use the following commands to start and stop the TTNv3 service:**     **
667 -
668 668  **# start**
669 669  systemctl start ttnstack
670 670  
... ... @@ -678,10 +678,10 @@
678 678  systemctl disable ttnstack
679 679  )))
680 680  
681 -(% class="box infomessage" %)
682 -(((
683 683  Use the following commands to start and stop the Node-Red service:
684 684  
624 +(% class="box infomessage" %)
625 +(((
685 685  **# start**
686 686  systemctl start nodered
687 687  
... ... @@ -696,49 +696,26 @@
696 696  )))
697 697  
698 698  
699 -* (((
700 -=== ** How to choose the Chirpstack server frequency SubBand** ===
701 -)))
640 +== 4.4 How to use ChirpStack on LPS8-V2 ==
702 702  
703 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
704 704  
705 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
643 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
706 706  
707 -[[image:image-20230602140406-3.png||height="480" width="918"]]
645 +[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
708 708  
647 +[[image:image-20230222094908-1.png||height="133" width="798"]]
709 709  
710 -When the configuration is complete, click** "Save&Apply"**.
711 711  
650 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
712 712  
713 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
714 714  
715 -[[image:image-20230602143122-4.png||height="511" width="983"]]
716 716  
717 -
718 -
719 -= 5. Watch Dog =
720 -
721 -
722 -The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
723 -
724 -
725 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
726 -
727 -The uses can be via the below method to enable Watch Dog:
728 -
729 -(% class="box infomessage" %)
730 -(((
731 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
732 -)))
733 -
734 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
735 -
736 -
737 737  = 6. How users can access LPS8-V2 using serial USB =
738 738  
739 739  
740 740  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
741 741  
659 +
742 742  Port 1 of the UART on the LPS8-V2 is GND
743 743  
744 744  (% class="box infomessage" %)
... ... @@ -750,8 +750,10 @@
750 750  **GND <~-~--> GND (Black line)**
751 751  )))
752 752  
671 +
753 753  **LPS8v2 UART connection photo**
754 754  
674 +
755 755  [[image:image-20230421094319-2.png||height="351" width="392"]]
756 756  
757 757  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -763,329 +763,120 @@
763 763  [[image:image-20220804164747-2.png||height="622" width="594"]]
764 764  
765 765  
766 -= 7. OTA System Update =
686 += 7. Use the helium gateway-rs as the Data-only Hotspot =
767 767  
768 768  
769 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
689 +== **Step 1: Configure Frequency Band** ==
770 770  
771 771  
772 -== 7.1 Auto-update method ==
692 +//Each country has a requirement for frequency region. Choose the right one for your area.//
773 773  
694 +[[image:image-20220905164308-1.png]]
774 774  
775 -The default, each gateway will enable the auto-update function.
776 776  
777 -this function will be triggered every boot and every midnight.
778 778  
698 +== **Step 2: Configure the forward address** ==
779 779  
780 -Users can enable/disable it via Web Page
781 781  
782 -[[image:image-20230607094447-2.png]]
701 +**Select one of the servers to configure.**
783 783  
703 +**For example:**
784 784  
785 -== 7.2 Manual upgrade method ==
705 +[[image:image-20220905164847-2.png]]
786 786  
787 787  
788 -1). Using the Linux command to upgrade the system
789 789  
790 -(% class="box infomessage" %)
791 -(((
792 -**apt update && apt install *dragino***
793 -)))
709 +== **Step 3: Download and Install the Helium-gateway-rs** ==
794 794  
795 795  
796 -2). Upgrade the system via the Web page button of "Manual Update"
712 +**Access the gateway CLI via SSH.**
797 797  
798 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
714 +[[image:image-20230425153417-2.png]]
799 799  
800 -[[image:image-20230607093849-1.png]]
801 801  
717 +**Install the new gateway-rs**
802 802  
803 -= (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)8 How do I view gateway logs(%%) =
804 -
805 -=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)8.1 LoRaWAN Log:(%%) ===
806 -
807 -
808 -==== Semtech UDP Log : ====
809 -
810 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
811 -
812 -[[image:image-20231017112115-2.png||height="611" width="821"]]
813 -
814 -
815 -==== Station Log: ====
816 -
817 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
818 -
819 -[[image:image-20231017111606-1.png||height="622" width="821"]]
820 -
821 -
822 -=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)8.2  4G Log(%%) ===
823 -
824 -
825 -User needs to access the Linux console of the gateway and enter the following command:
826 -
827 827  (% class="box infomessage" %)
828 828  (((
829 -cat /var/log/qmilog.txt
721 +**apt update && apt install helium-gateway**
