Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 324.1 >
edited by Kilight Cao
on 2024/08/31 16:33
To version < 212.1 >
edited by Kilight Cao
on 2023/06/05 09:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
21 +== 1.1 What is LPS8v2 ==
22 22  
23 23  
24 24  (((
... ... @@ -81,12 +81,16 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
87 +== 1.4 Block Diagram ==
88 88  
89 89  
90 +
91 +== 1.5 LED Indicators ==
92 +
93 +
90 90  LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
... ... @@ -96,16 +96,16 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
107 + ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
107 107  
108 -== 1.5 Button Intruction ==
112 +== 1.6 Button Intruction ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -113,26 +113,14 @@
113 113  
114 114  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
120 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
123 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
125 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 136  = 2. Quick Start =
137 137  
138 138  
... ... @@ -141,9 +141,9 @@
141 141  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
142 142  
143 143  
144 -== 2.1 Access and Configure LPS8-V2 ==
136 +== 2.1 Connects to the network and accesses the gateway Web UI ==
145 145  
146 -=== 2.1.1 Find IP address of LPS8-V2 ===
138 +=== 2.1.1 connect the network ===
147 147  
148 148  
149 149  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -151,7 +151,7 @@
151 151  
152 152  Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
153 153  
154 -(% style="background-color:yellow" %)**dragino+dragino**
146 + (% style="background-color:yellow" %)**dragino+dragino**
155 155  
156 156  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
157 157  
... ... @@ -160,6 +160,7 @@
160 160  [[image:image-20230527085250-2.png||height="495" width="284"]]
161 161  
162 162  
155 +
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,6 +174,7 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
170 +
177 177  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
179 179  
... ... @@ -187,7 +187,7 @@
187 187  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
188 188  
189 189  
190 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
184 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
191 191  
192 192  
193 193  As in the below photo:
... ... @@ -197,7 +197,7 @@
197 197  
198 198  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
194 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 201  
202 202  
203 203  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -205,6 +205,7 @@
205 205  [[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
207 207  
202 +
208 208  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -244,7 +244,7 @@
244 244  
245 245  (% style="color:blue" %)**Password:   dragino**
246 246  
247 -[[image:image-20240318160845-1.png]]
242 +[[image:image-20230106153501-1.png||height="367" width="894"]]
248 248  
249 249  
250 250  == 2.2  Typical Network Setup ==
... ... @@ -307,12 +307,8 @@
307 307  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 308  
309 309  
310 -**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 -
312 -
313 313  === 2.2.5  Check Internet connection ===
314 314  
315 -
316 316  In the **home** page, we can check the Internet connection.
317 317  
318 318  * GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
... ... @@ -440,9 +440,8 @@
440 440  
441 441  === 3.4.1 Network ~-~-> WiFi ===
442 442  
443 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
444 444  
445 -[[image:image-20230619095946-1.png||height="332" width="827"]]
435 +[[image:image-20220616114756-4.png||height="251" width="669"]]
446 446  
447 447  
448 448  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -454,7 +454,7 @@
454 454  === 3.4.3 Network ~-~-> Network ===
455 455  
456 456  
457 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
447 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
458 458  
459 459  [[image:image-20230214093657-2.png||height="333" width="858"]]
460 460  
... ... @@ -462,7 +462,7 @@
462 462  === 3.4.4 Network ~-~-> Cellular ===
463 463  
464 464  
465 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
455 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
466 466  
467 467  (% style="color:red" %)**Note: APN cannot be empty.**
468 468  
... ... @@ -469,16 +469,11 @@
469 469  [[image:image-20230228115126-1.png]]
470 470  
471 471  
472 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
462 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
473 473  
474 474  [[image:image-20230228115535-2.png||height="478" width="888"]]
475 475  
476 476  
477 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
478 -
479 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
480 -
481 -
482 482  == 3.5 System ==
483 483  
484 484  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -486,13 +486,13 @@
486 486  
487 487  Shows the system info:
488 488  
489 -[[image:image-20231031162854-1.png]]
474 +[[image:image-20220917144512-5.png||height="618" width="853"]]
490 490  
491 491  
492 492  === 3.5.2 System ~-~-> System General ===
493 493  
494 494  
495 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
480 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
496 496  
497 497  In addition, Users can customize the FallBack IP address.
