Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 318.1 >
edited by Xiaoye
on 2024/07/18 10:55
To version < 224.1 >
edited by Kilight Cao
on 2023/06/16 18:00
>
Change comment: Uploaded new attachment "image-20230616180004-9.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
21 +== 1.1 What is LPS8v2 ==
22 22  
23 23  
24 24  (((
... ... @@ -66,6 +66,8 @@
66 66  * Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 +
70 +
69 69  == 1.3 Features ==
70 70  
71 71  
... ... @@ -81,9 +81,11 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
89 +
90 +
87 87  == 1.4 LED Indicators ==
88 88  
89 89  
... ... @@ -96,11 +96,11 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
107 + ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
... ... @@ -121,18 +121,6 @@
121 121   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 136  = 2. Quick Start =
137 137  
138 138  
... ... @@ -141,9 +141,9 @@
141 141  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
142 142  
143 143  
144 -== 2.1 Access and Configure LPS8-V2 ==
136 +== 2.1 Connects to the network and accesses the gateway Web UI ==
145 145  
146 -=== 2.1.1 Find IP address of LPS8-V2 ===
138 +=== 2.1.1 connect the network ===
147 147  
148 148  
149 149  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -160,6 +160,7 @@
160 160  [[image:image-20230527085250-2.png||height="495" width="284"]]
161 161  
162 162  
155 +
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,6 +174,7 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
170 +
177 177  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
179 179  
... ... @@ -197,7 +197,7 @@
197 197  
198 198  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
194 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 201  
202 202  
203 203  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -205,6 +205,7 @@
205 205  [[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
207 207  
202 +
208 208  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -244,7 +244,7 @@
244 244  
245 245  (% style="color:blue" %)**Password:   dragino**
246 246  
247 -[[image:image-20240318160845-1.png]]
242 +[[image:image-20230106153501-1.png||height="367" width="894"]]
248 248  
249 249  
250 250  == 2.2  Typical Network Setup ==
... ... @@ -260,6 +260,8 @@
260 260  
261 261  * **Cellular Mode**
262 262  
258 +
259 +
263 263  === 2.2.2  Use WAN port to access Internet ===
264 264  
265 265  
... ... @@ -307,9 +307,6 @@
307 307  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 308  
309 309  
310 -**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 -
312 -
313 313  === 2.2.5  Check Internet connection ===
314 314  
315 315  
... ... @@ -440,9 +440,8 @@
440 440  
441 441  === 3.4.1 Network ~-~-> WiFi ===
442 442  
443 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
444 444  
445 -[[image:image-20230619095946-1.png||height="332" width="827"]]
438 +[[image:image-20220616114756-4.png||height="251" width="669"]]
446 446  
447 447  
448 448  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -469,16 +469,11 @@
469 469  [[image:image-20230228115126-1.png]]
470 470  
471 471  
472 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
465 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
473 473  
474 474  [[image:image-20230228115535-2.png||height="478" width="888"]]
475 475  
476 476  
477 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
478 -
479 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
480 -
481 -
482 482  == 3.5 System ==
483 483  
484 484  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -486,7 +486,7 @@
486 486  
487 487  Shows the system info:
488 488  
489 -[[image:image-20231031162854-1.png]]
477 +[[image:image-20220917144512-5.png||height="618" width="853"]]
490 490  
491 491  
492 492  === 3.5.2 System ~-~-> System General ===
... ... @@ -502,26 +502,12 @@
502 502  === 3.5.3 System ~-~-> Backup/Restore ===
503 503  
504 504  
505 -[[image:image-20231031162927-2.png]]
493 +[[image:image-20220917144725-6.png||height="208" width="869"]]
506 506  
507 -=== 3.5.4 System ~-~-> Reboot / Reset ===
508 508  
509 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
496 +=== 3.5.4 System ~-~-> Remoteit ===
510 510  
511 -ETH LED will SOLID BULE Until the restore is finished.
512 512  
513 -When the gateway restores the factory settings is complete,
514 -
515 -The WiFi configuration will enable WiFi Access Point by default.
516 -
517 -The other configuration will be restored to the default configuration.
