Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 296.1 >
edited by Edwin Chen
on 2024/03/18 09:57
To version < 314.1 >
edited by Kilight Cao
on 2024/05/18 16:22
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Kilight
Content
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== 1.1 What is LPS8v2 ==
21 +== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
22 22  
23 23  
24 24  (((
... ... @@ -96,11 +96,11 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
103 + ✓**  SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
... ... @@ -132,6 +132,7 @@
132 132  
133 133  The other configuration will be restored to the default configuration.
134 134  
135 +
135 135  = 2. Quick Start =
136 136  
137 137  
... ... @@ -159,7 +159,6 @@
159 159  [[image:image-20230527085250-2.png||height="495" width="284"]]
160 160  
161 161  
162 -
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,7 +174,6 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
177 -
178 178  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
179 179  
180 180  
... ... @@ -206,7 +206,6 @@
206 206  [[image:image-20230111094247-2.png||height="619" width="1250"]]
207 207  
208 208  
209 -
210 210  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
211 211  
212 212  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -246,7 +246,7 @@
246 246  
247 247  (% style="color:blue" %)**Password:   dragino**
248 248  
249 -[[image:image-20230106153501-1.png||height="367" width="894"]]
247 +[[image:image-20240318160845-1.png]]
250 250  
251 251  
252 252  == 2.2  Typical Network Setup ==
... ... @@ -309,6 +309,9 @@
309 309  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
310 310  
311 311  
310 +**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 +
312 +
312 312  === 2.2.5  Check Internet connection ===
313 313  
314 314  
... ... @@ -537,6 +537,38 @@
537 537  [[image:image-20230214094316-4.png]]
538 538  
539 539  
541 +== 3.5 Logread ==
542 +
543 +=== 3.5.1 LoRa Log ===
544 +
545 +
546 +In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
547 +
548 +[[image:image-20240416112509-1.png]]
549 +
550 +
551 +=== 3.5.2 Gateway Traffic ===
552 +
553 +In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
554 +
555 +[[image:image-20240416112618-2.png||height="705" width="1122"]]
556 +
557 +
558 +=== 3.5.3 System Log ===
559 +
560 +In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
561 +
562 +[[image:image-20240416112649-3.png||height="820" width="1122"]]
563 +
564 +
565 +=== 3.5.4 Record Log ===
566 +
567 +In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
568 +
569 +[[image:image-20240416112712-4.png||height="319" width="1128"]]
570 +
571 +
572 +
540 540  = 4. Build-in Server =
541 541  
542 542  After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
... ... @@ -670,7 +670,6 @@
670 670  
671 671  The uses can be via the below method to enable Watch Dog:
672 672  
673 -
674 674  (% class="box infomessage" %)
675 675  (((
676 676  wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
... ... @@ -679,7 +679,6 @@
679 679  [[image:image-20231124113209-1.png||height="470" width="1157"]]
680 680  
681 681  
682 -
683 683  = 6. How users can access LPS8-V2 using serial USB =
684 684  
685 685  
... ... @@ -733,7 +733,6 @@
733 733  
734 734  1). Using the Linux command to upgrade the system
735 735  
736 -
737 737  (% class="box infomessage" %)
738 738  (((
739 739  **apt update && apt install *dragino***
... ... @@ -742,18 +742,192 @@
742 742  
743 743  2). Upgrade the system via the Web page button of "Manual Update"
744 744  
775 +(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
745 745  
746 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
747 -
748 748  [[image:image-20230607093849-1.png]]
749 749  
750 750  
780 +(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
781 += 8. More Services =
751 751  
752 -= 8. FAQ =
783 +== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)8.1 NTP Service/Time Synchronization(%%) ==
753 753  
754 -== 8.1 How to change Hostname ==
785 +The gateway time sync service is provided by chrony service
755 755  
756 756  
788 +=== 1). Modify the NTP server address: ===
789 +
790 +(% class="box infomessage" %)
791 +(((
792 +Configuration file path:  /etc/chrony/chrony.conf
793 +)))
794 +
795 +
796 +=== 2). Start/Stop/Enable/Disable NTP service: ===
797 +
798 +(% class="box infomessage" %)
799 +(((
800 +systemctl start chrony
801 +\\systemctl stop chrony
802 +\\systemctl disable chrony
803 +\\systemctl enable chrony
804 +)))
805 +
806 +
807 +== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)8.2 How to connect the helium blockchain as a Data-only hotspot(%%) ==
808 +
809 +
810 +(% class="box infomessage" %)
811 +(((
812 +(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
813 +apt update && apt install helium-gateway
814 +)))
815 +
816 +
817 +(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
818 += 9. More features =
819 +
820 +(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
821 +== 9.1 How does the gateway connect to Chirpstack via MQTT Forwarder ==
822 +
823 +
824 +ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
825 +
826 +
827 +(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
828 +=== 9.1.1 Configure Packet Forwarder ===
829 +
830 +In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
831 +
832 +(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
833 +By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
834 +
835 +* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
836 +* Configure the following settings:
837 +** **Service Provider:** //Custom / Private LoRaWAN//
838 +** **Server Address:** localhost
