Last modified by Kilight Cao on 2025/02/08 14:05
<
From version < 297.2 >
edited by Xiaoling
on 2024/03/18 16:09
To version < 117.1 >
edited by Kilight Cao
on 2022/12/28 11:03
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,16 +57,14 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
69 +== **1.3 Features** ==
70 70  
71 71  
72 72  * Open Source Debian system
... ... @@ -81,90 +81,72 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
87 +== **1.4 Block Diagram** ==
88 88  
89 89  
90 -LPS8-V2 has totally four LEDs, They are:
91 91  
91 +== **1.5 LED Indicators** ==
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
94 +LPS8-V2 has totally four LEDs, They are:
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
97 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
99 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
101 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
103 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
106 106  
105 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
107 107  
108 -== 1.5 Button Intruction ==
107 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
109 109  
109 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
110 110  
111 -LPS8-V2 has a black toggle button, which is:
112 112  
113 113  
114 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
113 +== **1.6 Button Intruction** ==
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
117 117  
116 +LPS8-V2 has a black toggle button, which is:
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
119 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
122 122  
121 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 125  
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
124 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
127 127  
126 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
128 128  
129 -When the gateway restores the factory settings is complete,
130 130  
131 -The WiFi configuration will enable WiFi Access Point by default.
132 132  
133 -The other configuration will be restored to the default configuration.
130 += **2. Quick Start** =
134 134  
135 135  
136 -= 2. Quick Start =
137 -
138 -
139 139  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
140 140  
141 141  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
142 142  
143 143  
144 -== 2.1 Access and Configure LPS8-V2 ==
145 145  
146 -=== 2.1.1 Find IP address of LPS8-V2 ===
139 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
147 147  
148 148  
149 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
142 +== **2.1.1 connect the network.** ==
150 150  
151 151  
152 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
145 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
153 153  
154 -(% style="background-color:yellow" %)**dragino+dragino**
155 155  
156 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
157 -
158 -[[image:image-20230527084515-1.png]]
159 -
160 -[[image:image-20230527085250-2.png||height="495" width="284"]]
161 -
162 -
163 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 -
165 -
166 166  (((
167 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
149 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
168 168  )))
169 169  
170 170  (((
... ... @@ -174,39 +174,10 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
177 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
178 178  
160 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
179 179  
180 -[[image:image-20230107084650-2.png||height="310" width="839"]]
181 181  
182 -
183 -(% style="color:blue" %)**Steps to connect via fallback IP:**
184 -
185 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
186 -
187 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
188 -
189 -
190 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
191 -
192 -
193 -As in the below photo:
194 -
195 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
196 -
197 -
198 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 -
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 -
202 -
203 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
204 -
205 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
206 -
207 -
208 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 -
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
211 211  
212 212  
... ... @@ -226,104 +226,13 @@
226 226  [[image:image-20220622102901-8.png||height="476" width="938"]]
227 227  
228 228  
229 -=== 2.1.2 Access Configure Web UI ===
230 230  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
231 231  
232 -**Web Interface**
233 233  
234 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
235 235  
236 236  
237 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
238 -
239 -You will see the login interface of LPS8-V2 as shown below.
240 -
241 -The account details for Web Login are:
242 -
243 -(% style="color:blue" %)**User Name: root**
244 -
245 -(% style="color:blue" %)**Password:   dragino**
246 -
247 -[[image:image-20240318160845-1.png]]
248 -
249 -
250 -== 2.2  Typical Network Setup ==
251 -
252 -=== 2.2.1  Overview ===
253 -
254 -
255 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
256 -
257 -* **WAN Port Internet Mode**
258 -
259 -* **WiFi Client Mode**
260 -
261 -* **Cellular Mode**
262 -
263 -=== 2.2.2  Use WAN port to access Internet ===
264 -
265 -
266 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
267 -
268 -
269 -[[image:image-20230411100633-2.png||height="501" width="935"]]
270 -
271 -
272 -=== 2.2.3  Access the Internet as a WiFi Client ===
273 -
274 -
275 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
276 -
277 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
278 -
279 -[[image:image-20230411095739-1.png||height="264" width="691"]]
280 -
281 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
282 -
283 -
284 -=== 2.2.4  Use built-in 4G modem for internet access ===
285 -
286 -
287 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
288 -
289 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
290 -
291 -
292 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
293 -
294 -First, install the Micro SIM card as below direction
295 -
296 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
297 -
298 -
299 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
300 -
301 -
302 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
303 -
304 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
305 -
306 -
307 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 -
309 -
310 -=== 2.2.5  Check Internet connection ===
311 -
312 -
313 -In the **home** page, we can check the Internet connection.
