Last modified by Kilight Cao on 2025/02/08 14:05
<
From version < 291.1 >
edited by Kilight Cao
on 2024/02/02 16:37
To version < 114.1 >
edited by Kilight Cao
on 2022/11/04 15:44
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,18 +57,18 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
70 70  
71 71  
71 +== **1.3 Features** ==
72 +
73 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -81,90 +81,74 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
88 88  
89 89  
90 -LPS8-V2 has totally four LEDs, They are:
91 +== **1.4 Block Diagram** ==
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
95 +== **1.5 LED Indicators** ==
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
98 +LPS8-V2 has totally four LEDs, They are:
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
101 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
103 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
106 106  
105 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
107 107  
108 -== 1.5 Button Intruction ==
107 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
109 109  
109 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
110 110  
111 -LPS8-V2 has a black toggle button, which is:
111 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
113 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
113 113  
114 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
117 117  
117 +== **1.6 Button Intruction** ==
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
120 +LPS8-V2 has a black toggle button, which is:
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
123 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
125 125  
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
125 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
127 127  
128 128  
129 -When the gateway restores the factory settings is complete,
128 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
130 130  
131 -The WiFi configuration will enable WiFi Access Point by default.
130 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
132 132  
133 -The other configuration will be restored to the default configuration.
134 134  
135 -= 2. Quick Start =
136 136  
134 += **2. Quick Start** =
137 137  
136 +
138 138  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
139 139  
140 140  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
141 141  
142 142  
143 -== 2.1 Access and Configure LPS8-V2 ==
144 144  
145 -=== 2.1.1 Find IP address of LPS8-V2 ===
143 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
146 146  
147 147  
148 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
146 +== **2.1.1 connect the network.** ==
149 149  
150 150  
151 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
149 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
152 152  
153 -(% style="background-color:yellow" %)**dragino+dragino**
154 154  
155 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
156 -
157 -[[image:image-20230527084515-1.png]]
158 -
159 -[[image:image-20230527085250-2.png||height="495" width="284"]]
160 -
161 -
162 -
163 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 -
165 -
166 166  (((
167 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
153 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
168 168  )))
169 169  
170 170  (((
... ... @@ -175,40 +175,9 @@
175 175  
176 176  
177 177  
178 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
164 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
179 179  
180 180  
181 -[[image:image-20230107084650-2.png||height="310" width="839"]]
182 -
183 -
184 -(% style="color:blue" %)**Steps to connect via fallback IP:**
185 -
186 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
187 -
188 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
189 -
190 -
191 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
192 -
193 -
194 -As in the below photo:
195 -
196 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
197 -
198 -
199 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
200 -
201 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
202 -
203 -
204 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
205 -
206 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
207 -
208 -
209 -
210 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
211 -
212 212  [[image:image-20220622100542-2.png||height="369" width="1256"]]
213 213  
214 214  
... ... @@ -228,104 +228,13 @@
228 228  [[image:image-20220622102901-8.png||height="476" width="938"]]
229 229  
230 230  
231 -=== 2.1.2 Access Configure Web UI ===
232 232  
187 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
233 233  
234 -**Web Interface**
235 235  
236 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
190 +=== **2.2.1 Select your area frequency** ===
237 237  
238 238  
239 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
240 -
241 -You will see the login interface of LPS8-V2 as shown below.
242 -
243 -The account details for Web Login are:
244 -
245 -(% style="color:blue" %)**User Name: root**
246 -
247 -(% style="color:blue" %)**Password:   dragino**
248 -
249 -[[image:image-20230106153501-1.png||height="367" width="894"]]
250 -
251 -
252 -== 2.2  Typical Network Setup ==
253 -
254 -=== 2.2.1  Overview ===
255 -
256 -
257 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
258 -
259 -* **WAN Port Internet Mode**
260 -
261 -* **WiFi Client Mode**
262 -
263 -* **Cellular Mode**
264 -
265 -=== 2.2.2  Use WAN port to access Internet ===
266 -
267 -
268 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
269 -
270 -
271 -[[image:image-20230411100633-2.png||height="501" width="935"]]
272 -
273 -
274 -=== 2.2.3  Access the Internet as a WiFi Client ===
275 -
276 -
277 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
278 -
279 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
280 -
281 -[[image:image-20230411095739-1.png||height="264" width="691"]]
282 -
283 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
284 -
285 -
286 -=== 2.2.4  Use built-in 4G modem for internet access ===
287 -
288 -
289 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
290 -
291 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
292 -
293 -
294 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
295 -
296 -First, install the Micro SIM card as below direction
297 -
298 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
299 -
300 -
301 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
302 -
303 -
304 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
305 -
306 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
307 -
308 -
309 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
310 -
311 -
312 -=== 2.2.5  Check Internet connection ===
313 -
314 -
315 -In the **home** page, we can check the Internet connection.
