Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 293.1 >
edited by Kilight Cao
on 2024/02/03 17:29
To version < 156.1 >
edited by Kilight Cao
on 2023/02/28 12:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,13 +57,11 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
63 +* Work Temperature: -20 ~~ 65°C
64 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 69  == 1.3 Features ==
... ... @@ -81,31 +81,35 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
82 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
85 +== 1.4 Block Diagram ==
88 88  
89 89  
88 +
89 +== 1.5 LED Indicators ==
90 +
91 +
90 90  LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
95 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
97 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
99 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
101 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
103 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
105 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
107 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
106 106  
107 107  
108 -== 1.5 Button Intruction ==
110 +== 1.6 Button Intruction ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -113,25 +113,14 @@
113 113  
114 114  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
118 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
121 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
123 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -When the gateway restores the factory settings is complete,
130 -
131 -The WiFi configuration will enable WiFi Access Point by default.
132 -
133 -The other configuration will be restored to the default configuration.
134 -
135 135  = 2. Quick Start =
136 136  
137 137  
... ... @@ -140,29 +140,14 @@
140 140  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
141 141  
142 142  
143 -== 2.1 Access and Configure LPS8-V2 ==
134 +== 2.1 Connects to the network and accesses the gateway Web UI ==
144 144  
145 -=== 2.1.1 Find IP address of LPS8-V2 ===
136 +== 2.1.1 connect the network ==
146 146  
147 147  
148 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
139 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
149 149  
150 150  
151 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
152 -
153 -(% style="background-color:yellow" %)**dragino+dragino**
154 -
155 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
156 -
157 -[[image:image-20230527084515-1.png]]
158 -
159 -[[image:image-20230527085250-2.png||height="495" width="284"]]
160 -
161 -
162 -
163 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 -
165 -
166 166  (((
167 167  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
168 168  )))
... ... @@ -174,10 +174,9 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
153 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
177 177  
178 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
179 179  
180 -
181 181  [[image:image-20230107084650-2.png||height="310" width="839"]]
182 182  
183 183  
... ... @@ -187,28 +187,20 @@
187 187  
188 188  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
189 189  
190 -
191 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
192 -
193 -
194 194  As in the below photo:
195 195  
196 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
167 +[[image:image-20230107085904-4.png||height="443" width="361"]]
197 197  
198 -
199 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
200 -
201 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
202 -
203 -
204 204  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
205 205  
171 +
206 206  [[image:image-20230111094247-2.png||height="619" width="1250"]]
207 207  
208 208  
209 209  
210 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
176 +=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
211 211  
178 +
212 212  [[image:image-20220622100542-2.png||height="369" width="1256"]]
213 213  
214 214  
... ... @@ -228,7 +228,7 @@
228 228  [[image:image-20220622102901-8.png||height="476" width="938"]]
229 229  
230 230  
231 -=== 2.1.2 Access Configure Web UI ===
198 +== 2.1.2 Access Configure Web UI ==
232 232  
233 233  
234 234  **Web Interface**
... ... @@ -242,90 +242,18 @@
242 242  
243 243  The account details for Web Login are:
244 244  
245 -(% style="color:blue" %)**User Name: root**
212 +(% style="color:#4f81bd" %)**User Name: root**
246 246  
247 -(% style="color:blue" %)**Password:   dragino**
214 +(% style="color:#4f81bd" %)**Password:   dragino**
248 248  
249 249  [[image:image-20230106153501-1.png||height="367" width="894"]]
250 250  
251 251  
252 -== 2.2  Typical Network Setup ==
219 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
253 253  
254 -=== 2.2.1  Overview ===
221 +=== 2.2.1 Select your area frequency ===
255 255  
256 256  
257 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
258 -
259 -* **WAN Port Internet Mode**
260 -
261 -* **WiFi Client Mode**
262 -
263 -* **Cellular Mode**
264 -
265 -=== 2.2.2  Use WAN port to access Internet ===
266 -
267 -
268 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
269 -
270 -
271 -[[image:image-20230411100633-2.png||height="501" width="935"]]
272 -
273 -
274 -=== 2.2.3  Access the Internet as a WiFi Client ===
275 -
276 -
277 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
278 -
279 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
280 -
281 -[[image:image-20230411095739-1.png||height="264" width="691"]]
282 -
283 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
284 -
285 -
286 -=== 2.2.4  Use built-in 4G modem for internet access ===
287 -
288 -
289 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
290 -
291 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
292 -
293 -
294 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
295 -
296 -First, install the Micro SIM card as below direction
297 -
298 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
299 -
300 -
301 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
302 -
303 -
304 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
305 -
306 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
307 -
308 -
309 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
310 -
311 -
312 -=== 2.2.5  Check Internet connection ===
313 -
314 -
315 -In the **home** page, we can check the Internet connection.
