Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 314.1 >
edited by Kilight Cao
on 2024/05/18 16:22
To version < 224.1 >
edited by Kilight Cao
on 2023/06/16 18:00
>
Change comment: Uploaded new attachment "image-20230616180004-9.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
21 +== 1.1 What is LPS8v2 ==
22 22  
23 23  
24 24  (((
... ... @@ -66,6 +66,8 @@
66 66  * Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 +
70 +
69 69  == 1.3 Features ==
70 70  
71 71  
... ... @@ -81,9 +81,11 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
89 +
90 +
87 87  == 1.4 LED Indicators ==
88 88  
89 89  
... ... @@ -96,11 +96,11 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
107 + ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
... ... @@ -121,18 +121,6 @@
121 121   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 136  = 2. Quick Start =
137 137  
138 138  
... ... @@ -141,9 +141,9 @@
141 141  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
142 142  
143 143  
144 -== 2.1 Access and Configure LPS8-V2 ==
136 +== 2.1 Connects to the network and accesses the gateway Web UI ==
145 145  
146 -=== 2.1.1 Find IP address of LPS8-V2 ===
138 +=== 2.1.1 connect the network ===
147 147  
148 148  
149 149  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -160,6 +160,7 @@
160 160  [[image:image-20230527085250-2.png||height="495" width="284"]]
161 161  
162 162  
155 +
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,6 +174,7 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
170 +
177 177  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
179 179  
... ... @@ -197,7 +197,7 @@
197 197  
198 198  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
194 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 201  
202 202  
203 203  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -205,6 +205,7 @@
205 205  [[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
207 207  
202 +
208 208  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -244,7 +244,7 @@
244 244  
245 245  (% style="color:blue" %)**Password:   dragino**
246 246  
247 -[[image:image-20240318160845-1.png]]
242 +[[image:image-20230106153501-1.png||height="367" width="894"]]
248 248  
249 249  
250 250  == 2.2  Typical Network Setup ==
... ... @@ -260,6 +260,8 @@
260 260  
261 261  * **Cellular Mode**
262 262  
258 +
259 +
263 263  === 2.2.2  Use WAN port to access Internet ===
264 264  
265 265  
... ... @@ -307,9 +307,6 @@
307 307  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 308  
309 309  
310 -**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 -
312 -
313 313  === 2.2.5  Check Internet connection ===
314 314  
315 315  
... ... @@ -440,9 +440,8 @@
440 440  
441 441  === 3.4.1 Network ~-~-> WiFi ===
442 442  
443 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
444 444  
445 -[[image:image-20230619095946-1.png||height="332" width="827"]]
438 +[[image:image-20220616114756-4.png||height="251" width="669"]]
446 446  
447 447  
448 448  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -469,16 +469,11 @@
469 469  [[image:image-20230228115126-1.png]]
470 470  
471 471  
472 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
465 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
473 473  
474 474  [[image:image-20230228115535-2.png||height="478" width="888"]]
475 475  
476 476  
477 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
478 -
479 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
480 -
481 -
482 482  == 3.5 System ==
483 483  
484 484  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -486,7 +486,7 @@
486 486  
487 487  Shows the system info:
488 488  
489 -[[image:image-20231031162854-1.png]]
477 +[[image:image-20220917144512-5.png||height="618" width="853"]]
490 490  
491 491  
492 492  === 3.5.2 System ~-~-> System General ===
... ... @@ -502,26 +502,12 @@
502 502  === 3.5.3 System ~-~-> Backup/Restore ===
503 503  
504 504  
505 -[[image:image-20231031162927-2.png]]
493 +[[image:image-20220917144725-6.png||height="208" width="869"]]
506 506  
507 -=== 3.5.4 System ~-~-> Reboot / Reset ===
508 508  
509 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
496 +=== 3.5.4 System ~-~-> Remoteit ===
510 510  
511 -ETH LED will SOLID BULE Until the restore is finished.
512 512  
513 -When the gateway restores the factory settings is complete,
514 -
515 -The WiFi configuration will enable WiFi Access Point by default.
516 -
517 -The other configuration will be restored to the default configuration.
