Last modified by Kilight Cao on 2025/02/08 14:05
<
From version < 287.1 >
edited by Kilight Cao
on 2023/12/07 14:46
To version < 114.1 >
edited by Kilight Cao
on 2022/11/04 15:44
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,18 +57,18 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
70 70  
71 71  
71 +== **1.3 Features** ==
72 +
73 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -81,84 +81,74 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
88 88  
89 89  
90 -LPS8-V2 has totally four LEDs, They are:
91 +== **1.4 Block Diagram** ==
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
95 +== **1.5 LED Indicators** ==
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
98 +LPS8-V2 has totally four LEDs, They are:
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
101 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
103 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
106 106  
105 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
107 107  
108 -== 1.5 Button Intruction ==
107 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
109 109  
109 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
110 110  
111 -LPS8-V2 has a black toggle button, which is:
111 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
113 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
113 113  
114 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
117 117  
117 +== **1.6 Button Intruction** ==
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
120 +LPS8-V2 has a black toggle button, which is:
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
123 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
125 125  
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
125 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
127 127  
128 128  
129 -= 2. Quick Start =
128 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
130 130  
130 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
131 131  
132 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
133 133  
134 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
135 135  
134 += **2. Quick Start** =
136 136  
137 -== 2.1 Access and Configure LPS8-V2 ==
138 138  
139 -=== 2.1.1 Find IP address of LPS8-V2 ===
137 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
140 140  
139 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
141 141  
142 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
143 143  
144 144  
145 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
143 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
146 146  
147 -(% style="background-color:yellow" %)**dragino+dragino**
148 148  
149 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
146 +== **2.1.1 connect the network.** ==
150 150  
151 -[[image:image-20230527084515-1.png]]
152 152  
153 -[[image:image-20230527085250-2.png||height="495" width="284"]]
149 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
154 154  
155 155  
156 -
157 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
158 -
159 -
160 160  (((
161 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
153 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
162 162  )))
163 163  
164 164  (((
... ... @@ -169,40 +169,9 @@
169 169  
170 170  
171 171  
172 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
164 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
173 173  
174 174  
175 -[[image:image-20230107084650-2.png||height="310" width="839"]]
176 -
177 -
178 -(% style="color:blue" %)**Steps to connect via fallback IP:**
179 -
180 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
181 -
182 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
183 -
184 -
185 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
186 -
187 -
188 -As in the below photo:
189 -
190 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
191 -
192 -
193 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
194 -
195 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
196 -
197 -
198 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
199 -
200 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
201 -
202 -
203 -
204 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
205 -
206 206  [[image:image-20220622100542-2.png||height="369" width="1256"]]
207 207  
208 208  
... ... @@ -222,104 +222,13 @@
222 222  [[image:image-20220622102901-8.png||height="476" width="938"]]
223 223  
224 224  
225 -=== 2.1.2 Access Configure Web UI ===
226 226  
187 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
227 227  
228 -**Web Interface**
229 229  
230 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
190 +=== **2.2.1 Select your area frequency** ===
231 231  
232 232  
233 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
234 -
235 -You will see the login interface of LPS8-V2 as shown below.
236 -
237 -The account details for Web Login are:
238 -
239 -(% style="color:blue" %)**User Name: root**
240 -
241 -(% style="color:blue" %)**Password:   dragino**
242 -
243 -[[image:image-20230106153501-1.png||height="367" width="894"]]
244 -
245 -
246 -== 2.2  Typical Network Setup ==
247 -
248 -=== 2.2.1  Overview ===
249 -
250 -
251 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
252 -
253 -* **WAN Port Internet Mode**
254 -
255 -* **WiFi Client Mode**
256 -
257 -* **Cellular Mode**
258 -
259 -=== 2.2.2  Use WAN port to access Internet ===
260 -
261 -
262 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
263 -
264 -
265 -[[image:image-20230411100633-2.png||height="501" width="935"]]
266 -
267 -
268 -=== 2.2.3  Access the Internet as a WiFi Client ===
269 -
270 -
271 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
272 -
273 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
274 -
275 -[[image:image-20230411095739-1.png||height="264" width="691"]]
276 -
277 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
278 -
279 -
280 -=== 2.2.4  Use built-in 4G modem for internet access ===
281 -
282 -
283 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
284 -
285 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
286 -
287 -
288 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
289 -
290 -First, install the Micro SIM card as below direction
291 -
292 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
293 -
294 -
295 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
296 -
297 -
298 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
299 -
300 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
301 -
302 -
303 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
304 -
305 -
306 -=== 2.2.5  Check Internet connection ===
307 -
308 -
309 -In the **home** page, we can check the Internet connection.