314 -
315 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
316 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
317 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
318 -
319 -[[image:image-20230411101534-3.png||height="544" width="942"]]
320 -
321 -
322 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
323 -
324 -=== 2.3.1 Select your area frequency ===
325 -
326 -
327 327  (((
328 328  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
329 329  
... ... @@ -333,9 +333,10 @@
333 333  [[image:image-20220622103332-9.png||height="485" width="938"]]
334 334  
335 335  
336 -=== 2.3.2 Get the only gateway EUI ===
337 337  
199 +=== **2.2.2 Get the only gateway EUI** ===
338 338  
201 +
339 339  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
340 340  
341 341  
... ... @@ -357,9 +357,10 @@
357 357  [[image:image-20220622103956-12.png]]
358 358  
359 359  
360 -=== 2.3.3 Register the gateway to The Things Network ===
361 361  
224 +== **2.2.3 Register the gateway to The Things Network** ==
362 362  
226 +
363 363  **Login to The Things Network**
364 364  
365 365  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -373,30 +373,34 @@
373 373  **Get it online**
374 374  
375 375  
376 -= 3. Web Configure Pages =
377 377  
378 -== 3.1 Home ==
241 += **3. Web Configure Pages** =
379 379  
380 380  
381 -Shows the system running status:
244 +== **3.1 Home** ==
382 382  
246 +
247 +//Shows the system running status~://
248 +
383 383  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
384 384  
385 385  
386 -== 3.2 LoRa Settings ==
387 387  
388 -=== 3.2.1 LoRa ~-~-> LoRa ===
253 +== **3.2 LoRa Settings** ==
389 389  
390 390  
391 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
256 +=== **3.2.1 LoRa ~-~-> LoRa** ===
392 392  
393 -Different LPS8v2 hardware versions can support different frequency ranges:
394 394  
395 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
396 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
259 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
397 397  
261 +//Different LPS8v2 hardware versions can support different frequency ranges~://
262 +
263 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
264 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
265 +
398 398  (% class="wikigeneratedid" %)
399 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
267 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
400 400  
401 401  
402 402  (% class="wikigeneratedid" %)
... ... @@ -408,23 +408,26 @@
408 408  )))
409 409  
410 410  
411 -== 3.3 LoRaWAN Settings ==
412 412  
413 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
280 +== **3.3 LoRaWAN Settings** ==
414 414  
415 415  
416 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
283 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
417 417  
418 418  
286 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
287 +
288 +
419 419  [[image:image-20220616111932-2.png||height="516" width="672"]]
420 420  
421 421  
422 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
423 423  
293 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
424 424  
425 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
426 426  
296 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
427 427  
298 +
428 428  [[image:image-20220616113246-3.png||height="396" width="672"]]
429 429  
430 430  
... ... @@ -433,260 +433,127 @@
433 433  )))
434 434  
435 435  
436 -== 3.4 Network Settings ==
437 437  
438 -=== 3.4.1 Network ~-~-> WiFi ===
308 +== **3.4 Network Settings** ==
439 439  
440 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
441 441  
442 -[[image:image-20230619095946-1.png||height="332" width="827"]]
311 +=== **3.4.1 Network ~-~-> WiFi** ===
443 443  
444 444  
445 -=== 3.4.2 Network ~-~-> System Status ===
314 +[[image:image-20220616114756-4.png||height="251" width="669"]]
446 446  
447 447  
448 -[[image:image-20220820134112-2.png||height="539" width="668"]]
449 449  
318 +=== **3.4.2 Network ~-~-> System Status** ===
450 450  
451 -=== 3.4.3 Network ~-~-> Network ===
452 452  
321 +[[image:image-20220820134112-2.png||height="539" width="668"]]
453 453  
454 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
455 455  
456 -[[image:image-20230214093657-2.png||height="333" width="858"]]
457 457  
325 +=== **3.4.3 Network ~-~-> Firewall** ===
458 458  
459 -=== 3.4.4 Network ~-~-> Cellular ===
460 460  
328 +[[image:image-20220616115351-6.png||height="244" width="661"]]
461 461  
462 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
463 463  
464 -(% style="color:red" %)**Note: APN cannot be empty.**
465 465  
466 -[[image:image-20230228115126-1.png]]
332 +== **3.5 System** ==
467 467  
468 468  
469 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
335 +=== **3.5.1  System ~-~-> System Overview** ===
470 470  
471 -[[image:image-20230228115535-2.png||height="478" width="888"]]
472 472  
473 -
474 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
475 -
476 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
477 -
478 -
479 -== 3.5 System ==
480 -
481 -=== 3.5.1 System ~-~-> System Overview ===
482 -
483 -
484 484  Shows the system info:
485 485  
486 -[[image:image-20231031162854-1.png]]
340 +[[image:image-20220917144512-5.png||height="618" width="853"]]
487 487  
488 488  
489 -=== 3.5.2 System ~-~-> System General ===
490 490  
344 +=== **3.5.2 System ~-~-> Backup/Restore** ===
491 491  
492 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
493 493  
494 -In addition, Users can customize the FallBack IP address.