839 +** **Uplink Port:** 1700
840 +** **Downlink Port:** 1700
841 +* Click **Save & Apply**
842 +
843 +[[image:image-20240518145929-2.png||height="652" width="727"]]
844 +
845 +
846 +(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
847 +=== 9.1.2 Install ChirpStack MQTT Forwarder ===
848 +
849 +==== ====
850 +
851 +(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
852 +(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
853 +
854 +First you must login into the gateway using SSH:
855 +
856 +(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
857 +(((
858 +ssh root@GATEWAY-IP-ADDRESS
859 +)))
860 +
861 +(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
862 +The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
863 +
864 +
865 +(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
866 +(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
867 +
868 +(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
869 +Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
870 +
871 +(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
872 +(((
873 +cd /tmp
874 +wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
875 +)))
876 +
877 +
878 +(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
879 +(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
880 +
881 +Use the dpkg package-manager to install the downloaded package. Example:
882 +
883 +(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
884 +(((
885 +dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
886 +)))
887 +
888 +[[image:image-20240518152148-4.png]]
889 +
890 +
891 +(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
892 +**Configuration**
893 +
894 +To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
895 +
896 +(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
897 +This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
898 +
899 +
900 +**ChirpStack MQTT Forwarder Setting:**
901 +
902 +(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
903 +(((
904 +topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
905 +
906 +server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
907 +)))
908 +
909 +username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
910 +
911 +
912 +Use commands to modify configuration files:
913 +
914 +(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
915 +(((
916 +vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
917 +)))
918 +
919 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
920 +
921 +
922 +**(Re)start and stop commands**
923 +
924 +Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
925 +
926 +(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
927 +(((
928 +# start
929 +
930 +(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
931 +systemctl start chirpstack-mqtt-forwarder
932 +
933 +# stop
934 +
935 +systemctl stop chirpstack-mqtt-forwarder
936 +
937 +# restart
938 +
939 +systemctl restart chirpstack-mqtt-forwarder
940 +)))
941 +
942 +(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
943 +(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
944 +
945 +
946 +**Check result**
947 +
948 +(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
949 +Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
950 +
951 +[[image:image-20240518154223-5.png]]
952 +
953 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
954 +
955 +
956 += (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10. FAQ(%%) =
957 +
958 +== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)10.1 How to change Hostname(%%) ==
959 +
960 +
757 757  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
758 758  
759 759  (% class="box infomessage" %)
... ... @@ -766,7 +766,7 @@
766 766  After the configuration is complete, run "reboot" to restart the gateway.
767 767  
768 768  
769 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
973 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
770 770  
771 771  
772 772  Migrate guide:
... ... @@ -778,7 +778,6 @@
778 778  **Method 2. Flash a new image with the Chirpstack**
779 779  
780 780  
781 -
782 782  === Method 1: Using the Linux shell ===
783 783  
784 784  (% class="box infomessage" %)
... ... @@ -787,16 +787,14 @@
787 787  )))
788 788  
789 789  
790 -
791 791  === Method 2: Flash a new image ===
792 792  
793 793  Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
794 794  
795 795  
998 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
796 796  
797 -== 8.3 How to reduce the 4g data consumed ==
798 798  
799 -
800 800  1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
801 801  
802 802  [[image:image-20230719100239-1.png||height="724" width="994"]]
... ... @@ -812,18 +812,9 @@
812 812  [[image:image-20230719100419-3.png||height="458" width="995"]]
813 813  
814 814  
815 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
1016 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
816 816  
817 817  
818 -(% class="box infomessage" %)
819 -(((
820 -apt update && apt install helium-gateway
821 -)))
822 -
823 -
824 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
825 -
826 -
827 827  By default, the LPS8v2's built-in server is ChirpStack v4,
828 828  
829 829  If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
... ... @@ -834,10 +834,11 @@
834 834  Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
835 835  
836 836  
837 -== 8.6 How do I view gateway logs ==
1029 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %).6 How do I view gateway logs(%%) ==
838 838  
839 -=== 8.6.1 LoRaWAN Log: ===
1031 +=== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %).6.1 LoRaWAN Log:(%%) ===
840 840  
1033 +
841 841  ==== Semtech UDP Log : ====