310 -
311 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
312 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
313 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
314 -
315 -[[image:image-20230411101534-3.png||height="544" width="942"]]
316 -
317 -
318 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
319 -
320 -=== 2.3.1 Select your area frequency ===
321 -
322 -
323 323  (((
324 324  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
325 325  
... ... @@ -329,9 +329,10 @@
329 329  [[image:image-20220622103332-9.png||height="485" width="938"]]
330 330  
331 331  
332 -=== 2.3.2 Get the only gateway EUI ===
333 333  
203 +=== **2.2.2 Get the only gateway EUI** ===
334 334  
205 +
335 335  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
336 336  
337 337  
... ... @@ -353,9 +353,10 @@
353 353  [[image:image-20220622103956-12.png]]
354 354  
355 355  
356 -=== 2.3.3 Register the gateway to The Things Network ===
357 357  
228 +== **2.2.3 Register the gateway to The Things Network** ==
358 358  
230 +
359 359  **Login to The Things Network**
360 360  
361 361  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -369,30 +369,34 @@
369 369  **Get it online**
370 370  
371 371  
372 -= 3. Web Configure Pages =
373 373  
374 -== 3.1 Home ==
245 += **3. Web Configure Pages** =
375 375  
376 376  
377 -Shows the system running status:
248 +== **3.1 Home** ==
378 378  
250 +
251 +//Shows the system running status~://
252 +
379 379  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
380 380  
381 381  
382 -== 3.2 LoRa Settings ==
383 383  
384 -=== 3.2.1 LoRa ~-~-> LoRa ===
257 +== **3.2 LoRa Settings** ==
385 385  
386 386  
387 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
260 +=== **3.2.1 LoRa ~-~-> LoRa** ===
388 388  
389 -Different LPS8v2 hardware versions can support different frequency ranges:
390 390  
391 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
392 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
263 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
393 393  
265 +//Different LPS8v2 hardware versions can support different frequency ranges~://
266 +
267 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
268 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
269 +
394 394  (% class="wikigeneratedid" %)
395 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
271 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
396 396  
397 397  
398 398  (% class="wikigeneratedid" %)
... ... @@ -404,23 +404,26 @@
404 404  )))
405 405  
406 406  
407 -== 3.3 LoRaWAN Settings ==
408 408  
409 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
284 +== **3.3 LoRaWAN Settings** ==
410 410  
411 411  
412 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
287 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
413 413  
414 414  
290 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
291 +
292 +
415 415  [[image:image-20220616111932-2.png||height="516" width="672"]]
416 416  
417 417  
418 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
419 419  
297 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
420 420  
421 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
422 422  
300 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
423 423  
302 +
424 424  [[image:image-20220616113246-3.png||height="396" width="672"]]
425 425  
426 426  
... ... @@ -429,246 +429,117 @@
429 429  )))
430 430  
431 431  
432 -== 3.4 Network Settings ==
433 433  
434 -=== 3.4.1 Network ~-~-> WiFi ===
312 +== **3.4 Network Settings** ==
435 435  
436 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
437 437  
438 -[[image:image-20230619095946-1.png||height="332" width="827"]]
315 +=== **3.4.1 Network ~-~-> WiFi** ===
439 439  
440 440  
441 -=== 3.4.2 Network ~-~-> System Status ===
318 +[[image:image-20220616114756-4.png||height="251" width="669"]]
442 442  
443 443  
444 -[[image:image-20220820134112-2.png||height="539" width="668"]]
445 445  
322 +=== **3.4.2 Network ~-~-> System Status** ===
446 446  
447 -=== 3.4.3 Network ~-~-> Network ===
448 448  
325 +[[image:image-20220820134112-2.png||height="539" width="668"]]