518 -
519 -[[image:image-20240203172853-1.png||height="365" width="901"]]
520 -
521 -
522 -=== 3.5.5 System ~-~-> Remoteit ===
523 -
524 -
525 525  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
526 526  
527 527  
... ... @@ -530,7 +530,7 @@
530 530  [[image:image-20221230092303-2.png]]
531 531  
532 532  
533 -=== 3.5.6 System ~-~-> Package Management ===
507 +=== 3.5.5 System ~-~-> Package Management ===
534 534  
535 535  
536 536  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -538,114 +538,98 @@
538 538  [[image:image-20230214094316-4.png]]
539 539  
540 540  
541 -== 3.5 Logread ==
515 += 4. Build-in Server =
542 542  
543 -=== 3.5.1 LoRa Log ===
544 544  
518 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
545 545  
546 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
547 547  
548 -[[image:image-20240416112509-1.png]]
521 +[[image:image-20230214095318-5.png||height="347" width="980"]]
549 549  
550 550  
551 -=== 3.5.2 Gateway Traffic ===
524 +(% style="color:red" %)**Note:**
552 552  
553 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
526 + **Path**: System ~-~-> Built-in Server
554 554  
555 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
556 556  
529 +**Troubleshooting:**
557 557  
558 -=== 3.5.3 System Log ===
559 559  
560 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
532 +**~ 1. URL does not jump properly**
561 561  
562 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
534 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
563 563  
536 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
564 564  
565 -=== 3.5.4 Record Log ===
566 566  
567 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
539 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
568 568  
569 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
570 570  
542 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
571 571  
544 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
572 572  
573 -= 4. Build-in Server =
574 574  
575 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
547 +Login account:
576 576  
549 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
577 577  
578 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
551 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
579 579  
580 -[[image:image-20231106180816-4.png||height="416" width="896"]]
581 581  
582 -[[image:image-20231201165904-1.png||height="466" width="899"]]
554 +[[image:image-20220725171719-1.png||height="570" width="769"]]
583 583  
584 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
585 585  
586 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
557 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
587 587  
588 588  
560 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
589 589  
590 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
562 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
591 591  
564 +[[image:image-20230321092456-1.png]]
592 592  
593 -[[image:image-20230616175558-7.png||height="362" width="894"]]
594 594  
595 -[[image:image-20231201170355-2.png||height="536" width="899"]]
567 +== 4.2 Application Server ~-~- Node-Red ==
596 596  
597 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
598 598  
570 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
599 599  
600 600  
601 -== **3). Troubleshooting:** ==
573 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
602 602  
603 603  
604 -* (((
605 -=== ** If the URL does not jump properly.** ===
606 -)))
576 +[[image:image-20220725172124-3.png||height="610" width="843"]]
607 607  
608 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
609 609  
610 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
611 611  
580 +=== **Using Node-Red, InfluxDB and Grafana** ===
612 612  
613 -* (((
614 -=== ** How to install InfluxDB, Garfana.** ===
615 -)))
582 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
616 616  
617 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
618 618  
585 +the users can refer to this link to install them.
619 619  
620 -* (((
621 -=== ** How to upgrade the gateway node.js to the latest version.** ===
622 -)))
587 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
623 623  
624 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
625 625  
590 +=== **Upgrade the node.js** ===
626 626  
627 -* (((
628 -=== ** How to batch register device on the built-in Chirpstack network server** ===
629 -)))
592 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
630 630  
631 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
632 632  
595 +the users can refer to this link to upgrade them.
633 633  
634 -* (((
635 -=== ** Why my gateway is not Chirpstack?** ===
636 -)))
597 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
637 637  
638 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
639 639  
600 +== 4.3 How to disable the built-in server ==
640 640  
641 -* (((
642 -=== ** How to disable the built-in server** ===
643 -)))
644 644  
603 +Use the following commands to start and stop the TTNv3 service:
604 +
645 645  (% class="box infomessage" %)
646 646  (((
647 -Use the following commands to start and stop the TTNv3 service:**     **
648 -
649 649  **# start**
650 650  systemctl start ttnstack
651 651  
... ... @@ -659,10 +659,10 @@
659 659  systemctl disable ttnstack
660 660  )))
661 661  
662 -(% class="box infomessage" %)
663 -(((
664 664  Use the following commands to start and stop the Node-Red service:
665 665  
622 +(% class="box infomessage" %)
623 +(((
666 666  **# start**
667 667  systemctl start nodered
668 668  
... ... @@ -677,41 +677,34 @@
677 677  )))
678 678  
679 679  
680 -* (((
681 -=== ** How to choose the Chirpstack server frequency SubBand** ===
682 -)))
638 +== 4.4 How to use ChirpStack on LPS8-V2 ==
683 683  
684 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
685 685  
686 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
641 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
687 687  
688 -[[image:image-20230602140406-3.png||height="480" width="918"]]
643 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
689 689  
690 690  
691 -When the configuration is complete, click** "Save&Apply"**.
