Last modified by Kilight Cao on 2025/02/07 17:44
<
From version < 303.1 >
edited by Xiaoye
on 2024/04/16 11:29
To version < 134.2 >
edited by Xiaoling
on 2023/01/07 13:43
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,15 +57,15 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
63 +* Work Temperature: -20 ~~ 65°C
64 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
67 +
68 +
69 69  == 1.3 Features ==
70 70  
71 71  
... ... @@ -81,58 +81,52 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
88 88  
89 89  
90 -LPS8-V2 has totally four LEDs, They are:
89 +== 1.4 Block Diagram ==
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
93 +== 1.5 LED Indicators ==
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
96 +LPS8-V2 has totally four LEDs, They are:
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
99 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
101 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
106 106  
103 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
107 107  
108 -== 1.5 Button Intruction ==
105 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
109 109  
107 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
110 110  
111 -LPS8-V2 has a black toggle button, which is:
109 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
111 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
113 113  
114 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
114 +== 1.6 Button Intruction ==
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
117 +LPS8-V2 has a black toggle button, which is:
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
120 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
122 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
125 125  
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 127  
125 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
128 128  
129 -When the gateway restores the factory settings is complete,
127 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
130 130  
131 -The WiFi configuration will enable WiFi Access Point by default.
132 132  
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 136  = 2. Quick Start =
137 137  
138 138  
... ... @@ -141,28 +141,14 @@
141 141  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
142 142  
143 143  
144 -== 2.1 Access and Configure LPS8-V2 ==
138 +== 2.1 Connects to the network and accesses the gateway Web UI ==
145 145  
146 -=== 2.1.1 Find IP address of LPS8-V2 ===
140 +== 2.1.1 connect the network ==
147 147  
148 148  
149 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
143 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
150 150  
151 151  
152 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
153 -
154 -(% style="background-color:yellow" %)**dragino+dragino**
155 -
156 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
157 -
158 -[[image:image-20230527084515-1.png]]
159 -
160 -[[image:image-20230527085250-2.png||height="495" width="284"]]
161 -
162 -
163 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 -
165 -
166 166  (((
167 167  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
168 168  )))
... ... @@ -174,38 +174,27 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
177 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
157 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
178 178  
179 179  
180 180  [[image:image-20230107084650-2.png||height="310" width="839"]]
181 181  
182 182  
183 -(% style="color:blue" %)**Steps to connect via fallback IP:**
163 +(% style="color:blue" %)**Steps to connect via fall back IP:**
184 184  
185 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
165 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
186 186  
187 187  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
188 188  
169 +As below photo:
189 189  
190 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
171 +[[image:image-20230107085904-4.png||height="443" width="361"]]
191 191  
192 -
193 -As in the below photo:
194 -
195 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
196 -
197 -
198 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 -
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 -
202 -
203 203  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
204 204  
205 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
176 +=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
207 207  
208 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
211 211  
... ... @@ -226,7 +226,7 @@
226 226  [[image:image-20220622102901-8.png||height="476" width="938"]]
227 227  
228 228  
229 -=== 2.1.2 Access Configure Web UI ===
198 +== 2.1.2 Access Configure Web UI ==
230 230  
231 231  
232 232  **Web Interface**
... ... @@ -240,90 +240,18 @@
240 240  
241 241  The account details for Web Login are:
242 242  
243 -(% style="color:blue" %)**User Name: root**
212 +(% style="color:#4f81bd" %)**User Name: root**
244 244  
245 -(% style="color:blue" %)**Password:   dragino**
214 +(% style="color:#4f81bd" %)**Password:   dragino**
246 246  
247 -[[image:image-20240318160845-1.png]]
216 +[[image:image-20230106153501-1.png||height="367" width="894"]]
248 248  
249 249  
250 -== 2.2  Typical Network Setup ==
219 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
251 251  
252 -=== 2.2.1  Overview ===
221 +=== 2.2.1 Select your area frequency ===
253 253  
254 254  
255 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
256 -
257 -* **WAN Port Internet Mode**
258 -
259 -* **WiFi Client Mode**
260 -
261 -* **Cellular Mode**
262 -
263 -=== 2.2.2  Use WAN port to access Internet ===
264 -
265 -
266 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
267 -
268 -
269 -[[image:image-20230411100633-2.png||height="501" width="935"]]
270 -
271 -
272 -=== 2.2.3  Access the Internet as a WiFi Client ===
273 -
274 -
275 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
276 -
277 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
278 -
279 -[[image:image-20230411095739-1.png||height="264" width="691"]]
280 -
281 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
282 -
283 -
284 -=== 2.2.4  Use built-in 4G modem for internet access ===
285 -
286 -
287 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
288 -
289 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
290 -
291 -
292 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
293 -
294 -First, install the Micro SIM card as below direction
295 -
296 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
297 -
298 -
299 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
300 -
301 -
302 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
303 -
304 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
305 -
306 -
307 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 -
309 -
310 -=== 2.2.5  Check Internet connection ===
311 -
312 -
313 -In the **home** page, we can check the Internet connection.