347 +[[image:image-20220917144725-6.png||height="208" width="869"]]
495 495  
496 -[[image:image-20230214094058-3.png]]
497 497  
498 498  
499 -=== 3.5.3 System ~-~-> Backup/Restore ===
351 += **4. Build-in Server** =
500 500  
501 501  
502 -[[image:image-20231031162927-2.png]]
354 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
503 503  
504 -=== 3.5.4 System ~-~-> Reboot / Reset ===
505 505  
506 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
357 +[[image:image-20220820115644-1.png||height="217" width="778"]]
507 507  
508 -ETH LED will SOLID BULE Until the restore is finished.
509 509  
510 -When the gateway restores the factory settings is complete,
360 +(% style="color:red" %)**Note:**
511 511  
512 -The WiFi configuration will enable WiFi Access Point by default.
362 + **Path**: System ~-~-> Built-in Server
513 513  
514 -The other configuration will be restored to the default configuration.
515 515  
516 -[[image:image-20240203172853-1.png||height="365" width="901"]]
365 +**Troubleshooting:**
517 517  
518 518  
519 -=== 3.5.5 System ~-~-> Remoteit ===
368 +**~ 1. URL does not jump properly**
520 520  
370 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
521 521  
522 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
372 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
523 523  
524 524  
525 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
526 526  
527 -[[image:image-20221230092303-2.png]]
376 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
528 528  
529 529  
530 -=== 3.5.6 System ~-~-> Package Management ===
379 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
531 531  
381 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
532 532  
533 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
534 534  
535 -[[image:image-20230214094316-4.png]]
384 +Login account:
536 536  
386 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
537 537  
538 -= 4. Build-in Server =
388 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
539 539  
540 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
541 541  
391 +[[image:image-20220725171719-1.png||height="570" width="769"]]
542 542  
543 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
544 544  
545 -[[image:image-20231106180816-4.png||height="416" width="896"]]
546 546  
547 -[[image:image-20231201165904-1.png||height="466" width="899"]]
395 +== **4.2 Application Server ~-~- Node-Red** ==
548 548  
549 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
550 550  
551 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
398 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
552 552  
553 553  
401 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
554 554  
555 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
556 556  
404 +[[image:image-20220725172124-3.png||height="610" width="843"]]
557 557  
558 -[[image:image-20230616175558-7.png||height="362" width="894"]]
559 559  
560 -[[image:image-20231201170355-2.png||height="536" width="899"]]
561 561  
562 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
408 +=== **Using Node-Red, InfluxDB and Grafana,** ===
563 563  
410 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
564 564  
565 565  
566 -== **3). Troubleshooting:** ==
413 +the users can refer to this link to install them.
