Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 290.3 >
edited by Xiaoling
on 2023/12/15 10:03
To version < 314.1 >
edited by Kilight Cao
on 2024/05/18 16:22
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== 1.1 What is LPS8v2 ==
21 +== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
22 22  
23 23  
24 24  (((
... ... @@ -96,11 +96,11 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
103 + ✓**  SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
... ... @@ -126,6 +126,13 @@
126 126  See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 127  
128 128  
129 +When the gateway restores the factory settings is complete,
130 +
131 +The WiFi configuration will enable WiFi Access Point by default.
132 +
133 +The other configuration will be restored to the default configuration.
134 +
135 +
129 129  = 2. Quick Start =
130 130  
131 131  
... ... @@ -153,7 +153,6 @@
153 153  [[image:image-20230527085250-2.png||height="495" width="284"]]
154 154  
155 155  
156 -
157 157  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
158 158  
159 159  
... ... @@ -168,7 +168,6 @@
168 168  [[image:image-20220622100129-1.png||height="332" width="1263"]]
169 169  
170 170  
171 -
172 172  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
173 173  
174 174  
... ... @@ -200,7 +200,6 @@
200 200  [[image:image-20230111094247-2.png||height="619" width="1250"]]
201 201  
202 202  
203 -
204 204  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
205 205  
206 206  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -240,7 +240,7 @@
240 240  
241 241  (% style="color:blue" %)**Password:   dragino**
242 242  
243 -[[image:image-20230106153501-1.png||height="367" width="894"]]
247 +[[image:image-20240318160845-1.png]]
244 244  
245 245  
246 246  == 2.2  Typical Network Setup ==
... ... @@ -303,6 +303,9 @@
303 303  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
304 304  
305 305  
310 +**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 +
312 +
306 306  === 2.2.5  Check Internet connection ===
307 307  
308 308  
... ... @@ -497,10 +497,24 @@
497 497  
498 498  [[image:image-20231031162927-2.png]]
499 499  
507 +=== 3.5.4 System ~-~-> Reboot / Reset ===
500 500  
501 -=== 3.5.4 System ~-~-> Remoteit ===
509 +In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
502 502  
511 +ETH LED will SOLID BULE Until the restore is finished.
503 503  
513 +When the gateway restores the factory settings is complete,
514 +
515 +The WiFi configuration will enable WiFi Access Point by default.
516 +
517 +The other configuration will be restored to the default configuration.
518 +
519 +[[image:image-20240203172853-1.png||height="365" width="901"]]
520 +
521 +
522 +=== 3.5.5 System ~-~-> Remoteit ===
523 +
524 +
504 504  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
505 505  
506 506  
... ... @@ -509,7 +509,7 @@
509 509  [[image:image-20221230092303-2.png]]
510 510  
511 511  
512 -=== 3.5.5 System ~-~-> Package Management ===
533 +=== 3.5.6 System ~-~-> Package Management ===
513 513  
514 514  
515 515  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -517,6 +517,38 @@
517 517  [[image:image-20230214094316-4.png]]
518 518  
519 519  
541 +== 3.5 Logread ==
542 +
543 +=== 3.5.1 LoRa Log ===
544 +
545 +
546 +In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
547 +
548 +[[image:image-20240416112509-1.png]]
549 +
550 +
551 +=== 3.5.2 Gateway Traffic ===
552 +
553 +In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
554 +
555 +[[image:image-20240416112618-2.png||height="705" width="1122"]]
556 +
557 +
558 +=== 3.5.3 System Log ===
559 +
560 +In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
561 +
562 +[[image:image-20240416112649-3.png||height="820" width="1122"]]
563 +
564 +
565 +=== 3.5.4 Record Log ===
566 +
567 +In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
568 +
569 +[[image:image-20240416112712-4.png||height="319" width="1128"]]
570 +
571 +
572 +
520 520  = 4. Build-in Server =
521 521  
522 522  After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
... ... @@ -650,7 +650,6 @@
650 650  
651 651  The uses can be via the below method to enable Watch Dog:
652 652  
653 -
654 654  (% class="box infomessage" %)
655 655  (((
656 656  wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
... ... @@ -659,7 +659,6 @@
659 659  [[image:image-20231124113209-1.png||height="470" width="1157"]]
660 660  
661 661  
662 -
663 663  = 6. How users can access LPS8-V2 using serial USB =
664 664  
665 665  
... ... @@ -713,7 +713,6 @@
713 713  