518 -
519 -[[image:image-20240203172853-1.png||height="365" width="901"]]
520 -
521 -
522 -=== 3.5.5 System ~-~-> Remoteit ===
523 -
524 -
525 525  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
526 526  
527 527  
... ... @@ -530,7 +530,7 @@
530 530  [[image:image-20221230092303-2.png]]
531 531  
532 532  
533 -=== 3.5.6 System ~-~-> Package Management ===
507 +=== 3.5.5 System ~-~-> Package Management ===
534 534  
535 535  
536 536  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -538,114 +538,98 @@
538 538  [[image:image-20230214094316-4.png]]
539 539  
540 540  
541 -== 3.5 Logread ==
515 += 4. Build-in Server =
542 542  
543 -=== 3.5.1 LoRa Log ===
544 544  
518 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
545 545  
546 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
547 547  
548 -[[image:image-20240416112509-1.png]]
521 +[[image:image-20230214095318-5.png||height="347" width="980"]]
549 549  
550 550  
551 -=== 3.5.2 Gateway Traffic ===
524 +(% style="color:red" %)**Note:**
552 552  
553 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
526 + **Path**: System ~-~-> Built-in Server
554 554  
555 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
556 556  
529 +**Troubleshooting:**
557 557  
558 -=== 3.5.3 System Log ===
559 559  
560 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
532 +**~ 1. URL does not jump properly**
561 561  
562 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
534 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
563 563  
536 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
564 564  
565 -=== 3.5.4 Record Log ===
566 566  
567 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
539 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
568 568  
569 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
570 570  
542 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
571 571  
544 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
572 572  
573 -= 4. Build-in Server =
574 574  
575 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
547 +Login account:
576 576  
549 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
577 577  
578 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
551 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
579 579  
580 -[[image:image-20231106180816-4.png||height="416" width="896"]]
581 581  
582 -[[image:image-20231201165904-1.png||height="466" width="899"]]
554 +[[image:image-20220725171719-1.png||height="570" width="769"]]
583 583  
584 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
585 585  
586 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
557 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
587 587  
588 588  
560 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
589 589  
590 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
562 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
591 591  
564 +[[image:image-20230321092456-1.png]]
592 592  
593 -[[image:image-20230616175558-7.png||height="362" width="894"]]
594 594  
595 -[[image:image-20231201170355-2.png||height="536" width="899"]]
567 +== 4.2 Application Server ~-~- Node-Red ==
596 596  
597 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
598 598  
570 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
599 599  
600 600  
601 -== **3). Troubleshooting:** ==
573 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
602 602  
603 603  
604 -* (((
605 -=== ** If the URL does not jump properly.** ===
606 -)))
576 +[[image:image-20220725172124-3.png||height="610" width="843"]]
607 607  
608 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
609 609  
610 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
611 611  
580 +=== **Using Node-Red, InfluxDB and Grafana** ===
612 612  
613 -* (((
614 -=== ** How to install InfluxDB, Garfana.** ===
615 -)))
582 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
616 616  
617 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
618 618  
585 +the users can refer to this link to install them.
619 619  
620 -* (((
621 -=== ** How to upgrade the gateway node.js to the latest version.** ===
622 -)))
587 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
623 623  
624 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
625 625  
590 +=== **Upgrade the node.js** ===
626 626  
627 -* (((
628 -=== ** How to batch register device on the built-in Chirpstack network server** ===
629 -)))
592 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
630 630  
631 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
632 632  
595 +the users can refer to this link to upgrade them.
633 633  
634 -* (((
635 -=== ** Why my gateway is not Chirpstack?** ===
636 -)))
597 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
637 637  
638 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
639 639  
600 +== 4.3 How to disable the built-in server ==
640 640  
641 -* (((
642 -=== ** How to disable the built-in server** ===
643 -)))
644 644  
603 +Use the following commands to start and stop the TTNv3 service:
604 +
645 645  (% class="box infomessage" %)
646 646  (((
647 -Use the following commands to start and stop the TTNv3 service:**     **
648 -
649 649  **# start**
650 650  systemctl start ttnstack
651 651  
... ... @@ -659,10 +659,10 @@
659 659  systemctl disable ttnstack
660 660  )))
661 661  
662 -(% class="box infomessage" %)
663 -(((
664 664  Use the following commands to start and stop the Node-Red service:
665 665  
622 +(% class="box infomessage" %)
623 +(((
666 666  **# start**
667 667  systemctl start nodered
668 668  
... ... @@ -677,45 +677,42 @@
677 677  )))
678 678  
679 679  
680 -* (((
681 -=== ** How to choose the Chirpstack server frequency SubBand** ===
682 -)))
638 +== 4.4 How to use ChirpStack on LPS8-V2 ==
683 683  
684 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
685 685  
686 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
641 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
687 687  
688 -[[image:image-20230602140406-3.png||height="480" width="918"]]
643 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
689 689  
690 690  
691 -When the configuration is complete, click** "Save&Apply"**.
