Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 308.1 >
edited by Xiaoye
on 2024/05/07 14:10
To version < 270.1 >
edited by Kilight Cao
on 2023/11/23 16:50
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -96,11 +96,11 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
... ... @@ -126,13 +126,6 @@
126 126  See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 127  
128 128  
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 136  = 2. Quick Start =
137 137  
138 138  
... ... @@ -160,6 +160,7 @@
160 160  [[image:image-20230527085250-2.png||height="495" width="284"]]
161 161  
162 162  
156 +
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,6 +174,7 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
171 +
177 177  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
179 179  
... ... @@ -205,6 +205,7 @@
205 205  [[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
207 207  
203 +
208 208  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -244,7 +244,7 @@
244 244  
245 245  (% style="color:blue" %)**Password:   dragino**
246 246  
247 -[[image:image-20240318160845-1.png]]
243 +[[image:image-20230106153501-1.png||height="367" width="894"]]
248 248  
249 249  
250 250  == 2.2  Typical Network Setup ==
... ... @@ -307,9 +307,6 @@
307 307  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 308  
309 309  
310 -**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 -
312 -
313 313  === 2.2.5  Check Internet connection ===
314 314  
315 315  
... ... @@ -504,24 +504,10 @@
504 504  
505 505  [[image:image-20231031162927-2.png]]
506 506  
507 -=== 3.5.4 System ~-~-> Reboot / Reset ===
508 508  
509 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
501 +=== 3.5.4 System ~-~-> Remoteit ===
510 510  
511 -ETH LED will SOLID BULE Until the restore is finished.
512 512  
513 -When the gateway restores the factory settings is complete,
514 -
515 -The WiFi configuration will enable WiFi Access Point by default.
516 -
517 -The other configuration will be restored to the default configuration.
518 -
519 -[[image:image-20240203172853-1.png||height="365" width="901"]]
520 -
521 -
522 -=== 3.5.5 System ~-~-> Remoteit ===
523 -
524 -
525 525  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
526 526  
527 527  
... ... @@ -530,7 +530,7 @@
530 530  [[image:image-20221230092303-2.png]]
531 531  
532 532  
533 -=== 3.5.6 System ~-~-> Package Management ===
512 +=== 3.5.5 System ~-~-> Package Management ===
534 534  
535 535  
536 536  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -538,114 +538,102 @@
538 538  [[image:image-20230214094316-4.png]]
539 539  
540 540  
541 -== 3.5 Logread ==
520 += 4. Build-in Server =
542 542  
543 -=== 3.5.1 LoRa Log ===
544 544  
523 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
545 545  
546 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
525 +[[image:image-20231106180816-4.png||height="416" width="896"]]
547 547  
548 -[[image:image-20240416112509-1.png]]
527 +[[image:image-20230616175558-7.png||height="362" width="894"]]
549 549  
550 550  
551 -=== 3.5.2 Gateway Traffic ===
552 552  
553 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
531 +(% style="color:red" %)**Note:**
554 554  
555 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
533 + **Path**: Server ~-~-> Network Server
556 556  
535 + Server ~-~-> Application Server
557 557  
558 -=== 3.5.3 System Log ===
559 559  
560 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
538 +**Troubleshooting:**
561 561  
562 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
563 563  
541 +**~ 1. URL does not jump properly**
564 564  
565 -=== 3.5.4 Record Log ===
543 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
566 566  
567 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
545 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
568 568  
569 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
570 570  
548 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
571 571  
572 572  
573 -= 4. Build-in Server =
551 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
574 574  
575 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
553 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
576 576  
577 577  
578 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
556 +Login account:
579 579  
580 -[[image:image-20231106180816-4.png||height="416" width="896"]]
558 +**Username : ** (% style="background-color:yellow" %)**admin**
581 581  
582 -[[image:image-20231201165904-1.png||height="466" width="899"]]
560 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
583 583  
584 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
562 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
585 585  
586 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
587 587  
588 588  
566 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
589 589  
590 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
591 591  
569 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
592 592  
593 -[[image:image-20230616175558-7.png||height="362" width="894"]]
571 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
594 594  
595 -[[image:image-20231201170355-2.png||height="536" width="899"]]
573 +[[image:image-20230321092456-1.png]]
596 596  
597 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
598 598  
576 +== 4.2 Application Server ~-~- Node-Red ==
599 599  
600 600  
601 -== **3). Troubleshooting:** ==
579 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
602 602  
603 603  
604 -* (((
605 -=== ** If the URL does not jump properly.** ===
606 -)))
582 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
607 607  
608 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
609 609  
610 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
585 +[[image:image-20220725172124-3.png||height="610" width="843"]]
611 611  
612 612  
613 -* (((
614 -=== ** How to install InfluxDB, Garfana.** ===
615 -)))
616 616  
617 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
589 +=== **Using Node-Red, InfluxDB and Grafana** ===
618 618  
591 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
619 619  
620 -* (((
621 -=== ** How to upgrade the gateway node.js to the latest version.** ===
622 -)))
623 623  
624 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
594 +the users can refer to this link to install them.