830 830  )))
831 831  
832 -[[image:image-20231017114417-3.png||height="543" width="679"]]
724 +[[image:image-20230425154058-4.png]]
833 833  
834 834  
835 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
836 836  
837 -Below are some commands as reference:
728 +Option: If you installed the older gateway-rs, you have clean it
838 838  
839 ->Usage:  /usr/bin/quectel-CM [options]
840 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
841 -> -p pincode Verify sim card pin if sim card is locked
842 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
843 -> -f logfilename Save log message of this program to file
844 -> -u usbmonlog filename  Save usbmon log to file
845 -> -i interface Specify which network interface to setup data call when multi-modems exits
846 -> -4 Setup IPv4 data call (default)
847 -> -6 Setup IPv6 data call
848 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
849 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
850 -> -b Enable network interface bridge function (default 0)
851 -> -v Verbose log mode, for debug purpose.[Examples]
852 ->Example 1: /usr/bin/quectel-CM
853 ->Example 2: /usr/bin/quectel-CM -s 3gnet
854 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
855 -
856 -
857 -
858 -=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)8.3 Dmesg Log(%%) ===
859 -
860 -
861 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
862 -
863 -[[image:image-20231017115330-5.png||height="565" width="740"]]
864 -
865 -
866 -=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)8.4 Record Log(%%) ===
867 -
868 -
869 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
870 -
871 -[[image:image-20231017115124-4.png||height="215" width="880"]]
872 -
873 -
874 -=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)8.5 View gateway logs via Linux Command(%%) ===
875 -
876 -
877 -**Semtech UDP Log :**
878 -
879 879  (% class="box infomessage" %)
880 880  (((
881 -**journalctl -u draginofwd -f**
732 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
882 882  )))
883 883  
884 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
735 +[[image:image-20230425153823-3.png]]
885 885  
886 886  
887 -**Station Log:**
738 +**Change the region setting:**
888 888  
889 -(% class="box infomessage" %)
890 -(((
891 -**tail -f /var/log/station.log **
892 -)))
893 893  
894 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
895 -
896 -
897 -**Dmesg Log:**
898 -
899 899  (% class="box infomessage" %)
900 900  (((
901 -**dmesg**
902 -)))
743 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
903 903  
904 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
905 905  
746 +**e.g: **
906 906  
748 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
907 907  
908 -(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
909 -= (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)9. More Services(%%) =
910 -
911 -== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)9.1 NTP Service/Time Synchronization(%%) ==
912 -
913 -The gateway time sync service is provided by chrony service
914 -
915 -
916 -=== 1). Modify the NTP server address: ===
917 -
918 -(% class="box infomessage" %)
919 -(((
920 -Configuration file path:  /etc/chrony/chrony.conf
750 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
921 921  )))
922 922  
923 923  
924 -=== 2). Start/Stop/Enable/Disable NTP service: ===
754 +**Restart the gateway-rs**
925 925  
926 926  (% class="box infomessage" %)
927 927  (((
928 -systemctl start chrony
929 -\\systemctl stop chrony
930 -\\systemctl disable chrony
931 -\\systemctl enable chrony
758 +**systemctl restart helium_gateway**
932 932  )))
933 933  
761 +[[image:image-20230425155612-7.png||height="265" width="911"]]
934 934  
935 -(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
936 -= (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10. More features(%%) =
937 937  
938 -(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
939 -== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)10.1 Chirpstack MQTT Forwarder(%%) ==
940 940  
765 +**Check the helium_gateway running status**
941 941  
942 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
943 943  
944 -
945 -(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
946 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
947 -
948 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
949 -
950 -(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
951 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
952 -
953 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
954 -* Configure the following settings:
955 -** **Service Provider:** //Custom / Private LoRaWAN//
956 -** **Server Address:** localhost
957 -** **Uplink Port:** 1700
958 -** **Downlink Port:** 1700
959 -* Click **Save & Apply**
960 -
961 -[[image:image-20240518145929-2.png||height="652" width="727"]]
962 -
963 -
