Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 317.1 >
edited by Xiaoye
on 2024/05/27 09:02
To version < 314.1 >
edited by Kilight Cao
on 2024/05/18 16:22
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -777,115 +777,10 @@
777 777  [[image:image-20230607093849-1.png]]
778 778  
779 779  
780 -= (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)8 How do I view gateway logs(%%) =
781 -
782 -=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)8.1 LoRaWAN Log:(%%) ===
783 -
784 -
785 -==== Semtech UDP Log : ====
786 -
787 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
788 -
789 -[[image:image-20231017112115-2.png||height="611" width="821"]]
790 -
791 -
792 -==== Station Log: ====
793 -
794 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
795 -
796 -[[image:image-20231017111606-1.png||height="622" width="821"]]
797 -
798 -
799 -=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)8.2  4G Log(%%) ===
800 -
801 -
802 -User needs to access the Linux console of the gateway and enter the following command:
803 -
804 -(% class="box infomessage" %)
805 -(((
806 -cat /var/log/qmilog.txt
807 -)))
808 -
809 -[[image:image-20231017114417-3.png||height="543" width="679"]]
810 -
811 -
812 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
813 -
814 -Below are some commands as reference:
815 -
816 ->Usage:  /usr/bin/quectel-CM [options]
817 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
818 -> -p pincode Verify sim card pin if sim card is locked
819 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
820 -> -f logfilename Save log message of this program to file
821 -> -u usbmonlog filename  Save usbmon log to file
822 -> -i interface Specify which network interface to setup data call when multi-modems exits
823 -> -4 Setup IPv4 data call (default)
824 -> -6 Setup IPv6 data call
825 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
826 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
827 -> -b Enable network interface bridge function (default 0)
828 -> -v Verbose log mode, for debug purpose.[Examples]
829 ->Example 1: /usr/bin/quectel-CM
830 ->Example 2: /usr/bin/quectel-CM -s 3gnet
831 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
832 -
833 -
834 -
835 -=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)8.3 Dmesg Log(%%) ===
836 -
837 -
838 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
839 -
840 -[[image:image-20231017115330-5.png||height="565" width="740"]]
841 -
842 -
843 -=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)8.4 Record Log(%%) ===
844 -
845 -
846 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
847 -
848 -[[image:image-20231017115124-4.png||height="215" width="880"]]
849 -
850 -
851 -=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)8.5 View gateway logs via Linux Command(%%) ===
852 -
853 -
854 -**Semtech UDP Log :**
855 -
856 -(% class="box infomessage" %)
857 -(((
858 -**journalctl -u draginofwd -f**
859 -)))
860 -
861 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
862 -
863 -
864 -**Station Log:**
865 -
866 -(% class="box infomessage" %)
867 -(((
868 -**tail -f /var/log/station.log **
869 -)))
870 -
871 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
872 -
873 -
874 -**Dmesg Log:**
875 -
876 -(% class="box infomessage" %)
877 -(((
878 -**dmesg**
879 -)))
880 -
881 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
882 -
883 -
884 -
885 885  (% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
886 -= (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)9. More Services(%%) =
781 += 8. More Services =
887 887  
888 -== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)9.1 NTP Service/Time Synchronization(%%) ==
783 +== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)8.1 NTP Service/Time Synchronization(%%) ==
889 889  
890 890  The gateway time sync service is provided by chrony service
891 891  
... ... @@ -909,11 +909,21 @@
909 909  )))
910 910  
911 911  
807 +== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)8.2 How to connect the helium blockchain as a Data-only hotspot(%%) ==
808 +
809 +
810 +(% class="box infomessage" %)
811 +(((
812 +(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
813 +apt update && apt install helium-gateway
814 +)))
815 +
816 +
912 912  (% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
913 -= (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10. More features(%%) =
818 += 9. More features =
914 914  
915 915  (% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
916 -== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)10.1 Chirpstack MQTT Forwarder(%%) ==
821 +== 9.1 How does the gateway connect to Chirpstack via MQTT Forwarder ==
917 917  
918 918  
919 919  ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
... ... @@ -920,7 +920,7 @@
920 920  
921 921  
922 922  (% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
923 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
828 +=== 9.1.1 Configure Packet Forwarder ===
924 924  
925 925  In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
926 926  
... ... @@ -939,8 +939,9 @@
939 939  
940 940  
941 941  (% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
942 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
847 +=== 9.1.2 Install ChirpStack MQTT Forwarder ===
943 943  
849 +==== ====
944 944  
945 945  (% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
946 946  (% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
... ... @@ -1047,22 +1047,11 @@
1047 1047  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1048 1048  
1049 1049  
1050 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.2 As a Data-only hotspot connect the helium blockchain(%%) ==
956 += (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10. FAQ(%%) =
1051 1051  
958 +== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)10.1 How to change Hostname(%%) ==
1052 1052  
1053 -(% class="box infomessage" %)
1054 -(((
1055 -(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1056 -apt update && apt install helium-gateway
1057 -)))
1058 1058  
1059 -
1060 -
1061 -= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11. FAQ(%%) =
1062 -
1063 -== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)11.1 How to change Hostname(%%) ==
1064 -
1065 -
1066 1066  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
1067 1067  
1068 1068  (% class="box infomessage" %)
... ... @@ -1075,7 +1075,7 @@
1075 1075  After the configuration is complete, run "reboot" to restart the gateway.