498 498  
... ... @@ -502,26 +502,12 @@
502 502  === 3.5.3 System ~-~-> Backup/Restore ===
503 503  
504 504  
505 -[[image:image-20231031162927-2.png]]
490 +[[image:image-20220917144725-6.png||height="208" width="869"]]
506 506  
507 -=== 3.5.4 System ~-~-> Reboot / Reset ===
508 508  
509 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
493 +=== 3.5.4 System ~-~-> Remoteit ===
510 510  
511 -ETH LED will SOLID BULE Until the restore is finished.
512 512  
513 -When the gateway restores the factory settings is complete,
514 -
515 -The WiFi configuration will enable WiFi Access Point by default.
516 -
517 -The other configuration will be restored to the default configuration.
518 -
519 -[[image:image-20240203172853-1.png||height="365" width="901"]]
520 -
521 -
522 -=== 3.5.5 System ~-~-> Remoteit ===
523 -
524 -
525 525  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
526 526  
527 527  
... ... @@ -530,7 +530,7 @@
530 530  [[image:image-20221230092303-2.png]]
531 531  
532 532  
533 -=== 3.5.6 System ~-~-> Package Management ===
504 +=== 3.5.5 System ~-~-> Package Management ===
534 534  
535 535  
536 536  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -538,114 +538,98 @@
538 538  [[image:image-20230214094316-4.png]]
539 539  
540 540  
541 -== 3.5 Logread ==
512 += 4. Build-in Server =
542 542  
543 -=== 3.5.1 LoRa Log ===
544 544  
515 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
545 545  
546 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
547 547  
548 -[[image:image-20240416112509-1.png]]
518 +[[image:image-20230214095318-5.png||height="347" width="980"]]
549 549  
550 550  
551 -=== 3.5.2 Gateway Traffic ===
521 +(% style="color:red" %)**Note:**
552 552  
553 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
523 + **Path**: System ~-~-> Built-in Server
554 554  
555 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
556 556  
526 +**Troubleshooting:**
557 557  
558 -=== 3.5.3 System Log ===
559 559  
560 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
529 +**~ 1. URL does not jump properly**
561 561  
562 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
531 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
563 563  
533 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
564 564  
565 -=== 3.5.4 Record Log ===
566 566  
567 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
536 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
568 568  
569 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
570 570  
539 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
571 571  
541 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
572 572  
573 -= 4. Build-in Server =
574 574  
575 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
544 +Login account:
576 576  
546 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
577 577  
578 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
548 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
579 579  
580 -[[image:image-20231106180816-4.png||height="416" width="896"]]
581 581  
582 -[[image:image-20231201165904-1.png||height="466" width="899"]]
551 +[[image:image-20220725171719-1.png||height="570" width="769"]]
583 583  
584 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
585 585  
586 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
554 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
587 587  
588 588  
557 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
589 589  
590 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
559 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
591 591  
561 +[[image:image-20230321092456-1.png]]
592 592  
593 -[[image:image-20230616175558-7.png||height="362" width="894"]]
594 594  
595 -[[image:image-20231201170355-2.png||height="536" width="899"]]
564 +== 4.2 Application Server ~-~- Node-Red ==
596 596  
597 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
598 598  
567 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
599 599  
600 600  
601 -== **3). Troubleshooting:** ==
570 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
602 602  
603 603  
604 -* (((
605 -=== ** If the URL does not jump properly.** ===
606 -)))
573 +[[image:image-20220725172124-3.png||height="610" width="843"]]
607 607  
608 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
609 609  
610 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
611 611  
577 +=== **Using Node-Red, InfluxDB and Grafana** ===
612 612  
613 -* (((
614 -=== ** How to install InfluxDB, Garfana.** ===
615 -)))
579 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
616 616  
617 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
618 618  
582 +the users can refer to this link to install them.
