Last modified by Kilight Cao on 2025/02/08 14:05
<
From version < 310.1 >
edited by Kilight Cao
on 2024/05/18 14:59
To version < 107.1 >
edited by Xiaoling
on 2022/09/17 14:14
>
Change comment: Uploaded new attachment "image-20220917141436-4.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,16 +57,14 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
69 +== **1.3 Features** ==
70 70  
71 71  
72 72  * Open Source Debian system
... ... @@ -81,31 +81,35 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
87 +== **1.4 Block Diagram** ==
88 88  
89 89  
90 +
91 +== **1.5 LED Indicators** ==
92 +
93 +
90 90  LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
97 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
99 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This RGB LED will blink GREEN when the ETH port is connecting//
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
101 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
107 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
109 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
106 106  
107 107  
108 -== 1.5 Button Intruction ==
112 +== **1.6 Button Intruction** ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -113,58 +113,33 @@
113 113  
114 114  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
120 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
123 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
125 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
122 122  
127 += **2. Quick Start** =
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 125  
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 -= 2. Quick Start =
137 -
138 -
139 139  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
140 140  
141 141  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
142 142  
143 143  
144 -== 2.1 Access and Configure LPS8-V2 ==
145 145  
146 -=== 2.1.1 Find IP address of LPS8-V2 ===
136 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
147 147  
148 148  
149 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
139 +== **2.1.1 connect the network.** ==
150 150  
151 151  
152 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
142 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
153 153  
154 -(% style="background-color:yellow" %)**dragino+dragino**
155 155  
156 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
157 -
158 -[[image:image-20230527084515-1.png]]
159 -
160 -[[image:image-20230527085250-2.png||height="495" width="284"]]
161 -
162 -
163 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 -
165 -
166 166  (((
167 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
146 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
168 168  )))
169 169  
170 170  (((
... ... @@ -174,42 +174,35 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
177 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
157 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
179 179  
180 -[[image:image-20230107084650-2.png||height="310" width="839"]]
181 181  
160 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
182 182  
183 -(% style="color:blue" %)**Steps to connect via fallback IP:**
184 184  
185 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
163 +(((
164 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
165 +)))
186 186  
187 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
188 188  
189 189  
190 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
169 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
191 191  
171 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
192 192  
193 -As in the below photo:
173 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
194 194  
195 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
196 196  
176 +[[image:image-20220622101433-4.png]]
197 197  
198 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
179 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
201 201  
202 202  
203 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
182 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
204 204  
205 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
207 -
208 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 -
210 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
211 -
212 -
213 213  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
214 214  
215 215  
... ... @@ -223,110 +223,16 @@
223 223  [[image:image-20220622102847-7.png]]
224 224  
225 225  
226 -[[image:image-20220622102901-8.png||height="476" width="938"]]
198 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
227 227  
228 228  
229 -=== 2.1.2 Access Configure Web UI ===
230 230  
202 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
231 231  
232 -**Web Interface**
233 233  
234 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
205 +=== **2.2.1 Select your area frequency** ===
235 235  
236 236  
237 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
238 -
239 -You will see the login interface of LPS8-V2 as shown below.
240 -
241 -The account details for Web Login are:
242 -
243 -(% style="color:blue" %)**User Name: root**
244 -
245 -(% style="color:blue" %)**Password:   dragino**
246 -
247 -[[image:image-20240318160845-1.png]]
248 -
249 -
250 -== 2.2  Typical Network Setup ==
251 -
252 -=== 2.2.1  Overview ===
253 -
254 -
255 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
256 -
257 -* **WAN Port Internet Mode**
258 -
259 -* **WiFi Client Mode**
260 -
261 -* **Cellular Mode**
262 -
263 -=== 2.2.2  Use WAN port to access Internet ===
264 -
265 -
266 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
267 -
268 -
269 -[[image:image-20230411100633-2.png||height="501" width="935"]]
270 -
271 -
272 -=== 2.2.3  Access the Internet as a WiFi Client ===
273 -
274 -
275 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
276 -
277 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
278 -
279 -[[image:image-20230411095739-1.png||height="264" width="691"]]
280 -
281 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
282 -
283 -
284 -=== 2.2.4  Use built-in 4G modem for internet access ===
285 -
286 -
287 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
288 -
289 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
290 -
291 -
292 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
293 -
294 -First, install the Micro SIM card as below direction
295 -
296 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
297 -
298 -
299 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
300 -
301 -
302 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
303 -
304 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
305 -
306 -
307 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 -
309 -
310 -**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 -
312 -
313 -=== 2.2.5  Check Internet connection ===
314 -
315 -
316 -In the **home** page, we can check the Internet connection.