449 449  
450 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
451 451  
452 -[[image:image-20230214093657-2.png||height="333" width="858"]]
453 453  
329 +=== **3.4.3 Network ~-~-> Firewall** ===
454 454  
455 -=== 3.4.4 Network ~-~-> Cellular ===
456 456  
332 +[[image:image-20220616115351-6.png||height="244" width="661"]]
457 457  
458 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
459 459  
460 -(% style="color:red" %)**Note: APN cannot be empty.**
461 461  
462 -[[image:image-20230228115126-1.png]]
336 +== **3.5 System** ==
463 463  
464 464  
465 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
339 +=== **3.5.1  System ~-~-> System Overview** ===
466 466  
467 -[[image:image-20230228115535-2.png||height="478" width="888"]]
468 468  
469 -
470 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
471 -
472 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
473 -
474 -
475 -== 3.5 System ==
476 -
477 -=== 3.5.1 System ~-~-> System Overview ===
478 -
479 -
480 480  Shows the system info:
481 481  
482 -[[image:image-20231031162854-1.png]]
344 +[[image:image-20220917144512-5.png||height="618" width="853"]]
483 483  
484 484  
485 -=== 3.5.2 System ~-~-> System General ===
486 486  
348 +=== **3.5.2 System ~-~-> Backup/Restore** ===
487 487  
488 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
489 489  
490 -In addition, Users can customize the FallBack IP address.
351 +[[image:image-20220917144725-6.png||height="208" width="869"]]
491 491  
492 -[[image:image-20230214094058-3.png]]
493 493  
494 494  
495 -=== 3.5.3 System ~-~-> Backup/Restore ===
355 += **4. Build-in Server** =
496 496  
497 497  
498 -[[image:image-20231031162927-2.png]]
358 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
499 499  
500 500  
501 -=== 3.5.4 System ~-~-> Remoteit ===
361 +[[image:image-20220820115644-1.png||height="217" width="778"]]
502 502  
503 503  
504 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
364 +(% style="color:red" %)**Note:**
505 505  
366 + **Path**: System ~-~-> Built-in Server
506 506  
507 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
508 508  
509 -[[image:image-20221230092303-2.png]]
369 +**Troubleshooting:**
510 510  
511 511  
512 -=== 3.5.5 System ~-~-> Package Management ===
372 +**~ 1. URL does not jump properly**
513 513  
374 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
514 514  
515 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
376 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
516 516  
517 -[[image:image-20230214094316-4.png]]
518 518  
519 519  
520 -= 4. Build-in Server =
380 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
521 521  
522 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
523 523  
383 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
524 524  
525 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
385 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
526 526  
527 -[[image:image-20231106180816-4.png||height="416" width="896"]]
528 528  
529 -[[image:image-20231201165904-1.png||height="466" width="899"]]
388 +Login account:
530 530  
531 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
390 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
532 532  
533 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
392 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
534 534  
535 535  
395 +[[image:image-20220725171719-1.png||height="570" width="769"]]
536 536  
537 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
538 538  
539 539  
540 -[[image:image-20230616175558-7.png||height="362" width="894"]]
399 +== **4.2 Application Server ~-~- Node-Red** ==
541 541  
542 -[[image:image-20231201170355-2.png||height="536" width="899"]]
543 543  
544 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
402 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
545 545  
546 546  
405 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
547 547  
548 -== **3). Troubleshooting:** ==
549 549  
408 +[[image:image-20220725172124-3.png||height="610" width="843"]]
550 550  
551 -* (((
552 -=== ** If the URL does not jump properly.** ===