625 625  
596 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
626 626  
627 -* (((
628 -=== ** How to batch register device on the built-in Chirpstack network server** ===
629 -)))
630 630  
631 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
599 +=== **Upgrade the node.js** ===
632 632  
601 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
633 633  
634 -* (((
635 -=== ** Why my gateway is not Chirpstack?** ===
636 -)))
637 637  
638 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
604 +the users can refer to this link to upgrade them.
639 639  
606 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
640 640  
641 -* (((
642 -=== ** How to disable the built-in server** ===
643 -)))
644 644  
609 +== 4.3 How to disable the built-in server ==
610 +
611 +
612 +Use the following commands to start and stop the TTNv3 service:
613 +
645 645  (% class="box infomessage" %)
646 646  (((
647 -Use the following commands to start and stop the TTNv3 service:**     **
648 -
649 649  **# start**
650 650  systemctl start ttnstack
651 651  
... ... @@ -659,10 +659,10 @@
659 659  systemctl disable ttnstack
660 660  )))
661 661  
662 -(% class="box infomessage" %)
663 -(((
664 664  Use the following commands to start and stop the Node-Red service:
665 665  
631 +(% class="box infomessage" %)
632 +(((
666 666  **# start**
667 667  systemctl start nodered
668 668  
... ... @@ -677,40 +677,36 @@
677 677  )))
678 678  
679 679  
680 -* (((
681 -=== ** How to choose the Chirpstack server frequency SubBand** ===
682 -)))
647 +== 4.4 How to use ChirpStack on LPS8-V2 ==
683 683  
684 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
685 685  
686 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
650 +The newly shipout LPS8v2 already have ChirpStack built-in by default. Older units might have built-in TTN Stack v3 server, in this case, user can change from TTN Stack v3 to ChirpStack by below instruction.
687 687  
688 -[[image:image-20230602140406-3.png||height="480" width="918"]]
652 +**[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
689 689  
690 690  
691 -When the configuration is complete, click** "Save&Apply"**.
655 +=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
692 692  
693 693  
694 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
658 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
695 695  
696 -[[image:image-20230602143122-4.png||height="511" width="983"]]
660 +If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
697 697  
662 +[[image:image-20230602140406-3.png||height="480" width="918"]]
698 698  
699 -= 5. Watch Dog =
700 700  
665 +When the configuration is complete, click** "Save&Apply"**.
701 701  
702 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
703 703  
704 -The uses can be via the below method to enable Watch Dog:
668 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
705 705  
706 -(% class="box infomessage" %)
707 -(((
708 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
709 -)))
670 +[[image:image-20230602143122-4.png||height="511" width="983"]]
710 710  
711 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
712 712  
673 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
713 713  
675 +
676 +
714 714  = 6. How users can access LPS8-V2 using serial USB =
715 715  
716 716  
... ... @@ -764,6 +764,7 @@
764 764  
765 765  1). Using the Linux command to upgrade the system
766 766  
730 +
767 767  (% class="box infomessage" %)
768 768  (((
769 769  **apt update && apt install *dragino***
... ... @@ -772,11 +772,13 @@
772 772  
773 773  2). Upgrade the system via the Web page button of "Manual Update"
774 774  
775 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
776 776  
740 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
741 +
777 777  [[image:image-20230607093849-1.png]]
778 778  
779 779  
745 +
780 780  = 8. FAQ =
781 781  
782 782  == 8.1 How to change Hostname ==
... ... @@ -799,26 +799,33 @@
799 799  
800 800  Migrate guide:
801 801  
802 -To stabilize the completion of the migration, The users can migrate in one of the following ways
768 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
803 803  
804 -**Method 1. Using the Linux shell, **
770 +**2. On the Server ~-~-> Network Server interface, click "Management"**
805 805  
806 -**Method 2. Flash a new image with the Chirpstack**
772 +[[image:image-20230616162454-1.png]]
807 807  
808 808  
809 -=== Method 1: Using the Linux shell ===
775 +**3. Click "Migrate-Chirpstack"**
810 810  
811 -(% class="box infomessage" %)
812 -(((
813 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
814 -)))
777 +[[image:image-20230616162742-2.png]]
815 815  
816 816  
817 -=== Method 2: Flash a new image ===
780 +**4. Strat Install **
818 818  
819 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
782 +Click start Install and wait until the migration succeeds
820 820  
784 +[[image:image-20230616162934-3.png]]
821 821  
786 +
787 +**5.Migration complete check result**
788 +
789 +[[image:image-20230616174526-4.png||height="706" width="983"]]
790 +
791 +
