Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 323.1 >
edited by Kilight Cao
on 2024/08/31 15:22
To version < 233.1 >
edited by Xiaoye
on 2023/07/19 10:04
>
Change comment: Uploaded new attachment "image-20230719100419-3.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
21 +== 1.1 What is LPS8v2 ==
22 22  
23 23  
24 24  (((
... ... @@ -81,7 +81,7 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 87  == 1.4 LED Indicators ==
... ... @@ -96,11 +96,11 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
... ... @@ -121,18 +121,6 @@
121 121   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 136  = 2. Quick Start =
137 137  
138 138  
... ... @@ -160,6 +160,7 @@
160 160  [[image:image-20230527085250-2.png||height="495" width="284"]]
161 161  
162 162  
151 +
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,6 +174,7 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
166 +
177 177  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
179 179  
... ... @@ -197,7 +197,7 @@
197 197  
198 198  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
190 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 201  
202 202  
203 203  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -205,6 +205,7 @@
205 205  [[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
207 207  
198 +
208 208  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -244,7 +244,7 @@
244 244  
245 245  (% style="color:blue" %)**Password:   dragino**
246 246  
247 -[[image:image-20240318160845-1.png]]
238 +[[image:image-20230106153501-1.png||height="367" width="894"]]
248 248  
249 249  
250 250  == 2.2  Typical Network Setup ==
... ... @@ -307,9 +307,6 @@
307 307  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 308  
309 309  
310 -**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 -
312 -
313 313  === 2.2.5  Check Internet connection ===
314 314  
315 315  
... ... @@ -469,16 +469,11 @@
469 469  [[image:image-20230228115126-1.png]]
470 470  
471 471  
472 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
460 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
473 473  
474 474  [[image:image-20230228115535-2.png||height="478" width="888"]]
475 475  
476 476  
477 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
478 -
479 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
480 -
481 -
482 482  == 3.5 System ==
483 483  
484 484  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -486,7 +486,7 @@
486 486  
487 487  Shows the system info:
488 488  
489 -[[image:image-20231031162854-1.png]]
472 +[[image:image-20220917144512-5.png||height="618" width="853"]]
490 490  
491 491  
492 492  === 3.5.2 System ~-~-> System General ===
... ... @@ -502,26 +502,12 @@
502 502  === 3.5.3 System ~-~-> Backup/Restore ===
503 503  
504 504  
505 -[[image:image-20231031162927-2.png]]
488 +[[image:image-20220917144725-6.png||height="208" width="869"]]
506 506  
507 -=== 3.5.4 System ~-~-> Reboot / Reset ===
508 508  
509 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
491 +=== 3.5.4 System ~-~-> Remoteit ===
510 510  
511 -ETH LED will SOLID BULE Until the restore is finished.
512 512  
513 -When the gateway restores the factory settings is complete,
514 -
515 -The WiFi configuration will enable WiFi Access Point by default.
516 -
517 -The other configuration will be restored to the default configuration.