646 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
692 692  
693 693  
694 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
649 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
695 695  
696 -[[image:image-20230602143122-4.png||height="511" width="983"]]
651 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
697 697  
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
698 698  
699 -= 5. Watch Dog =
700 700  
656 +When the configuration is complete, click** "Save&Apply"**.
701 701  
702 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
703 703  
704 -The uses can be via the below method to enable Watch Dog:
659 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
705 705  
706 -(% class="box infomessage" %)
707 -(((
708 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
709 -)))
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
710 710  
711 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
712 712  
664 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
713 713  
666 +
667 +
714 714  = 6. How users can access LPS8-V2 using serial USB =
715 715  
716 716  
717 717  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
718 718  
673 +
719 719  Port 1 of the UART on the LPS8-V2 is GND
720 720  
721 721  (% class="box infomessage" %)
... ... @@ -727,8 +727,10 @@
727 727  **GND <~-~--> GND (Black line)**
728 728  )))
729 729  
685 +
730 730  **LPS8v2 UART connection photo**
731 731  
688 +
732 732  [[image:image-20230421094319-2.png||height="351" width="392"]]
733 733  
734 734  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -740,410 +740,194 @@
740 740  [[image:image-20220804164747-2.png||height="622" width="594"]]
741 741  
742 742  
743 -= 7. OTA System Update =
700 += 7. Use the helium gateway-rs as the Data-only Hotspot =
744 744  
745 745  
746 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
703 +== **Step 1: Configure Frequency Band** ==
747 747  
748 748  
749 -== 7.1 Auto-update method ==
706 +//Each country has a requirement for frequency region. Choose the right one for your area.//
750 750  
708 +[[image:image-20220905164308-1.png]]
751 751  
752 -The default, each gateway will enable the auto-update function.
753 753  
754 -this function will be triggered every boot and every midnight.
755 755  
712 +== **Step 2: Configure the forward address** ==
756 756  
757 -Users can enable/disable it via Web Page
758 758  
759 -[[image:image-20230607094447-2.png]]
715 +**Select one of the servers to configure.**
760 760  
717 +**For example:**
761 761  
762 -== 7.2 Manual upgrade method ==
719 +[[image:image-20220905164847-2.png]]
763 763  
764 764  
765 -1). Using the Linux command to upgrade the system
766 766  
767 -(% class="box infomessage" %)
768 -(((
769 -**apt update && apt install *dragino***
770 -)))
723 +== **Step 3: Download and Install the Helium-gateway-rs** ==
771 771  
772 772  
773 -2). Upgrade the system via the Web page button of "Manual Update"
726 +**Access the gateway CLI via SSH.**
774 774  
775 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
728 +[[image:image-20230425153417-2.png]]
776 776  
777 -[[image:image-20230607093849-1.png]]
778 778  
731 +**Install the new gateway-rs**
779 779  
780 -(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
781 -= 8. More Services =
782 -
783 -== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)8.1 NTP Service/Time Synchronization(%%) ==
784 -
785 -The gateway time sync service is provided by chrony service
786 -
787 -
788 -=== 1). Modify the NTP server address: ===
789 -
790 790  (% class="box infomessage" %)
791 791  (((
792 -Configuration file path:  /etc/chrony/chrony.conf
735 +**apt update && apt install helium-gateway**
793 793  )))
794 794  
738 +[[image:image-20230425154058-4.png]]
795 795  
796 -=== 2). Start/Stop/Enable/Disable NTP service: ===
797 797  
798 -(% class="box infomessage" %)
799 -(((
800 -systemctl start chrony
801 -\\systemctl stop chrony
802 -\\systemctl disable chrony
803 -\\systemctl enable chrony
804 -)))
805 805  
742 +Option: If you installed the older gateway-rs, you have clean it
806 806  
807 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)8.2 How to connect the helium blockchain as a Data-only hotspot(%%) ==
808 -
809 -
810 810  (% class="box infomessage" %)
811 811  (((
812 -(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
813 -apt update && apt install helium-gateway
746 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
814 814  )))
815 815  
749 +[[image:image-20230425153823-3.png]]
816 816  
817 -(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
818 -= 9. More features =
819 819  
820 -(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
821 -== 9.1 How does the gateway connect to Chirpstack via MQTT Forwarder ==
752 +**Change the region setting:**
822 822  
823 823  
824 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
825 -
826 -
827 -(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
828 -=== 9.1.1 Configure Packet Forwarder ===
829 -
830 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
831 -
832 -(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
833 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
834 -
835 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
836 -* Configure the following settings:
837 -** **Service Provider:** //Custom / Private LoRaWAN//
838 -** **Server Address:** localhost
839 -** **Uplink Port:** 1700
840 -** **Downlink Port:** 1700
841 -* Click **Save & Apply**
842 -
843 -[[image:image-20240518145929-2.png||height="652" width="727"]]