316 -
317 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
318 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
319 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
320 -
321 -[[image:image-20230411101534-3.png||height="544" width="942"]]
322 -
323 -
324 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
325 -
326 -=== 2.3.1 Select your area frequency ===
327 -
328 -
329 329  (((
330 330  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
331 331  
... ... @@ -335,7 +335,7 @@
335 335  [[image:image-20220622103332-9.png||height="485" width="938"]]
336 336  
337 337  
338 -=== 2.3.2 Get the only gateway EUI ===
233 +=== 2.2.2 Get the only gateway EUI ===
339 339  
340 340  
341 341  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -359,7 +359,7 @@
359 359  [[image:image-20220622103956-12.png]]
360 360  
361 361  
362 -=== 2.3.3 Register the gateway to The Things Network ===
257 +== 2.2.3 Register the gateway to The Things Network ==
363 363  
364 364  
365 365  **Login to The Things Network**
... ... @@ -380,7 +380,7 @@
380 380  == 3.1 Home ==
381 381  
382 382  
383 -Shows the system running status:
278 +//Shows the system running status~://
384 384  
385 385  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
386 386  
... ... @@ -390,15 +390,15 @@
390 390  === 3.2.1 LoRa ~-~-> LoRa ===
391 391  
392 392  
393 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
288 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
394 394  
395 -Different LPS8v2 hardware versions can support different frequency ranges:
290 +//Different LPS8v2 hardware versions can support different frequency ranges~://
396 396  
397 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
398 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
292 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
293 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
399 399  
400 400  (% class="wikigeneratedid" %)
401 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
296 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
402 402  
403 403  
404 404  (% class="wikigeneratedid" %)
... ... @@ -415,7 +415,7 @@
415 415  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
416 416  
417 417  
418 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
313 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
419 419  
420 420  
421 421  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -424,7 +424,7 @@
424 424  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
425 425  
426 426  
427 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
322 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
428 428  
429 429  
430 430  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -439,9 +439,8 @@
439 439  
440 440  === 3.4.1 Network ~-~-> WiFi ===
441 441  
442 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
443 443  
444 -[[image:image-20230619095946-1.png||height="332" width="827"]]
338 +[[image:image-20220616114756-4.png||height="251" width="669"]]
445 445  
446 446  
447 447  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -453,7 +453,7 @@
453 453  === 3.4.3 Network ~-~-> Network ===
454 454  
455 455  
456 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
350 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
457 457  
458 458  [[image:image-20230214093657-2.png||height="333" width="858"]]
459 459  
... ... @@ -461,7 +461,7 @@
461 461  === 3.4.4 Network ~-~-> Cellular ===
462 462  
463 463  
464 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
358 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
465 465  
466 466  (% style="color:red" %)**Note: APN cannot be empty.**
467 467  
... ... @@ -468,16 +468,10 @@
468 468  [[image:image-20230228115126-1.png]]
469 469  
470 470  
471 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
365 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
472 472  
473 473  [[image:image-20230228115535-2.png||height="478" width="888"]]
474 474  
475 -
476 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
477 -
478 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
479 -
480 -
481 481  == 3.5 System ==
482 482  
483 483  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -485,13 +485,13 @@
485 485  
486 486  Shows the system info:
487 487  
488 -[[image:image-20231031162854-1.png]]
376 +[[image:image-20220917144512-5.png||height="618" width="853"]]
489 489  
490 490  
491 491  === 3.5.2 System ~-~-> System General ===
492 492  
493 493  
494 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
382 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
495 495  
496 496  In addition, Users can customize the FallBack IP address.