316 -
317 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
318 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
319 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
320 -
321 -[[image:image-20230411101534-3.png||height="544" width="942"]]
322 -
323 -
324 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
325 -
326 -=== 2.3.1 Select your area frequency ===
327 -
328 -
329 329  (((
330 330  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
331 331  
... ... @@ -335,9 +335,10 @@
335 335  [[image:image-20220622103332-9.png||height="485" width="938"]]
336 336  
337 337  
338 -=== 2.3.2 Get the only gateway EUI ===
339 339  
203 +=== **2.2.2 Get the only gateway EUI** ===
340 340  
205 +
341 341  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
342 342  
343 343  
... ... @@ -359,9 +359,10 @@
359 359  [[image:image-20220622103956-12.png]]
360 360  
361 361  
362 -=== 2.3.3 Register the gateway to The Things Network ===
363 363  
228 +== **2.2.3 Register the gateway to The Things Network** ==
364 364  
230 +
365 365  **Login to The Things Network**
366 366  
367 367  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -375,30 +375,34 @@
375 375  **Get it online**
376 376  
377 377  
378 -= 3. Web Configure Pages =
379 379  
380 -== 3.1 Home ==
245 += **3. Web Configure Pages** =
381 381  
382 382  
383 -Shows the system running status:
248 +== **3.1 Home** ==
384 384  
250 +
251 +//Shows the system running status~://
252 +
385 385  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
386 386  
387 387  
388 -== 3.2 LoRa Settings ==
389 389  
390 -=== 3.2.1 LoRa ~-~-> LoRa ===
257 +== **3.2 LoRa Settings** ==
391 391  
392 392  
393 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
260 +=== **3.2.1 LoRa ~-~-> LoRa** ===
394 394  
395 -Different LPS8v2 hardware versions can support different frequency ranges:
396 396  
397 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
398 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
263 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
399 399  
265 +//Different LPS8v2 hardware versions can support different frequency ranges~://
266 +
267 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
268 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
269 +
400 400  (% class="wikigeneratedid" %)
401 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
271 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
402 402  
403 403  
404 404  (% class="wikigeneratedid" %)
... ... @@ -410,23 +410,26 @@
410 410  )))
411 411  
412 412  
413 -== 3.3 LoRaWAN Settings ==
414 414  
415 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
284 +== **3.3 LoRaWAN Settings** ==
416 416  
417 417  
418 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
287 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
419 419  
420 420  
290 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
291 +
292 +
421 421  [[image:image-20220616111932-2.png||height="516" width="672"]]
422 422  
423 423  
424 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
425 425  
297 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
426 426  
427 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
428 428  
300 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
429 429  
302 +
430 430  [[image:image-20220616113246-3.png||height="396" width="672"]]
431 431  
432 432  
... ... @@ -435,246 +435,117 @@
435 435  )))
436 436  
437 437  
438 -== 3.4 Network Settings ==
439 439  
440 -=== 3.4.1 Network ~-~-> WiFi ===
312 +== **3.4 Network Settings** ==
441 441  
442 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
443 443  
444 -[[image:image-20230619095946-1.png||height="332" width="827"]]
315 +=== **3.4.1 Network ~-~-> WiFi** ===
445 445  
446 446  
447 -=== 3.4.2 Network ~-~-> System Status ===
318 +[[image:image-20220616114756-4.png||height="251" width="669"]]
448 448  
449 449  
450 -[[image:image-20220820134112-2.png||height="539" width="668"]]
451 451  
322 +=== **3.4.2 Network ~-~-> System Status** ===
452 452  
453 -=== 3.4.3 Network ~-~-> Network ===
454 454  
325 +[[image:image-20220820134112-2.png||height="539" width="668"]]