714 714  1). Using the Linux command to upgrade the system
715 715  
716 -
717 717  (% class="box infomessage" %)
718 718  (((
719 719  **apt update && apt install *dragino***
... ... @@ -722,18 +722,192 @@
722 722  
723 723  2). Upgrade the system via the Web page button of "Manual Update"
724 724  
775 +(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
725 725  
726 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
727 -
728 728  [[image:image-20230607093849-1.png]]
729 729  
730 730  
780 +(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
781 += 8. More Services =
731 731  
732 -= 8. FAQ =
783 +== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)8.1 NTP Service/Time Synchronization(%%) ==
733 733  
734 -== 8.1 How to change Hostname ==
785 +The gateway time sync service is provided by chrony service
735 735  
736 736  
788 +=== 1). Modify the NTP server address: ===
789 +
790 +(% class="box infomessage" %)
791 +(((
792 +Configuration file path:  /etc/chrony/chrony.conf
793 +)))
794 +
795 +
796 +=== 2). Start/Stop/Enable/Disable NTP service: ===
797 +
798 +(% class="box infomessage" %)
799 +(((
800 +systemctl start chrony
801 +\\systemctl stop chrony
802 +\\systemctl disable chrony
803 +\\systemctl enable chrony
804 +)))
805 +
806 +
807 +== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)8.2 How to connect the helium blockchain as a Data-only hotspot(%%) ==
808 +
809 +
810 +(% class="box infomessage" %)
811 +(((
812 +(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
813 +apt update && apt install helium-gateway
814 +)))
815 +
816 +
817 +(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
818 += 9. More features =
819 +
820 +(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
821 +== 9.1 How does the gateway connect to Chirpstack via MQTT Forwarder ==
822 +
823 +
824 +ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
825 +
826 +
827 +(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
828 +=== 9.1.1 Configure Packet Forwarder ===
829 +
830 +In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
831 +
832 +(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
833 +By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
834 +
835 +* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
836 +* Configure the following settings:
837 +** **Service Provider:** //Custom / Private LoRaWAN//
838 +** **Server Address:** localhost
839 +** **Uplink Port:** 1700
840 +** **Downlink Port:** 1700
841 +* Click **Save & Apply**
842 +
843 +[[image:image-20240518145929-2.png||height="652" width="727"]]
844 +
845 +
846 +(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
847 +=== 9.1.2 Install ChirpStack MQTT Forwarder ===
848 +
849 +==== ====
850 +
851 +(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
852 +(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
853 +
854 +First you must login into the gateway using SSH:
855 +
856 +(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
857 +(((
858 +ssh root@GATEWAY-IP-ADDRESS
859 +)))
860 +
861 +(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
862 +The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
863 +
864 +
865 +(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
866 +(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
867 +
868 +(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
869 +Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
870 +
871 +(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
872 +(((
873 +cd /tmp
874 +wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
875 +)))
876 +
877 +
878 +(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
879 +(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
880 +
881 +Use the dpkg package-manager to install the downloaded package. Example:
882 +
883 +(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
884 +(((
885 +dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
886 +)))
887 +
888 +[[image:image-20240518152148-4.png]]
889 +
890 +
891 +(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
892 +**Configuration**
893 +
894 +To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
895 +
896 +(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
897 +This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
898 +
899 +
900 +**ChirpStack MQTT Forwarder Setting:**
901 +
902 +(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
903 +(((
904 +topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
905 +
906 +server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
907 +)))
908 +