317 -
318 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
319 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
320 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
321 -
322 -[[image:image-20230411101534-3.png||height="544" width="942"]]
323 -
324 -
325 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
326 -
327 -=== 2.3.1 Select your area frequency ===
328 -
329 -
330 330  (((
331 331  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
332 332  
... ... @@ -333,16 +333,17 @@
333 333  
334 334  )))
335 335  
336 -[[image:image-20220622103332-9.png||height="485" width="938"]]
214 +[[image:image-20220622103332-9.png]]
337 337  
338 338  
339 -=== 2.3.2 Get the only gateway EUI ===
340 340  
218 +=== **2.2.2 Get the only gateway EUI** ===
341 341  
220 +
342 342  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
343 343  
344 344  
345 -[[image:image-20220622103355-10.png||height="698" width="949"]]
224 +[[image:image-20220622103355-10.png]]
346 346  
347 347  
348 348  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
... ... @@ -360,9 +360,10 @@
360 360  [[image:image-20220622103956-12.png]]
361 361  
362 362  
363 -=== 2.3.3 Register the gateway to The Things Network ===
364 364  
243 +== **2.2.3 Register the gateway to The Things Network** ==
365 365  
245 +
366 366  **Login to The Things Network**
367 367  
368 368  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -376,30 +376,32 @@
376 376  **Get it online**
377 377  
378 378  
379 -= 3. Web Configure Pages =
380 380  
381 -== 3.1 Home ==
260 += **3. Web Configure Pages** =
382 382  
383 383  
384 -Shows the system running status:
263 +== **3.1 Home** ==
385 385  
386 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
387 387  
266 +//Shows the system running status~://
388 388  
389 -== 3.2 LoRa Settings ==
390 390  
391 -=== 3.2.1 LoRa ~-~-> LoRa ===
392 392  
270 +== **3.2 LoRa Settings** ==
393 393  
394 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
395 395  
396 -Different LPS8v2 hardware versions can support different frequency ranges:
273 +=== **3.2.1 LoRa ~-~-> LoRa** ===
397 397  
398 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
399 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
400 400  
276 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
277 +
278 +//Different LPS8v2 hardware versions can support different frequency ranges~://
279 +
280 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
281 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
282 +
401 401  (% class="wikigeneratedid" %)
402 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
284 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
403 403  
404 404  
405 405  (% class="wikigeneratedid" %)
... ... @@ -411,23 +411,26 @@
411 411  )))
412 412  
413 413  
414 -== 3.3 LoRaWAN Settings ==
415 415  
416 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
297 +== **3.3 LoRaWAN Settings** ==
417 417  
418 418  
419 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
300 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
420 420  
421 421  
303 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
304 +
305 +
422 422  [[image:image-20220616111932-2.png||height="516" width="672"]]
423 423  
424 424  
425 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
426 426  
310 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
427 427  
428 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
429 429  
313 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
430 430  
315 +
431 431  [[image:image-20220616113246-3.png||height="396" width="672"]]
432 432  
433 433  
... ... @@ -436,301 +436,128 @@
436 436  )))
437 437  
438 438  
439 -== 3.4 Network Settings ==
440 440  
441 -=== 3.4.1 Network ~-~-> WiFi ===
325 +== **3.4 Network Settings** ==
442 442  
443 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
444 444  
445 -[[image:image-20230619095946-1.png||height="332" width="827"]]
328 +=== **3.4.1 Network ~-~-> WiFi** ===
446 446  