646 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
692 692  
693 693  
694 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
649 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
695 695  
696 -[[image:image-20230602143122-4.png||height="511" width="983"]]
651 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
697 697  
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
698 698  
699 -= 5. Watch Dog =
700 700  
656 +When the configuration is complete, click** "Save&Apply"**.
701 701  
702 -The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
703 703  
659 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
704 704  
705 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
706 706  
707 -The uses can be via the below method to enable Watch Dog:
708 708  
709 -(% class="box infomessage" %)
710 -(((
711 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
712 -)))
664 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
713 713  
714 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
715 715  
716 716  
717 717  = 6. How users can access LPS8-V2 using serial USB =
... ... @@ -719,6 +719,7 @@
719 719  
720 720  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
721 721  
673 +
722 722  Port 1 of the UART on the LPS8-V2 is GND
723 723  
724 724  (% class="box infomessage" %)
... ... @@ -730,8 +730,10 @@
730 730  **GND <~-~--> GND (Black line)**
731 731  )))
732 732  
685 +
733 733  **LPS8v2 UART connection photo**
734 734  
688 +
735 735  [[image:image-20230421094319-2.png||height="351" width="392"]]
736 736  
737 737  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -743,329 +743,153 @@
743 743  [[image:image-20220804164747-2.png||height="622" width="594"]]
744 744  
745 745  
746 -= 7. OTA System Update =
700 += 7. Use the helium gateway-rs as the Data-only Hotspot =
747 747  
748 748  
749 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
703 +== **Step 1: Configure Frequency Band** ==
750 750  
751 751  
752 -== 7.1 Auto-update method ==
706 +//Each country has a requirement for frequency region. Choose the right one for your area.//
753 753  
708 +[[image:image-20220905164308-1.png]]
754 754  
755 -The default, each gateway will enable the auto-update function.
756 756  
757 -this function will be triggered every boot and every midnight.
758 758  
712 +== **Step 2: Configure the forward address** ==
759 759  
760 -Users can enable/disable it via Web Page
761 761  
762 -[[image:image-20230607094447-2.png]]
715 +**Select one of the servers to configure.**
763 763  
717 +**For example:**
764 764  
765 -== 7.2 Manual upgrade method ==
719 +[[image:image-20220905164847-2.png]]
766 766  
767 767  
768 -1). Using the Linux command to upgrade the system
769 769  
770 -(% class="box infomessage" %)
771 -(((
772 -**apt update && apt install *dragino***
773 -)))
723 +== **Step 3: Download and Install the Helium-gateway-rs** ==
774 774  
775 775  
776 -2). Upgrade the system via the Web page button of "Manual Update"
726 +**Access the gateway CLI via SSH.**
777 777  
778 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
728 +[[image:image-20230425153417-2.png]]
779 779  
780 -[[image:image-20230607093849-1.png]]
781 781  
731 +**Install the new gateway-rs**
782 782  
783 -= (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)8 How do I view gateway logs(%%) =
784 -
785 -=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)8.1 LoRaWAN Log:(%%) ===
786 -
787 -
788 -==== Semtech UDP Log : ====
789 -
790 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
791 -
792 -[[image:image-20231017112115-2.png||height="611" width="821"]]
793 -
794 -
795 -==== Station Log: ====
796 -
797 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
798 -
799 -[[image:image-20231017111606-1.png||height="622" width="821"]]
800 -
801 -
802 -=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)8.2  4G Log(%%) ===
803 -
804 -
805 -User needs to access the Linux console of the gateway and enter the following command:
806 -
807 807  (% class="box infomessage" %)
808 808  (((
809 -cat /var/log/qmilog.txt
735 +**apt update && apt install helium-gateway**
810 810  )))
811 811  
812 -[[image:image-20231017114417-3.png||height="543" width="679"]]
738 +[[image:image-20230425154058-4.png]]
813 813  
814 814  
815 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
816 816  
817 -Below are some commands as reference:
742 +Option: If you installed the older gateway-rs, you have clean it
818 818  
819 ->Usage:  /usr/bin/quectel-CM [options]
820 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
821 -> -p pincode Verify sim card pin if sim card is locked
822 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
823 -> -f logfilename Save log message of this program to file
824 -> -u usbmonlog filename  Save usbmon log to file
825 -> -i interface Specify which network interface to setup data call when multi-modems exits
826 -> -4 Setup IPv4 data call (default)
827 -> -6 Setup IPv6 data call
828 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
829 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
830 -> -b Enable network interface bridge function (default 0)
831 -> -v Verbose log mode, for debug purpose.[Examples]
832 ->Example 1: /usr/bin/quectel-CM
833 ->Example 2: /usr/bin/quectel-CM -s 3gnet
834 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
835 -
836 -
837 -
838 -=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)8.3 Dmesg Log(%%) ===
839 -
840 -
841 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
842 -
843 -[[image:image-20231017115330-5.png||height="565" width="740"]]
844 -
845 -
846 -=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)8.4 Record Log(%%) ===
847 -
848 -
849 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
