Last modified by Kilight Cao on 2025/02/08 14:05
<
From version < 297.4 >
edited by Xiaoling
on 2024/03/20 14:19
To version < 82.1 >
edited by Xiaoye
on 2022/08/20 13:41
>
Change comment: Uploaded new attachment "image-20220820134112-2.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -8,30 +8,27 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
27 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
31 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
39 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,16 +57,14 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
61 +* Work Temperature: -20 ~~ 65°C
62 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
65 +== **1.3 Features** ==
70 70  
71 71  
72 72  * Open Source Debian system
... ... @@ -81,90 +81,55 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
80 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
81 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
83 +== **1.4 Block Diagram** ==
88 88  
89 89  
90 -LPS8-V2 has totally four LEDs, They are:
91 91  
87 +== **1.5 LED Indicators** ==
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
90 +LPS8-V2 has totally four LEDs, They are:
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
93 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
95 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
97 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
99 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
106 106  
101 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
107 107  
108 -== 1.5 Button Intruction ==
103 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
109 109  
105 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
110 110  
111 -LPS8-V2 has a black toggle button, which is:
112 112  
113 113  
114 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
109 += **2. Quick Start** =
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
117 117  
118 -
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
120 -
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 -
123 -
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 -= 2. Quick Start =
137 -
138 -
139 139  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
140 140  
141 141  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
142 142  
143 143  
144 -== 2.1 Access and Configure LPS8-V2 ==
145 145  
146 -=== 2.1.1 Find IP address of LPS8-V2 ===
118 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
147 147  
148 148  
149 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
121 +== **2.1.1 connect the network.** ==
150 150  
151 151  
152 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
124 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
153 153  
154 -(% style="background-color:yellow" %)**dragino+dragino**
155 155  
156 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
157 -
158 -[[image:image-20230527084515-1.png]]
159 -
160 -[[image:image-20230527085250-2.png||height="495" width="284"]]
161 -
162 -
163 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 -
165 -
166 166  (((
167 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
128 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
168 168  )))
169 169  
170 170  (((
... ... @@ -174,42 +174,34 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
177 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
139 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
179 179  
180 -[[image:image-20230107084650-2.png||height="310" width="839"]]
181 181  
142 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
182 182  
183 -(% style="color:blue" %)**Steps to connect via fallback IP:**
184 184  
185 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
145 +(((
146 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
147 +)))
186 186  
187 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
188 188  
189 189  
190 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
151 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
191 191  
153 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
192 192  
193 -As in the below photo:
155 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
194 194  
195 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
157 +[[image:image-20220622101433-4.png]]
196 196  
197 197  
198 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
160 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 201  
163 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
202 202  
203 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
204 204  
205 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
206 -
207 -
208 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 -
210 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
211 -
212 -
213 213  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
214 214  
215 215  
... ... @@ -223,125 +223,32 @@
223 223  [[image:image-20220622102847-7.png]]
224 224  
225 225  
226 -[[image:image-20220622102901-8.png||height="476" width="938"]]
179 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
227 227  
228 228  
229 -=== 2.1.2 Access Configure Web UI ===
230 230  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
231 231  
232 -**Web Interface**
233 233  
234 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
235 235  
236 236  
237 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
238 -
239 -You will see the login interface of LPS8-V2 as shown below.
240 -
241 -The account details for Web Login are:
242 -
243 -(% style="color:blue" %)**User Name: root**
244 -
245 -(% style="color:blue" %)**Password:   dragino**
246 -
247 -[[image:image-20240318160845-1.png]]
248 -
249 -
250 -== 2.2  Typical Network Setup ==
251 -
252 -=== 2.2.1  Overview ===
253 -
254 -
255 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
256 -
257 -* **WAN Port Internet Mode**
258 -
259 -* **WiFi Client Mode**
260 -
261 -* **Cellular Mode**
262 -
263 -=== 2.2.2  Use WAN port to access Internet ===
264 -
265 -
266 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
267 -
268 -
269 -[[image:image-20230411100633-2.png||height="501" width="935"]]
270 -
271 -
272 -=== 2.2.3  Access the Internet as a WiFi Client ===
273 -
274 -
275 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
276 -
277 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
278 -
279 -[[image:image-20230411095739-1.png||height="264" width="691"]]
280 -
281 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
282 -
283 -
284 -=== 2.2.4  Use built-in 4G modem for internet access ===
285 -
286 -
287 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
288 -
289 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
290 -
291 -
292 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
293 -
294 -First, install the Micro SIM card as below direction
295 -
296 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
297 -
298 -
299 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
300 -
301 -
302 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
303 -
304 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
305 -
306 -
307 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 -
309 -
310 -=== 2.2.5  Check Internet connection ===
311 -
312 -
313 -In the **home** page, we can check the Internet connection.