792 +[[image:image-20230616180004-9.png]]
793 +
794 +
822 822  == 8.3 How to reduce the 4g data consumed ==
823 823  
824 824  
... ... @@ -853,7 +853,7 @@
853 853  
854 854  If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
855 855  
856 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
829 +[[http:~~/~~/repo.dragino.com/release/hp0c-image/draginolps8v2-release-v1.7-230508.rar>>http://repo.dragino.com/release/hp0c-image/draginolps8v2-release-v1.7-230508.rar]]
857 857  
858 858  
859 859  Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
... ... @@ -863,7 +863,6 @@
863 863  
864 864  === 8.6.1 LoRaWAN Log: ===
865 865  
866 -
867 867  ==== Semtech UDP Log : ====
868 868  
869 869  When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
... ... @@ -880,9 +880,8 @@
880 880  
881 881  === 8.6.2  4G Log ===
882 882  
855 +The user needs to access the Linux console of the gateway and enter the following command:
883 883  
884 -User needs to access the Linux console of the gateway and enter the following command:
885 -
886 886  (% class="box infomessage" %)
887 887  (((
888 888  cat /var/log/qmilog.txt
... ... @@ -890,35 +890,8 @@
890 890  
891 891  [[image:image-20231017114417-3.png||height="543" width="679"]]
892 892  
893 -
894 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
895 -
896 -Below are some commands as reference:
897 -
898 ->Usage:  /usr/bin/quectel-CM [options]
899 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
900 -> -p pincode Verify sim card pin if sim card is locked
901 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
902 -> -f logfilename Save log message of this program to file
903 -> -u usbmonlog filename  Save usbmon log to file
904 -> -i interface Specify which network interface to setup data call when multi-modems exits
905 -> -4 Setup IPv4 data call (default)
906 -> -6 Setup IPv6 data call
907 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
908 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
909 -> -b Enable network interface bridge function (default 0)
910 -> -v Verbose log mode, for debug purpose.[Examples]
911 ->Example 1: /usr/bin/quectel-CM
912 ->Example 2: /usr/bin/quectel-CM -s 3gnet
913 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
914 -
915 -
916 -
917 -
918 -
919 919  === 8.6.3 Dmesg Log ===
920 920  
921 -
922 922  Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
923 923  
924 924  [[image:image-20231017115330-5.png||height="565" width="740"]]
... ... @@ -926,82 +926,16 @@
926 926  
927 927  === 8.6.4 Record Log ===
928 928  
929 -
930 930  Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
931 931  
932 932  [[image:image-20231017115124-4.png||height="215" width="880"]]
933 933  
934 934  
935 -=== 8.6.5 View gateway logs via Linux Command ===
936 -
937 -
938 -**Semtech UDP Log :**
939 -
940 -(% class="box infomessage" %)
941 -(((
942 -**journalctl -u draginofwd -f**
943 -)))
944 -
945 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
946 -
947 -
948 -**Station Log:**
949 -
950 -(% class="box infomessage" %)
951 -(((
952 -**tail -f /var/log/station.log **
953 -)))
954 -
955 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
956 -
957 -
958 -**Dmesg Log:**
959 -
960 -(% class="box infomessage" %)
961 -(((
962 -**dmesg**
963 -)))
964 -
965 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
966 -
967 -
968 -== 8.7 DIN Mount Reference: ==
969 -
970 -
971 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
972 -
973 -[[image:image-20240318095617-2.png]]
974 -
975 -
976 -== 8.8 NTP Service/Time Synchronization ==
977 -
978 -The gateway time sync service is provided by chrony service
979 -
980 -
981 -=== 1). Modify the NTP server address: ===
982 -
983 -(% class="box infomessage" %)
984 -(((
985 -Configuration file path:  /etc/chrony/chrony.conf
986 -)))
987 -
988 -
989 -=== 2). Start/Stop/Enable/Disable NTP service: ===
990 -
991 -(% class="box infomessage" %)
992 -(((
993 -systemctl start chrony
994 -\\systemctl stop chrony
995 -\\systemctl disable chrony
996 -\\systemctl enable chrony
997 -)))
998 -
999 -
1000 -
1001 1001  = 9. Trouble Shooting =
1002 1002  
1003 1003  == 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1004 1004  
882 +
1005 1005  [[image:image-20220920135918-1.png]]
1006 1006  
1007 1007  
... ... @@ -1031,7 +1031,7 @@
1031 1031  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1032 1032  
1033 1033  
1034 -**~1. Check whether the configuration is correct**
912 +**1.Check whether the configuration is correct**
1035 1035  
1036 1036  Run the CMD command to ipconfig and ping 172.31.255.254.
1037 1037  
... ... @@ -1061,6 +1061,7 @@
1061 1061  
1062 1062  Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1063 1063  
942 +
1064 1064  (% class="box infomessage" %)
1065 1065  (((
1066 1066  apt update && apt install *dragino*
... ... @@ -1085,7 +1085,6 @@
1085 1085  
1086 1086  [[image:image-20231106180846-5.png||height="310" width="668"]]
1087 1087  
1088 -
1089 1089  = (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1090 1090  
1091 1091  
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0