567 567  
415 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
568 568  
569 -* (((
570 -=== ** If the URL does not jump properly.** ===
571 -)))
572 572  
573 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
418 += **5. How users can access LPS8v2 using serial USB** =
574 574  
575 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
576 576  
421 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
577 577  
578 -* (((
579 -=== ** How to install InfluxDB, Garfana.** ===
580 -)))
581 581  
582 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
424 +Port 1 of the UART on the LPS8v2 is GND
583 583  
584 -
585 -* (((
586 -=== ** How to upgrade the gateway node.js to the latest version.** ===
587 -)))
588 -
589 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
590 -
591 -
592 -* (((
593 -=== ** How to batch register device on the built-in Chirpstack network server** ===
594 -)))
595 -
596 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
597 -
598 -
599 -* (((
600 -=== ** Why my gateway is not Chirpstack?** ===
601 -)))
602 -
603 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
604 -
605 -
606 -* (((
607 -=== ** How to disable the built-in server** ===
608 -)))
609 -
610 610  (% class="box infomessage" %)
611 611  (((
612 -Use the following commands to start and stop the TTNv3 service:**     **
613 -
614 -**# start**
615 -systemctl start ttnstack
616 -
617 -**# stop**
618 -systemctl stop ttnstack
619 -
620 -**# enable**
621 -systemctl enable ttnstack
622 -
623 -**#disable**
624 -systemctl disable ttnstack
625 -)))
626 -
627 -(% class="box infomessage" %)
628 -(((
629 -Use the following commands to start and stop the Node-Red service:
630 -
631 -**# start**
632 -systemctl start nodered
633 -
634 -**# stop**
635 -systemctl stop nodered
636 -
637 -**# enable**
638 -systemctl enable nodered
639 -
640 -**#disable**
641 -systemctl disable nodered
642 -)))
643 -
644 -
645 -* (((
646 -=== ** How to choose the Chirpstack server frequency SubBand** ===
647 -)))
648 -
649 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
650 -
651 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
652 -
653 -[[image:image-20230602140406-3.png||height="480" width="918"]]
654 -
655 -
656 -When the configuration is complete, click** "Save&Apply"**.
657 -
658 -
659 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
660 -
661 -[[image:image-20230602143122-4.png||height="511" width="983"]]
662 -
663 -
664 -= 5. Watch Dog =
665 -
666 -
667 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
668 -
669 -The uses can be via the below method to enable Watch Dog:
670 -
671 -
672 -(% class="box infomessage" %)
673 -(((
674 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
675 -)))
676 -
677 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
678 -
679 -
680 -
681 -= 6. How users can access LPS8-V2 using serial USB =
682 -
683 -
684 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
685 -
686 -Port 1 of the UART on the LPS8-V2 is GND
687 -
688 -(% class="box infomessage" %)
689 -(((
690 690  **TXD  <~-~--> UART RXD (Gray line)**
691 691  
692 692  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -694,10 +694,13 @@
694 694  **GND <~-~--> GND (Black line)**
695 695  )))
696 696  
435 +
697 697  **LPS8v2 UART connection photo**
698 698  
699 -[[image:image-20230421094319-2.png||height="351" width="392"]]
438 +[[image:image-20220804163015-1.png||height="621" width="466"]]
700 700  
440 +
441 +
701 701  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
702 702  
703 703  
... ... @@ -707,219 +707,116 @@
707 707  [[image:image-20220804164747-2.png||height="622" width="594"]]
708 708  
709 709  
710 -= 7. OTA System Update =
711 711  
452 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
712 712  
713 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
714 714  
455 +== **Step 1: Configure Frequency Band** ==
715 715  
716 -== 7.1 Auto-update method ==
717 717  
458 +//Each country has a requirement for frequency region. Choose the right one for your area.//
718 718  
719 -The default, each gateway will enable the auto-update function.
460 +[[image:image-20220905164308-1.png]]
720 720  
721 -this function will be triggered every boot and every midnight.