497 497  
... ... @@ -501,118 +501,100 @@
501 501  === 3.5.3 System ~-~-> Backup/Restore ===
502 502  
503 503  
504 -[[image:image-20231031162927-2.png]]
392 +[[image:image-20220917144725-6.png||height="208" width="869"]]
505 505  
506 -=== 3.5.4 System ~-~-> Reboot / Reset ===
507 507  
508 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
395 +=== 3.5.4 System ~-~-> Remoteit ===
509 509  
510 -ETH LED will SOLID BULE Until the restore is finished.
511 511  
512 -When the gateway restores the factory settings is complete,
398 +In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
513 513  
514 -The WiFi configuration will enable WiFi Access Point by default.
515 515  
516 -The other configuration will be restored to the default configuration.
401 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
517 517  
518 -[[image:image-20240203172853-1.png||height="365" width="901"]]
403 +[[image:image-20221230092303-2.png]]
519 519  
520 520  
521 -=== 3.5.5 System ~-~-> Remoteit ===
406 +=== 3.5.5 System ~-~-> Package Management ===
522 522  
523 523  
524 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
409 +In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
525 525  
411 +[[image:image-20230214094316-4.png]]
526 526  
527 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
528 528  
529 -[[image:image-20221230092303-2.png]]
414 += 4. Build-in Server =
530 530  
531 531  
532 -=== 3.5.6 System ~-~-> Package Management ===
417 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
533 533  
534 534  
535 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
420 +[[image:image-20230214095318-5.png||height="347" width="980"]]
536 536  
537 -[[image:image-20230214094316-4.png]]
538 538  
423 +(% style="color:red" %)**Note:**
539 539  
540 -= 4. Build-in Server =
425 + **Path**: System ~-~-> Built-in Server
541 541  
542 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
543 543  
428 +**Troubleshooting:**
544 544  
545 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
546 546  
547 -[[image:image-20231106180816-4.png||height="416" width="896"]]
431 +**~ 1. URL does not jump properly**
548 548  
549 -[[image:image-20231201165904-1.png||height="466" width="899"]]
433 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
550 550  
551 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
435 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
552 552  
553 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
554 554  
438 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
555 555  
556 556  
557 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
441 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
558 558  
443 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
559 559  
560 -[[image:image-20230616175558-7.png||height="362" width="894"]]
561 561  
562 -[[image:image-20231201170355-2.png||height="536" width="899"]]
446 +Login account:
563 563  
564 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
448 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
565 565  
450 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
566 566  
567 567  
568 -== **3). Troubleshooting:** ==
453 +[[image:image-20220725171719-1.png||height="570" width="769"]]
569 569  
570 570  
571 -* (((
572 -=== ** If the URL does not jump properly.** ===
573 -)))
456 +== 4.2 Application Server ~-~- Node-Red ==
574 574  
575 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
576 576  
577 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
459 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
578 578  
579 579  
580 -* (((
581 -=== ** How to install InfluxDB, Garfana.** ===
582 -)))
462 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
583 583  
584 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
585 585  
465 +[[image:image-20220725172124-3.png||height="610" width="843"]]
586 586  
587 -* (((
588 -=== ** How to upgrade the gateway node.js to the latest version.** ===
589 -)))
590 590  
591 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
592 592  
469 +=== **Using Node-Red, InfluxDB and Grafana** ===
593 593  
594 -* (((
595 -=== ** How to batch register device on the built-in Chirpstack network server** ===
596 -)))
471 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
597 597  
598 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
599 599  
474 +the users can refer to this link to install them.