909 +username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
910 +
911 +
912 +Use commands to modify configuration files:
913 +
914 +(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
915 +(((
916 +vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
917 +)))
918 +
919 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
920 +
921 +
922 +**(Re)start and stop commands**
923 +
924 +Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
925 +
926 +(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
927 +(((
928 +# start
929 +
930 +(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
931 +systemctl start chirpstack-mqtt-forwarder
932 +
933 +# stop
934 +
935 +systemctl stop chirpstack-mqtt-forwarder
936 +
937 +# restart
938 +
939 +systemctl restart chirpstack-mqtt-forwarder
940 +)))
941 +
942 +(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
943 +(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
944 +
945 +
946 +**Check result**
947 +
948 +(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
949 +Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
950 +
951 +[[image:image-20240518154223-5.png]]
952 +
953 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
954 +
955 +
956 += (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10. FAQ(%%) =
957 +
958 +== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)10.1 How to change Hostname(%%) ==
959 +
960 +
737 737  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
738 738  
739 739  (% class="box infomessage" %)
... ... @@ -746,7 +746,7 @@
746 746  After the configuration is complete, run "reboot" to restart the gateway.
747 747  
748 748  
749 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
973 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
750 750  
751 751  
752 752  Migrate guide:
... ... @@ -758,7 +758,6 @@
758 758  **Method 2. Flash a new image with the Chirpstack**
759 759  
760 760  
761 -
762 762  === Method 1: Using the Linux shell ===
763 763  
764 764  (% class="box infomessage" %)
... ... @@ -767,16 +767,14 @@
767 767  )))
768 768  
769 769  
770 -
771 771  === Method 2: Flash a new image ===
772 772  
773 773  Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
774 774  
775 775  
998 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
776 776  
777 -== 8.3 How to reduce the 4g data consumed ==
778 778  
779 -
780 780  1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
781 781  
782 782  [[image:image-20230719100239-1.png||height="724" width="994"]]
... ... @@ -792,18 +792,9 @@
792 792  [[image:image-20230719100419-3.png||height="458" width="995"]]
793 793  
794 794  
795 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
1016 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
796 796  
797 797  
798 -(% class="box infomessage" %)
799 -(((
800 -apt update && apt install helium-gateway
801 -)))
802 -
803 -
804 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
805 -
806 -
807 807  By default, the LPS8v2's built-in server is ChirpStack v4,
808 808  
809 809  If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
... ... @@ -814,10 +814,11 @@
814 814  Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
815 815  
816 816  
817 -== 8.6 How do I view gateway logs ==
1029 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %).6 How do I view gateway logs(%%) ==
818 818  
819 -=== 8.6.1 LoRaWAN Log: ===
1031 +=== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %).6.1 LoRaWAN Log:(%%) ===
820 820  
1033 +
821 821  ==== Semtech UDP Log : ====
822 822  
823 823  When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
... ... @@ -832,10 +832,11 @@
832 832  [[image:image-20231017111606-1.png||height="622" width="821"]]
833 833  
834 834  
835 -=== 8.6.2  4G Log ===
1048 +=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)9.6.2  4G Log(%%) ===
836 836  
837 -The user needs to access the Linux console of the gateway and enter the following command:
838 838  
1051 +User needs to access the Linux console of the gateway and enter the following command:
1052 +
839 839  (% class="box infomessage" %)
840 840  (((
841 841  cat /var/log/qmilog.txt
... ... @@ -844,22 +844,48 @@
844 844  [[image:image-20231017114417-3.png||height="543" width="679"]]
845 845  
846 846  
847 -=== 8.6.3 Dmesg Log ===
1061 +LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
848 848  
1063 +Below are some commands as reference:
1064 +
1065 +>Usage:  /usr/bin/quectel-CM [options]
1066 +> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
1067 +> -p pincode Verify sim card pin if sim card is locked