619 619  
620 -* (((
621 -=== ** How to upgrade the gateway node.js to the latest version.** ===
622 -)))
584 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
623 623  
624 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
625 625  
587 +=== **Upgrade the node.js** ===
626 626  
627 -* (((
628 -=== ** How to batch register device on the built-in Chirpstack network server** ===
629 -)))
589 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
630 630  
631 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
632 632  
592 +the users can refer to this link to upgrade them.
633 633  
634 -* (((
635 -=== ** Why my gateway is not Chirpstack?** ===
636 -)))
594 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
637 637  
638 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
639 639  
597 +== 4.3 How to disable the built-in server ==
640 640  
641 -* (((
642 -=== ** How to disable the built-in server** ===
643 -)))
644 644  
600 +Use the following commands to start and stop the TTNv3 service:
601 +
645 645  (% class="box infomessage" %)
646 646  (((
647 -Use the following commands to start and stop the TTNv3 service:**     **
648 -
649 649  **# start**
650 650  systemctl start ttnstack
651 651  
... ... @@ -659,10 +659,10 @@
659 659  systemctl disable ttnstack
660 660  )))
661 661  
662 -(% class="box infomessage" %)
663 -(((
664 664  Use the following commands to start and stop the Node-Red service:
665 665  
619 +(% class="box infomessage" %)
620 +(((
666 666  **# start**
667 667  systemctl start nodered
668 668  
... ... @@ -677,61 +677,40 @@
677 677  )))
678 678  
679 679  
680 -* (((
681 -=== ** How to choose the Chirpstack server frequency SubBand** ===
682 -)))
635 +== 4.4 How to use ChirpStack on LPS8-V2 ==
683 683  
684 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
685 685  
686 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
638 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
687 687  
688 -[[image:image-20230602140406-3.png||height="480" width="918"]]
640 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
689 689  
690 690  
691 -When the configuration is complete, click** "Save&Apply"**.
643 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
692 692  
693 693  
694 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
646 +On the Server ~-~-> Network Server interface, choose the frequency Plan first.
695 695  
696 -[[image:image-20230602143122-4.png||height="511" width="983"]]
648 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
697 697  
650 +[[image:image-20230602140406-3.png||height="480" width="918"]]
698 698  
699 -= 5. MQTT Forwarder =
700 700  
653 +When the configuration is complete, click "Save&Apply".
701 701  
702 -In the latest version, MQTT Forwarder functionality has been added to the LPS8V2 gateway by default
655 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
703 703  
704 -Users can configure the MQTT Forwarder on the **Forwarder~-~->MQTT** interface, and when the configuration is successful, it will forward the sensor data of the lorawan server chirpstack built in LPS8v2
657 +[[image:image-20230602143122-4.png||height="511" width="983"]]
705 705  
706 -For a detailed example of this feature, see this link:**[[MQTT Forward Instruction - DRAGINO>>http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/#H3.3A0UseLoRaWANProtocolforcommunication--ForLPS8V2]]**
659 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
707 707  
708 -(% class="wikigeneratedid" %)
709 -[[image:image-20240831152113-2.png]]
710 710  
711 711  
712 -= 6. Watch Dog =
663 += 6. How users can access LPS8-V2 using serial USB =
713 713  
714 714  
715 -The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
716 -
717 -
718 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
719 -
720 -The uses can be via the below method to enable Watch Dog:
721 -
722 -(% class="box infomessage" %)
723 -(((
724 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
725 -)))
726 -
727 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
728 -
729 -
730 -= 7. How users can access LPS8-V2 using serial USB =
731 -
732 -
733 733  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
734 734  
668 +
735 735  Port 1 of the UART on the LPS8-V2 is GND
736 736  
737 737  (% class="box infomessage" %)
... ... @@ -743,8 +743,10 @@
743 743  **GND <~-~--> GND (Black line)**
744 744  )))
745 745  
680 +
746 746  **LPS8v2 UART connection photo**
747 747  
683 +
748 748  [[image:image-20230421094319-2.png||height="351" width="392"]]
749 749  
750 750  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -756,329 +756,120 @@
756 756  [[image:image-20220804164747-2.png||height="622" width="594"]]
757 757  
758 758  
759 -= 8. OTA System Update =
695 += 7. Use the helium gateway-rs as the Data-only Hotspot =
760 760  
761 761  
762 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
698 +== **Step 1: Configure Frequency Band** ==
763 763  
764 764  
765 -== 8.1 Auto-update method ==
701 +//Each country has a requirement for frequency region. Choose the right one for your area.//
766 766  
703 +[[image:image-20220905164308-1.png]]
767 767  
768 -The default, each gateway will enable the auto-update function.