600 600  
601 -* (((
602 -=== ** Why my gateway is not Chirpstack?** ===
603 -)))
476 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
604 604  
605 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
606 606  
479 +== 4.3 How to disable the built-in server ==
607 607  
608 -* (((
609 -=== ** How to disable the built-in server** ===
610 -)))
611 611  
482 +Use the following commands to start and stop the TTNv3 service:
483 +
612 612  (% class="box infomessage" %)
613 613  (((
614 -Use the following commands to start and stop the TTNv3 service:**     **
615 -
616 616  **# start**
617 617  systemctl start ttnstack
618 618  
... ... @@ -626,10 +626,10 @@
626 626  systemctl disable ttnstack
627 627  )))
628 628  
629 -(% class="box infomessage" %)
630 -(((
631 631  Use the following commands to start and stop the Node-Red service:
632 632  
501 +(% class="box infomessage" %)
502 +(((
633 633  **# start**
634 634  systemctl start nodered
635 635  
... ... @@ -644,47 +644,22 @@
644 644  )))
645 645  
646 646  
647 -* (((
648 -=== ** How to choose the Chirpstack server frequency SubBand** ===
649 -)))
517 +== 4.4 How to use ChirpStack on LPS8-V2 ==
650 650  
651 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
652 652  
653 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
520 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
654 654  
655 -[[image:image-20230602140406-3.png||height="480" width="918"]]
522 +[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
656 656  
524 +[[image:image-20230222094908-1.png||height="133" width="798"]]
657 657  
658 -When the configuration is complete, click** "Save&Apply"**.
659 659  
527 += 5. How users can access LPS8-V2 using serial USB =
660 660  
661 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
662 662  
663 -[[image:image-20230602143122-4.png||height="511" width="983"]]
664 -
665 -
666 -= 5. Watch Dog =
667 -
668 -
669 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
670 -
671 -The uses can be via the below method to enable Watch Dog:
672 -
673 -
674 -(% class="box infomessage" %)
675 -(((
676 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
677 -)))
678 -
679 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
680 -
681 -
682 -
683 -= 6. How users can access LPS8-V2 using serial USB =
684 -
685 -
686 686  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
687 687  
532 +
688 688  Port 1 of the UART on the LPS8-V2 is GND
689 689  
690 690  (% class="box infomessage" %)
... ... @@ -696,10 +696,12 @@
696 696  **GND <~-~--> GND (Black line)**
697 697  )))
698 698  
544 +
699 699  **LPS8v2 UART connection photo**
700 700  
701 -[[image:image-20230421094319-2.png||height="351" width="392"]]
547 +[[image:image-20220804163015-1.png||height="621" width="466"]]
702 702  
549 +
703 703  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
704 704  
705 705  
... ... @@ -709,211 +709,114 @@
709 709  [[image:image-20220804164747-2.png||height="622" width="594"]]
710 710  
711 711  
712 -= 7. OTA System Update =
559 += 6. Use the helium gateway-rs as the Data-only Hotspot =
713 713  
714 714  
715 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
562 +== **Step 1: Configure Frequency Band** ==
716 716  
717 717  
718 -== 7.1 Auto-update method ==
565 +//Each country has a requirement for frequency region. Choose the right one for your area.//
719 719  
567 +[[image:image-20220905164308-1.png]]
720 720  
721 -The default, each gateway will enable the auto-update function.
722 722  
723 -this function will be triggered every boot and every midnight.
724 724  
571 +== **Step 2: Configure the forward address** ==
725 725  
726 -Users can enable/disable it via Web Page
727 727  
728 -[[image:image-20230607094447-2.png]]
574 +**Select one of the servers to configure.**
729 729  
576 +**For example:**
730 730  
731 -== 7.2 Manual upgrade method ==
578 +[[image:image-20220905164847-2.png]]
732 732  
733 733  
734 -1). Using the Linux command to upgrade the system
735 735  
582 +== **Step 3: Download and Install the Helium-gateway-rs** ==
736 736  
737 -(% class="box infomessage" %)
738 -(((
739 -**apt update && apt install *dragino***
740 -)))
741 741  
585 +**Access the gateway CLI via SSH.**
742 742  
743 -2). Upgrade the system via the Web page button of "Manual Update"
587 +[[image:image-20220905165222-3.png]]
744 744  
745 745  
746 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
590 +**Download gateway-rs.**
747 747  
748 -[[image:image-20230607093849-1.png]]
592 +[[image:image-20220905165715-5.png]]
749 749  
750 -
751 -
752 -= 8. FAQ =
753 -
754 -== 8.1 How to change Hostname ==
755 -
756 -
757 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
758 -
759 759  (% class="box infomessage" %)
760 760  (((
761 -hostnamectl set-hostname dragino-123456
596 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
762 762  )))
763 763  
764 -[[image:image-20230517102429-1.png]]
765 765  
766 -After the configuration is complete, run "reboot" to restart the gateway.