447 447  
448 -=== 3.4.2 Network ~-~-> System Status ===
331 +[[image:image-20220616114756-4.png||height="251" width="669"]]
449 449  
450 450  
451 -[[image:image-20220820134112-2.png||height="539" width="668"]]
452 452  
335 +=== **3.4.2 Network ~-~-> System Status** ===
453 453  
454 -=== 3.4.3 Network ~-~-> Network ===
455 455  
338 +[[image:image-20220820134112-2.png||height="539" width="668"]]
456 456  
457 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
458 458  
459 -[[image:image-20230214093657-2.png||height="333" width="858"]]
460 460  
342 +=== **3.4.3 Network ~-~-> Firewall** ===
461 461  
462 -=== 3.4.4 Network ~-~-> Cellular ===
463 463  
345 +[[image:image-20220616115351-6.png||height="244" width="661"]]
464 464  
465 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
466 466  
467 -(% style="color:red" %)**Note: APN cannot be empty.**
468 468  
469 -[[image:image-20230228115126-1.png]]
349 +== **3.5 System** ==
470 470  
471 471  
472 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
352 +=== **3.5.1  System ~-~-> System Overview** ===
473 473  
474 -[[image:image-20230228115535-2.png||height="478" width="888"]]
475 475  
476 -
477 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
478 -
479 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
480 -
481 -
482 -== 3.5 System ==
483 -
484 -=== 3.5.1 System ~-~-> System Overview ===
485 -
486 -
487 487  Shows the system info:
488 488  
489 -[[image:image-20231031162854-1.png]]
490 490  
491 491  
492 -=== 3.5.2 System ~-~-> System General ===
359 +=== **3.5.2 System ~-~-> Backup/Restore** ===
493 493  
494 494  
495 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
362 +[[image:image-20220616115808-7.png||height="194" width="649"]]
496 496  
497 -In addition, Users can customize the FallBack IP address.
498 498  
499 -[[image:image-20230214094058-3.png]]
500 500  
366 += **4. Build-in Server** =
501 501  
502 -=== 3.5.3 System ~-~-> Backup/Restore ===
503 503  
369 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
504 504  
505 -[[image:image-20231031162927-2.png]]
506 506  
507 -=== 3.5.4 System ~-~-> Reboot / Reset ===
372 +[[image:image-20220820115644-1.png]]
508 508  
509 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
510 510  
511 -ETH LED will SOLID BULE Until the restore is finished.
375 +(% style="color:red" %)**Note:**
512 512  
513 -When the gateway restores the factory settings is complete,
377 + **Path**: System ~-~-> Built-in Server
514 514  
515 -The WiFi configuration will enable WiFi Access Point by default.
516 516  
517 -The other configuration will be restored to the default configuration.
380 +**Troubleshooting:**
518 518  
519 -[[image:image-20240203172853-1.png||height="365" width="901"]]
520 520  
383 +**~ 1. URL does not jump properly**
521 521  
522 -=== 3.5.5 System ~-~-> Remoteit ===
385 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
523 523  
387 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
524 524  
525 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
526 526  
527 527  
528 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
391 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
529 529  
530 -[[image:image-20221230092303-2.png]]
531 531  
394 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
532 532  
533 -=== 3.5.6 System ~-~-> Package Management ===
396 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
534 534  
535 535  
536 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
399 +Login account:
537 537  
538 -[[image:image-20230214094316-4.png]]
401 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
539 539  
403 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
540 540  
541 -== 3.5 Logread ==
542 542  
543 -=== 3.5.1 LoRa Log ===
406 +[[image:image-20220725171719-1.png||height="570" width="769"]]
544 544  
545 545  
546 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
547 547  
548 -[[image:image-20240416112509-1.png]]
410 +== **4.2 Application Server ~-~- Node-Red** ==