314 -
315 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
316 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
317 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
318 -
319 -[[image:image-20230411101534-3.png||height="544" width="942"]]
320 -
321 -
322 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
323 -
324 -=== 2.3.1 Select your area frequency ===
325 -
326 -
327 327  (((
328 328  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
329 -
330 -
331 331  )))
332 332  
333 -[[image:image-20220622103332-9.png||height="485" width="938"]]
193 +[[image:image-20220622103332-9.png]]
334 334  
335 335  
336 -=== 2.3.2 Get the only gateway EUI ===
337 337  
197 +=== **2.2.2 Get the only gateway EUI** ===
338 338  
199 +
339 339  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
340 340  
202 +[[image:image-20220622103355-10.png]]
341 341  
342 -[[image:image-20220622103355-10.png||height="698" width="949"]]
343 343  
344 -
345 345  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
346 346  
347 347  
... ... @@ -357,9 +357,10 @@
357 357  [[image:image-20220622103956-12.png]]
358 358  
359 359  
360 -=== 2.3.3 Register the gateway to The Things Network ===
361 361  
221 +== 2.2.3 Register the gateway to The Things Network ==
362 362  
223 +
363 363  **Login to The Things Network**
364 364  
365 365  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -373,648 +373,222 @@
373 373  **Get it online**
374 374  
375 375  
376 -= 3. Web Configure Pages =
377 377  
378 -== 3.1 Home ==
238 += **3. Web Configure Pages** =
379 379  
380 380  
381 -Shows the system running status:
241 +== **3.1 Home** ==
382 382  
383 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
384 384  
244 +//Shows the system running status~://
385 385  
386 -== 3.2 LoRa Settings ==
387 387  
388 -=== 3.2.1 LoRa ~-~-> LoRa ===
247 +== **3.2 LoRa Settings** ==
389 389  
390 390  
391 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
250 +=== **3.2.1 LoRa ~-~-> LoRa** ===
392 392  
393 -Different LPS8v2 hardware versions can support different frequency ranges:
394 394  
395 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
396 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
253 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
397 397  
398 -(% class="wikigeneratedid" %)
399 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
255 +//Different LPS8v2 hardware versions can support different frequency ranges~://
400 400  
257 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
258 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
401 401  
402 402  (% class="wikigeneratedid" %)
261 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
262 +
263 +(% class="wikigeneratedid" %)
403 403  [[image:image-20220616110739-1.png||height="372" width="682"]]
404 404  
405 405  
406 406  (((
407 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
268 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
408 408  )))
409 409  
410 410  
411 -== 3.3 LoRaWAN Settings ==
412 412  
413 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
273 +== **3.3 LoRaWAN Settings** ==
414 414  
415 415  
416 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
276 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
417 417  
418 418  
279 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
280 +
419 419  [[image:image-20220616111932-2.png||height="516" width="672"]]
420 420  
421 421  
422 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
423 423  
285 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
424 424  
425 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
426 426  
288 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
427 427  
428 428  [[image:image-20220616113246-3.png||height="396" width="672"]]
429 429  
430 430  
431 431  (((
432 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
294 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
433 433  )))
434 434  
435 435  
436 -== 3.4 Network Settings ==
437 437  
438 -=== 3.4.1 Network ~-~-> WiFi ===
299 +== **3.4 Network Settings** ==
439 439  
440 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
441 441  
442 -[[image:image-20230619095946-1.png||height="332" width="827"]]
302 +=== **3.4.1 Network ~-~-> WiFi** ===
443 443  
444 444  
445 -=== 3.4.2 Network ~-~-> System Status ===
305 +[[image:image-20220616114756-4.png||height="251" width="669"]]
446 446  
447 447  
448 -[[image:image-20220820134112-2.png||height="539" width="668"]]
449 449  
309 +=== **3.4.2 Network ~-~-> System Status** ===
450 450  