314 -
315 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
316 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
317 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
318 -
319 -[[image:image-20230411101534-3.png||height="544" width="942"]]
320 -
321 -
322 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
323 -
324 -=== 2.3.1 Select your area frequency ===
325 -
326 -
327 327  (((
328 328  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
329 329  
... ... @@ -333,7 +333,7 @@
333 333  [[image:image-20220622103332-9.png||height="485" width="938"]]
334 334  
335 335  
336 -=== 2.3.2 Get the only gateway EUI ===
233 +=== 2.2.2 Get the only gateway EUI ===
337 337  
338 338  
339 339  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -357,7 +357,7 @@
357 357  [[image:image-20220622103956-12.png]]
358 358  
359 359  
360 -=== 2.3.3 Register the gateway to The Things Network ===
257 +== 2.2.3 Register the gateway to The Things Network ==
361 361  
362 362  
363 363  **Login to The Things Network**
... ... @@ -378,7 +378,7 @@
378 378  == 3.1 Home ==
379 379  
380 380  
381 -Shows the system running status:
278 +//Shows the system running status~://
382 382  
383 383  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
384 384  
... ... @@ -388,15 +388,15 @@
388 388  === 3.2.1 LoRa ~-~-> LoRa ===
389 389  
390 390  
391 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
288 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
392 392  
393 -Different LPS8v2 hardware versions can support different frequency ranges:
290 +//Different LPS8v2 hardware versions can support different frequency ranges~://
394 394  
395 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
396 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
292 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
293 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
397 397  
398 398  (% class="wikigeneratedid" %)
399 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
296 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
400 400  
401 401  
402 402  (% class="wikigeneratedid" %)
... ... @@ -413,7 +413,7 @@
413 413  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
414 414  
415 415  
416 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
313 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
417 417  
418 418  
419 419  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -422,7 +422,7 @@
422 422  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
423 423  
424 424  
425 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
322 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
426 426  
427 427  
428 428  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -437,9 +437,8 @@
437 437  
438 438  === 3.4.1 Network ~-~-> WiFi ===
439 439  
440 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
441 441  
442 -[[image:image-20230619095946-1.png||height="332" width="827"]]
338 +[[image:image-20220616114756-4.png||height="251" width="669"]]
443 443  
444 444  
445 445  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -448,34 +448,12 @@
448 448  [[image:image-20220820134112-2.png||height="539" width="668"]]
449 449  
450 450  
451 -=== 3.4.3 Network ~-~-> Network ===
347 +=== 3.4.3 Network ~-~-> Firewall ===
452 452  
453 453  
454 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
350 +[[image:image-20220616115351-6.png||height="244" width="661"]]
455 455  
456 -[[image:image-20230214093657-2.png||height="333" width="858"]]
457 457  
458 -
459 -=== 3.4.4 Network ~-~-> Cellular ===
460 -
461 -
462 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
463 -
464 -(% style="color:red" %)**Note: APN cannot be empty.**
465 -
466 -[[image:image-20230228115126-1.png]]
467 -
468 -
469 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
470 -
471 -[[image:image-20230228115535-2.png||height="478" width="888"]]
472 -
473 -
474 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
475 -
476 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
477 -
478 -
479 479  == 3.5 System ==
480 480  
481 481  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -483,229 +483,109 @@
483 483  
484 484  Shows the system info:
485 485  
486 -[[image:image-20231031162854-1.png]]
360 +[[image:image-20220917144512-5.png||height="618" width="853"]]
487 487  
488 488  
489 489  === 3.5.2 System ~-~-> System General ===
490 490  
491 491  
492 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
366 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
493 493  
494 -In addition, Users can customize the FallBack IP address.
