Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 297.4 >
edited by Xiaoling
on 2024/03/20 14:19
To version < 235.1 >
edited by Xiaoye
on 2023/07/19 10:08
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -81,7 +81,7 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 87  == 1.4 LED Indicators ==
... ... @@ -96,11 +96,11 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
... ... @@ -121,18 +121,6 @@
121 121   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 -
136 136  = 2. Quick Start =
137 137  
138 138  
... ... @@ -160,6 +160,7 @@
160 160  [[image:image-20230527085250-2.png||height="495" width="284"]]
161 161  
162 162  
151 +
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,6 +174,7 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
166 +
177 177  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
179 179  
... ... @@ -197,7 +197,7 @@
197 197  
198 198  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
190 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 201  
202 202  
203 203  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -205,6 +205,7 @@
205 205  [[image:image-20230111094247-2.png||height="619" width="1250"]]
206 206  
207 207  
198 +
208 208  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -244,7 +244,7 @@
244 244  
245 245  (% style="color:blue" %)**Password:   dragino**
246 246  
247 -[[image:image-20240318160845-1.png]]
238 +[[image:image-20230106153501-1.png||height="367" width="894"]]
248 248  
249 249  
250 250  == 2.2  Typical Network Setup ==
... ... @@ -483,7 +483,7 @@
483 483  
484 484  Shows the system info:
485 485  
486 -[[image:image-20231031162854-1.png]]
477 +[[image:image-20220917144512-5.png||height="618" width="853"]]
487 487  
488 488  
489 489  === 3.5.2 System ~-~-> System General ===
... ... @@ -499,118 +499,125 @@
499 499  === 3.5.3 System ~-~-> Backup/Restore ===
500 500  
501 501  
502 -[[image:image-20231031162927-2.png]]
493 +[[image:image-20220917144725-6.png||height="208" width="869"]]
503 503  
504 -=== 3.5.4 System ~-~-> Reboot / Reset ===
505 505  
506 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
496 +=== 3.5.4 System ~-~-> Remoteit ===
507 507  
508 -ETH LED will SOLID BULE Until the restore is finished.
509 509  
510 -When the gateway restores the factory settings is complete,
499 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
511 511  
512 -The WiFi configuration will enable WiFi Access Point by default.
513 513  
514 -The other configuration will be restored to the default configuration.
502 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
515 515  
516 -[[image:image-20240203172853-1.png||height="365" width="901"]]
504 +[[image:image-20221230092303-2.png]]
517 517  
518 518  
519 -=== 3.5.5 System ~-~-> Remoteit ===
507 +=== 3.5.5 System ~-~-> Package Management ===
520 520  
521 521  
522 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
510 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
523 523  
512 +[[image:image-20230214094316-4.png]]
524 524  
525 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
526 526  
527 -[[image:image-20221230092303-2.png]]
515 += 4. Build-in Server =
528 528  
529 529  
530 -=== 3.5.6 System ~-~-> Package Management ===
518 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
531 531  
520 +[[image:image-20230616175617-8.png||height="390" width="894"]]
532 532  
533 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
522 +[[image:image-20230616175558-7.png||height="362" width="894"]]
534 534  
535 -[[image:image-20230214094316-4.png]]
536 536  
537 537  
538 -= 4. Build-in Server =
526 +(% style="color:red" %)**Note:**
539 539  
540 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
528 + **Path**: Server ~-~-> Network Server
541 541  
530 + Server ~-~-> Application Server
542 542  
543 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
544 544  
545 -[[image:image-20231106180816-4.png||height="416" width="896"]]
533 +**Troubleshooting:**
546 546  
547 -[[image:image-20231201165904-1.png||height="466" width="899"]]
548 548  
549 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
536 +**~ 1. URL does not jump properly**
550 550  
551 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
538 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
552 552  
540 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
553 553  
554 554  
555 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
543 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
556 556  
557 557  
558 -[[image:image-20230616175558-7.png||height="362" width="894"]]
546 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
559 559  
560 -[[image:image-20231201170355-2.png||height="536" width="899"]]
548 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
561 561  
562 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
563 563  
551 +Login account:
564 564  
553 +**Username : ** (% style="background-color:yellow" %)**admin**
565 565  
566 -== **3). Troubleshooting:** ==
555 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
567 567  
557 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
568 568  
569 -* (((
570 -=== ** If the URL does not jump properly.** ===
571 -)))
572 572  
573 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
574 574  
575 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
561 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
576 576  
577 577  
578 -* (((
579 -=== ** How to install InfluxDB, Garfana.** ===
580 -)))
564 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
581 581  
582 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
566 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
583 583  
568 +[[image:image-20230321092456-1.png]]
584 584  
585 -* (((
586 -=== ** How to upgrade the gateway node.js to the latest version.** ===
587 -)))
588 588  
589 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
590 590  
572 +== 4.2 Application Server ~-~- Node-Red ==
591 591  
592 -* (((
593 -=== ** How to batch register device on the built-in Chirpstack network server** ===
594 -)))
595 595  
596 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
575 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
597 597  
598 598  
599 -* (((
600 -=== ** Why my gateway is not Chirpstack?** ===
601 -)))
578 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
602 602  
603 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
604 604  
581 +[[image:image-20220725172124-3.png||height="610" width="843"]]
605 605  
606 -* (((
607 -=== ** How to disable the built-in server** ===
608 -)))
609 609  
584 +
585 +=== **Using Node-Red, InfluxDB and Grafana** ===
586 +
587 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
588 +
589 +
590 +the users can refer to this link to install them.