451 -=== 3.4.3 Network ~-~-> Network ===
452 452  
312 +[[image:image-20220616115229-5.png||height="548" width="665"]]
453 453  
454 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
455 455  
456 -[[image:image-20230214093657-2.png||height="333" width="858"]]
457 457  
316 +=== **3.4.3 Network ~-~-> Firewall** ===
458 458  
459 -=== 3.4.4 Network ~-~-> Cellular ===
460 460  
319 +[[image:image-20220616115351-6.png||height="244" width="661"]]
461 461  
462 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
463 463  
464 -(% style="color:red" %)**Note: APN cannot be empty.**
465 465  
466 -[[image:image-20230228115126-1.png]]
323 +== **3.5 System** ==
467 467  
468 468  
469 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
326 +=== **3.5.1  System ~-~-> System Overview** ===
470 470  
471 -[[image:image-20230228115535-2.png||height="478" width="888"]]
472 472  
473 -
474 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
475 -
476 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
477 -
478 -
479 -== 3.5 System ==
480 -
481 -=== 3.5.1 System ~-~-> System Overview ===
482 -
483 -
484 484  Shows the system info:
485 485  
486 -[[image:image-20231031162854-1.png]]
487 487  
488 488  
489 -=== 3.5.2 System ~-~-> System General ===
333 +=== **3.5.2 System ~-~-> Backup/Restore** ===
490 490  
491 491  
492 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
336 +[[image:image-20220616115808-7.png||height="194" width="649"]]
493 493  
494 -In addition, Users can customize the FallBack IP address.
495 495  
496 -[[image:image-20230214094058-3.png]]
497 497  
340 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
498 498  
499 -=== 3.5.3 System ~-~-> Backup/Restore ===
500 500  
343 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
501 501  
502 -[[image:image-20231031162927-2.png]]
345 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
503 503  
504 -=== 3.5.4 System ~-~-> Reboot / Reset ===
505 505  
506 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
348 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
507 507  
508 -ETH LED will SOLID BULE Until the restore is finished.
509 509  
510 -When the gateway restores the factory settings is complete,
351 +Login account:
511 511  
512 -The WiFi configuration will enable WiFi Access Point by default.
353 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
513 513  
514 -The other configuration will be restored to the default configuration.
355 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
515 515  
516 -[[image:image-20240203172853-1.png||height="365" width="901"]]
517 517  
358 +[[image:image-20220725171719-1.png||height="570" width="769"]]
518 518  
519 -=== 3.5.5 System ~-~-> Remoteit ===
520 520  
521 -
522 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
523 -
524 -
525 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
526 -
527 -[[image:image-20221230092303-2.png]]
528 -
529 -
530 -=== 3.5.6 System ~-~-> Package Management ===
531 -
532 -
533 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
534 -
535 -[[image:image-20230214094316-4.png]]
536 -
537 -
538 -= 4. Build-in Server =
539 -
540 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
541 -
542 -
543 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
544 -
545 -[[image:image-20231106180816-4.png||height="416" width="896"]]
546 -
547 -[[image:image-20231201165904-1.png||height="466" width="899"]]
548 -
549 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
550 -
551 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
552 -
553 -
554 -
555 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
556 -
557 -
558 -[[image:image-20230616175558-7.png||height="362" width="894"]]
559 -
560 -[[image:image-20231201170355-2.png||height="536" width="899"]]
561 -
562 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
563 -
564 -
565 -
566 -== **3). Troubleshooting:** ==
567 -
568 -
569 -* (((
570 -=== ** If the URL does not jump properly.** ===
571 -)))
572 -
573 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
574 -
575 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
576 -
577 -
578 -* (((
579 -=== ** How to install InfluxDB, Garfana.** ===
580 -)))
581 -
582 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
583 -
584 -
585 -* (((
586 -=== ** How to upgrade the gateway node.js to the latest version.** ===
587 -)))
588 -
589 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
590 -
591 -
592 -* (((
593 -=== ** How to batch register device on the built-in Chirpstack network server** ===
594 -)))
595 -
