Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 292.1 >
edited by Kilight Cao
on 2024/02/03 17:28
To version < 314.1 >
edited by Kilight Cao
on 2024/05/18 16:22
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== 1.1 What is LPS8v2 ==
21 +== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
22 22  
23 23  
24 24  (((
... ... @@ -96,11 +96,11 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
103 + ✓**  SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
... ... @@ -132,6 +132,7 @@
132 132  
133 133  The other configuration will be restored to the default configuration.
134 134  
135 +
135 135  = 2. Quick Start =
136 136  
137 137  
... ... @@ -159,7 +159,6 @@
159 159  [[image:image-20230527085250-2.png||height="495" width="284"]]
160 160  
161 161  
162 -
163 163  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 164  
165 165  
... ... @@ -174,7 +174,6 @@
174 174  [[image:image-20220622100129-1.png||height="332" width="1263"]]
175 175  
176 176  
177 -
178 178  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
179 179  
180 180  
... ... @@ -206,7 +206,6 @@
206 206  [[image:image-20230111094247-2.png||height="619" width="1250"]]
207 207  
208 208  
209 -
210 210  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
211 211  
212 212  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -246,7 +246,7 @@
246 246  
247 247  (% style="color:blue" %)**Password:   dragino**
248 248  
249 -[[image:image-20230106153501-1.png||height="367" width="894"]]
247 +[[image:image-20240318160845-1.png]]
250 250  
251 251  
252 252  == 2.2  Typical Network Setup ==
... ... @@ -309,6 +309,9 @@
309 309  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
310 310  
311 311  
310 +**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 +
312 +
312 312  === 2.2.5  Check Internet connection ===
313 313  
314 314  
... ... @@ -503,10 +503,24 @@
503 503  
504 504  [[image:image-20231031162927-2.png]]
505 505  
507 +=== 3.5.4 System ~-~-> Reboot / Reset ===
506 506  
507 -=== 3.5.4 System ~-~-> Remoteit ===
509 +In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
508 508  
511 +ETH LED will SOLID BULE Until the restore is finished.
509 509  
513 +When the gateway restores the factory settings is complete,
514 +
515 +The WiFi configuration will enable WiFi Access Point by default.
516 +
517 +The other configuration will be restored to the default configuration.
518 +
519 +[[image:image-20240203172853-1.png||height="365" width="901"]]
520 +
521 +
522 +=== 3.5.5 System ~-~-> Remoteit ===
523 +
524 +
510 510  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
511 511  
512 512  
... ... @@ -515,7 +515,7 @@
515 515  [[image:image-20221230092303-2.png]]
516 516  
517 517  
518 -=== 3.5.5 System ~-~-> Package Management ===
533 +=== 3.5.6 System ~-~-> Package Management ===
519 519  
520 520  
521 521  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -523,6 +523,38 @@
523 523  [[image:image-20230214094316-4.png]]
524 524  
525 525  
541 +== 3.5 Logread ==
542 +
543 +=== 3.5.1 LoRa Log ===
544 +
545 +
546 +In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
547 +
548 +[[image:image-20240416112509-1.png]]
549 +
550 +
551 +=== 3.5.2 Gateway Traffic ===
552 +
553 +In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
554 +
555 +[[image:image-20240416112618-2.png||height="705" width="1122"]]
556 +
557 +
558 +=== 3.5.3 System Log ===
559 +
560 +In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
561 +
562 +[[image:image-20240416112649-3.png||height="820" width="1122"]]
563 +
564 +
565 +=== 3.5.4 Record Log ===
566 +
567 +In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
568 +
569 +[[image:image-20240416112712-4.png||height="319" width="1128"]]
570 +
571 +
572 +
526 526  = 4. Build-in Server =
527 527  
528 528  After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
... ... @@ -656,7 +656,6 @@
656 656  
657 657  The uses can be via the below method to enable Watch Dog:
658 658  
659 -
660 660  (% class="box infomessage" %)
661 661  (((
662 662  wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
... ... @@ -665,7 +665,6 @@
665 665  [[image:image-20231124113209-1.png||height="470" width="1157"]]
666 666  
667 667  
668 -
669 669  = 6. How users can access LPS8-V2 using serial USB =
670 670  
671 671  
... ... @@ -719,7 +719,6 @@
719 719  
720 720  1). Using the Linux command to upgrade the system
721 721  
722 -
723 723  (% class="box infomessage" %)
724 724  (((
725 725  **apt update && apt install *dragino***