549 549  
550 550  
551 -=== 3.5.2 Gateway Traffic ===
413 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
552 552  
553 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
554 554  
555 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
416 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
556 556  
557 557  
558 -=== 3.5.3 System Log ===
419 +[[image:image-20220725172124-3.png||height="610" width="843"]]
559 559  
560 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
561 561  
562 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
563 563  
423 += **5. How users can access LPS8v2 using serial USB** =
564 564  
565 -=== 3.5.4 Record Log ===
566 566  
567 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
426 +**USB TTL to LPS8v2  Connection:**
568 568  
569 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
428 +Port 1 of the UART on the LPS8v2 is GND
570 570  
571 -
572 -
573 -= 4. Build-in Server =
574 -
575 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
576 -
577 -
578 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
579 -
580 -[[image:image-20231106180816-4.png||height="416" width="896"]]
581 -
582 -[[image:image-20231201165904-1.png||height="466" width="899"]]
583 -
584 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
585 -
586 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
587 -
588 -
589 -
590 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
591 -
592 -
593 -[[image:image-20230616175558-7.png||height="362" width="894"]]
594 -
595 -[[image:image-20231201170355-2.png||height="536" width="899"]]
596 -
597 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
598 -
599 -
600 -
601 -== **3). Troubleshooting:** ==
602 -
603 -
604 -* (((
605 -=== ** If the URL does not jump properly.** ===
606 -)))
607 -
608 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
609 -
610 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
611 -
612 -
613 -* (((
614 -=== ** How to install InfluxDB, Garfana.** ===
615 -)))
616 -
617 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
618 -
619 -
620 -* (((
621 -=== ** How to upgrade the gateway node.js to the latest version.** ===
622 -)))
623 -
624 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
625 -
626 -
627 -* (((
628 -=== ** How to batch register device on the built-in Chirpstack network server** ===
629 -)))
630 -
631 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
632 -
633 -
634 -* (((
635 -=== ** Why my gateway is not Chirpstack?** ===
636 -)))
637 -
638 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
639 -
640 -
641 -* (((
642 -=== ** How to disable the built-in server** ===
643 -)))
644 -
645 645  (% class="box infomessage" %)
646 646  (((
647 -Use the following commands to start and stop the TTNv3 service:**     **
432 +TXD  <~-~--> UART RXD (Gray line)
648 648  
649 -**# start**
650 -systemctl start ttnstack
434 +RXD  <~-~--> UART TXD (White line)
651 651  
652 -**# stop**
653 -systemctl stop ttnstack
654 -
655 -**# enable**
656 -systemctl enable ttnstack
657 -
658 -**#disable**
659 -systemctl disable ttnstack
436 +GND <~-~--> GND (Black line)
660 660  )))
661 661  
662 -(% class="box infomessage" %)
663 -(((
664 -Use the following commands to start and stop the Node-Red service:
665 665  
666 -**# start**
667 -systemctl start nodered
440 +**LPS8v2 UART connection photo**
668 668  
669 -**# stop**
670 -systemctl stop nodered
442 +[[image:image-20220804163015-1.png||height="621" width="466"]]
671 671  
672 -**# enable**
673 -systemctl enable nodered
674 674  
675 -**#disable**
676 -systemctl disable nodered
677 -)))
678 678  
679 -
680 -* (((
681 -=== ** How to choose the Chirpstack server frequency SubBand** ===
682 -)))
683 -
684 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
685 -
686 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
687 -
688 -[[image:image-20230602140406-3.png||height="480" width="918"]]
689 -
690 -
691 -When the configuration is complete, click** "Save&Apply"**.