518 -
519 -[[image:image-20240203172853-1.png||height="365" width="901"]]
520 -
521 -
522 -=== 3.5.5 System ~-~-> Remoteit ===
523 -
524 -
525 525  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
526 526  
527 527  
... ... @@ -530,7 +530,7 @@
530 530  [[image:image-20221230092303-2.png]]
531 531  
532 532  
533 -=== 3.5.6 System ~-~-> Package Management ===
502 +=== 3.5.5 System ~-~-> Package Management ===
534 534  
535 535  
536 536  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -538,114 +538,103 @@
538 538  [[image:image-20230214094316-4.png]]
539 539  
540 540  
541 -== 3.5 Logread ==
510 += 4. Build-in Server =
542 542  
543 -=== 3.5.1 LoRa Log ===
544 544  
513 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
545 545  
546 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
515 +[[image:image-20230616175617-8.png||height="390" width="894"]]
547 547  
548 -[[image:image-20240416112509-1.png]]
517 +[[image:image-20230616175558-7.png||height="362" width="894"]]
549 549  
550 550  
551 -=== 3.5.2 Gateway Traffic ===
552 552  
553 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
521 +(% style="color:red" %)**Note:**
554 554  
555 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
523 + **Path**: Server ~-~-> Network Server
556 556  
525 + Server ~-~-> Application Server
557 557  
558 -=== 3.5.3 System Log ===
559 559  
560 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
528 +**Troubleshooting:**
561 561  
562 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
563 563  
531 +**~ 1. URL does not jump properly**
564 564  
565 -=== 3.5.4 Record Log ===
533 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
566 566  
567 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
535 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
568 568  
569 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
570 570  
538 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
571 571  
572 572  
573 -= 4. Build-in Server =
541 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
574 574  
575 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
543 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
576 576  
577 577  
578 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
546 +Login account:
579 579  
580 -[[image:image-20231106180816-4.png||height="416" width="896"]]
548 +**Username : ** (% style="background-color:yellow" %)**admin**
581 581  
582 -[[image:image-20231201165904-1.png||height="466" width="899"]]
550 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
583 583  
584 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
552 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
585 585  
586 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
587 587  
588 588  
556 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
589 589  
590 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
591 591  
559 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
592 592  
593 -[[image:image-20230616175558-7.png||height="362" width="894"]]
561 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
594 594  
595 -[[image:image-20231201170355-2.png||height="536" width="899"]]
563 +[[image:image-20230321092456-1.png]]
596 596  
597 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
598 598  
599 599  
567 +== 4.2 Application Server ~-~- Node-Red ==
600 600  
601 -== **3). Troubleshooting:** ==
602 602  
570 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
603 603  
604 -* (((
605 -=== ** If the URL does not jump properly.** ===
606 -)))
607 607  
608 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
573 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
609 609  
610 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
611 611  
576 +[[image:image-20220725172124-3.png||height="610" width="843"]]
612 612  
613 -* (((
614 -=== ** How to install InfluxDB, Garfana.** ===
615 -)))
616 616  
617 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
618 618  
580 +=== **Using Node-Red, InfluxDB and Grafana** ===
619 619  
620 -* (((
621 -=== ** How to upgrade the gateway node.js to the latest version.** ===
622 -)))
582 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
623 623  
624 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
625 625  
585 +the users can refer to this link to install them.
626 626  
627 -* (((
628 -=== ** How to batch register device on the built-in Chirpstack network server** ===
629 -)))
587 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
630 630  
631 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
632 632  
590 +=== **Upgrade the node.js** ===
633 633  
634 -* (((
635 -=== ** Why my gateway is not Chirpstack?** ===
636 -)))
592 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
637 637  
638 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
639 639  
595 +the users can refer to this link to upgrade them.
640 640  
641 -* (((
642 -=== ** How to disable the built-in server** ===
643 -)))
597 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
644 644  
599 +
600 +== 4.3 How to disable the built-in server ==
601 +
602 +
603 +Use the following commands to start and stop the TTNv3 service:
604 +
645 645  (% class="box infomessage" %)
646 646  (((
647 -Use the following commands to start and stop the TTNv3 service:**     **
648 -
649 649  **# start**
650 650  systemctl start ttnstack
651 651  
... ... @@ -659,10 +659,10 @@
659 659  systemctl disable ttnstack
660 660  )))
661 661  
662 -(% class="box infomessage" %)
663 -(((
664 664  Use the following commands to start and stop the Node-Red service:
665 665  
622 +(% class="box infomessage" %)
623 +(((
666 666  **# start**
667 667  systemctl start nodered
668 668  
... ... @@ -677,59 +677,42 @@
677 677  )))
678 678  
679 679  
680 -* (((
681 -=== ** How to choose the Chirpstack server frequency SubBand** ===
682 -)))
638 +== 4.4 How to use ChirpStack on LPS8-V2 ==
683 683  
684 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
685 685  
686 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
641 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
687 687  
688 -[[image:image-20230602140406-3.png||height="480" width="918"]]
643 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
689 689  
690 690  
691 -When the configuration is complete, click** "Save&Apply"**.