600 +**Install gateway-rs.**
767 767  
602 +[[image:image-20220905165917-7.png]]
768 768  
769 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
770 -
771 -
772 -Migrate guide:
773 -
774 -To stabilize the completion of the migration, The users can migrate in one of the following ways
775 -
776 -**Method 1. Using the Linux shell, **
777 -
778 -**Method 2. Flash a new image with the Chirpstack**
779 -
780 -
781 -
782 -=== Method 1: Using the Linux shell ===
783 -
784 784  (% class="box infomessage" %)
785 785  (((
786 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
606 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
787 787  )))
788 788  
789 789  
610 +**Modify configuration.**
790 790  
791 -=== Method 2: Flash a new image ===
792 792  
793 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
613 +[[image:image-20220905173847-12.png]]
794 794  
795 795  
796 -
797 -== 8.3 How to reduce the 4g data consumed ==
798 -
799 -
800 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
801 -
802 -[[image:image-20230719100239-1.png||height="724" width="994"]]
803 -
804 -
805 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
806 -
807 -[[image:image-20230719100332-2.png]]
808 -
809 -
810 -3. Disable the auto-update:
811 -
812 -[[image:image-20230719100419-3.png||height="458" width="995"]]
813 -
814 -
815 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
816 -
817 -
818 818  (% class="box infomessage" %)
819 819  (((
820 -apt update && apt install helium-gateway
618 +**region=<Enter regional parameters> \
619 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
620 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
821 821  )))
822 822  
823 823  
824 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
624 +**Restart the helium_gateway**
825 825  
626 +[[image:image-20220905170920-9.png]]
826 826  
827 -By default, the LPS8v2's built-in server is ChirpStack v4,
828 828  
829 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
830 -
831 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
832 -
833 -
834 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
835 -
836 -
837 -== 8.6 How do I view gateway logs ==
838 -
839 -=== 8.6.1 LoRaWAN Log: ===
840 -
841 -==== Semtech UDP Log : ====
842 -
843 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
844 -
845 -[[image:image-20231017112115-2.png||height="611" width="821"]]
846 -
847 -
848 -==== Station Log: ====
849 -
850 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
851 -
852 -[[image:image-20231017111606-1.png||height="622" width="821"]]
853 -
854 -
855 -=== 8.6.2  4G Log ===
856 -
857 -The user needs to access the Linux console of the gateway and enter the following command:
858 -
859 859  (% class="box infomessage" %)
860 860  (((
861 -cat /var/log/qmilog.txt
631 +**systemctl restart helium_gateway**
862 862  )))
863 863  
864 -[[image:image-20231017114417-3.png||height="543" width="679"]]
865 865  
635 +**Check the helium_gateway Log：**
866 866  
867 -=== 8.6.3 Dmesg Log ===
637 +[[image:image-20220905173952-13.png]]
868 868  
869 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
870 870  
871 -[[image:image-20231017115330-5.png||height="565" width="740"]]
872 -
873 -
874 -=== 8.6.4 Record Log ===
875 -
876 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
877 -
878 -[[image:image-20231017115124-4.png||height="215" width="880"]]
879 -
880 -
881 -=== 8.6.5 View gateway logs via Linux Command ===
882 -
883 -**Semtech UDP Log :**
884 -
885 885  (% class="box infomessage" %)
886 886  (((
887 -**journalctl -u draginofwd -f**
642 +**journalctl -u helium_gateway -f**
888 888  )))
889 889  
890 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
891 891  
646 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
892 892  
893 -**Station Log:**
648 +where the helium gateway log is shown:
894 894  
895 -(% class="box infomessage" %)
896 -(((
897 -**tail -f /var/log/station.log **
898 -)))
650 +[[image:image-20220905174534-14.png]]
899 899  
900 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
901 901  
653 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
902 902  
903 -**Dmesg Log:**
904 904  
905 -(% class="box infomessage" %)
906 -(((
907 -**dmesg**
908 -)))
656 += 7. OTA System Update =
909 909  
910 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
911 911  
912 -= 9. Trouble Shooting =
659 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
913 913  
914 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
915 915  