769 769  
770 -this function will be triggered every boot and every midnight.
771 771  
707 +== **Step 2: Configure the forward address** ==
772 772  
773 -Users can enable/disable it via Web Page
774 774  
775 -[[image:image-20230607094447-2.png]]
710 +**Select one of the servers to configure.**
776 776  
712 +**For example:**
777 777  
778 -== 8.2 Manual upgrade method ==
714 +[[image:image-20220905164847-2.png]]
779 779  
780 780  
781 -1). Using the Linux command to upgrade the system
782 782  
783 -(% class="box infomessage" %)
784 -(((
785 -**apt update && apt install *dragino***
786 -)))
718 +== **Step 3: Download and Install the Helium-gateway-rs** ==
787 787  
788 788  
789 -2). Upgrade the system via the Web page button of "Manual Update"
721 +**Access the gateway CLI via SSH.**
790 790  
791 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
723 +[[image:image-20230425153417-2.png]]
792 792  
793 -[[image:image-20230607093849-1.png]]
794 794  
726 +**Install the new gateway-rs**
795 795  
796 -= (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)9 How do I view gateway logs(%%) =
797 -
798 -=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)9.1 LoRaWAN Log:(%%) ===
799 -
800 -
801 -==== Semtech UDP Log : ====
802 -
803 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
804 -
805 -[[image:image-20231017112115-2.png||height="611" width="821"]]
806 -
807 -
808 -==== Station Log: ====
809 -
810 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
811 -
812 -[[image:image-20231017111606-1.png||height="622" width="821"]]
813 -
814 -
815 -=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)9.2  4G Log(%%) ===
816 -
817 -
818 -User needs to access the Linux console of the gateway and enter the following command:
819 -
820 820  (% class="box infomessage" %)
821 821  (((
822 -cat /var/log/qmilog.txt
730 +**apt update && apt install helium-gateway**
823 823  )))
824 824  
825 -[[image:image-20231017114417-3.png||height="543" width="679"]]
733 +[[image:image-20230425154058-4.png]]
826 826  
827 827  
828 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
829 829  
830 -Below are some commands as reference:
737 +Option: If you installed the older gateway-rs, you have clean it
831 831  
832 ->Usage:  /usr/bin/quectel-CM [options]
833 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
834 -> -p pincode Verify sim card pin if sim card is locked
835 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
836 -> -f logfilename Save log message of this program to file
837 -> -u usbmonlog filename  Save usbmon log to file
838 -> -i interface Specify which network interface to setup data call when multi-modems exits
839 -> -4 Setup IPv4 data call (default)
840 -> -6 Setup IPv6 data call
841 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
842 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
843 -> -b Enable network interface bridge function (default 0)
844 -> -v Verbose log mode, for debug purpose.[Examples]
845 ->Example 1: /usr/bin/quectel-CM
846 ->Example 2: /usr/bin/quectel-CM -s 3gnet
847 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
848 -
849 -
850 -
851 -=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)9.3 Dmesg Log(%%) ===
852 -
853 -
854 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
855 -
856 -[[image:image-20231017115330-5.png||height="565" width="740"]]
857 -
858 -
859 -=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)9.4 Record Log(%%) ===
860 -
861 -
862 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
863 -
864 -[[image:image-20231017115124-4.png||height="215" width="880"]]
865 -
866 -
867 -=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)9.5 View gateway logs via Linux Command(%%) ===
868 -
869 -
870 -**Semtech UDP Log :**
871 -
872 872  (% class="box infomessage" %)
873 873  (((
874 -**journalctl -u draginofwd -f**
741 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
875 875  )))
876 876  
877 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
744 +[[image:image-20230425153823-3.png]]
878 878  
879 879  
880 -**Station Log:**
747 +**Change the region setting:**
881 881  
882 -(% class="box infomessage" %)
883 -(((
884 -**tail -f /var/log/station.log **
885 -)))
886 886  
887 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
888 -
889 -
890 -**Dmesg Log:**
891 -
892 892  (% class="box infomessage" %)
893 893  (((
894 -**dmesg**
895 -)))
752 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
896 896  
897 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
898 898  
755 +**e.g: **
899 899  
757 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
900 900  
901 -(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
902 -= (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)10. More Services(%%) =
903 -
904 -== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)10.1 NTP Service/Time Synchronization(%%) ==
905 -
906 -The gateway time sync service is provided by chrony service
907 -
908 -