646 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
692 692  
693 693  
694 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
649 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
695 695  
696 -[[image:image-20230602143122-4.png||height="511" width="983"]]
651 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
697 697  
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
698 698  
699 -= 5. MQTT Forwarder =
700 700  
656 +When the configuration is complete, click** "Save&Apply"**.
701 701  
702 -In the latest version, MQTT Forwarder functionality has been added to the LPS8V2 gateway by default
703 703  
704 -Users can configure the MQTT Forwarder on the **Forwarder~-~->MQTT** interface, and when the configuration is successful, it will forward the sensor data of the lorawan server chirpstack built in LPS8v2
659 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
705 705  
706 -(% class="wikigeneratedid" %)
707 -[[image:image-20240831152113-2.png]]
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
708 708  
709 709  
710 -= 6. Watch Dog =
664 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
711 711  
712 712  
713 -The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
714 714  
668 += 6. How users can access LPS8-V2 using serial USB =
715 715  
716 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
717 717  
718 -The uses can be via the below method to enable Watch Dog:
719 -
720 -(% class="box infomessage" %)
721 -(((
722 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
723 -)))
724 -
725 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
726 -
727 -
728 -= 7. How users can access LPS8-V2 using serial USB =
729 -
730 -
731 731  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
732 732  
673 +
733 733  Port 1 of the UART on the LPS8-V2 is GND
734 734  
735 735  (% class="box infomessage" %)
... ... @@ -741,8 +741,10 @@
741 741  **GND <~-~--> GND (Black line)**
742 742  )))
743 743  
685 +
744 744  **LPS8v2 UART connection photo**
745 745  
688 +
746 746  [[image:image-20230421094319-2.png||height="351" width="392"]]
747 747  
748 748  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -754,13 +754,13 @@
754 754  [[image:image-20220804164747-2.png||height="622" width="594"]]
755 755  
756 756  
757 -= 8. OTA System Update =
700 += 7. OTA System Update =
758 758  
759 759  
760 760  LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
761 761  
762 762  
763 -== 8.1 Auto-update method ==
706 +== 7.1 Auto-update method ==
764 764  
765 765  
766 766  The default, each gateway will enable the auto-update function.
... ... @@ -773,11 +773,12 @@
773 773  [[image:image-20230607094447-2.png]]
774 774  
775 775  
776 -== 8.2 Manual upgrade method ==
719 +== 7.2 Manual upgrade method ==
777 777  
778 778  
779 779  1). Using the Linux command to upgrade the system
780 780  
724 +
781 781  (% class="box infomessage" %)
782 782  (((
783 783  **apt update && apt install *dragino***
... ... @@ -786,297 +786,17 @@
786 786  
787 787  2). Upgrade the system via the Web page button of "Manual Update"
788 788  
789 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
790 790  
734 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
735 +
791 791  [[image:image-20230607093849-1.png]]
792 792  
793 793  
794 -= (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)9 How do I view gateway logs(%%) =
739 += 8. FAQ =
795 795  
796 -=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)9.1 LoRaWAN Log:(%%) ===
741 +== 8.1 How to change Hostname ==
797 797  
798 798  
799 -==== Semtech UDP Log : ====
800 -
801 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
802 -
803 -[[image:image-20231017112115-2.png||height="611" width="821"]]
804 -
805 -
806 -==== Station Log: ====
807 -
808 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
809 -
810 -[[image:image-20231017111606-1.png||height="622" width="821"]]
811 -
812 -
813 -=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)9.2  4G Log(%%) ===
814 -
815 -
816 -User needs to access the Linux console of the gateway and enter the following command:
817 -
818 -(% class="box infomessage" %)
819 -(((
820 -cat /var/log/qmilog.txt
821 -)))
822 -
823 -[[image:image-20231017114417-3.png||height="543" width="679"]]
824 -
825 -
826 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
827 -
828 -Below are some commands as reference:
829 -
830 ->Usage:  /usr/bin/quectel-CM [options]
831 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
832 -> -p pincode Verify sim card pin if sim card is locked
833 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
834 -> -f logfilename Save log message of this program to file
835 -> -u usbmonlog filename  Save usbmon log to file
836 -> -i interface Specify which network interface to setup data call when multi-modems exits
837 -> -4 Setup IPv4 data call (default)
838 -> -6 Setup IPv6 data call
839 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
840 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