596 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
597 -
598 -
599 -* (((
600 -=== ** Why my gateway is not Chirpstack?** ===
601 -)))
602 -
603 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
604 -
605 -
606 -* (((
607 -=== ** How to disable the built-in server** ===
608 -)))
609 -
610 -(% class="box infomessage" %)
611 611  (((
612 -Use the following commands to start and stop the TTNv3 service:**     **
613 -
614 -**# start**
615 -systemctl start ttnstack
616 -
617 -**# stop**
618 -systemctl stop ttnstack
619 -
620 -**# enable**
621 -systemctl enable ttnstack
622 -
623 -**#disable**
624 -systemctl disable ttnstack
362 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with the TTN-Stack
363 + You can complete the installation manually with the following command.**
625 625  )))
626 626  
627 -(% class="box infomessage" %)
628 -(((
629 -Use the following commands to start and stop the Node-Red service:
630 630  
631 -**# start**
632 -systemctl start nodered
633 -
634 -**# stop**
635 -systemctl stop nodered
636 -
637 -**# enable**
638 -systemctl enable nodered
639 -
640 -**#disable**
641 -systemctl disable nodered
642 -)))
643 -
644 -
645 -* (((
646 -=== ** How to choose the Chirpstack server frequency SubBand** ===
647 -)))
648 -
649 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
650 -
651 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
652 -
653 -[[image:image-20230602140406-3.png||height="480" width="918"]]
654 -
655 -
656 -When the configuration is complete, click** "Save&Apply"**.
657 -
658 -
659 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
660 -
661 -[[image:image-20230602143122-4.png||height="511" width="983"]]
662 -
663 -
664 -= 5. Watch Dog =
665 -
666 -
667 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
668 -
669 -The uses can be via the below method to enable Watch Dog:
670 -
671 671  (% class="box infomessage" %)
672 672  (((
673 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
674 -)))
675 -
676 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
677 -
678 -
679 -= 6. How users can access LPS8-V2 using serial USB =
680 -
681 -
682 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
683 -
684 -Port 1 of the UART on the LPS8-V2 is GND
685 -
686 -(% class="box infomessage" %)
687 687  (((
688 -**TXD  <~-~--> UART RXD (Gray line)**
689 -
690 -**RXD  <~-~--> UART TXD (White line)**
691 -
692 -**GND <~-~--> GND (Black line)**
370 +(% style="background-color:#fcf8e3" %)cd /tmp && wget [[http:~~/~~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh>>http://repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh]]
371 +chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
693 693  )))
694 -
695 -**LPS8v2 UART connection photo**
696 -
697 -[[image:image-20230421094319-2.png||height="351" width="392"]]
698 -
699 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
700 -
701 -
702 -[[image:image-20220804164928-3.png||height="320" width="332"]]
703 -
704 -
705 -[[image:image-20220804164747-2.png||height="622" width="594"]]
706 -
707 -
708 -= 7. OTA System Update =
709 -
710 -
711 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
712 -
713 -
714 -== 7.1 Auto-update method ==
715 -
716 -
717 -The default, each gateway will enable the auto-update function.
718 -
719 -this function will be triggered every boot and every midnight.
720 -
721 -
722 -Users can enable/disable it via Web Page
723 -
724 -[[image:image-20230607094447-2.png]]
725 -
726 -
727 -== 7.2 Manual upgrade method ==
728 -
729 -
730 -1). Using the Linux command to upgrade the system
731 -
732 -(% class="box infomessage" %)
733 -(((
734 -**apt update && apt install *dragino***
735 735  )))
736 736  
737 737  
738 -2). Upgrade the system via the Web page button of "Manual Update"
739 739  
740 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
377 += **5. Build-in Application Server ~-~- Node-Red** =
741 741  
742 -[[image:image-20230607093849-1.png]]
743 743  
380 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
744 744  
745 -= 8. FAQ =
382 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
746 746  
747 -== 8.1 How to change Hostname ==
748 748  
385 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
749 749  
750 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
751 751  
752 -(% class="box infomessage" %)
753 -(((
754 -hostnamectl set-hostname dragino-123456
755 -)))
388 +[[image:image-20220725172124-3.png||height="610" width="843"]]
756 756  
757 -[[image:image-20230517102429-1.png]]
758 758  
759 -After the configuration is complete, run "reboot" to restart the gateway.