844 -
845 -
846 -(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
847 -=== 9.1.2 Install ChirpStack MQTT Forwarder ===
848 -
849 -==== ====
850 -
851 -(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
852 -(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
853 -
854 -First you must login into the gateway using SSH:
855 -
856 -(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
755 +(% class="box infomessage" %)
857 857  (((
858 -ssh root@GATEWAY-IP-ADDRESS
859 -)))
757 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
860 860  
861 -(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
862 -The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
863 863  
760 +**e.g: **
864 864  
865 -(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
866 -(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
762 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
867 867  
868 -(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
869 -Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
870 -
871 -(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
872 -(((
873 -cd /tmp
874 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
764 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
875 875  )))
876 876  
877 877  
878 -(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
879 -(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
768 +**Restart the gateway-rs**
880 880  
881 -Use the dpkg package-manager to install the downloaded package. Example:
882 -
883 -(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
770 +(% class="box infomessage" %)
884 884  (((
885 -dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
772 +**systemctl restart helium_gateway**
886 886  )))
887 887  
888 -[[image:image-20240518152148-4.png]]
775 +[[image:image-20230425155612-7.png||height="265" width="911"]]
889 889  
890 890  
891 -(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
892 -**Configuration**
893 893  
894 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
779 +**Check the helium_gateway running status**
895 895  
896 -(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
897 -This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
898 898  
899 -
900 -**ChirpStack MQTT Forwarder Setting:**
901 -
902 -(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
903 -(((
904 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
905 -
906 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
907 -)))
908 -
909 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
910 -
911 -
912 -Use commands to modify configuration files:
913 -
914 -(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
915 -(((
916 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
917 -)))
918 -
919 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
920 -
921 -
922 -**(Re)start and stop commands**
923 -
924 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
925 -
926 -(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
927 -(((
928 -# start
929 -
930 -(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
931 -systemctl start chirpstack-mqtt-forwarder
932 -
933 -# stop
934 -
935 -systemctl stop chirpstack-mqtt-forwarder
936 -
937 -# restart
938 -
939 -systemctl restart chirpstack-mqtt-forwarder
940 -)))
941 -
942 -(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
943 -(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
944 -
945 -
946 -**Check result**
947 -
948 -(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
949 -Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
950 -
951 -[[image:image-20240518154223-5.png]]
952 -
953 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
954 -
955 -
956 -= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10. FAQ(%%) =
957 -
958 -== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)10.1 How to change Hostname(%%) ==
959 -
960 -
961 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
962 -
963 963  (% class="box infomessage" %)
964 964  (((
965 -hostnamectl set-hostname dragino-123456
784 +**systemctl status helium_gateway**
966 966  )))
967 967  
968 -[[image:image-20230517102429-1.png]]
969 969  
970 -After the configuration is complete, run "reboot" to restart the gateway.
788 +[[image:image-20230425154740-5.png]]
971 971  
972 972  
973 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
974 974  
792 +**Check the helium_gateway Log：**
975 975  
976 -Migrate guide:
977 -
978 -To stabilize the completion of the migration, The users can migrate in one of the following ways
979 -
980 -**Method 1. Using the Linux shell, **
981 -
982 -**Method 2. Flash a new image with the Chirpstack**
983 -
984 -
985 -=== Method 1: Using the Linux shell ===
986 -
987 987  (% class="box infomessage" %)
988 988  (((
989 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
796 +**journalctl -u helium_gateway -f**
990 990  )))
991 991  
992 992  
993 -=== Method 2: Flash a new image ===
800 +[[image:image-20230425155659-8.png]]
994 994  
995 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
996 996  
803 += 8. OTA System Update =
997 997  
998 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
999 999  
806 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1000 1000  
1001 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
1002 1002  
1003 -[[image:image-20230719100239-1.png||height="724" width="994"]]
809 +== 8.1 Auto-update method ==
1004 1004  
1005 1005  
1006 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
812 +The default, each gateway will enable the auto-update function.