1068 +> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
1069 +> -f logfilename Save log message of this program to file
1070 +> -u usbmonlog filename  Save usbmon log to file
1071 +> -i interface Specify which network interface to setup data call when multi-modems exits
1072 +> -4 Setup IPv4 data call (default)
1073 +> -6 Setup IPv6 data call
1074 +> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
1075 +> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
1076 +> -b Enable network interface bridge function (default 0)
1077 +> -v Verbose log mode, for debug purpose.[Examples]
1078 +>Example 1: /usr/bin/quectel-CM
1079 +>Example 2: /usr/bin/quectel-CM -s 3gnet
1080 +>Example 3: /usr/bin/quectel-CM -s 3gnet -v
1081 +
1082 +
1083 +
1084 +=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)9.6.3 Dmesg Log(%%) ===
1085 +
1086 +
849 849  Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
850 850  
851 851  [[image:image-20231017115330-5.png||height="565" width="740"]]
852 852  
853 853  
854 -=== 8.6.4 Record Log ===
1092 +=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)9.6.4 Record Log(%%) ===
855 855  
1094 +
856 856  Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
857 857  
858 858  [[image:image-20231017115124-4.png||height="215" width="880"]]
859 859  
860 860  
861 -=== 8.6.5 View gateway logs via Linux Command ===
1100 +=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)9.6.5 View gateway logs via Linux Command(%%) ===
862 862  
1102 +
863 863  **Semtech UDP Log :**
864 864  
865 865  (% class="box infomessage" %)
... ... @@ -889,11 +889,21 @@
889 889  
890 890  [[image:image-20231207145210-3.png||height="310" width="1021"]]
891 891  
892 -= 9. Trouble Shooting =
893 893  
894 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1133 +== (% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %)9.5 DIN Mount Reference:(%%) ==
895 895  
896 896  
1136 +[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1137 +
1138 +[[image:image-20240318095617-2.png]]
1139 +
1140 +
1141 +
1142 +
1143 += (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)10. Trouble Shooting(%%) =
1144 +
1145 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1146 +
897 897  [[image:image-20220920135918-1.png]]
898 898  
899 899  
... ... @@ -909,7 +909,7 @@
909 909  [[image:image-20220920141936-2.png]]
910 910  
911 911  
912 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1162 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
913 913  
914 914  
915 915  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -917,13 +917,13 @@
917 917  [[image:image-20230508171607-1.png]]
918 918  
919 919  
920 -== 9.3  Fallback IP does not work, how can users check ==
1170 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
921 921  
922 922  
923 923  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
924 924  
925 925  
926 -**1.Check whether the configuration is correct**
1176 +**~1. Check whether the configuration is correct**
927 927  
928 928  Run the CMD command to ipconfig and ping 172.31.255.254.
929 929  
... ... @@ -939,7 +939,7 @@
939 939  If the firewall is not down, this will affect access to the gateway.
940 940  
941 941  
942 -== 9.4  Click "Manual_Update", why there is no response? ==
1192 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
943 943  
944 944  
945 945  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -948,12 +948,11 @@
948 948  [[image:image-20230527090555-3.png||height="660" width="832"]]
949 949  
950 950  
951 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
1201 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
952 952  
953 953  
954 954  Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
955 955  
956 -
957 957  (% class="box infomessage" %)
958 958  (((
959 959  apt update && apt install *dragino*
... ... @@ -962,7 +962,7 @@
962 962  )))
963 963  
964 964  
965 -== 9.6  How to reset the built-in server ==
1214 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
966 966  
967 967  
968 968  **1) Build-in The Things Network**
... ... @@ -978,9 +978,10 @@
978 978  
979 979  [[image:image-20231106180846-5.png||height="310" width="668"]]
980 980  
981 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
982 982  
1231 += (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
983 983  
1233 +
984 984  (((
985 985  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
986 986  )))
image-20240203172853-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +71.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0