964 -(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
965 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
966 -
967 -
968 -(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
969 -(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
970 -
971 -First you must login into the gateway using SSH:
972 -
973 -(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
768 +(% class="box infomessage" %)
974 974  (((
975 -ssh root@GATEWAY-IP-ADDRESS
770 +**systemctl status helium_gateway**
976 976  )))
977 977  
978 -(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
979 -The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
980 980  
774 +[[image:image-20230425154740-5.png]]
981 981  
982 -(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
983 -(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
984 984  
985 -(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
986 -Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
987 987  
988 -(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
989 -(((
990 -cd /tmp
991 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
992 -)))
778 +**Check the helium_gateway Log：**
993 993  
994 -
995 -(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
996 -(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
997 -
998 -Use the dpkg package-manager to install the downloaded package. Example:
999 -
1000 -(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
780 +(% class="box infomessage" %)
1001 1001  (((
1002 -dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
782 +**journalctl -u helium_gateway -f**
1003 1003  )))
1004 1004  
1005 -[[image:image-20240518152148-4.png]]
1006 1006  
786 +[[image:image-20230425155659-8.png]]
1007 1007  
1008 -(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
1009 -**Configuration**
1010 1010  
1011 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
789 += 8. OTA System Update =
1012 1012  
1013 -(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
1014 -This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1015 1015  
792 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1016 1016  
1017 -**ChirpStack MQTT Forwarder Setting:**
1018 1018  
1019 -(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1020 -(((
1021 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
795 += 9. FAQ =
1022 1022  
1023 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1024 -)))
797 +== 9.1 How to change Hostname ==
1025 1025  
1026 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1027 1027  
1028 -
1029 -Use commands to modify configuration files:
1030 -
1031 -(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1032 -(((
1033 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1034 -)))
1035 -
1036 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1037 -
1038 -
1039 -**(Re)start and stop commands**
1040 -
1041 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1042 -
1043 -(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1044 -(((
1045 -# start
1046 -
1047 -(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1048 -systemctl start chirpstack-mqtt-forwarder
1049 -
1050 -# stop
1051 -
1052 -systemctl stop chirpstack-mqtt-forwarder
1053 -
1054 -# restart
1055 -
1056 -systemctl restart chirpstack-mqtt-forwarder
1057 -)))
1058 -
1059 -(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1060 -(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1061 -
1062 -
1063 -**Check result**
1064 -
1065 -(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1066 -Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
1067 -
1068 -[[image:image-20240518154223-5.png]]
1069 -
1070 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1071 -
1072 -
1073 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.2 As a Data-only hotspot connect the helium blockchain(%%) ==
1074 -
1075 -
1076 -(% class="box infomessage" %)
1077 -(((
1078 -(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1079 -apt update && apt install helium-gateway
1080 -)))
1081 -
1082 -
1083 -
1084 -= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11. FAQ(%%) =
1085 -
1086 -== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)11.1 How to change Hostname(%%) ==
1087 -
1088 -
1089 1089  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
1090 1090  
1091 1091  (% class="box infomessage" %)
... ... @@ -1098,90 +1098,34 @@
1098 1098  After the configuration is complete, run "reboot" to restart the gateway.
1099 1099  
1100 1100  
1101 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
812 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
1102 1102  
1103 1103  
1104 1104  Migrate guide:
1105 1105  
1106 -To stabilize the completion of the migration, The users can migrate in one of the following ways
817 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
1107 1107  
1108 -**Method 1. Using the Linux shell, **
819 +2. Download migrate script and run it.