841 -> -b Enable network interface bridge function (default 0)
842 -> -v Verbose log mode, for debug purpose.[Examples]
843 ->Example 1: /usr/bin/quectel-CM
844 ->Example 2: /usr/bin/quectel-CM -s 3gnet
845 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
846 -
847 -
848 -
849 -=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)9.3 Dmesg Log(%%) ===
850 -
851 -
852 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
853 -
854 -[[image:image-20231017115330-5.png||height="565" width="740"]]
855 -
856 -
857 -=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)9.4 Record Log(%%) ===
858 -
859 -
860 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
861 -
862 -[[image:image-20231017115124-4.png||height="215" width="880"]]
863 -
864 -
865 -=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)9.5 View gateway logs via Linux Command(%%) ===
866 -
867 -
868 -**Semtech UDP Log :**
869 -
870 -(% class="box infomessage" %)
871 -(((
872 -**journalctl -u draginofwd -f**
873 -)))
874 -
875 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
876 -
877 -
878 -**Station Log:**
879 -
880 -(% class="box infomessage" %)
881 -(((
882 -**tail -f /var/log/station.log **
883 -)))
884 -
885 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
886 -
887 -
888 -**Dmesg Log:**
889 -
890 -(% class="box infomessage" %)
891 -(((
892 -**dmesg**
893 -)))
894 -
895 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
896 -
897 -
898 -
899 -(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
900 -= (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)10. More Services(%%) =
901 -
902 -== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)10.1 NTP Service/Time Synchronization(%%) ==
903 -
904 -The gateway time sync service is provided by chrony service
905 -
906 -
907 -=== 1). Modify the NTP server address: ===
908 -
909 -(% class="box infomessage" %)
910 -(((
911 -Configuration file path:  /etc/chrony/chrony.conf
912 -)))
913 -
914 -
915 -=== 2). Start/Stop/Enable/Disable NTP service: ===
916 -
917 -(% class="box infomessage" %)
918 -(((
919 -systemctl start chrony
920 -\\systemctl stop chrony
921 -\\systemctl disable chrony
922 -\\systemctl enable chrony
923 -)))
924 -
925 -
926 -(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
927 -= (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)11. More features(%%) =
928 -
929 -(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
930 -== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)11.1 Chirpstack MQTT Forwarder(%%) ==
931 -
932 -
933 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
934 -
935 -
936 -(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
937 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)11(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
938 -
939 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
940 -
941 -(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
942 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
943 -
944 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
945 -* Configure the following settings:
946 -** **Service Provider:** //Custom / Private LoRaWAN//
947 -** **Server Address:** localhost
948 -** **Uplink Port:** 1700
949 -** **Downlink Port:** 1700
950 -* Click **Save & Apply**
951 -
952 -[[image:image-20240518145929-2.png||height="652" width="727"]]
953 -
954 -
955 -(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
956 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)11(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
957 -
958 -
959 -(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
960 -(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
961 -
962 -First you must login into the gateway using SSH:
963 -
964 -(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
965 -(((
966 -ssh root@GATEWAY-IP-ADDRESS
967 -)))
968 -
969 -(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
970 -The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
971 -
972 -
973 -(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
974 -(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
975 -
976 -(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
977 -Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
978 -
979 -(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
980 -(((
981 -cd /tmp
982 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
983 -)))
984 -
985 -
986 -(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
987 -(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
988 -
989 -Use the dpkg package-manager to install the downloaded package. Example:
990 -
991 -(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
992 -(((
993 -dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
994 -)))
995 -
996 -[[image:image-20240518152148-4.png]]
997 -
998 -
999 -(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
1000 -**Configuration**
1001 -
1002 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
1003 -
1004 -(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