1076 1076  
1077 1077  
1078 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
973 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
1079 1079  
1080 1080  
1081 1081  Migrate guide:
... ... @@ -1100,7 +1100,7 @@
1100 1100  Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1101 1101  
1102 1102  
1103 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
998 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
1104 1104  
1105 1105  
1106 1106  1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
... ... @@ -1118,7 +1118,7 @@
1118 1118  [[image:image-20230719100419-3.png||height="458" width="995"]]
1119 1119  
1120 1120  
1121 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
1016 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
1122 1122  
1123 1123  
1124 1124  By default, the LPS8v2's built-in server is ChirpStack v4,
... ... @@ -1131,9 +1131,113 @@
1131 1131  Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1132 1132  
1133 1133  
1134 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).5 DIN Mount Reference:(%%) ==
1029 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %).6 How do I view gateway logs(%%) ==
1135 1135  
1031 +=== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %).6.1 LoRaWAN Log:(%%) ===
1136 1136  
1033 +
1034 +==== Semtech UDP Log : ====
1035 +
1036 +When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
1037 +
1038 +[[image:image-20231017112115-2.png||height="611" width="821"]]
1039 +
1040 +
1041 +==== Station Log: ====
1042 +
1043 +When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
1044 +
1045 +[[image:image-20231017111606-1.png||height="622" width="821"]]
1046 +
1047 +
1048 +=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)9.6.2  4G Log(%%) ===
1049 +
1050 +
1051 +User needs to access the Linux console of the gateway and enter the following command:
1052 +
1053 +(% class="box infomessage" %)
1054 +(((
1055 +cat /var/log/qmilog.txt
1056 +)))
1057 +
1058 +[[image:image-20231017114417-3.png||height="543" width="679"]]
1059 +
1060 +
1061 +LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
1062 +
1063 +Below are some commands as reference:
1064 +
1065 +>Usage:  /usr/bin/quectel-CM [options]
1066 +> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
1067 +> -p pincode Verify sim card pin if sim card is locked
1068 +> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
1069 +> -f logfilename Save log message of this program to file
1070 +> -u usbmonlog filename  Save usbmon log to file
1071 +> -i interface Specify which network interface to setup data call when multi-modems exits
1072 +> -4 Setup IPv4 data call (default)
1073 +> -6 Setup IPv6 data call
1074 +> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
1075 +> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
1076 +> -b Enable network interface bridge function (default 0)
1077 +> -v Verbose log mode, for debug purpose.[Examples]
1078 +>Example 1: /usr/bin/quectel-CM
1079 +>Example 2: /usr/bin/quectel-CM -s 3gnet
1080 +>Example 3: /usr/bin/quectel-CM -s 3gnet -v
1081 +
1082 +
1083 +
1084 +=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)9.6.3 Dmesg Log(%%) ===
1085 +
1086 +
1087 +Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
1088 +
1089 +[[image:image-20231017115330-5.png||height="565" width="740"]]
1090 +
1091 +
1092 +=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)9.6.4 Record Log(%%) ===
1093 +
1094 +
1095 +Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
1096 +
1097 +[[image:image-20231017115124-4.png||height="215" width="880"]]
1098 +
1099 +
1100 +=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)9.6.5 View gateway logs via Linux Command(%%) ===
1101 +
1102 +
1103 +**Semtech UDP Log :**
1104 +
1105 +(% class="box infomessage" %)
1106 +(((
1107 +**journalctl -u draginofwd -f**
1108 +)))
1109 +
1110 +[[image:image-20231207144627-1.png||height="371" width="1017"]]
1111 +
1112 +
1113 +**Station Log:**
1114 +
1115 +(% class="box infomessage" %)
1116 +(((
1117 +**tail -f /var/log/station.log **
1118 +)))
1119 +