368 +[[image:image-20230107084158-1.png||height="543" width="844"]]
495 495  
496 -[[image:image-20230214094058-3.png]]
497 497  
498 -
499 499  === 3.5.3 System ~-~-> Backup/Restore ===
500 500  
501 501  
502 -[[image:image-20231031162927-2.png]]
374 +[[image:image-20220917144725-6.png||height="208" width="869"]]
503 503  
504 -=== 3.5.4 System ~-~-> Reboot / Reset ===
505 505  
506 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
377 +=== 3.5.4 System ~-~-> Remoteit ===
507 507  
508 -ETH LED will SOLID BULE Until the restore is finished.
509 509  
510 -When the gateway restores the factory settings is complete,
380 +In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
511 511  
512 -The WiFi configuration will enable WiFi Access Point by default.
513 513  
514 -The other configuration will be restored to the default configuration.
515 -
516 -[[image:image-20240203172853-1.png||height="365" width="901"]]
517 -
518 -
519 -=== 3.5.5 System ~-~-> Remoteit ===
520 -
521 -
522 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
523 -
524 -
525 525  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
526 526  
527 527  [[image:image-20221230092303-2.png]]
528 528  
529 529  
530 -=== 3.5.6 System ~-~-> Package Management ===
531 -
532 -
533 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
534 -
535 -[[image:image-20230214094316-4.png]]
536 -
537 -
538 -== 3.5 Logread ==
539 -
540 -=== 3.5.1 LoRa Log ===
541 -
542 -[[image:image-20240416112509-1.png]]
543 -
544 -
545 -== 3.5.2 Gateway Traffic ==
546 -
547 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
548 -
549 -=== 3.5.3 System Log ===
550 -
551 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
552 -
553 -=== 3.5.4 Record Log ===
554 -
555 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
556 -
557 -
558 -
559 559  = 4. Build-in Server =
560 560  
561 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
562 562  
391 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
563 563  
564 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
565 565  
566 -[[image:image-20231106180816-4.png||height="416" width="896"]]
394 +[[image:image-20220820115644-1.png||height="217" width="778"]]
567 567  
568 -[[image:image-20231201165904-1.png||height="466" width="899"]]
569 569  
570 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
397 +(% style="color:red" %)**Note:**
571 571  
572 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
399 + **Path**: System ~-~-> Built-in Server
573 573  
574 574  
402 +**Troubleshooting:**
575 575  
576 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
577 577  
405 +**~ 1. URL does not jump properly**
578 578  
579 -[[image:image-20230616175558-7.png||height="362" width="894"]]
407 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
580 580  
581 -[[image:image-20231201170355-2.png||height="536" width="899"]]
409 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
582 582  
583 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
584 584  
412 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
585 585  
586 586  
587 -== **3). Troubleshooting:** ==
415 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
588 588  
417 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
589 589  
590 -* (((
591 -=== ** If the URL does not jump properly.** ===
592 -)))
593 593  
594 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
420 +Login account:
595 595  
596 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
422 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
597 597  
424 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
598 598  
599 -* (((
600 -=== ** How to install InfluxDB, Garfana.** ===
601 -)))
602 602  
603 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
427 +[[image:image-20220725171719-1.png||height="570" width="769"]]
604 604  
605 605  
606 -* (((
607 -=== ** How to upgrade the gateway node.js to the latest version.** ===
608 -)))
430 +== 4.2 Application Server ~-~- Node-Red ==
609 609  
610 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
611 611  
433 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
612 612  
613 -* (((
614 -=== ** How to batch register device on the built-in Chirpstack network server** ===
615 -)))
616 616  
617 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
436 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
618 618  
619 619  
620 -* (((
621 -=== ** Why my gateway is not Chirpstack?** ===
622 -)))
439 +[[image:image-20220725172124-3.png||height="610" width="843"]]
623 623  
624 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
625 625  
626 626  
627 -* (((
628 -=== ** How to disable the built-in server** ===
629 -)))
443 +=== **Using Node-Red, InfluxDB and Grafana** ===
630 630  
631 -(% class="box infomessage" %)
632 -(((
633 -Use the following commands to start and stop the TTNv3 service:**     **
445 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
634 634  
635 -**# start**
636 -systemctl start ttnstack
637 637  
638 -**# stop**
639 -systemctl stop ttnstack
448 +the users can refer to this link to install them.