1109 1109  
1110 -**Method 2. Flash a new image with the Chirpstack**
1111 -
1112 -
1113 -=== Method 1: Using the Linux shell ===
1114 -
1115 1115  (% class="box infomessage" %)
1116 1116  (((
1117 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
823 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1118 1118  )))
1119 1119  
826 +[[image:image-20230602135658-1.png||height="545" width="986"]]
1120 1120  
1121 -=== Method 2: Flash a new image ===
828 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
1122 1122  
1123 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
830 +[[image:image-20230602135825-2.png||height="356" width="855"]]
1124 1124  
832 +The default account for chirpstack is: **admin/admin**
1125 1125  
1126 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
1127 1127  
835 += 10. Trouble Shooting =
1128 1128  
1129 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
837 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1130 1130  
1131 -[[image:image-20230719100239-1.png||height="724" width="994"]]
1132 1132  
1133 -
1134 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
1135 -
1136 -[[image:image-20230719100332-2.png]]
1137 -
1138 -
1139 -3. Disable the auto-update:
1140 -
1141 -[[image:image-20230719100419-3.png||height="458" width="995"]]
1142 -
1143 -
1144 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
1145 -
1146 -
1147 -By default, the LPS8v2's built-in server is ChirpStack v4,
1148 -
1149 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1150 -
1151 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
1152 -
1153 -
1154 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1155 -
1156 -
1157 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).5 (%%)How to check my USB port dev/tty after i plug in USB device. ==
1158 -
1159 -
1160 -When an external USB device is connected to LPS8v2, the user can access the Linux console of the LPS8v2 gateway and run the following command to check the USB port dev/tty:
1161 -
1162 -(% class="box infomessage" %)
1163 -(((
1164 -dmesg
1165 -)))
1166 -
1167 -[[image:image-20240803095144-1.png]]
1168 -
1169 -
1170 -
1171 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).6 DIN Mount Reference:(%%) ==
1172 -
1173 -
1174 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1175 -
1176 -[[image:image-20240318095617-2.png]]
1177 -
1178 -
1179 -
1180 -
1181 -= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12. Trouble Shooting(%%) =
1182 -
1183 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)12.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1184 -
1185 1185  [[image:image-20220920135918-1.png]]
1186 1186  
1187 1187  
... ... @@ -1197,7 +1197,7 @@
1197 1197  [[image:image-20220920141936-2.png]]
1198 1198  
1199 1199  
1200 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
855 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1201 1201  
1202 1202  
1203 1203  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -1205,13 +1205,13 @@
1205 1205  [[image:image-20230508171607-1.png]]
1206 1206  
1207 1207  
1208 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
863 +== 10.3  Fallback IP does not work, how can users check ==
1209 1209  
1210 1210  
1211 1211  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1212 1212  
1213 1213  
1214 -**~1. Check whether the configuration is correct**
869 +**1.Check whether the configuration is correct**
1215 1215  
1216 1216  Run the CMD command to ipconfig and ping 172.31.255.254.
1217 1217  
... ... @@ -1227,7 +1227,7 @@
1227 1227  If the firewall is not down, this will affect access to the gateway.
1228 1228  
1229 1229  
1230 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
885 +== 10.4  Click "Manual_Update", why there is no response? ==
1231 1231  
1232 1232  
1233 1233  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -1236,40 +1236,10 @@
1236 1236  [[image:image-20230527090555-3.png||height="660" width="832"]]
1237 1237  
1238 1238  
1239 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
894 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
1240 1240  
1241 1241  
1242 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1243 -
1244 -(% class="box infomessage" %)
1245 1245  (((
1246 -apt update && apt install *dragino*
1247 -
1248 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1249 -)))
1250 -
1251 -
1252 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1253 -
1254 -
1255 -**1) Build-in The Things Network**
1256 -
1257 -Refer to this link to delete the Built-in server's device.
1258 -
1259 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1260 -
1261 -
1262 -**2) Build-in Chirpstack**
1263 -
1264 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1265 -
1266 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1267 -
1268 -
1269 -= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)13. Supports(%%) =
1270 -
1271 -
1272 -(((
1273 1273  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1274 1274  )))
1275 1275  
... ... @@ -1277,7 +1277,7 @@
1277 1277  With your question as detailed as possible. We will reply and help you in the shortest.
1278 1278  
1279 1279  
1280 -= (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)14. Reference(%%) =
905 += 12. Reference =
1281 1281  
1282 1282  
1283 1283  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -1286,7 +1286,7 @@
1286 1286  
1287 1287  )))
1288 1288  
1289 -= (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)15. Order Info(%%) =
914 += 13. Order Info =
1290 1290  
1291 1291  
1292 1292  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1294,31 +1294,23 @@
1294 1294  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
1295 1295  
1296 1296  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1297 -
1298 1298  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1299 -
1300 1300  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1301 -
1302 1302  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1303 -
1304 1304  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1305 -
1306 1306  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1307 1307  
1308 1308  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
1309 1309  
1310 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
930 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
931 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
932 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
933 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1311 1311  
1312 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1313 -
1314 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1315 -
1316 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1317 -
1318 1318  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1319 1319  
1320 1320  
1321 -= (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)16. Manufacturer Info(%%) =
938 += 14. Manufacturer Info =
1322 1322  
1323 1323  
1324 1324  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1328,7 +1328,7 @@
1328 1328  LongCheng Street, LongGang District ; Shenzhen 518116,China
1329 1329  
1330 1330  
1331 -= (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)17. FCC Warning(%%) =
948 += 15. FCC Warning =
1332 1332  
1333 1333  
1334 1334  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -71.7 KB
Content
image-20240803095144-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.0 KB
Content
image-20240831151427-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
image-20240831152113-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0