842 842  
843 843  When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
... ... @@ -852,10 +852,11 @@
852 852  [[image:image-20231017111606-1.png||height="622" width="821"]]
853 853  
854 854  
855 -=== 8.6.2  4G Log ===
1048 +=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)9.6.2  4G Log(%%) ===
856 856  
857 -The user needs to access the Linux console of the gateway and enter the following command:
858 858  
1051 +User needs to access the Linux console of the gateway and enter the following command:
1052 +
859 859  (% class="box infomessage" %)
860 860  (((
861 861  cat /var/log/qmilog.txt
... ... @@ -864,22 +864,48 @@
864 864  [[image:image-20231017114417-3.png||height="543" width="679"]]
865 865  
866 866  
867 -=== 8.6.3 Dmesg Log ===
1061 +LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
868 868  
1063 +Below are some commands as reference:
1064 +
1065 +>Usage:  /usr/bin/quectel-CM [options]
1066 +> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
1067 +> -p pincode Verify sim card pin if sim card is locked
1068 +> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
1069 +> -f logfilename Save log message of this program to file
1070 +> -u usbmonlog filename  Save usbmon log to file
1071 +> -i interface Specify which network interface to setup data call when multi-modems exits
1072 +> -4 Setup IPv4 data call (default)
1073 +> -6 Setup IPv6 data call
1074 +> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
1075 +> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
1076 +> -b Enable network interface bridge function (default 0)
1077 +> -v Verbose log mode, for debug purpose.[Examples]
1078 +>Example 1: /usr/bin/quectel-CM
1079 +>Example 2: /usr/bin/quectel-CM -s 3gnet
1080 +>Example 3: /usr/bin/quectel-CM -s 3gnet -v
1081 +
1082 +
1083 +
1084 +=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)9.6.3 Dmesg Log(%%) ===
1085 +
1086 +
869 869  Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
870 870  
871 871  [[image:image-20231017115330-5.png||height="565" width="740"]]
872 872  
873 873  
874 -=== 8.6.4 Record Log ===
1092 +=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)9.6.4 Record Log(%%) ===
875 875  
1094 +
876 876  Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
877 877  
878 878  [[image:image-20231017115124-4.png||height="215" width="880"]]
879 879  
880 880  
881 -=== 8.6.5 View gateway logs via Linux Command ===
1100 +=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)9.6.5 View gateway logs via Linux Command(%%) ===
882 882  
1102 +
883 883  **Semtech UDP Log :**
884 884  
885 885  (% class="box infomessage" %)
... ... @@ -910,18 +910,20 @@
910 910  [[image:image-20231207145210-3.png||height="310" width="1021"]]
911 911  
912 912  
913 -== 8.7 DIN Mount Reference: ==
1133 +== (% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %)9.5 DIN Mount Reference:(%%) ==
914 914  
1135 +
915 915  [[image:image-20240318095605-1.jpeg||height="472" width="472"]]
916 916  
917 917  [[image:image-20240318095617-2.png]]
918 918  
919 919  
920 -= 9. Trouble Shooting =
921 921  
922 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
923 923  
1143 += (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)10. Trouble Shooting(%%) =
924 924  
1145 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1146 +
925 925  [[image:image-20220920135918-1.png]]
926 926  
927 927  
... ... @@ -937,7 +937,7 @@
937 937  [[image:image-20220920141936-2.png]]
938 938  
939 939  
940 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1162 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
941 941  
942 942  
943 943  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -945,13 +945,13 @@
945 945  [[image:image-20230508171607-1.png]]
946 946  
947 947  
948 -== 9.3  Fallback IP does not work, how can users check ==
1170 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
949 949  
950 950  
951 951  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
952 952  
953 953  
954 -**1.Check whether the configuration is correct**
1176 +**~1. Check whether the configuration is correct**
955 955  
956 956  Run the CMD command to ipconfig and ping 172.31.255.254.
957 957  
... ... @@ -967,7 +967,7 @@
967 967  If the firewall is not down, this will affect access to the gateway.
968 968  
969 969  
970 -== 9.4  Click "Manual_Update", why there is no response? ==
1192 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
971 971  
972 972  
973 973  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -976,12 +976,11 @@
976 976  [[image:image-20230527090555-3.png||height="660" width="832"]]
977 977  
978 978  
979 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
1201 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
980 980  
981 981  
982 982  Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
983 983  
984 -
985 985  (% class="box infomessage" %)
986 986  (((
987 987  apt update && apt install *dragino*
... ... @@ -990,7 +990,7 @@
990 990  )))
991 991  
992 992  
993 -== 9.6  How to reset the built-in server ==
1214 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
994 994  
995 995  
996 996  **1) Build-in The Things Network**
... ... @@ -1006,9 +1006,10 @@
1006 1006  
1007 1007  [[image:image-20231106180846-5.png||height="310" width="668"]]
1008 1008  
1009 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1010 1010  
1231 += (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1011 1011  
1233 +
1012 1012  (((
1013 1013  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1014 1014  )))
image-20240318160845-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +71.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0