455 455  
456 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
457 457  
458 -[[image:image-20230214093657-2.png||height="333" width="858"]]
459 459  
329 +=== **3.4.3 Network ~-~-> Firewall** ===
460 460  
461 -=== 3.4.4 Network ~-~-> Cellular ===
462 462  
332 +[[image:image-20220616115351-6.png||height="244" width="661"]]
463 463  
464 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
465 465  
466 -(% style="color:red" %)**Note: APN cannot be empty.**
467 467  
468 -[[image:image-20230228115126-1.png]]
336 +== **3.5 System** ==
469 469  
470 470  
471 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
339 +=== **3.5.1  System ~-~-> System Overview** ===
472 472  
473 -[[image:image-20230228115535-2.png||height="478" width="888"]]
474 474  
475 -
476 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
477 -
478 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
479 -
480 -
481 -== 3.5 System ==
482 -
483 -=== 3.5.1 System ~-~-> System Overview ===
484 -
485 -
486 486  Shows the system info:
487 487  
488 -[[image:image-20231031162854-1.png]]
344 +[[image:image-20220917144512-5.png||height="618" width="853"]]
489 489  
490 490  
491 -=== 3.5.2 System ~-~-> System General ===
492 492  
348 +=== **3.5.2 System ~-~-> Backup/Restore** ===
493 493  
494 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
495 495  
496 -In addition, Users can customize the FallBack IP address.
351 +[[image:image-20220917144725-6.png||height="208" width="869"]]
497 497  
498 -[[image:image-20230214094058-3.png]]
499 499  
500 500  
501 -=== 3.5.3 System ~-~-> Backup/Restore ===
355 += **4. Build-in Server** =
502 502  
503 503  
504 -[[image:image-20231031162927-2.png]]
358 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
505 505  
506 506  
507 -=== 3.5.4 System ~-~-> Remoteit ===
361 +[[image:image-20220820115644-1.png||height="217" width="778"]]
508 508  
509 509  
510 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
364 +(% style="color:red" %)**Note:**
511 511  
366 + **Path**: System ~-~-> Built-in Server
512 512  
513 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
514 514  
515 -[[image:image-20221230092303-2.png]]
369 +**Troubleshooting:**
516 516  
517 517  
518 -=== 3.5.5 System ~-~-> Package Management ===
372 +**~ 1. URL does not jump properly**
519 519  
374 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
520 520  
521 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
376 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
522 522  
523 -[[image:image-20230214094316-4.png]]
524 524  
525 525  
526 -= 4. Build-in Server =
380 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
527 527  
528 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
529 529  
383 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
530 530  
531 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
385 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
532 532  
533 -[[image:image-20231106180816-4.png||height="416" width="896"]]
534 534  
535 -[[image:image-20231201165904-1.png||height="466" width="899"]]
388 +Login account:
536 536  
537 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
390 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
538 538  
539 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
392 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
540 540  
541 541  
395 +[[image:image-20220725171719-1.png||height="570" width="769"]]
542 542  
543 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
544 544  
545 545  
546 -[[image:image-20230616175558-7.png||height="362" width="894"]]
399 +== **4.2 Application Server ~-~- Node-Red** ==
547 547  
548 -[[image:image-20231201170355-2.png||height="536" width="899"]]
549 549  
550 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
402 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
551 551  
552 552  
405 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
553 553  
554 -== **3). Troubleshooting:** ==
555 555  
408 +[[image:image-20220725172124-3.png||height="610" width="843"]]
556 556  
557 -* (((
558 -=== ** If the URL does not jump properly.** ===