... ... @@ -728,18 +728,192 @@
728 728  
729 729  2). Upgrade the system via the Web page button of "Manual Update"
730 730  
775 +(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
731 731  
732 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
733 -
734 734  [[image:image-20230607093849-1.png]]
735 735  
736 736  
780 +(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
781 += 8. More Services =
737 737  
738 -= 8. FAQ =
783 +== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)8.1 NTP Service/Time Synchronization(%%) ==
739 739  
740 -== 8.1 How to change Hostname ==
785 +The gateway time sync service is provided by chrony service
741 741  
742 742  
788 +=== 1). Modify the NTP server address: ===
789 +
790 +(% class="box infomessage" %)
791 +(((
792 +Configuration file path:  /etc/chrony/chrony.conf
793 +)))
794 +
795 +
796 +=== 2). Start/Stop/Enable/Disable NTP service: ===
797 +
798 +(% class="box infomessage" %)
799 +(((
800 +systemctl start chrony
801 +\\systemctl stop chrony
802 +\\systemctl disable chrony
803 +\\systemctl enable chrony
804 +)))
805 +
806 +
807 +== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)8.2 How to connect the helium blockchain as a Data-only hotspot(%%) ==
808 +
809 +
810 +(% class="box infomessage" %)
811 +(((
812 +(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
813 +apt update && apt install helium-gateway
814 +)))
815 +
816 +
817 +(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
818 += 9. More features =
819 +
820 +(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
821 +== 9.1 How does the gateway connect to Chirpstack via MQTT Forwarder ==
822 +
823 +
824 +ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
825 +
826 +
827 +(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
828 +=== 9.1.1 Configure Packet Forwarder ===
829 +
830 +In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
831 +
832 +(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
833 +By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
834 +
835 +* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
836 +* Configure the following settings:
837 +** **Service Provider:** //Custom / Private LoRaWAN//
838 +** **Server Address:** localhost
839 +** **Uplink Port:** 1700
840 +** **Downlink Port:** 1700
841 +* Click **Save & Apply**
842 +
843 +[[image:image-20240518145929-2.png||height="652" width="727"]]
844 +
845 +
846 +(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
847 +=== 9.1.2 Install ChirpStack MQTT Forwarder ===
848 +
849 +==== ====
850 +
851 +(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
852 +(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
853 +
854 +First you must login into the gateway using SSH:
855 +
856 +(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
857 +(((
858 +ssh root@GATEWAY-IP-ADDRESS
859 +)))
860 +
861 +(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
862 +The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
863 +
864 +
865 +(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
866 +(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
867 +
868 +(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
869 +Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
870 +
871 +(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
872 +(((
873 +cd /tmp
874 +wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
875 +)))
876 +
877 +
878 +(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
879 +(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
880 +
881 +Use the dpkg package-manager to install the downloaded package. Example:
882 +
883 +(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
884 +(((
885 +dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
886 +)))
887 +
888 +[[image:image-20240518152148-4.png]]
889 +
890 +
891 +(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
892 +**Configuration**
893 +
894 +To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
895 +
896 +(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
897 +This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
898 +
899 +
900 +**ChirpStack MQTT Forwarder Setting:**
901 +
902 +(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
903 +(((
904 +topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
905 +
906 +server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
907 +)))
908 +
909 +username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
910 +
911 +
912 +Use commands to modify configuration files:
913 +
914 +(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
915 +(((
916 +vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
917 +)))
918 +
919 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
920 +
921 +
922 +**(Re)start and stop commands**
923 +
924 +Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
925 +
926 +(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
927 +(((
928 +# start
929 +
930 +(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
931 +systemctl start chirpstack-mqtt-forwarder
932 +
933 +# stop
934 +
935 +systemctl stop chirpstack-mqtt-forwarder
936 +
937 +# restart
938 +
939 +systemctl restart chirpstack-mqtt-forwarder
940 +)))
941 +
942 +(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
943 +(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
944 +
945 +
946 +**Check result**
947 +
948 +(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
949 +Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
950 +
951 +[[image:image-20240518154223-5.png]]
952 +
953 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
954 +
955 +
956 += (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10. FAQ(%%) =
957 +
958 +== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)10.1 How to change Hostname(%%) ==
959 +
960 +
743 743  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
744 744  
745 745  (% class="box infomessage" %)
... ... @@ -752,7 +752,7 @@
752 752  After the configuration is complete, run "reboot" to restart the gateway.
753 753  
754 754  
755 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
973 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
756 756  
757 757  
758 758  Migrate guide:
... ... @@ -764,7 +764,6 @@
764 764  **Method 2. Flash a new image with the Chirpstack**
765 765  
766 766  
767 -
768 768  === Method 1: Using the Linux shell ===
769 769  
770 770  (% class="box infomessage" %)
... ... @@ -773,16 +773,14 @@
773 773  )))
774 774  
775 775  
776 -
777 777  === Method 2: Flash a new image ===
778 778  
779 779  Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
780 780  
781 781  
998 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
782 782  
783 -== 8.3 How to reduce the 4g data consumed ==
784 784  
785 -
786 786  1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
787 787  
788 788  [[image:image-20230719100239-1.png||height="724" width="994"]]
... ... @@ -798,18 +798,9 @@
798 798  [[image:image-20230719100419-3.png||height="458" width="995"]]
799 799  
800 800  
801 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
1016 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
802 802  
803 803  
804 -(% class="box infomessage" %)
805 -(((
806 -apt update && apt install helium-gateway
807 -)))
808 -
809 -
810 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
811 -
812 -
813 813  By default, the LPS8v2's built-in server is ChirpStack v4,
814 814  
815 815  If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
... ... @@ -820,10 +820,11 @@
820 820  Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
821 821  
822 822  
823 -== 8.6 How do I view gateway logs ==
1029 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %).6 How do I view gateway logs(%%) ==
824 824  
825 -=== 8.6.1 LoRaWAN Log: ===
1031 +=== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %).6.1 LoRaWAN Log:(%%) ===
826 826  
1033 +
827 827  ==== Semtech UDP Log : ====
828 828  
829 829  When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
... ... @@ -838,10 +838,11 @@
838 838  [[image:image-20231017111606-1.png||height="622" width="821"]]
839 839  
840 840  
841 -=== 8.6.2  4G Log ===
1048 +=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)9.6.2  4G Log(%%) ===
842 842  
843 -The user needs to access the Linux console of the gateway and enter the following command:
844 844  
1051 +User needs to access the Linux console of the gateway and enter the following command:
1052 +
845 845  (% class="box infomessage" %)
846 846  (((
847 847  cat /var/log/qmilog.txt
... ... @@ -850,22 +850,48 @@
850 850  [[image:image-20231017114417-3.png||height="543" width="679"]]
851 851  
852 852  
853 -=== 8.6.3 Dmesg Log ===
1061 +LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
854 854  
1063 +Below are some commands as reference:
1064 +
1065 +>Usage:  /usr/bin/quectel-CM [options]
1066 +> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
1067 +> -p pincode Verify sim card pin if sim card is locked
1068 +> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