1005 -This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1006 -
1007 -
1008 -**ChirpStack MQTT Forwarder Setting:**
1009 -
1010 -(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1011 -(((
1012 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
1013 -
1014 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1015 -)))
1016 -
1017 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1018 -
1019 -
1020 -Use commands to modify configuration files:
1021 -
1022 -(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1023 -(((
1024 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1025 -)))
1026 -
1027 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1028 -
1029 -
1030 -**(Re)start and stop commands**
1031 -
1032 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1033 -
1034 -(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1035 -(((
1036 -# start
1037 -
1038 -(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1039 -systemctl start chirpstack-mqtt-forwarder
1040 -
1041 -# stop
1042 -
1043 -systemctl stop chirpstack-mqtt-forwarder
1044 -
1045 -# restart
1046 -
1047 -systemctl restart chirpstack-mqtt-forwarder
1048 -)))
1049 -
1050 -(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1051 -(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1052 -
1053 -
1054 -**Check result**
1055 -
1056 -(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1057 -Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
1058 -
1059 -[[image:image-20240518154223-5.png]]
1060 -
1061 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1062 -
1063 -
1064 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)11.2 As a Data-only hotspot connect the helium blockchain(%%) ==
1065 -
1066 -
1067 -(% class="box infomessage" %)
1068 -(((
1069 -(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1070 -apt update && apt install helium-gateway
1071 -)))
1072 -
1073 -
1074 -
1075 -= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)12. FAQ(%%) =
1076 -
1077 -== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)12.1 How to change Hostname(%%) ==
1078 -
1079 -
1080 1080  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
1081 1081  
1082 1082  (% class="box infomessage" %)
... ... @@ -1089,90 +1089,45 @@
1089 1089  After the configuration is complete, run "reboot" to restart the gateway.
1090 1090  
1091 1091  
1092 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)12(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
756 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
1093 1093  
1094 1094  
1095 1095  Migrate guide:
1096 1096  
1097 -To stabilize the completion of the migration, The users can migrate in one of the following ways
761 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
1098 1098  
1099 -**Method 1. Using the Linux shell, **
763 +**2. On the Server ~-~-> Network Server interface, click "Management"**
1100 1100  
1101 -**Method 2. Flash a new image with the Chirpstack**
765 +[[image:image-20230616162454-1.png]]
1102 1102  
1103 1103  
1104 -=== Method 1: Using the Linux shell ===
768 +**3. Click "Migrate-Chirpstack"**
1105 1105  
1106 -(% class="box infomessage" %)
1107 -(((
1108 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1109 -)))
770 +[[image:image-20230616162742-2.png]]
1110 1110  
1111 1111  
1112 -=== Method 2: Flash a new image ===
773 +**4. Strat Install **
1113 1113  
1114 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1115 1115  
776 +Click start Install and wait until the migration succeeds
1116 1116  
1117 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)12(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
778 +[[image:image-20230616162934-3.png]]
1118 1118  
1119 1119  
1120 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
781 +**5.Migration complete check result**
1121 1121  
1122 -[[image:image-20230719100239-1.png||height="724" width="994"]]
783 +[[image:image-20230616174526-4.png||height="706" width="983"]]
1123 1123  
1124 1124  
1125 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
786 +[[image:image-20230616180004-9.png]]
1126 1126  
1127 -[[image:image-20230719100332-2.png]]
1128 1128  
1129 1129  
1130 -3. Disable the auto-update:
790 += 9. Trouble Shooting =
1131 1131  
1132 -[[image:image-20230719100419-3.png||height="458" width="995"]]
792 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1133 1133  
1134 1134  
1135 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)12(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
1136 -
1137 -
1138 -By default, the LPS8v2's built-in server is ChirpStack v4,
1139 -
1140 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1141 -
1142 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
1143 -
1144 -
1145 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1146 -
1147 -
1148 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)12(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).5 (%%)How to check my USB port dev/tty after i plug in USB device. ==
1149 -
1150 -