1120 +[[image:image-20231207144758-2.png||height="132" width="1022"]]
1121 +
1122 +
1123 +**Dmesg Log:**
1124 +
1125 +(% class="box infomessage" %)
1126 +(((
1127 +**dmesg**
1128 +)))
1129 +
1130 +[[image:image-20231207145210-3.png||height="310" width="1021"]]
1131 +
1132 +
1133 +== (% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %)9.5 DIN Mount Reference:(%%) ==
1134 +
1135 +
1137 1137  [[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1138 1138  
1139 1139  [[image:image-20240318095617-2.png]]
... ... @@ -1141,9 +1141,9 @@
1141 1141  
1142 1142  
1143 1143  
1144 -= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12. Trouble Shooting(%%) =
1143 += (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)10. Trouble Shooting(%%) =
1145 1145  
1146 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)12.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1145 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1147 1147  
1148 1148  [[image:image-20220920135918-1.png]]
1149 1149  
... ... @@ -1160,7 +1160,7 @@
1160 1160  [[image:image-20220920141936-2.png]]
1161 1161  
1162 1162  
1163 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
1162 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
1164 1164  
1165 1165  
1166 1166  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -1168,7 +1168,7 @@
1168 1168  [[image:image-20230508171607-1.png]]
1169 1169  
1170 1170  
1171 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
1170 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
1172 1172  
1173 1173  
1174 1174  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
... ... @@ -1190,7 +1190,7 @@
1190 1190  If the firewall is not down, this will affect access to the gateway.
1191 1191  
1192 1192  
1193 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
1192 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
1194 1194  
1195 1195  
1196 1196  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -1199,7 +1199,7 @@
1199 1199  [[image:image-20230527090555-3.png||height="660" width="832"]]
1200 1200  
1201 1201  
1202 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
1201 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
1203 1203  
1204 1204  
1205 1205  Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
... ... @@ -1212,7 +1212,7 @@
1212 1212  )))
1213 1213  
1214 1214  
1215 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1214 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1216 1216  
1217 1217  
1218 1218  **1) Build-in The Things Network**
... ... @@ -1229,7 +1229,7 @@
1229 1229  [[image:image-20231106180846-5.png||height="310" width="668"]]
1230 1230  
1231 1231  
1232 -= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)13. Supports(%%) =
1231 += (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1233 1233  
1234 1234  
1235 1235  (((
... ... @@ -1240,7 +1240,7 @@
1240 1240  With your question as detailed as possible. We will reply and help you in the shortest.
1241 1241  
1242 1242  
1243 -= (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)14. Reference(%%) =
1242 += 11. Reference =
1244 1244  
1245 1245  
1246 1246  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -1249,7 +1249,7 @@
1249 1249  
1250 1250  )))
1251 1251  
1252 -= (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)15. Order Info(%%) =
1251 += 12. Order Info =
1253 1253  
1254 1254  
1255 1255  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1281,7 +1281,7 @@
1281 1281  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1282 1282  
1283 1283  
1284 -= (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)16. Manufacturer Info(%%) =
1283 += 13. Manufacturer Info =
1285 1285  
1286 1286  
1287 1287  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1291,7 +1291,7 @@
1291 1291  LongCheng Street, LongGang District ; Shenzhen 518116,China
1292 1292  
1293 1293  
1294 -= (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)17. FCC Warning(%%) =
1293 += 14. FCC Warning =
1295 1295  
1296 1296  
1297 1297  (((

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0