760 -
761 -
762 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
763 -
764 -
765 -Migrate guide:
766 -
767 -To stabilize the completion of the migration, The users can migrate in one of the following ways
768 -
769 -**Method 1. Using the Linux shell, **
770 -
771 -**Method 2. Flash a new image with the Chirpstack**
772 -
773 -
774 -=== Method 1: Using the Linux shell ===
775 -
776 -(% class="box infomessage" %)
777 777  (((
778 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
392 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
393 + You can complete the installation manually with the following command.**
779 779  )))
780 780  
781 781  
782 -=== Method 2: Flash a new image ===
783 783  
784 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
785 -
786 -
787 -== 8.3 How to reduce the 4g data consumed ==
788 -
789 -
790 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
791 -
792 -[[image:image-20230719100239-1.png||height="724" width="994"]]
793 -
794 -
795 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
796 -
797 -[[image:image-20230719100332-2.png]]
798 -
799 -
800 -3. Disable the auto-update:
801 -
802 -[[image:image-20230719100419-3.png||height="458" width="995"]]
803 -
804 -
805 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
806 -
807 -
808 808  (% class="box infomessage" %)
809 809  (((
810 -apt update && apt install helium-gateway
811 -)))
812 -
813 -
814 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
815 -
816 -
817 -By default, the LPS8v2's built-in server is ChirpStack v4,
818 -
819 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
820 -
821 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
822 -
823 -
824 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
825 -
826 -
827 -== 8.6 How do I view gateway logs ==
828 -
829 -=== 8.6.1 LoRaWAN Log: ===
830 -
831 -
832 -==== Semtech UDP Log : ====
833 -
834 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
835 -
836 -[[image:image-20231017112115-2.png||height="611" width="821"]]
837 -
838 -
839 -==== Station Log: ====
840 -
841 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
842 -
843 -[[image:image-20231017111606-1.png||height="622" width="821"]]
844 -
845 -
846 -=== 8.6.2  4G Log ===
847 -
848 -
849 -The user needs to access the Linux console of the gateway and enter the following command:
850 -
851 -(% class="box infomessage" %)
852 852  (((
853 -cat /var/log/qmilog.txt
401 +(% style="background-color:#fcf8e3" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
402 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
854 854  )))
855 -
856 -[[image:image-20231017114417-3.png||height="543" width="679"]]
857 -
858 -
859 -=== 8.6.3 Dmesg Log ===
860 -
861 -
862 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
863 -
864 -[[image:image-20231017115330-5.png||height="565" width="740"]]
865 -
866 -
867 -=== 8.6.4 Record Log ===
868 -
869 -
870 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
871 -
872 -[[image:image-20231017115124-4.png||height="215" width="880"]]
873 -
874 -
875 -=== 8.6.5 View gateway logs via Linux Command ===
876 -
877 -
878 -**Semtech UDP Log :**
879 -
880 -(% class="box infomessage" %)
881 -(((
882 -**journalctl -u draginofwd -f**
883 883  )))
884 884  
885 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
406 +[[image:image-20220728102000-1.png]]
886 886  
887 887  
888 -**Station Log:**
409 += **6. How users can access LPS8v2 using serial USB** =
889 889  
890 -(% class="box infomessage" %)
891 -(((
892 -**tail -f /var/log/station.log **
893 -)))
894 894  
895 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
412 +**USB TTL to LPS8v2  Connection:**
896 896  
414 +Port 1 of the UART on the LPS8v2 is GND
897 897  
898 -**Dmesg Log:**
899 -
900 900  (% class="box infomessage" %)
901 901  (((
902 -**dmesg**
903 -)))
418 +TXD  <~-~--> UART RXD (Gray line)
904 904  
905 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
420 +RXD  <~-~--> UART TXD (White line)
906 906  
907 -
908 -== 8.7 DIN Mount Reference: ==
909 -
910 -
911 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
912 -
913 -[[image:image-20240318095617-2.png]]
914 -
915 -
916 -= 9. Trouble Shooting =
917 -
918 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
919 -
920 -[[image:image-20220920135918-1.png]]
921 -
922 -
923 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
924 -
925 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
926 -
927 -
928 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
929 -
930 -**Click the update URL button to configure the URL with the current eth port address.**
931 -
932 -[[image:image-20220920141936-2.png]]
933 -
934 -
935 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
936 -
937 -
938 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
939 -
940 -[[image:image-20230508171607-1.png]]
941 -
942 -
943 -== 9.3  Fallback IP does not work, how can users check ==
944 -
945 -
946 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
947 -
948 -
949 -**~1. Check whether the configuration is correct**
950 -
951 -Run the CMD command to ipconfig and ping 172.31.255.254.