1151 -When an external USB device is connected to LPS8v2, the user can access the Linux console of the LPS8v2 gateway and run the following command to check the USB port dev/tty:
1152 -
1153 -(% class="box infomessage" %)
1154 -(((
1155 -dmesg
1156 -)))
1157 -
1158 -[[image:image-20240803095144-1.png]]
1159 -
1160 -
1161 -
1162 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)12(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).6 DIN Mount Reference:(%%) ==
1163 -
1164 -
1165 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1166 -
1167 -[[image:image-20240318095617-2.png]]
1168 -
1169 -
1170 -
1171 -
1172 -= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)13. Trouble Shooting(%%) =
1173 -
1174 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)13.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1175 -
1176 1176  [[image:image-20220920135918-1.png]]
1177 1177  
1178 1178  
... ... @@ -1188,7 +1188,7 @@
1188 1188  [[image:image-20220920141936-2.png]]
1189 1189  
1190 1190  
1191 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)13(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
810 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1192 1192  
1193 1193  
1194 1194  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -1196,13 +1196,13 @@
1196 1196  [[image:image-20230508171607-1.png]]
1197 1197  
1198 1198  
1199 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)13(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
818 +== 9.3  Fallback IP does not work, how can users check ==
1200 1200  
1201 1201  
1202 1202  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1203 1203  
1204 1204  
1205 -**~1. Check whether the configuration is correct**
824 +**1.Check whether the configuration is correct**
1206 1206  
1207 1207  Run the CMD command to ipconfig and ping 172.31.255.254.
1208 1208  
... ... @@ -1218,7 +1218,7 @@
1218 1218  If the firewall is not down, this will affect access to the gateway.
1219 1219  
1220 1220  
1221 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)13(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
840 +== 9.4  Click "Manual_Update", why there is no response? ==
1222 1222  
1223 1223  
1224 1224  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -1227,40 +1227,10 @@
1227 1227  [[image:image-20230527090555-3.png||height="660" width="832"]]
1228 1228  
1229 1229  
1230 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)13(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
849 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1231 1231  
1232 1232  
1233 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1234 -
1235 -(% class="box infomessage" %)
1236 1236  (((
1237 -apt update && apt install *dragino*
1238 -
1239 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1240 -)))
1241 -
1242 -
1243 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)13(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1244 -
1245 -
1246 -**1) Build-in The Things Network**
1247 -
1248 -Refer to this link to delete the Built-in server's device.
1249 -
1250 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1251 -
1252 -
1253 -**2) Build-in Chirpstack**
1254 -
1255 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1256 -
1257 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1258 -
1259 -
1260 -= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)14. Supports(%%) =
1261 -
1262 -
1263 -(((
1264 1264  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1265 1265  )))
1266 1266  
... ... @@ -1268,7 +1268,7 @@
1268 1268  With your question as detailed as possible. We will reply and help you in the shortest.
1269 1269  
1270 1270  
1271 -= (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)15. Reference(%%) =
860 += 11. Reference =
1272 1272  
1273 1273  
1274 1274  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -1277,7 +1277,7 @@
1277 1277  
1278 1278  )))
1279 1279  
1280 -= (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)16. Order Info(%%) =
869 += 12. Order Info =
1281 1281  
1282 1282  
1283 1283  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1309,7 +1309,7 @@
1309 1309  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1310 1310  
1311 1311  
1312 -= (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)17. Manufacturer Info(%%) =
901 += 13. Manufacturer Info =
1313 1313  
1314 1314  
1315 1315  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1319,7 +1319,7 @@
1319 1319  LongCheng Street, LongGang District ; Shenzhen 518116,China
1320 1320  
1321 1321  
1322 -= (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)18. FCC Warning(%%) =
911 += 14. FCC Warning =
1323 1323  
1324 1324  
1325 1325  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -71.7 KB
Content
image-20240803095144-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.0 KB
Content
image-20240831151427-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
image-20240831152113-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0