1007 1007  
1008 -[[image:image-20230719100332-2.png]]
814 +this function will be triggered every boot and every midnight.
1009 1009  
1010 1010  
1011 -3. Disable the auto-update:
817 +Users can enable/disable it via Web Page
1012 1012  
1013 -[[image:image-20230719100419-3.png||height="458" width="995"]]
819 +[[image:image-20230607094447-2.png]]
1014 1014  
1015 1015  
1016 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
822 +== 8.2 Manual upgrade method ==
1017 1017  
1018 1018  
1019 -By default, the LPS8v2's built-in server is ChirpStack v4,
825 +1). Using the Linux command to upgrade the system
1020 1020  
1021 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1022 1022  
1023 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
1024 -
1025 -
1026 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1027 -
1028 -
1029 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %).6 How do I view gateway logs(%%) ==
1030 -
1031 -=== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %).6.1 LoRaWAN Log:(%%) ===
1032 -
1033 -
1034 -==== Semtech UDP Log : ====
1035 -
1036 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
1037 -
1038 -[[image:image-20231017112115-2.png||height="611" width="821"]]
1039 -
1040 -
1041 -==== Station Log: ====
1042 -
1043 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
1044 -
1045 -[[image:image-20231017111606-1.png||height="622" width="821"]]
1046 -
1047 -
1048 -=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)9.6.2  4G Log(%%) ===
1049 -
1050 -
1051 -User needs to access the Linux console of the gateway and enter the following command:
1052 -
1053 1053  (% class="box infomessage" %)
1054 1054  (((
1055 -cat /var/log/qmilog.txt
830 +**apt update && apt install *dragino***
1056 1056  )))
1057 1057  
1058 -[[image:image-20231017114417-3.png||height="543" width="679"]]
1059 1059  
834 +2). Upgrade the system via the Web page button of "Manual Update"
1060 1060  
1061 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
1062 1062  
1063 -Below are some commands as reference:
837 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
1064 1064  
1065 ->Usage:  /usr/bin/quectel-CM [options]
1066 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
1067 -> -p pincode Verify sim card pin if sim card is locked
1068 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
1069 -> -f logfilename Save log message of this program to file
1070 -> -u usbmonlog filename  Save usbmon log to file
1071 -> -i interface Specify which network interface to setup data call when multi-modems exits
1072 -> -4 Setup IPv4 data call (default)
1073 -> -6 Setup IPv6 data call
1074 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
1075 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
1076 -> -b Enable network interface bridge function (default 0)
1077 -> -v Verbose log mode, for debug purpose.[Examples]
1078 ->Example 1: /usr/bin/quectel-CM
1079 ->Example 2: /usr/bin/quectel-CM -s 3gnet
1080 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
839 +[[image:image-20230607093849-1.png]]
1081 1081  
1082 1082  
842 += 9. FAQ =
1083 1083  
1084 -=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)9.6.3 Dmesg Log(%%) ===
844 +== 9.1 How to change Hostname ==
1085 1085  
1086 1086  
1087 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
847 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
1088 1088  
1089 -[[image:image-20231017115330-5.png||height="565" width="740"]]
1090 -
1091 -
1092 -=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)9.6.4 Record Log(%%) ===
1093 -
1094 -
1095 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
1096 -
1097 -[[image:image-20231017115124-4.png||height="215" width="880"]]
1098 -
1099 -
1100 -=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)9.6.5 View gateway logs via Linux Command(%%) ===
1101 -
1102 -
1103 -**Semtech UDP Log :**
1104 -
1105 1105  (% class="box infomessage" %)
1106 1106  (((
1107 -**journalctl -u draginofwd -f**
851 +hostnamectl set-hostname dragino-123456
1108 1108  )))
1109 1109  
1110 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
854 +[[image:image-20230517102429-1.png]]
1111 1111  
856 +After the configuration is complete, run "reboot" to restart the gateway.