692 -
693 -
694 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
695 -
696 -[[image:image-20230602143122-4.png||height="511" width="983"]]
697 -
698 -
699 -= 5. Watch Dog =
700 -
701 -
702 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
703 -
704 -The uses can be via the below method to enable Watch Dog:
705 -
706 -(% class="box infomessage" %)
707 -(((
708 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
709 -)))
710 -
711 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
712 -
713 -
714 -= 6. How users can access LPS8-V2 using serial USB =
715 -
716 -
717 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
718 -
719 -Port 1 of the UART on the LPS8-V2 is GND
720 -
721 -(% class="box infomessage" %)
722 -(((
723 -**TXD  <~-~--> UART RXD (Gray line)**
724 -
725 -**RXD  <~-~--> UART TXD (White line)**
726 -
727 -**GND <~-~--> GND (Black line)**
728 -)))
729 -
730 -**LPS8v2 UART connection photo**
731 -
732 -[[image:image-20230421094319-2.png||height="351" width="392"]]
733 -
734 734  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
735 735  
736 736  
... ... @@ -740,366 +740,116 @@
740 740  [[image:image-20220804164747-2.png||height="622" width="594"]]
741 741  
742 742  
743 -= 7. OTA System Update =
455 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
744 744  
745 745  
746 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
458 +== **Step 1: Configure Frequency Band** ==
747 747  
748 748  
749 -== 7.1 Auto-update method ==
461 +//Each country has a requirement for frequency region. Choose the right one for your area.//
750 750  
463 +[[image:image-20220905164308-1.png]]
751 751  
752 -The default, each gateway will enable the auto-update function.
753 753  
754 -this function will be triggered every boot and every midnight.
466 +== **Step 2: Configure the forward address** ==
755 755  
756 756  
757 -Users can enable/disable it via Web Page
469 +**Select one of the servers to configure.**
758 758  
759 -[[image:image-20230607094447-2.png]]
471 +**For example:**
760 760  
473 +[[image:image-20220905164847-2.png]]
761 761  
762 -== 7.2 Manual upgrade method ==
763 763  
476 +== **Step 3: Download and Install the Helium-gateway-rs** ==
764 764  
765 -1). Using the Linux command to upgrade the system
766 766  
767 -(% class="box infomessage" %)
768 -(((
769 -**apt update && apt install *dragino***
770 -)))
479 +**Access the gateway CLI via SSH.**
771 771  
481 +[[image:image-20220905165222-3.png]]
772 772  
773 -2). Upgrade the system via the Web page button of "Manual Update"
774 774  
775 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
484 +**Download gateway-rs.**
776 776  
777 -[[image:image-20230607093849-1.png]]
486 +[[image:image-20220905165715-5.png]]
778 778  
779 -
780 -= 8. FAQ =
781 -
782 -== 8.1 How to change Hostname ==
783 -
784 -
785 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
786 -
787 787  (% class="box infomessage" %)
788 788  (((
789 -hostnamectl set-hostname dragino-123456
490 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
790 790  )))
791 791  
792 -[[image:image-20230517102429-1.png]]
793 793  
794 -After the configuration is complete, run "reboot" to restart the gateway.
494 +**Install gateway-rs.**
795 795  
496 +[[image:image-20220905165917-7.png]]
796 796  
797 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
798 -
799 -
800 -Migrate guide:
801 -
802 -To stabilize the completion of the migration, The users can migrate in one of the following ways
803 -
804 -**Method 1. Using the Linux shell, **
805 -
806 -**Method 2. Flash a new image with the Chirpstack**
807 -
808 -
809 -=== Method 1: Using the Linux shell ===
810 -
811 811  (% class="box infomessage" %)
812 812  (((
813 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
500 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
814 814  )))
815 815  
816 816  
817 -=== Method 2: Flash a new image ===
504 +**Modify configuration.**
818 818  
819 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
820 820  
507 +[[image:image-20220905173847-12.png]]
821 821  
822 -== 8.3 How to reduce the 4g data consumed ==
823 823  
824 -
825 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
826 -
827 -[[image:image-20230719100239-1.png||height="724" width="994"]]
828 -
829 -
830 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
831 -
832 -[[image:image-20230719100332-2.png]]
833 -
834 -
835 -3. Disable the auto-update:
836 -
837 -[[image:image-20230719100419-3.png||height="458" width="995"]]
838 -
839 -
840 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
841 -
842 -
843 843  (% class="box infomessage" %)
844 844  (((
845 -apt update && apt install helium-gateway
512 +**region=<Enter regional parameters> \
513 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
514 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
846 846  )))
847 847  
848 848  
849 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
518 +**Restart the helium_gateway**
850 850  
520 +[[image:image-20220905170920-9.png]]
851 851  
852 -By default, the LPS8v2's built-in server is ChirpStack v4,
853 853  
854 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
855 -
856 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
857 -
858 -