559 -)))
560 560  
561 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
562 562  
563 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
412 += **5. How users can access LPS8v2 using serial USB** =
564 564  
565 565  
566 -* (((
567 -=== ** How to install InfluxDB, Garfana.** ===
568 -)))
415 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
569 569  
570 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
571 571  
418 +Port 1 of the UART on the LPS8v2 is GND
572 572  
573 -* (((
574 -=== ** How to upgrade the gateway node.js to the latest version.** ===
575 -)))
576 -
577 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
578 -
579 -
580 -* (((
581 -=== ** How to batch register device on the built-in Chirpstack network server** ===
582 -)))
583 -
584 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
585 -
586 -
587 -* (((
588 -=== ** Why my gateway is not Chirpstack?** ===
589 -)))
590 -
591 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
592 -
593 -
594 -* (((
595 -=== ** How to disable the built-in server** ===
596 -)))
597 -
598 598  (% class="box infomessage" %)
599 599  (((
600 -Use the following commands to start and stop the TTNv3 service:**     **
601 -
602 -**# start**
603 -systemctl start ttnstack
604 -
605 -**# stop**
606 -systemctl stop ttnstack
607 -
608 -**# enable**
609 -systemctl enable ttnstack
610 -
611 -**#disable**
612 -systemctl disable ttnstack
613 -)))
614 -
615 -(% class="box infomessage" %)
616 -(((
617 -Use the following commands to start and stop the Node-Red service:
618 -
619 -**# start**
620 -systemctl start nodered
621 -
622 -**# stop**
623 -systemctl stop nodered
624 -
625 -**# enable**
626 -systemctl enable nodered
627 -
628 -**#disable**
629 -systemctl disable nodered
630 -)))
631 -
632 -
633 -* (((
634 -=== ** How to choose the Chirpstack server frequency SubBand** ===
635 -)))
636 -
637 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
638 -
639 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
640 -
641 -[[image:image-20230602140406-3.png||height="480" width="918"]]
642 -
643 -
644 -When the configuration is complete, click** "Save&Apply"**.
645 -
646 -
647 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
648 -
649 -[[image:image-20230602143122-4.png||height="511" width="983"]]
650 -
651 -
652 -= 5. Watch Dog =
653 -
654 -
655 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
656 -
657 -The uses can be via the below method to enable Watch Dog:
658 -
659 -
660 -(% class="box infomessage" %)
661 -(((
662 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
663 -)))
664 -
665 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
666 -
667 -
668 -
669 -= 6. How users can access LPS8-V2 using serial USB =
670 -
671 -
672 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
673 -
674 -Port 1 of the UART on the LPS8-V2 is GND
675 -
676 -(% class="box infomessage" %)
677 -(((
678 678  **TXD  <~-~--> UART RXD (Gray line)**
679 679  
680 680  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -682,10 +682,13 @@
682 682  **GND <~-~--> GND (Black line)**
683 683  )))
684 684  
429 +
685 685  **LPS8v2 UART connection photo**
686 686  
687 -[[image:image-20230421094319-2.png||height="351" width="392"]]
432 +[[image:image-20220804163015-1.png||height="621" width="466"]]
688 688  
434 +
435 +
689 689  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
690 690  
691 691  
... ... @@ -695,209 +695,109 @@
695 695  [[image:image-20220804164747-2.png||height="622" width="594"]]
696 696  
697 697  
698 -= 7. OTA System Update =
699 699  
446 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
700 700  
701 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
702 702  
449 +== **Step 1: Configure Frequency Band** ==
703 703  
704 -== 7.1 Auto-update method ==
705 705  
452 +//Each country has a requirement for frequency region. Choose the right one for your area.//
706 706  
707 -The default, each gateway will enable the auto-update function.
454 +[[image:image-20220905164308-1.png]]
708 708  
709 -this function will be triggered every boot and every midnight.