1112 1112  
1113 -**Station Log:**
1114 1114  
1115 -(% class="box infomessage" %)
1116 -(((
1117 -**tail -f /var/log/station.log **
1118 -)))
859 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
1119 1119  
1120 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
1121 1121  
862 +Migrate guide:
1122 1122  
1123 -**Dmesg Log:**
864 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
1124 1124  
866 +2. Download migrate script and run it.
867 +
1125 1125  (% class="box infomessage" %)
1126 1126  (((
1127 -**dmesg**
870 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1128 1128  )))
1129 1129  
1130 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
873 +[[image:image-20230602135658-1.png||height="545" width="986"]]
1131 1131  
1132 1132  
1133 -== (% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %)9.5 DIN Mount Reference:(%%) ==
876 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
1134 1134  
878 +[[image:image-20230602135825-2.png||height="356" width="855"]]
1135 1135  
1136 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
880 +The default account for chirpstack is: **admin/admin**
1137 1137  
1138 -[[image:image-20240318095617-2.png]]
1139 1139  
883 += 10. Trouble Shooting =
1140 1140  
885 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1141 1141  
1142 1142  
1143 -= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)10. Trouble Shooting(%%) =
1144 -
1145 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1146 -
1147 1147  [[image:image-20220920135918-1.png]]
1148 1148  
1149 1149  
... ... @@ -1159,7 +1159,7 @@
1159 1159  [[image:image-20220920141936-2.png]]
1160 1160  
1161 1161  
1162 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
903 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1163 1163  
1164 1164  
1165 1165  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -1167,13 +1167,13 @@
1167 1167  [[image:image-20230508171607-1.png]]
1168 1168  
1169 1169  
1170 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
911 +== 10.3  Fallback IP does not work, how can users check ==
1171 1171  
1172 1172  
1173 1173  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1174 1174  
1175 1175  
1176 -**~1. Check whether the configuration is correct**
917 +**1.Check whether the configuration is correct**
1177 1177  
1178 1178  Run the CMD command to ipconfig and ping 172.31.255.254.
1179 1179  
... ... @@ -1189,7 +1189,7 @@
1189 1189  If the firewall is not down, this will affect access to the gateway.
1190 1190  
1191 1191  
1192 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
933 +== 10.4  Click "Manual_Update", why there is no response? ==
1193 1193  
1194 1194  
1195 1195  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -1198,40 +1198,10 @@
1198 1198  [[image:image-20230527090555-3.png||height="660" width="832"]]
1199 1199  
1200 1200  
1201 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
942 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
1202 1202  
1203 1203  
1204 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1205 -
1206 -(% class="box infomessage" %)
1207 1207  (((
1208 -apt update && apt install *dragino*
1209 -
1210 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1211 -)))
1212 -
1213 -
1214 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1215 -
1216 -
1217 -**1) Build-in The Things Network**
1218 -
1219 -Refer to this link to delete the Built-in server's device.
1220 -
1221 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1222 -
1223 -
1224 -**2) Build-in Chirpstack**
1225 -
1226 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1227 -
1228 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1229 -
1230 -
1231 -= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1232 -
1233 -
1234 -(((
1235 1235  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1236 1236  )))
1237 1237  
... ... @@ -1239,16 +1239,17 @@
1239 1239  With your question as detailed as possible. We will reply and help you in the shortest.
1240 1240  
1241 1241  
1242 -= 11. Reference =
953 += 12. Reference =
1243 1243  
1244 1244  
1245 1245  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
1246 1246  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
1247 1247  
959 +
1248 1248  
1249 1249  )))
1250 1250  
1251 -= 12. Order Info =
963 += 13. Order Info =
1252 1252  
1253 1253  
1254 1254  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1280,7 +1280,7 @@
1280 1280  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1281 1281  
1282 1282  
1283 -= 13. Manufacturer Info =
995 += 14. Manufacturer Info =
1284 1284  
1285 1285  
1286 1286  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1290,7 +1290,7 @@
1290 1290  LongCheng Street, LongGang District ; Shenzhen 518116,China
1291 1291  
1292 1292  
1293 -= 14. FCC Warning =
1005 += 15. FCC Warning =
1294 1294  
1295 1295  
1296 1296  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -71.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0