859 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
860 -
861 -
862 -== 8.6 How do I view gateway logs ==
863 -
864 -=== 8.6.1 LoRaWAN Log: ===
865 -
866 -
867 -==== Semtech UDP Log : ====
868 -
869 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
870 -
871 -[[image:image-20231017112115-2.png||height="611" width="821"]]
872 -
873 -
874 -==== Station Log: ====
875 -
876 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
877 -
878 -[[image:image-20231017111606-1.png||height="622" width="821"]]
879 -
880 -
881 -=== 8.6.2  4G Log ===
882 -
883 -
884 -User needs to access the Linux console of the gateway and enter the following command:
885 -
886 886  (% class="box infomessage" %)
887 887  (((
888 -cat /var/log/qmilog.txt
525 +**systemctl restart helium_gateway**
889 889  )))
890 890  
891 -[[image:image-20231017114417-3.png||height="543" width="679"]]
892 892  
529 +**Check the helium_gateway Log：**
893 893  
894 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
531 +[[image:image-20220905173952-13.png]]
895 895  
896 -Below are some commands as reference:
897 897  
898 ->Usage:  /usr/bin/quectel-CM [options]
899 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
900 -> -p pincode Verify sim card pin if sim card is locked
901 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
902 -> -f logfilename Save log message of this program to file
903 -> -u usbmonlog filename  Save usbmon log to file
904 -> -i interface Specify which network interface to setup data call when multi-modems exits
905 -> -4 Setup IPv4 data call (default)
906 -> -6 Setup IPv6 data call
907 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
908 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
909 -> -b Enable network interface bridge function (default 0)
910 -> -v Verbose log mode, for debug purpose.[Examples]
911 ->Example 1: /usr/bin/quectel-CM
912 ->Example 2: /usr/bin/quectel-CM -s 3gnet
913 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
914 -
915 -
916 -
917 -
918 -
919 -=== 8.6.3 Dmesg Log ===
920 -
921 -
922 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
923 -
924 -[[image:image-20231017115330-5.png||height="565" width="740"]]
925 -
926 -
927 -=== 8.6.4 Record Log ===
928 -
929 -
930 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
931 -
932 -[[image:image-20231017115124-4.png||height="215" width="880"]]
933 -
934 -
935 -=== 8.6.5 View gateway logs via Linux Command ===
936 -
937 -
938 -**Semtech UDP Log :**
939 -
940 940  (% class="box infomessage" %)
941 941  (((
942 -**journalctl -u draginofwd -f**
536 +**journalctl -u helium_gateway -f**
943 943  )))
944 944  
945 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
946 946  
540 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
947 947  
948 -**Station Log:**
542 +where the helium gateway log is shown:
949 949  
950 -(% class="box infomessage" %)
951 -(((
952 -**tail -f /var/log/station.log **
953 -)))
544 +[[image:image-20220905174534-14.png]]
954 954  
955 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
956 956  
547 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
957 957  
958 -**Dmesg Log:**
959 959  
960 -(% class="box infomessage" %)
961 -(((
962 -**dmesg**
963 -)))
550 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**7. Supports**(%%) =
964 964  
965 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
966 966  
967 -
968 -== 8.7 DIN Mount Reference: ==
969 -
970 -
971 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
972 -
973 -[[image:image-20240318095617-2.png]]
974 -
975 -
976 -== 8.8 NTP Service/Time Synchronization ==
977 -
978 -The gateway time sync service is provided by chrony service
979 -
980 -
981 -=== 1). Modify the NTP server address: ===
982 -
983 -(% class="box infomessage" %)
984 984  (((
985 -Configuration file path:  /etc/chrony/chrony.conf
554 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
986 986  )))
987 987  
988 -
989 -=== 2). Start/Stop/Enable/Disable NTP service: ===
990 -
991 -(% class="box infomessage" %)
992 992  (((
993 -systemctl start chrony
994 -\\systemctl stop chrony
995 -\\systemctl disable chrony
996 -\\systemctl enable chrony
997 -)))
558 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
998 998  
999 999  
1000 1000  
1001 -= 9. Trouble Shooting =
562 += **8. Reference** =
1002 1002  
1003 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1004 1004  
1005 -[[image:image-20220920135918-1.png]]
1006 -
1007 -
1008 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
1009 -
1010 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
1011 -
1012 -
1013 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
1014 -
1015 -**Click the update URL button to configure the URL with the current eth port address.**
1016 -
1017 -[[image:image-20220920141936-2.png]]
1018 -
1019 -
1020 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1021 -
1022 -
1023 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
1024 -
1025 -[[image:image-20230508171607-1.png]]
1026 -
1027 -
1028 -== 9.3  Fallback IP does not work, how can users check ==
1029 -
1030 -
1031 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1032 -
1033 -
1034 -**~1. Check whether the configuration is correct**
1035 -
1036 -Run the CMD command to ipconfig and ping 172.31.255.254.