850 -
851 -[[image:image-20231017115124-4.png||height="215" width="880"]]
852 -
853 -
854 -=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)8.5 View gateway logs via Linux Command(%%) ===
855 -
856 -
857 -**Semtech UDP Log :**
858 -
859 859  (% class="box infomessage" %)
860 860  (((
861 -**journalctl -u draginofwd -f**
746 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
862 862  )))
863 863  
864 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
749 +[[image:image-20230425153823-3.png]]
865 865  
866 866  
867 -**Station Log:**
752 +**Change the region setting:**
868 868  
869 -(% class="box infomessage" %)
870 -(((
871 -**tail -f /var/log/station.log **
872 -)))
873 873  
874 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
875 -
876 -
877 -**Dmesg Log:**
878 -
879 879  (% class="box infomessage" %)
880 880  (((
881 -**dmesg**
882 -)))
757 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
883 883  
884 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
885 885  
760 +**e.g: **
886 886  
762 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
887 887  
888 -(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
889 -= (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)9. More Services(%%) =
890 -
891 -== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)9.1 NTP Service/Time Synchronization(%%) ==
892 -
893 -The gateway time sync service is provided by chrony service
894 -
895 -
896 -=== 1). Modify the NTP server address: ===
897 -
898 -(% class="box infomessage" %)
899 -(((
900 -Configuration file path:  /etc/chrony/chrony.conf
764 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
901 901  )))
902 902  
903 903  
904 -=== 2). Start/Stop/Enable/Disable NTP service: ===
768 +**Restart the gateway-rs**
905 905  
906 906  (% class="box infomessage" %)
907 907  (((
908 -systemctl start chrony
909 -\\systemctl stop chrony
910 -\\systemctl disable chrony
911 -\\systemctl enable chrony
772 +**systemctl restart helium_gateway**
912 912  )))
913 913  
775 +[[image:image-20230425155612-7.png||height="265" width="911"]]
914 914  
915 -(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
916 -= (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10. More features(%%) =
917 917  
918 -(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
919 -== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)10.1 Chirpstack MQTT Forwarder(%%) ==
920 920  
779 +**Check the helium_gateway running status**
921 921  
922 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
923 923  
924 -
925 -(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
926 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
927 -
928 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
929 -
930 -(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
931 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
932 -
933 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
934 -* Configure the following settings:
935 -** **Service Provider:** //Custom / Private LoRaWAN//
936 -** **Server Address:** localhost
937 -** **Uplink Port:** 1700
938 -** **Downlink Port:** 1700
939 -* Click **Save & Apply**
940 -
941 -[[image:image-20240518145929-2.png||height="652" width="727"]]
942 -
943 -
944 -(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
945 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
946 -
947 -
948 -(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
949 -(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
950 -
951 -First you must login into the gateway using SSH:
952 -
953 -(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
782 +(% class="box infomessage" %)
954 954  (((
955 -ssh root@GATEWAY-IP-ADDRESS
784 +**systemctl status helium_gateway**
956 956  )))
957 957  
958 -(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
959 -The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
960 960  
788 +[[image:image-20230425154740-5.png]]
961 961  
962 -(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
963 -(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
964 964  
965 -(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
966 -Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
967 967  
968 -(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
969 -(((
970 -cd /tmp
971 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
972 -)))
792 +**Check the helium_gateway Log：**
973 973  
974 -
975 -(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
976 -(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
977 -
978 -Use the dpkg package-manager to install the downloaded package. Example:
979 -
980 -(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
794 +(% class="box infomessage" %)
981 981  (((
982 -dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
796 +**journalctl -u helium_gateway -f**
983 983  )))
984 984  
985 -[[image:image-20240518152148-4.png]]
986 986  
800 +[[image:image-20230425155659-8.png]]
987 987  
988 -(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
989 -**Configuration**
990 990  
991 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
803 += 8. OTA System Update =
992 992  
993 -(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
994 -This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
995 995  
806 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
996 996  
997 -**ChirpStack MQTT Forwarder Setting:**
998 998  
999 -(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1000 -(((
1001 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
809 +== 8.1 Auto-update method ==
1002 1002  
1003 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1004 -)))
1005 1005  
1006 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
812 +The default, each gateway will enable the auto-update function.