909 -=== 1). Modify the NTP server address: ===
910 -
911 -(% class="box infomessage" %)
912 -(((
913 -Configuration file path:  /etc/chrony/chrony.conf
759 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
914 914  )))
915 915  
916 916  
917 -=== 2). Start/Stop/Enable/Disable NTP service: ===
763 +**Restart the gateway-rs**
918 918  
919 919  (% class="box infomessage" %)
920 920  (((
921 -systemctl start chrony
922 -\\systemctl stop chrony
923 -\\systemctl disable chrony
924 -\\systemctl enable chrony
767 +**systemctl restart helium_gateway**
925 925  )))
926 926  
770 +[[image:image-20230425155612-7.png||height="265" width="911"]]
927 927  
928 -(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
929 -= (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)11. More features(%%) =
930 930  
931 -(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
932 -== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)11.1 Chirpstack MQTT Forwarder(%%) ==
933 933  
774 +**Check the helium_gateway running status**
934 934  
935 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
936 936  
937 -
938 -(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
939 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)11(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
940 -
941 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
942 -
943 -(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
944 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
945 -
946 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
947 -* Configure the following settings:
948 -** **Service Provider:** //Custom / Private LoRaWAN//
949 -** **Server Address:** localhost
950 -** **Uplink Port:** 1700
951 -** **Downlink Port:** 1700
952 -* Click **Save & Apply**
953 -
954 -[[image:image-20240518145929-2.png||height="652" width="727"]]
955 -
956 -
957 -(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
958 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)11(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
959 -
960 -
961 -(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
962 -(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
963 -
964 -First you must login into the gateway using SSH:
965 -
966 -(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
777 +(% class="box infomessage" %)
967 967  (((
968 -ssh root@GATEWAY-IP-ADDRESS
779 +**systemctl status helium_gateway**
969 969  )))
970 970  
971 -(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
972 -The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
973 973  
783 +[[image:image-20230425154740-5.png]]
974 974  
975 -(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
976 -(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
977 977  
978 -(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
979 -Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
980 980  
981 -(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
982 -(((
983 -cd /tmp
984 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
985 -)))
787 +**Check the helium_gateway Log：**
986 986  
987 -
988 -(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
989 -(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
990 -
991 -Use the dpkg package-manager to install the downloaded package. Example:
992 -
993 -(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
789 +(% class="box infomessage" %)
994 994  (((
995 -dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
791 +**journalctl -u helium_gateway -f**
996 996  )))
997 997  
998 -[[image:image-20240518152148-4.png]]
999 999  
795 +[[image:image-20230425155659-8.png]]
1000 1000  
1001 -(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
1002 -**Configuration**
1003 1003  
1004 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
798 += 8. OTA System Update =
1005 1005  
1006 -(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
1007 -This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1008 1008  
801 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1009 1009  
1010 -**ChirpStack MQTT Forwarder Setting:**
1011 1011  
1012 -(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1013 -(((
1014 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
804 += 9. FAQ =
1015 1015  
1016 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1017 -)))
806 +== 9.1 How to change Hostname ==
1018 1018  
1019 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1020 1020  
1021 -
1022 -Use commands to modify configuration files:
1023 -
1024 -(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1025 -(((
1026 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1027 -)))
1028 -
1029 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1030 -
1031 -
1032 -**(Re)start and stop commands**
1033 -
1034 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1035 -
1036 -(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1037 -(((
1038 -# start
1039 -
1040 -(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1041 -systemctl start chirpstack-mqtt-forwarder