640 640  
641 -**# enable**
642 -systemctl enable ttnstack
450 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
643 643  
644 -**#disable**
645 -systemctl disable ttnstack
646 -)))
647 647  
648 -(% class="box infomessage" %)
649 -(((
650 -Use the following commands to start and stop the Node-Red service:
453 += 5. How users can access LPS8v2 using serial USB =
651 651  
652 -**# start**
653 -systemctl start nodered
654 654  
655 -**# stop**
656 -systemctl stop nodered
456 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
657 657  
658 -**# enable**
659 -systemctl enable nodered
660 660  
661 -**#disable**
662 -systemctl disable nodered
663 -)))
459 +Port 1 of the UART on the LPS8v2 is GND
664 664  
665 -
666 -* (((
667 -=== ** How to choose the Chirpstack server frequency SubBand** ===
668 -)))
669 -
670 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
671 -
672 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
673 -
674 -[[image:image-20230602140406-3.png||height="480" width="918"]]
675 -
676 -
677 -When the configuration is complete, click** "Save&Apply"**.
678 -
679 -
680 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
681 -
682 -[[image:image-20230602143122-4.png||height="511" width="983"]]
683 -
684 -
685 -= 5. Watch Dog =
686 -
687 -
688 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
689 -
690 -The uses can be via the below method to enable Watch Dog:
691 -
692 692  (% class="box infomessage" %)
693 693  (((
694 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
695 -)))
696 -
697 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
698 -
699 -
700 -= 6. How users can access LPS8-V2 using serial USB =
701 -
702 -
703 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
704 -
705 -Port 1 of the UART on the LPS8-V2 is GND
706 -
707 -(% class="box infomessage" %)
708 -(((
709 709  **TXD  <~-~--> UART RXD (Gray line)**
710 710  
711 711  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -713,10 +713,12 @@
713 713  **GND <~-~--> GND (Black line)**
714 714  )))
715 715  
470 +
716 716  **LPS8v2 UART connection photo**
717 717  
718 -[[image:image-20230421094319-2.png||height="351" width="392"]]
473 +[[image:image-20220804163015-1.png||height="621" width="466"]]
719 719  
475 +
720 720  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
721 721  
722 722  
... ... @@ -726,218 +726,114 @@
726 726  [[image:image-20220804164747-2.png||height="622" width="594"]]
727 727  
728 728  
729 -= 7. OTA System Update =
485 += 6. Use the helium gateway-rs as the Data-only Hotspot =
730 730  
731 731  
732 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
488 +== **Step 1: Configure Frequency Band** ==
733 733  
734 734  
735 -== 7.1 Auto-update method ==
491 +//Each country has a requirement for frequency region. Choose the right one for your area.//
736 736  
493 +[[image:image-20220905164308-1.png]]
737 737  
738 -The default, each gateway will enable the auto-update function.
739 739  
740 -this function will be triggered every boot and every midnight.
741 741  
497 +== **Step 2: Configure the forward address** ==
742 742  
743 -Users can enable/disable it via Web Page
744 744  
745 -[[image:image-20230607094447-2.png]]
500 +**Select one of the servers to configure.**
746 746  
502 +**For example:**
747 747  
748 -== 7.2 Manual upgrade method ==
504 +[[image:image-20220905164847-2.png]]
749 749  
750 750  
751 -1). Using the Linux command to upgrade the system
752 752  
753 -(% class="box infomessage" %)
754 -(((
755 -**apt update && apt install *dragino***
756 -)))
508 +== **Step 3: Download and Install the Helium-gateway-rs** ==
757 757  
758 758  
759 -2). Upgrade the system via the Web page button of "Manual Update"
511 +**Access the gateway CLI via SSH.**
760 760  
761 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
513 +[[image:image-20220905165222-3.png]]
762 762  
763 -[[image:image-20230607093849-1.png]]
764 764  
516 +**Download gateway-rs.**
765 765  
766 -= 8. FAQ =
518 +[[image:image-20220905165715-5.png]]
767 767  
768 -== 8.1 How to change Hostname ==
769 -
770 -
771 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
772 -
773 773  (% class="box infomessage" %)
774 774  (((
775 -hostnamectl set-hostname dragino-123456
522 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
776 776  )))
777 777  
778 -[[image:image-20230517102429-1.png]]
779 779  
780 -After the configuration is complete, run "reboot" to restart the gateway.