722 722  
723 723  
724 -Users can enable/disable it via Web Page
464 +== **Step 2: Configure the forward address** ==
725 725  
726 -[[image:image-20230607094447-2.png]]
727 727  
467 +**Select one of the servers to configure.**
728 728  
729 -== 7.2 Manual upgrade method ==
469 +**For example:**
730 730  
471 +[[image:image-20220905164847-2.png]]
731 731  
732 -1). Using the Linux command to upgrade the system
733 733  
734 734  
735 -(% class="box infomessage" %)
736 -(((
737 -**apt update && apt install *dragino***
738 -)))
475 +== **Step 3: Download and Install the Helium-gateway-rs** ==
739 739  
740 740  
741 -2). Upgrade the system via the Web page button of "Manual Update"
478 +**Access the gateway CLI via SSH.**
742 742  
480 +[[image:image-20220905165222-3.png]]
743 743  
744 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
745 745  
746 -[[image:image-20230607093849-1.png]]
483 +**Download gateway-rs.**
747 747  
485 +[[image:image-20220905165715-5.png]]
748 748  
749 -
750 -= 8. FAQ =
751 -
752 -== 8.1 How to change Hostname ==
753 -
754 -
755 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
756 -
757 757  (% class="box infomessage" %)
758 758  (((
759 -hostnamectl set-hostname dragino-123456
489 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
760 760  )))
761 761  
762 -[[image:image-20230517102429-1.png]]
763 763  
764 -After the configuration is complete, run "reboot" to restart the gateway.
493 +**Install gateway-rs.**
765 765  
495 +[[image:image-20220905165917-7.png]]
766 766  
767 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
768 -
769 -
770 -Migrate guide:
771 -
772 -To stabilize the completion of the migration, The users can migrate in one of the following ways
773 -
774 -**Method 1. Using the Linux shell, **
775 -
776 -**Method 2. Flash a new image with the Chirpstack**
777 -
778 -
779 -
780 -=== Method 1: Using the Linux shell ===
781 -
782 782  (% class="box infomessage" %)
783 783  (((
784 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
499 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
785 785  )))
786 786  
787 787  
503 +**Modify configuration.**
788 788  
789 -=== Method 2: Flash a new image ===
790 790  
791 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
506 +[[image:image-20220905173847-12.png]]
792 792  
793 793  
794 -
795 -== 8.3 How to reduce the 4g data consumed ==
796 -
797 -
798 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
799 -
800 -[[image:image-20230719100239-1.png||height="724" width="994"]]
801 -
802 -
803 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
804 -
805 -[[image:image-20230719100332-2.png]]
806 -
807 -
808 -3. Disable the auto-update:
809 -
810 -[[image:image-20230719100419-3.png||height="458" width="995"]]
811 -
812 -
813 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
814 -
815 -
816 816  (% class="box infomessage" %)
817 817  (((
818 -apt update && apt install helium-gateway
511 +**region=<Enter regional parameters> \
512 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
513 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
819 819  )))
820 820  
821 821  
822 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
517 +**Restart the helium_gateway**
823 823  
519 +[[image:image-20220905170920-9.png]]
824 824  
825 -By default, the LPS8v2's built-in server is ChirpStack v4,
826 826  
827 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
828 -
829 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
830 -
831 -
832 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
833 -
834 -
835 -== 8.6 How do I view gateway logs ==
836 -
837 -=== 8.6.1 LoRaWAN Log: ===
838 -
839 -==== Semtech UDP Log : ====
840 -
841 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
842 -
843 -[[image:image-20231017112115-2.png||height="611" width="821"]]
844 -
845 -
846 -==== Station Log: ====
847 -
848 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
849 -
850 -[[image:image-20231017111606-1.png||height="622" width="821"]]
851 -
852 -
853 -=== 8.6.2  4G Log ===
854 -
855 -The user needs to access the Linux console of the gateway and enter the following command:
856 -
857 857  (% class="box infomessage" %)
858 858  (((
859 -cat /var/log/qmilog.txt
524 +**systemctl restart helium_gateway**
860 860  )))
861 861  
862 -[[image:image-20231017114417-3.png||height="543" width="679"]]
863 863  
528 +**Check the helium_gateway Log：**
864 864  
865 -=== 8.6.3 Dmesg Log ===
530 +[[image:image-20220905173952-13.png]]
866 866  
867 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
868 868  
869 -[[image:image-20231017115330-5.png||height="565" width="740"]]
870 -
871 -
872 -=== 8.6.4 Record Log ===
873 -
874 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
875 -
876 -[[image:image-20231017115124-4.png||height="215" width="880"]]
877 -
878 -
879 -=== 8.6.5 View gateway logs via Linux Command ===
880 -
881 -**Semtech UDP Log :**
882 -
883 883  (% class="box infomessage" %)
884 884  (((
885 -**journalctl -u draginofwd -f**
535 +**journalctl -u helium_gateway -f**
886 886  )))
887 887  
888 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
889 889  
539 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
890 890  
891 -**Station Log:**
541 +where the helium gateway log is shown:
892 892  
893 -(% class="box infomessage" %)
894 -(((
895 -**tail -f /var/log/station.log **