1042 -
1043 -# stop
1044 -
1045 -systemctl stop chirpstack-mqtt-forwarder
1046 -
1047 -# restart
1048 -
1049 -systemctl restart chirpstack-mqtt-forwarder
1050 -)))
1051 -
1052 -(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1053 -(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1054 -
1055 -
1056 -**Check result**
1057 -
1058 -(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1059 -Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
1060 -
1061 -[[image:image-20240518154223-5.png]]
1062 -
1063 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1064 -
1065 -
1066 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)11.2 As a Data-only hotspot connect the helium blockchain(%%) ==
1067 -
1068 -
1069 -(% class="box infomessage" %)
1070 -(((
1071 -(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1072 -apt update && apt install helium-gateway
1073 -)))
1074 -
1075 -
1076 -
1077 -= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)12. FAQ(%%) =
1078 -
1079 -== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)12.1 How to change Hostname(%%) ==
1080 -
1081 -
1082 1082  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
1083 1083  
1084 1084  (% class="box infomessage" %)
... ... @@ -1091,90 +1091,34 @@
1091 1091  After the configuration is complete, run "reboot" to restart the gateway.
1092 1092  
1093 1093  
1094 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)12(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
821 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
1095 1095  
1096 1096  
1097 1097  Migrate guide:
1098 1098  
1099 -To stabilize the completion of the migration, The users can migrate in one of the following ways
826 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
1100 1100  
1101 -**Method 1. Using the Linux shell, **
828 +2. Download migrate script and run it.
1102 1102  
1103 -**Method 2. Flash a new image with the Chirpstack**
1104 -
1105 -
1106 -=== Method 1: Using the Linux shell ===
1107 -
1108 1108  (% class="box infomessage" %)
1109 1109  (((
1110 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
832 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1111 1111  )))
1112 1112  
835 +[[image:image-20230602135658-1.png||height="545" width="986"]]
1113 1113  
1114 -=== Method 2: Flash a new image ===
837 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
1115 1115  
1116 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
839 +[[image:image-20230602135825-2.png||height="356" width="855"]]
1117 1117  
841 +The default account for chirpstack is: **admin/admin**
1118 1118  
1119 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)12(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
1120 1120  
844 += 10. Trouble Shooting =
1121 1121  
1122 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
846 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1123 1123  
1124 -[[image:image-20230719100239-1.png||height="724" width="994"]]
1125 1125  
1126 -
1127 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
1128 -
1129 -[[image:image-20230719100332-2.png]]
1130 -
1131 -
1132 -3. Disable the auto-update:
1133 -
1134 -[[image:image-20230719100419-3.png||height="458" width="995"]]
1135 -
1136 -
1137 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)12(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
1138 -
1139 -
1140 -By default, the LPS8v2's built-in server is ChirpStack v4,
1141 -
1142 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1143 -
1144 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
1145 -
1146 -
1147 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1148 -
1149 -
1150 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)12(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).5 (%%)How to check my USB port dev/tty after i plug in USB device. ==
1151 -
1152 -
1153 -When an external USB device is connected to LPS8v2, the user can access the Linux console of the LPS8v2 gateway and run the following command to check the USB port dev/tty:
1154 -
1155 -(% class="box infomessage" %)
1156 -(((
1157 -dmesg
1158 -)))
1159 -
1160 -[[image:image-20240803095144-1.png]]
1161 -
1162 -
1163 -
1164 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)12(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).6 DIN Mount Reference:(%%) ==
1165 -
1166 -
1167 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1168 -
1169 -[[image:image-20240318095617-2.png]]
1170 -
1171 -
1172 -
1173 -
1174 -= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)13. Trouble Shooting(%%) =
1175 -
1176 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)13.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1177 -
1178 1178  [[image:image-20220920135918-1.png]]
1179 1179  
1180 1180  
... ... @@ -1190,7 +1190,7 @@
1190 1190  [[image:image-20220920141936-2.png]]
1191 1191  
1192 1192  
1193 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)13(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