952 -
953 -If this fails, the user needs to reconfigure.
954 -
955 -[[image:image-20230413170224-3.png||height="433" width="707"]]
956 -
957 -[[image:image-20230413170246-4.png]]
958 -
959 -
960 -**2. Check whether the firewall is disabled**
961 -
962 -If the firewall is not down, this will affect access to the gateway.
963 -
964 -
965 -== 9.4  Click "Manual_Update", why there is no response? ==
966 -
967 -
968 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
969 -
970 -
971 -[[image:image-20230527090555-3.png||height="660" width="832"]]
972 -
973 -
974 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
975 -
976 -
977 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
978 -
979 -(% class="box infomessage" %)
980 -(((
981 -apt update && apt install *dragino*
982 -
983 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
422 +GND <~-~--> GND (Black line)
984 984  )))
985 985  
986 986  
987 -== 9.6  How to reset the built-in server ==
426 +**LPS8v2 UART connection photo**
988 988  
428 +[[image:image-20220804163015-1.png||height="621" width="466"]]
989 989  
990 -**1) Build-in The Things Network**
991 991  
992 -Refer to this link to delete the Built-in server's device.
993 993  
994 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
432 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
995 995  
434 +[[image:image-20220804164928-3.png||height="320" width="332"]]
996 996  
997 -**2) Build-in Chirpstack**
436 +[[image:image-20220804164747-2.png||height="622" width="594"]]
998 998  
999 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
438 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
1000 1000  
1001 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1002 1002  
1003 -
1004 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1005 -
1006 -
1007 1007  (((
1008 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
442 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
1009 1009  )))
1010 1010  
1011 1011  (((
1012 -With your question as detailed as possible. We will reply and help you in the shortest.
446 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
1013 1013  
1014 1014  
1015 -= 11. Reference =
1016 1016  
450 += **11 Reference** =
1017 1017  
452 +
1018 1018  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
1019 1019  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
1020 1020  
... ... @@ -1021,7 +1021,7 @@
1021 1021  
1022 1022  )))
1023 1023  
1024 -= 12. Order Info =
459 += **12. Order Info** =
1025 1025  
1026 1026  
1027 1027  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1029,33 +1029,26 @@
1029 1029  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
1030 1030  
1031 1031  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1032 -
1033 1033  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1034 -
1035 1035  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1036 -
1037 1037  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1038 -
1039 1039  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1040 -
1041 1041  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1042 1042  
1043 1043  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
1044 1044  
1045 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
475 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
476 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
477 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
478 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1046 1046  
1047 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1048 -
1049 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1050 -
1051 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1052 -
1053 1053  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1054 1054  
1055 1055  
1056 -= 13. Manufacturer Info =
1057 1057  
484 += **13. Manufacturer Info** =
1058 1058  
486 +
1059 1059  **Shenzhen Dragino Technology Development co. LTD**
1060 1060  
1061 1061  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -1063,9 +1063,10 @@
1063 1063  LongCheng Street, LongGang District ; Shenzhen 518116,China
1064 1064  
1065 1065  
1066 -= 14. FCC Warning =
1067 1067  
495 += **14. FCC Warning** =
1068 1068  
497 +
1069 1069  (((
1070 1070  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1071 1071  )))
... ... @@ -1094,7 +1094,5 @@
1094 1094  
1095 1095  (((
1096 1096  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
1097 -
1098 -
1099 1099  )))
1100 1100  )))
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0