662 += 8. Trouble Shooting =
916 916  
664 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
665 +
666 +
917 917  [[image:image-20220920135918-1.png]]
918 918  
919 919  
... ... @@ -929,89 +929,20 @@
929 929  [[image:image-20220920141936-2.png]]
930 930  
931 931  
932 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
682 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
933 933  
934 934  
935 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
936 -
937 -[[image:image-20230508171607-1.png]]
938 -
939 -
940 -== 9.3  Fallback IP does not work, how can users check ==
941 -
942 -
943 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
944 -
945 -
946 -**1.Check whether the configuration is correct**
947 -
948 -Run the CMD command to ipconfig and ping 172.31.255.254.
949 -
950 -If this fails, the user needs to reconfigure.
951 -
952 -[[image:image-20230413170224-3.png||height="433" width="707"]]
953 -
954 -[[image:image-20230413170246-4.png]]
955 -
956 -
957 -**2. Check whether the firewall is disabled**
958 -
959 -If the firewall is not down, this will affect access to the gateway.
960 -
961 -
962 -== 9.4  Click "Manual_Update", why there is no response? ==
963 -
964 -
965 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
966 -
967 -
968 -[[image:image-20230527090555-3.png||height="660" width="832"]]
969 -
970 -
971 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
972 -
973 -
974 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
975 -
976 -
977 -(% class="box infomessage" %)
978 978  (((
979 -apt update && apt install *dragino*
980 -
981 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
686 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
982 982  )))
983 983  
984 -
985 -== 9.6  How to reset the built-in server ==
986 -
987 -
988 -**1) Build-in The Things Network**
989 -
990 -Refer to this link to delete the Built-in server's device.
991 -
992 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
993 -
994 -
995 -**2) Build-in Chirpstack**
996 -
997 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
998 -
999 -[[image:image-20231106180846-5.png||height="310" width="668"]]
1000 -
1001 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1002 -
1003 -
1004 1004  (((
1005 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1006 -)))
690 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
1007 1007  
1008 -(((
1009 -With your question as detailed as possible. We will reply and help you in the shortest.
1010 1010  
693 += 10. Reference =
1011 1011  
1012 -= 11. Reference =
1013 1013  
1014 -
1015 1015  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
1016 1016  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
1017 1017  
... ... @@ -1018,7 +1018,7 @@
1018 1018  
1019 1019  )))
1020 1020  
1021 -= 12. Order Info =
702 += 11. Order Info =
1022 1022  
1023 1023  
1024 1024  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1026,31 +1026,23 @@
1026 1026  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
1027 1027  
1028 1028  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1029 -
1030 1030  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1031 -
1032 1032  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1033 -
1034 1034  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1035 -
1036 1036  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1037 -
1038 1038  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1039 1039  
1040 1040  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
1041 1041  
1042 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
718 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
719 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
720 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
721 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1043 1043  
1044 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1045 -
1046 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1047 -
1048 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1049 -
1050 1050  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1051 1051  
1052 1052  
1053 -= 13. Manufacturer Info =
726 += 12. Manufacturer Info =
1054 1054  
1055 1055  
1056 1056  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1060,7 +1060,7 @@
1060 1060  LongCheng Street, LongGang District ; Shenzhen 518116,China
1061 1061  
1062 1062  
1063 -= 14. FCC Warning =
736 += 13. FCC Warning =
1064 1064  
1065 1065  
1066 1066  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0