1007 1007  
814 +this function will be triggered every boot and every midnight.
1008 1008  
1009 -Use commands to modify configuration files:
1010 1010  
1011 -(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1012 -(((
1013 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1014 -)))
817 +Users can enable/disable it via Web Page
1015 1015  
1016 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
819 +[[image:image-20230607094447-2.png]]
1017 1017  
1018 1018  
1019 -**(Re)start and stop commands**
822 +== 8.2 Manual upgrade method ==
1020 1020  
1021 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1022 1022  
1023 -(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1024 -(((
1025 -# start
825 +1). Using the Linux command to upgrade the system
1026 1026  
1027 -(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1028 -systemctl start chirpstack-mqtt-forwarder
1029 1029  
1030 -# stop
1031 -
1032 -systemctl stop chirpstack-mqtt-forwarder
1033 -
1034 -# restart
1035 -
1036 -systemctl restart chirpstack-mqtt-forwarder
828 +(% class="box infomessage" %)
829 +(((
830 +**apt update && apt install *dragino***
1037 1037  )))
1038 1038  
1039 -(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1040 -(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1041 1041  
834 +2). Upgrade the system via the Web page button of "Manual Update"
1042 1042  
1043 -**Check result**
1044 1044  
1045 -(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1046 -Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
837 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
1047 1047  
1048 -[[image:image-20240518154223-5.png]]
839 +[[image:image-20230607093849-1.png]]
1049 1049  
1050 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1051 1051  
842 += 9. FAQ =
1052 1052  
1053 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.2 As a Data-only hotspot connect the helium blockchain(%%) ==
844 +== 9.1 How to change Hostname ==
1054 1054  
1055 1055  
1056 -(% class="box infomessage" %)
1057 -(((
1058 -(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1059 -apt update && apt install helium-gateway
1060 -)))
1061 -
1062 -
1063 -
1064 -= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11. FAQ(%%) =
1065 -
1066 -== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)11.1 How to change Hostname(%%) ==
1067 -
1068 -
1069 1069  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
1070 1070  
1071 1071  (% class="box infomessage" %)
... ... @@ -1078,76 +1078,35 @@
1078 1078  After the configuration is complete, run "reboot" to restart the gateway.
1079 1079  
1080 1080  
1081 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
859 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
1082 1082  
1083 1083  
1084 1084  Migrate guide:
1085 1085  
1086 -To stabilize the completion of the migration, The users can migrate in one of the following ways
864 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
1087 1087  
1088 -**Method 1. Using the Linux shell, **
866 +2. Download migrate script and run it.