526 +**Install gateway-rs.**
781 781  
528 +[[image:image-20220905165917-7.png]]
782 782  
783 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
784 -
785 -
786 -Migrate guide:
787 -
788 -To stabilize the completion of the migration, The users can migrate in one of the following ways
789 -
790 -**Method 1. Using the Linux shell, **
791 -
792 -**Method 2. Flash a new image with the Chirpstack**
793 -
794 -
795 -=== Method 1: Using the Linux shell ===
796 -
797 797  (% class="box infomessage" %)
798 798  (((
799 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
532 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
800 800  )))
801 801  
802 802  
803 -=== Method 2: Flash a new image ===
536 +**Modify configuration.**
804 804  
805 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
806 806  
539 +[[image:image-20220905173847-12.png]]
807 807  
808 -== 8.3 How to reduce the 4g data consumed ==
809 809  
810 -
811 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
812 -
813 -[[image:image-20230719100239-1.png||height="724" width="994"]]
814 -
815 -
816 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
817 -
818 -[[image:image-20230719100332-2.png]]
819 -
820 -
821 -3. Disable the auto-update:
822 -
823 -[[image:image-20230719100419-3.png||height="458" width="995"]]
824 -
825 -
826 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
827 -
828 -
829 829  (% class="box infomessage" %)
830 830  (((
831 -apt update && apt install helium-gateway
544 +**region=<Enter regional parameters> \
545 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
546 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
832 832  )))
833 833  
834 834  
835 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
550 +**Restart the helium_gateway**
836 836  
552 +[[image:image-20220905170920-9.png]]
837 837  
838 -By default, the LPS8v2's built-in server is ChirpStack v4,
839 839  
840 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
841 -
842 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
843 -
844 -
845 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
846 -
847 -
848 -== 8.6 How do I view gateway logs ==
849 -
850 -=== 8.6.1 LoRaWAN Log: ===
851 -
852 -
853 -==== Semtech UDP Log : ====
854 -
855 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
856 -
857 -[[image:image-20231017112115-2.png||height="611" width="821"]]
858 -
859 -
860 -==== Station Log: ====
861 -
862 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
863 -
864 -[[image:image-20231017111606-1.png||height="622" width="821"]]
865 -
866 -
867 -=== 8.6.2  4G Log ===
868 -
869 -
870 -The user needs to access the Linux console of the gateway and enter the following command:
871 -
872 872  (% class="box infomessage" %)
873 873  (((
874 -cat /var/log/qmilog.txt
557 +**systemctl restart helium_gateway**
875 875  )))
876 876  
877 -[[image:image-20231017114417-3.png||height="543" width="679"]]
878 878  
561 +**Check the helium_gateway Log：**
879 879  
880 -=== 8.6.3 Dmesg Log ===
563 +[[image:image-20220905173952-13.png]]
881 881  
882 882  
883 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
884 -
885 -[[image:image-20231017115330-5.png||height="565" width="740"]]
886 -
887 -
888 -=== 8.6.4 Record Log ===
889 -
890 -
891 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
892 -
893 -[[image:image-20231017115124-4.png||height="215" width="880"]]
894 -
895 -
896 -=== 8.6.5 View gateway logs via Linux Command ===
897 -
898 -
899 -**Semtech UDP Log :**
900 -
901 901  (% class="box infomessage" %)
902 902  (((
903 -**journalctl -u draginofwd -f**
568 +**journalctl -u helium_gateway -f**
904 904  )))
905 905  
906 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
907 907  
572 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
908 908  
909 -**Station Log:**
574 +where the helium gateway log is shown:
910 910  
911 -(% class="box infomessage" %)
912 -(((
913 -**tail -f /var/log/station.log **
914 -)))
576 +[[image:image-20220905174534-14.png]]
915 915  
916 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
917 917  
579 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
918 918  
919 -**Dmesg Log:**
920 920  
921 -(% class="box infomessage" %)
922 -(((
923 -**dmesg**
924 -)))
582 += 7. OTA System Update =
925 925  
926 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
927 927  
585 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
928 928  
929 -== 8.7 DIN Mount Reference: ==
930 930  
588 += 8. Trouble Shooting =
931 931  
932 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
590 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