591 +
592 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
593 +
594 +
595 +=== **Upgrade the node.js** ===
596 +
597 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
598 +
599 +
600 +the users can refer to this link to upgrade them.
601 +
602 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
603 +
604 +
605 +== 4.3 How to disable the built-in server ==
606 +
607 +
608 +Use the following commands to start and stop the TTNv3 service:
609 +
610 610  (% class="box infomessage" %)
611 611  (((
612 -Use the following commands to start and stop the TTNv3 service:**     **
613 -
614 614  **# start**
615 615  systemctl start ttnstack
616 616  
... ... @@ -624,10 +624,10 @@
624 624  systemctl disable ttnstack
625 625  )))
626 626  
627 -(% class="box infomessage" %)
628 -(((
629 629  Use the following commands to start and stop the Node-Red service:
630 630  
627 +(% class="box infomessage" %)
628 +(((
631 631  **# start**
632 632  systemctl start nodered
633 633  
... ... @@ -642,40 +642,36 @@
642 642  )))
643 643  
644 644  
645 -* (((
646 -=== ** How to choose the Chirpstack server frequency SubBand** ===
647 -)))
643 +== 4.4 How to use ChirpStack on LPS8-V2 ==
648 648  
649 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
650 650  
651 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
646 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
652 652  
653 -[[image:image-20230602140406-3.png||height="480" width="918"]]
648 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
654 654  
655 655  
656 -When the configuration is complete, click** "Save&Apply"**.
651 +=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
657 657  
658 658  
659 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
654 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
660 660  
661 -[[image:image-20230602143122-4.png||height="511" width="983"]]
656 +If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
662 662  
658 +[[image:image-20230602140406-3.png||height="480" width="918"]]
663 663  
664 -= 5. Watch Dog =
665 665  
661 +When the configuration is complete, click** "Save&Apply"**.
666 666  
667 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
668 668  
669 -The uses can be via the below method to enable Watch Dog:
664 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
670 670  
671 -(% class="box infomessage" %)
672 -(((
673 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
674 -)))
666 +[[image:image-20230602143122-4.png||height="511" width="983"]]
675 675  
676 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
677 677  
669 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
678 678  
671 +
672 +
679 679  = 6. How users can access LPS8-V2 using serial USB =
680 680  
681 681  
... ... @@ -729,6 +729,7 @@
729 729  
730 730  1). Using the Linux command to upgrade the system
731 731  
726 +
732 732  (% class="box infomessage" %)
733 733  (((
734 734  **apt update && apt install *dragino***
... ... @@ -737,11 +737,13 @@
737 737  
738 738  2). Upgrade the system via the Web page button of "Manual Update"
739 739  
740 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
741 741  
736 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
737 +
742 742  [[image:image-20230607093849-1.png]]
743 743  
744 744  
741 +
745 745  = 8. FAQ =
746 746  
747 747  == 8.1 How to change Hostname ==
... ... @@ -764,159 +764,58 @@
764 764  
765 765  Migrate guide:
766 766  
767 -To stabilize the completion of the migration, The users can migrate in one of the following ways
764 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
768 768  
769 -**Method 1. Using the Linux shell, **
766 +**2. On the Server ~-~-> Network Server interface, click "Management"**
770 770  
771 -**Method 2. Flash a new image with the Chirpstack**
768 +[[image:image-20230616162454-1.png]]
772 772  
773 773  
774 -=== Method 1: Using the Linux shell ===
771 +**3. Click "Migrate-Chirpstack"**
775 775  
776 -(% class="box infomessage" %)
777 -(((
778 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
779 -)))
773 +[[image:image-20230616162742-2.png]]
780 780  
781 781  
782 -=== Method 2: Flash a new image ===
776 +**4. Strat Install **
783 783  
784 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
785 785  
779 +Click start Install and wait until the migration succeeds
786 786  
787 -== 8.3 How to reduce the 4g data consumed ==
781 +[[image:image-20230616162934-3.png]]
788 788  
789 789  
790 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
784 +**5.Migration complete check result**
791 791  
792 -[[image:image-20230719100239-1.png||height="724" width="994"]]
786 +[[image:image-20230616174526-4.png||height="706" width="983"]]