1089 1089  
1090 -**Method 2. Flash a new image with the Chirpstack**
1091 -
1092 -
1093 -=== Method 1: Using the Linux shell ===
1094 -
1095 1095  (% class="box infomessage" %)
1096 1096  (((
1097 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
870 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1098 1098  )))
1099 1099  
873 +[[image:image-20230602135658-1.png||height="545" width="986"]]
1100 1100  
1101 -=== Method 2: Flash a new image ===
1102 1102  
1103 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
876 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
1104 1104  
878 +[[image:image-20230602135825-2.png||height="356" width="855"]]
1105 1105  
1106 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
880 +The default account for chirpstack is: **admin/admin**
1107 1107  
1108 1108  
1109 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
883 += 10. Trouble Shooting =
1110 1110  
1111 -[[image:image-20230719100239-1.png||height="724" width="994"]]
885 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1112 1112  
1113 1113  
1114 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
1115 -
1116 -[[image:image-20230719100332-2.png]]
1117 -
1118 -
1119 -3. Disable the auto-update:
1120 -
1121 -[[image:image-20230719100419-3.png||height="458" width="995"]]
1122 -
1123 -
1124 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
1125 -
1126 -
1127 -By default, the LPS8v2's built-in server is ChirpStack v4,
1128 -
1129 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1130 -
1131 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
1132 -
1133 -
1134 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1135 -
1136 -
1137 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).5 DIN Mount Reference:(%%) ==
1138 -
1139 -
1140 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1141 -
1142 -[[image:image-20240318095617-2.png]]
1143 -
1144 -
1145 -
1146 -
1147 -= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12. Trouble Shooting(%%) =
1148 -
1149 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)12.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1150 -
1151 1151  [[image:image-20220920135918-1.png]]
1152 1152  
1153 1153  
... ... @@ -1163,7 +1163,7 @@
1163 1163  [[image:image-20220920141936-2.png]]
1164 1164  
1165 1165  
1166 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
903 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1167 1167  
1168 1168  
1169 1169  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -1171,13 +1171,13 @@
1171 1171  [[image:image-20230508171607-1.png]]
1172 1172  
1173 1173  
1174 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
911 +== 10.3  Fallback IP does not work, how can users check ==
1175 1175  
1176 1176  
1177 1177  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1178 1178  
1179 1179  
1180 -**~1. Check whether the configuration is correct**
917 +**1.Check whether the configuration is correct**
1181 1181  
1182 1182  Run the CMD command to ipconfig and ping 172.31.255.254.
1183 1183  
... ... @@ -1193,7 +1193,7 @@
1193 1193  If the firewall is not down, this will affect access to the gateway.
1194 1194  
1195 1195  
1196 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
933 +== 10.4  Click "Manual_Update", why there is no response? ==
1197 1197  
1198 1198  
1199 1199  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -1202,40 +1202,10 @@
1202 1202  [[image:image-20230527090555-3.png||height="660" width="832"]]
1203 1203  
1204 1204  
1205 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
942 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
1206 1206  
1207 1207  
1208 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1209 -
1210 -(% class="box infomessage" %)
1211 1211  (((
1212 -apt update && apt install *dragino*
1213 -
1214 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1215 -)))
1216 -
1217 -
1218 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1219 -
1220 -
1221 -**1) Build-in The Things Network**
1222 -
1223 -Refer to this link to delete the Built-in server's device.
1224 -
1225 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1226 -
1227 -
1228 -**2) Build-in Chirpstack**
1229 -
1230 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1231 -
1232 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1233 -
1234 -
1235 -= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)13. Supports(%%) =
1236 -
1237 -
1238 -(((
1239 1239  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1240 1240  )))
1241 1241  
... ... @@ -1243,16 +1243,17 @@
1243 1243  With your question as detailed as possible. We will reply and help you in the shortest.
1244 1244  
1245 1245  
1246 -= (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)14. Reference(%%) =
953 += 12. Reference =
1247 1247  
1248 1248  
1249 1249  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
1250 1250  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
1251 1251  
959 +
1252 1252  
1253 1253  )))
1254 1254  
1255 -= (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)15. Order Info(%%) =
963 += 13. Order Info =
1256 1256  
1257 1257  
1258 1258  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1284,7 +1284,7 @@
1284 1284  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1285 1285  
1286 1286  
1287 -= (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)16. Manufacturer Info(%%) =
995 += 14. Manufacturer Info =
1288 1288  
1289 1289  
1290 1290  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1294,7 +1294,7 @@
1294 1294  LongCheng Street, LongGang District ; Shenzhen 518116,China
1295 1295  
1296 1296  
1297 -= (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)17. FCC Warning(%%) =
1005 += 15. FCC Warning =
1298 1298  
1299 1299  
1300 1300  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -71.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0