933 933  
934 -[[image:image-20240318095617-2.png]]
935 935  
936 -
937 -= 9. Trouble Shooting =
938 -
939 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
940 -
941 941  [[image:image-20220920135918-1.png]]
942 942  
943 943  
... ... @@ -953,96 +953,28 @@
953 953  [[image:image-20220920141936-2.png]]
954 954  
955 955  
956 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
608 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
957 957  
958 958  
959 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
960 -
961 -[[image:image-20230508171607-1.png]]
962 -
963 -
964 -== 9.3  Fallback IP does not work, how can users check ==
965 -
966 -
967 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
968 -
969 -
970 -**~1. Check whether the configuration is correct**
971 -
972 -Run the CMD command to ipconfig and ping 172.31.255.254.
973 -
974 -If this fails, the user needs to reconfigure.
975 -
976 -[[image:image-20230413170224-3.png||height="433" width="707"]]
977 -
978 -[[image:image-20230413170246-4.png]]
979 -
980 -
981 -**2. Check whether the firewall is disabled**
982 -
983 -If the firewall is not down, this will affect access to the gateway.
984 -
985 -
986 -== 9.4  Click "Manual_Update", why there is no response? ==
987 -
988 -
989 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
990 -
991 -
992 -[[image:image-20230527090555-3.png||height="660" width="832"]]
993 -
994 -
995 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
996 -
997 -
998 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
999 -
1000 -(% class="box infomessage" %)
1001 1001  (((
1002 -apt update && apt install *dragino*
1003 -
1004 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
612 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
1005 1005  )))
1006 1006  
1007 -
1008 -== 9.6  How to reset the built-in server ==
1009 -
1010 -
1011 -**1) Build-in The Things Network**
1012 -
1013 -Refer to this link to delete the Built-in server's device.
1014 -
1015 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1016 -
1017 -
1018 -**2) Build-in Chirpstack**
1019 -
1020 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1021 -
1022 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1023 -
1024 -
1025 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1026 -
1027 -
1028 1028  (((
1029 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1030 -)))
616 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
1031 1031  
1032 -(((
1033 -With your question as detailed as possible. We will reply and help you in the shortest.
1034 1034  
619 += 10. Reference =
1035 1035  
1036 -= 11. Reference =
1037 1037  
1038 -
1039 1039  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
1040 1040  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
1041 1041  
625 +
1042 1042  
1043 1043  )))
1044 1044  
1045 -= 12. Order Info =
629 += 11. Order Info =
1046 1046  
1047 1047  
1048 1048  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1050,31 +1050,23 @@
1050 1050  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
1051 1051  
1052 1052  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1053 -
1054 1054  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1055 -
1056 1056  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1057 -
1058 1058  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1059 -
1060 1060  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1061 -
1062 1062  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1063 1063  
1064 1064  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
1065 1065  
1066 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
645 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
646 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
647 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
648 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1067 1067  
1068 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1069 -
1070 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1071 -
1072 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1073 -
1074 1074  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1075 1075  
1076 1076  
1077 -= 13. Manufacturer Info =
653 += 12. Manufacturer Info =
1078 1078  
1079 1079  
1080 1080  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1084,7 +1084,7 @@
1084 1084  LongCheng Street, LongGang District ; Shenzhen 518116,China
1085 1085  
1086 1086  
1087 -= 14. FCC Warning =
663 += 13. FCC Warning =
1088 1088  
1089 1089  
1090 1090  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0