896 -)))
543 +[[image:image-20220905174534-14.png]]
897 897  
898 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
899 899  
546 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
900 900  
901 -**Dmesg Log:**
902 902  
903 -(% class="box infomessage" %)
904 -(((
905 -**dmesg**
906 -)))
549 += **7. OTA System Update** =
907 907  
908 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
909 909  
552 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
910 910  
911 -== 8.7 DIN Mount Reference: ==
912 912  
913 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
555 += **8. Trouble Shooting** =
914 914  
915 -[[image:image-20240318095617-2.png]]
916 916  
558 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
917 917  
918 -= 9. Trouble Shooting =
919 919  
920 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
921 -
922 -
923 923  [[image:image-20220920135918-1.png]]
924 924  
925 925  
... ... @@ -935,87 +935,21 @@
935 935  [[image:image-20220920141936-2.png]]
936 936  
937 937  
938 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
939 939  
940 940  
941 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
578 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**9. Supports**(%%) =
942 942  
943 -[[image:image-20230508171607-1.png]]
944 944  
945 -
946 -== 9.3  Fallback IP does not work, how can users check ==
947 -
948 -
949 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
950 -
951 -
952 -**1.Check whether the configuration is correct**
953 -
954 -Run the CMD command to ipconfig and ping 172.31.255.254.
955 -
956 -If this fails, the user needs to reconfigure.
957 -
958 -[[image:image-20230413170224-3.png||height="433" width="707"]]
959 -
960 -[[image:image-20230413170246-4.png]]
961 -
962 -
963 -**2. Check whether the firewall is disabled**
964 -
965 -If the firewall is not down, this will affect access to the gateway.
966 -
967 -
968 -== 9.4  Click "Manual_Update", why there is no response? ==
969 -
970 -
971 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
972 -
973 -
974 -[[image:image-20230527090555-3.png||height="660" width="832"]]
975 -
976 -
977 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
978 -
979 -
980 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
981 -
982 -
983 -(% class="box infomessage" %)
984 984  (((
985 -apt update && apt install *dragino*
986 -
987 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
582 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
988 988  )))
989 989  
990 -
991 -== 9.6  How to reset the built-in server ==
992 -
993 -
994 -**1) Build-in The Things Network**
995 -
996 -Refer to this link to delete the Built-in server's device.
997 -
998 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
999 -
1000 -
1001 -**2) Build-in Chirpstack**
1002 -
1003 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1004 -
1005 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1006 -
1007 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1008 -
1009 -
1010 1010  (((
1011 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1012 -)))
586 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
1013 1013  
1014 -(((
1015 -With your question as detailed as possible. We will reply and help you in the shortest.
1016 1016  
1017 1017  
1018 -= 11. Reference =
590 += **10. Reference** =
1019 1019  
1020 1020  
1021 1021  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -1024,7 +1024,7 @@
1024 1024  
1025 1025  )))
1026 1026  
1027 -= 12. Order Info =
599 += **11. Order Info** =
1028 1028  
1029 1029  
1030 1030  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1032,33 +1032,26 @@
1032 1032  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
1033 1033  
1034 1034  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1035 -
1036 1036  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1037 -
1038 1038  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1039 -
1040 1040  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1041 -
1042 1042  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1043 -
1044 1044  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1045 1045  
1046 1046  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
1047 1047  
1048 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
615 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
616 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
617 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
618 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1049 1049  
1050 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1051 -
1052 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1053 -
1054 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1055 -
1056 1056  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1057 1057  
1058 1058  
1059 -= 13. Manufacturer Info =
1060 1060  
624 += **12. Manufacturer Info** =
1061 1061  
626 +
1062 1062  **Shenzhen Dragino Technology Development co. LTD**
1063 1063  
1064 1064  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -1066,9 +1066,10 @@
1066 1066  LongCheng Street, LongGang District ; Shenzhen 518116,China
1067 1067  
1068 1068  
1069 -= 14. FCC Warning =
1070 1070  
635 += **13. FCC Warning** =
1071 1071  
637 +
1072 1072  (((
1073 1073  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1074 1074  )))
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0