1037 -
1038 -If this fails, the user needs to reconfigure.
1039 -
1040 -[[image:image-20230413170224-3.png||height="433" width="707"]]
1041 -
1042 -[[image:image-20230413170246-4.png]]
1043 -
1044 -
1045 -**2. Check whether the firewall is disabled**
1046 -
1047 -If the firewall is not down, this will affect access to the gateway.
1048 -
1049 -
1050 -== 9.4  Click "Manual_Update", why there is no response? ==
1051 -
1052 -
1053 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
1054 -
1055 -
1056 -[[image:image-20230527090555-3.png||height="660" width="832"]]
1057 -
1058 -
1059 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
1060 -
1061 -
1062 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1063 -
1064 -(% class="box infomessage" %)
1065 -(((
1066 -apt update && apt install *dragino*
1067 -
1068 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1069 -)))
1070 -
1071 -
1072 -== 9.6  How to reset the built-in server ==
1073 -
1074 -
1075 -**1) Build-in The Things Network**
1076 -
1077 -Refer to this link to delete the Built-in server's device.
1078 -
1079 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1080 -
1081 -
1082 -**2) Build-in Chirpstack**
1083 -
1084 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1085 -
1086 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1087 -
1088 -
1089 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1090 -
1091 -
1092 -(((
1093 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1094 -)))
1095 -
1096 -(((
1097 -With your question as detailed as possible. We will reply and help you in the shortest.
1098 -
1099 -
1100 -= 11. Reference =
1101 -
1102 -
1103 1103  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
1104 1104  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
1105 1105  
... ... @@ -1106,7 +1106,7 @@
1106 1106  
1107 1107  )))
1108 1108  
1109 -= 12. Order Info =
571 += **9. Order Info** =
1110 1110  
1111 1111  
1112 1112  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1114,33 +1114,26 @@
1114 1114  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
1115 1115  
1116 1116  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1117 -
1118 1118  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1119 -
1120 1120  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1121 -
1122 1122  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1123 -
1124 1124  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1125 -
1126 1126  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1127 1127  
1128 1128  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
1129 1129  
1130 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
587 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
588 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
589 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
590 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1131 1131  
1132 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1133 -
1134 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1135 -
1136 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1137 -
1138 1138  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1139 1139  
1140 1140  
1141 -= 13. Manufacturer Info =
1142 1142  
596 += **10. Manufacturer Info** =
1143 1143  
598 +
1144 1144  **Shenzhen Dragino Technology Development co. LTD**
1145 1145  
1146 1146  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -1148,9 +1148,10 @@
1148 1148  LongCheng Street, LongGang District ; Shenzhen 518116,China
1149 1149  
1150 1150  
1151 -= 14. FCC Warning =
1152 1152  
607 += **11. FCC Warning** =
1153 1153  
609 +
1154 1154  (((
1155 1155  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1156 1156  )))
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0