864 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1194 1194  
1195 1195  
1196 1196  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -1198,13 +1198,13 @@
1198 1198  [[image:image-20230508171607-1.png]]
1199 1199  
1200 1200  
1201 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)13(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
872 +== 10.3  Fallback IP does not work, how can users check ==
1202 1202  
1203 1203  
1204 1204  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1205 1205  
1206 1206  
1207 -**~1. Check whether the configuration is correct**
878 +**1.Check whether the configuration is correct**
1208 1208  
1209 1209  Run the CMD command to ipconfig and ping 172.31.255.254.
1210 1210  
... ... @@ -1220,7 +1220,7 @@
1220 1220  If the firewall is not down, this will affect access to the gateway.
1221 1221  
1222 1222  
1223 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)13(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
894 +== 10.4  Click "Manual_Update", why there is no response? ==
1224 1224  
1225 1225  
1226 1226  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -1229,40 +1229,10 @@
1229 1229  [[image:image-20230527090555-3.png||height="660" width="832"]]
1230 1230  
1231 1231  
1232 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)13(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
903 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
1233 1233  
1234 1234  
1235 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1236 -
1237 -(% class="box infomessage" %)
1238 1238  (((
1239 -apt update && apt install *dragino*
1240 -
1241 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1242 -)))
1243 -
1244 -
1245 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)13(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1246 -
1247 -
1248 -**1) Build-in The Things Network**
1249 -
1250 -Refer to this link to delete the Built-in server's device.
1251 -
1252 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1253 -
1254 -
1255 -**2) Build-in Chirpstack**
1256 -
1257 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1258 -
1259 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1260 -
1261 -
1262 -= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)14. Supports(%%) =
1263 -
1264 -
1265 -(((
1266 1266  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1267 1267  )))
1268 1268  
... ... @@ -1270,7 +1270,7 @@
1270 1270  With your question as detailed as possible. We will reply and help you in the shortest.
1271 1271  
1272 1272  
1273 -= (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)15. Reference(%%) =
914 += 12. Reference =
1274 1274  
1275 1275  
1276 1276  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -1279,7 +1279,7 @@
1279 1279  
1280 1280  )))
1281 1281  
1282 -= (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)16. Order Info(%%) =
923 += 13. Order Info =
1283 1283  
1284 1284  
1285 1285  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1287,31 +1287,23 @@
1287 1287  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
1288 1288  
1289 1289  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1290 -
1291 1291  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1292 -
1293 1293  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1294 -
1295 1295  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1296 -
1297 1297  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1298 -
1299 1299  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1300 1300  
1301 1301  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
1302 1302  
1303 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
939 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
940 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
941 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
942 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1304 1304  
1305 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1306 -
1307 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1308 -
1309 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1310 -
1311 1311  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1312 1312  
1313 1313  
1314 -= (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)17. Manufacturer Info(%%) =
947 += 14. Manufacturer Info =
1315 1315  
1316 1316  
1317 1317  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1321,7 +1321,7 @@
1321 1321  LongCheng Street, LongGang District ; Shenzhen 518116,China
1322 1322  
1323 1323  
1324 -= (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)18. FCC Warning(%%) =
957 += 15. FCC Warning =
1325 1325  
1326 1326  
1327 1327  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -71.7 KB
Content
image-20240803095144-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.0 KB
Content
image-20240831151427-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
image-20240831152113-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0