710 710  
711 711  
712 -Users can enable/disable it via Web Page
458 +== **Step 2: Configure the forward address** ==
713 713  
714 -[[image:image-20230607094447-2.png]]
715 715  
461 +**Select one of the servers to configure.**
716 716  
717 -== 7.2 Manual upgrade method ==
463 +**For example:**
718 718  
465 +[[image:image-20220905164847-2.png]]
719 719  
720 -1). Using the Linux command to upgrade the system
721 721  
722 722  
723 -(% class="box infomessage" %)
724 -(((
725 -**apt update && apt install *dragino***
726 -)))
469 +== **Step 3: Download and Install the Helium-gateway-rs** ==
727 727  
728 728  
729 -2). Upgrade the system via the Web page button of "Manual Update"
472 +**Access the gateway CLI via SSH.**
730 730  
474 +[[image:image-20220905165222-3.png]]
731 731  
732 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
733 733  
734 -[[image:image-20230607093849-1.png]]
477 +**Download gateway-rs.**
735 735  
479 +[[image:image-20220905165715-5.png]]
736 736  
737 -
738 -= 8. FAQ =
739 -
740 -== 8.1 How to change Hostname ==
741 -
742 -
743 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
744 -
745 745  (% class="box infomessage" %)
746 746  (((
747 -hostnamectl set-hostname dragino-123456
483 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
748 748  )))
749 749  
750 -[[image:image-20230517102429-1.png]]
751 751  
752 -After the configuration is complete, run "reboot" to restart the gateway.
487 +**Install gateway-rs.**
753 753  
489 +[[image:image-20220905165917-7.png]]
754 754  
755 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
756 -
757 -
758 -Migrate guide:
759 -
760 -To stabilize the completion of the migration, The users can migrate in one of the following ways
761 -
762 -**Method 1. Using the Linux shell, **
763 -
764 -**Method 2. Flash a new image with the Chirpstack**
765 -
766 -
767 -
768 -=== Method 1: Using the Linux shell ===
769 -
770 770  (% class="box infomessage" %)
771 771  (((
772 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
493 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
773 773  )))
774 774  
775 775  
497 +**Modify configuration.**
776 776  
777 -=== Method 2: Flash a new image ===
778 778  
779 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
500 +[[image:image-20220905173847-12.png]]
780 780  
781 781  
782 -
783 -== 8.3 How to reduce the 4g data consumed ==
784 -
785 -
786 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
787 -
788 -[[image:image-20230719100239-1.png||height="724" width="994"]]
789 -
790 -
791 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
792 -
793 -[[image:image-20230719100332-2.png]]
794 -
795 -
796 -3. Disable the auto-update:
797 -
798 -[[image:image-20230719100419-3.png||height="458" width="995"]]
799 -
800 -
801 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
802 -
803 -
804 804  (% class="box infomessage" %)
805 805  (((
806 -apt update && apt install helium-gateway
505 +**region=<Enter regional parameters> \
506 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
507 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
807 807  )))
808 808  
809 809  
810 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
511 +**Restart the helium_gateway**
811 811  
513 +[[image:image-20220905170920-9.png]]
812 812  
813 -By default, the LPS8v2's built-in server is ChirpStack v4,
814 814  
815 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
816 -
817 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
818 -
819 -
820 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
821 -
822 -
823 -== 8.6 How do I view gateway logs ==
824 -
825 -=== 8.6.1 LoRaWAN Log: ===
826 -
827 -==== Semtech UDP Log : ====
828 -
829 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
830 -
831 -[[image:image-20231017112115-2.png||height="611" width="821"]]
832 -
833 -
834 -==== Station Log: ====
835 -
836 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
837 -
838 -[[image:image-20231017111606-1.png||height="622" width="821"]]
839 -
840 -
841 -=== 8.6.2  4G Log ===
842 -
843 -The user needs to access the Linux console of the gateway and enter the following command:
844 -
845 845  (% class="box infomessage" %)
846 846  (((
847 -cat /var/log/qmilog.txt
518 +**systemctl restart helium_gateway**
848 848  )))
849 849  
850 -[[image:image-20231017114417-3.png||height="543" width="679"]]
851 851  
522 +**Check the helium_gateway Log：**
852 852  
853 -=== 8.6.3 Dmesg Log ===
524 +[[image:image-20220905173952-13.png]]
854 854  
855 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
856 856  
857 -[[image:image-20231017115330-5.png||height="565" width="740"]]
858 -
859 -
860 -=== 8.6.4 Record Log ===
861 -
862 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
863 -
864 -[[image:image-20231017115124-4.png||height="215" width="880"]]
865 -
866 -
867 -=== 8.6.5 View gateway logs via Linux Command ===
868 -
869 -**Semtech UDP Log :**
870 -
871 871  (% class="box infomessage" %)
872 872  (((
873 -**journalctl -u draginofwd -f**
529 +**journalctl -u helium_gateway -f**
874 874  )))
875 875  
876 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
877 877  
533 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
878 878  