1069 +> -f logfilename Save log message of this program to file
1070 +> -u usbmonlog filename  Save usbmon log to file
1071 +> -i interface Specify which network interface to setup data call when multi-modems exits
1072 +> -4 Setup IPv4 data call (default)
1073 +> -6 Setup IPv6 data call
1074 +> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
1075 +> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
1076 +> -b Enable network interface bridge function (default 0)
1077 +> -v Verbose log mode, for debug purpose.[Examples]
1078 +>Example 1: /usr/bin/quectel-CM
1079 +>Example 2: /usr/bin/quectel-CM -s 3gnet
1080 +>Example 3: /usr/bin/quectel-CM -s 3gnet -v
1081 +
1082 +
1083 +
1084 +=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)9.6.3 Dmesg Log(%%) ===
1085 +
1086 +
855 855  Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
856 856  
857 857  [[image:image-20231017115330-5.png||height="565" width="740"]]
858 858  
859 859  
860 -=== 8.6.4 Record Log ===
1092 +=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)9.6.4 Record Log(%%) ===
861 861  
1094 +
862 862  Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
863 863  
864 864  [[image:image-20231017115124-4.png||height="215" width="880"]]
865 865  
866 866  
867 -=== 8.6.5 View gateway logs via Linux Command ===
1100 +=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)9.6.5 View gateway logs via Linux Command(%%) ===
868 868  
1102 +
869 869  **Semtech UDP Log :**
870 870  
871 871  (% class="box infomessage" %)
... ... @@ -895,11 +895,21 @@
895 895  
896 896  [[image:image-20231207145210-3.png||height="310" width="1021"]]
897 897  
898 -= 9. Trouble Shooting =
899 899  
900 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1133 +== (% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %)9.5 DIN Mount Reference:(%%) ==
901 901  
902 902  
1136 +[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1137 +
1138 +[[image:image-20240318095617-2.png]]
1139 +
1140 +
1141 +
1142 +
1143 += (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)10. Trouble Shooting(%%) =
1144 +
1145 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1146 +
903 903  [[image:image-20220920135918-1.png]]
904 904  
905 905  
... ... @@ -915,7 +915,7 @@
915 915  [[image:image-20220920141936-2.png]]
916 916  
917 917  
918 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1162 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
919 919  
920 920  
921 921  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -923,13 +923,13 @@
923 923  [[image:image-20230508171607-1.png]]
924 924  
925 925  
926 -== 9.3  Fallback IP does not work, how can users check ==
1170 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
927 927  
928 928  
929 929  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
930 930  
931 931  
932 -**1.Check whether the configuration is correct**
1176 +**~1. Check whether the configuration is correct**
933 933  
934 934  Run the CMD command to ipconfig and ping 172.31.255.254.
935 935  
... ... @@ -945,7 +945,7 @@
945 945  If the firewall is not down, this will affect access to the gateway.
946 946  
947 947  
948 -== 9.4  Click "Manual_Update", why there is no response? ==
1192 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
949 949  
950 950  
951 951  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -954,12 +954,11 @@
954 954  [[image:image-20230527090555-3.png||height="660" width="832"]]
955 955  
956 956  
957 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
1201 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
958 958  
959 959  
960 960  Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
961 961  
962 -
963 963  (% class="box infomessage" %)
964 964  (((
965 965  apt update && apt install *dragino*
... ... @@ -968,7 +968,7 @@
968 968  )))
969 969  
970 970  
971 -== 9.6  How to reset the built-in server ==
1214 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
972 972  
973 973  
974 974  **1) Build-in The Things Network**
... ... @@ -984,9 +984,10 @@
984 984  
985 985  [[image:image-20231106180846-5.png||height="310" width="668"]]
986 986  
987 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
988 988  
1231 += (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
989 989  
1233 +
990 990  (((
991 991  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
992 992  )))
image-20240318095605-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +71.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0