793 793  
794 794  
795 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
789 +[[image:image-20230616180004-9.png]]
796 796  
797 -[[image:image-20230719100332-2.png]]
798 798  
792 +== 8.3 How to reduce the 4g data consumed ==
799 799  
800 -3. Disable the auto-update:
794 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
801 801  
802 -[[image:image-20230719100419-3.png||height="458" width="995"]]
803 803  
797 +[[image:image-20230719100239-1.png||height="724" width="994"]]
804 804  
805 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
806 806  
800 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
807 807  
808 -(% class="box infomessage" %)
809 -(((
810 -apt update && apt install helium-gateway
811 -)))
802 +[[image:image-20230719100332-2.png]]
812 812  
804 +3. Disable the auto-update:
813 813  
814 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
806 +[[image:image-20230719100419-3.png||height="458" width="995"]]
815 815  
816 816  
817 -By default, the LPS8v2's built-in server is ChirpStack v4,
818 818  
819 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
820 820  
821 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
822 -
823 -
824 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
825 -
826 -
827 -== 8.6 How do I view gateway logs ==
828 -
829 -=== 8.6.1 LoRaWAN Log: ===
830 -
831 -
832 -==== Semtech UDP Log : ====
833 -
834 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
835 -
836 -[[image:image-20231017112115-2.png||height="611" width="821"]]
837 -
838 -
839 -==== Station Log: ====
840 -
841 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
842 -
843 -[[image:image-20231017111606-1.png||height="622" width="821"]]
844 -
845 -
846 -=== 8.6.2  4G Log ===
847 -
848 -
849 -The user needs to access the Linux console of the gateway and enter the following command:
850 -
851 -(% class="box infomessage" %)
852 -(((
853 -cat /var/log/qmilog.txt
854 -)))
855 -
856 -[[image:image-20231017114417-3.png||height="543" width="679"]]
857 -
858 -
859 -=== 8.6.3 Dmesg Log ===
860 -
861 -
862 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
863 -
864 -[[image:image-20231017115330-5.png||height="565" width="740"]]
865 -
866 -
867 -=== 8.6.4 Record Log ===
868 -
869 -
870 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
871 -
872 -[[image:image-20231017115124-4.png||height="215" width="880"]]
873 -
874 -
875 -=== 8.6.5 View gateway logs via Linux Command ===
876 -
877 -
878 -**Semtech UDP Log :**
879 -
880 -(% class="box infomessage" %)
881 -(((
882 -**journalctl -u draginofwd -f**
883 -)))
884 -
885 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
886 -
887 -
888 -**Station Log:**
889 -
890 -(% class="box infomessage" %)
891 -(((
892 -**tail -f /var/log/station.log **
893 -)))
894 -
895 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
896 -
897 -
898 -**Dmesg Log:**
899 -
900 -(% class="box infomessage" %)
901 -(((
902 -**dmesg**
903 -)))
904 -
905 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
906 -
907 -
908 -== 8.7 DIN Mount Reference: ==
909 -
910 -
911 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
912 -
913 -[[image:image-20240318095617-2.png]]
914 -
915 -
916 916  = 9. Trouble Shooting =
917 917  
918 918  == 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
919 919  
815 +
920 920  [[image:image-20220920135918-1.png]]
921 921  
922 922  
... ... @@ -946,7 +946,7 @@
946 946  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
947 947  
948 948  
949 -**~1. Check whether the configuration is correct**
845 +**1.Check whether the configuration is correct**
950 950  
951 951  Run the CMD command to ipconfig and ping 172.31.255.254.
952 952  
... ... @@ -971,36 +971,6 @@
971 971  [[image:image-20230527090555-3.png||height="660" width="832"]]
972 972  
973 973  
974 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
975 -
976 -
977 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
978 -
979 -(% class="box infomessage" %)
980 -(((
981 -apt update && apt install *dragino*
982 -
983 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
984 -)))
985 -
986 -
987 -== 9.6  How to reset the built-in server ==
988 -
989 -
990 -**1) Build-in The Things Network**
991 -
992 -Refer to this link to delete the Built-in server's device.
993 -
994 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
995 -
996 -
997 -**2) Build-in Chirpstack**
998 -
999 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1000 -
1001 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1002 -
1003 -
1004 1004  = (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1005 1005  
1006 1006  
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0