879 -**Station Log:**
535 +where the helium gateway log is shown:
880 880  
881 -(% class="box infomessage" %)
882 -(((
883 -**tail -f /var/log/station.log **
884 -)))
537 +[[image:image-20220905174534-14.png]]
885 885  
886 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
887 887  
540 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
888 888  
889 -**Dmesg Log:**
890 890  
891 -(% class="box infomessage" %)
892 -(((
893 -**dmesg**
894 -)))
895 895  
896 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
544 += **7. Trouble Shooting** =
897 897  
898 -= 9. Trouble Shooting =
899 899  
900 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
547 +== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
901 901  
902 902  
903 903  [[image:image-20220920135918-1.png]]
... ... @@ -915,87 +915,21 @@
915 915  [[image:image-20220920141936-2.png]]
916 916  
917 917  
918 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
919 919  
920 920  
921 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
567 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
922 922  
923 -[[image:image-20230508171607-1.png]]
924 924  
925 -
926 -== 9.3  Fallback IP does not work, how can users check ==
927 -
928 -
929 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
930 -
931 -
932 -**1.Check whether the configuration is correct**
933 -
934 -Run the CMD command to ipconfig and ping 172.31.255.254.
935 -
936 -If this fails, the user needs to reconfigure.
937 -
938 -[[image:image-20230413170224-3.png||height="433" width="707"]]
939 -
940 -[[image:image-20230413170246-4.png]]
941 -
942 -
943 -**2. Check whether the firewall is disabled**
944 -
945 -If the firewall is not down, this will affect access to the gateway.
946 -
947 -
948 -== 9.4  Click "Manual_Update", why there is no response? ==
949 -
950 -
951 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
952 -
953 -
954 -[[image:image-20230527090555-3.png||height="660" width="832"]]
955 -
956 -
957 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
958 -
959 -
960 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
961 -
962 -
963 -(% class="box infomessage" %)
964 964  (((
965 -apt update && apt install *dragino*
966 -
967 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
571 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
968 968  )))
969 969  
970 -
971 -== 9.6  How to reset the built-in server ==
972 -
973 -
974 -**1) Build-in The Things Network**
975 -
976 -Refer to this link to delete the Built-in server's device.
977 -
978 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
979 -
980 -
981 -**2) Build-in Chirpstack**
982 -
983 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
984 -
985 -[[image:image-20231106180846-5.png||height="310" width="668"]]
986 -
987 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
988 -
989 -
990 990  (((
991 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
992 -)))
575 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
993 993  
994 -(((
995 -With your question as detailed as possible. We will reply and help you in the shortest.
996 996  
997 997  
998 -= 11. Reference =
579 += **9. Reference** =
999 999  
1000 1000  
1001 1001  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -1004,7 +1004,7 @@
1004 1004  
1005 1005  )))
1006 1006  
1007 -= 12. Order Info =
588 += **10. Order Info** =
1008 1008  
1009 1009  
1010 1010  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1012,33 +1012,26 @@
1012 1012  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
1013 1013  
1014 1014  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1015 -
1016 1016  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1017 -
1018 1018  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1019 -
1020 1020  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1021 -
1022 1022  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1023 -
1024 1024  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1025 1025  
1026 1026  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
1027 1027  
1028 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
604 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
605 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
606 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
607 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1029 1029  
1030 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1031 -
1032 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1033 -
1034 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1035 -
1036 1036  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1037 1037  
1038 1038  
1039 -= 13. Manufacturer Info =
1040 1040  
613 += **10. Manufacturer Info** =
1041 1041  
615 +
1042 1042  **Shenzhen Dragino Technology Development co. LTD**
1043 1043  
1044 1044  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -1046,9 +1046,10 @@
1046 1046  LongCheng Street, LongGang District ; Shenzhen 518116,China
1047 1047  
1048 1048  
1049 -= 14. FCC Warning =
1050 1050  
624 += **11. FCC Warning** =
1051 1051  
626 +
1052 1052  (((
1053 1053  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1054 1054  )))
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0