553 -)))
554 554  
555 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
556 556  
557 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
412 += **5. How users can access LPS8v2 using serial USB** =
558 558  
559 559  
560 -* (((
561 -=== ** How to install InfluxDB, Garfana.** ===
562 -)))
415 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
563 563  
564 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
565 565  
418 +Port 1 of the UART on the LPS8v2 is GND
566 566  
567 -* (((
568 -=== ** How to upgrade the gateway node.js to the latest version.** ===
569 -)))
570 -
571 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
572 -
573 -
574 -* (((
575 -=== ** How to batch register device on the built-in Chirpstack network server** ===
576 -)))
577 -
578 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
579 -
580 -
581 -* (((
582 -=== ** Why my gateway is not Chirpstack?** ===
583 -)))
584 -
585 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
586 -
587 -
588 -* (((
589 -=== ** How to disable the built-in server** ===
590 -)))
591 -
592 592  (% class="box infomessage" %)
593 593  (((
594 -Use the following commands to start and stop the TTNv3 service:**     **
595 -
596 -**# start**
597 -systemctl start ttnstack
598 -
599 -**# stop**
600 -systemctl stop ttnstack
601 -
602 -**# enable**
603 -systemctl enable ttnstack
604 -
605 -**#disable**
606 -systemctl disable ttnstack
607 -)))
608 -
609 -(% class="box infomessage" %)
610 -(((
611 -Use the following commands to start and stop the Node-Red service:
612 -
613 -**# start**
614 -systemctl start nodered
615 -
616 -**# stop**
617 -systemctl stop nodered
618 -
619 -**# enable**
620 -systemctl enable nodered
621 -
622 -**#disable**
623 -systemctl disable nodered
624 -)))
625 -
626 -
627 -* (((
628 -=== ** How to choose the Chirpstack server frequency SubBand** ===
629 -)))
630 -
631 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
632 -
633 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
634 -
635 -[[image:image-20230602140406-3.png||height="480" width="918"]]
636 -
637 -
638 -When the configuration is complete, click** "Save&Apply"**.
639 -
640 -
641 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
642 -
643 -[[image:image-20230602143122-4.png||height="511" width="983"]]
644 -
645 -
646 -= 5. Watch Dog =
647 -
648 -
649 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
650 -
651 -The uses can be via the below method to enable Watch Dog:
652 -
653 -
654 -(% class="box infomessage" %)
655 -(((
656 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
657 -)))
658 -
659 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
660 -
661 -
662 -
663 -= 6. How users can access LPS8-V2 using serial USB =
664 -
665 -
666 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
667 -
668 -Port 1 of the UART on the LPS8-V2 is GND
669 -
670 -(% class="box infomessage" %)
671 -(((
672 672  **TXD  <~-~--> UART RXD (Gray line)**
673 673  
674 674  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -676,10 +676,13 @@
676 676  **GND <~-~--> GND (Black line)**
677 677  )))
678 678  
429 +
679 679  **LPS8v2 UART connection photo**
680 680  
681 -[[image:image-20230421094319-2.png||height="351" width="392"]]
432 +[[image:image-20220804163015-1.png||height="621" width="466"]]
682 682  
434 +
435 +
683 683  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
684 684  
685 685  
... ... @@ -689,177 +689,109 @@
689 689  [[image:image-20220804164747-2.png||height="622" width="594"]]
690 690  
691 691  
692 -= 7. OTA System Update =
693 693  
446 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
694 694  
695 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
696 696  
449 +== **Step 1: Configure Frequency Band** ==
697 697  
698 -== 7.1 Auto-update method ==
699 699  
452 +//Each country has a requirement for frequency region. Choose the right one for your area.//
700 700  
701 -The default, each gateway will enable the auto-update function.
454 +[[image:image-20220905164308-1.png]]
702 702  
703 -this function will be triggered every boot and every midnight.
704 704  
705 705  
706 -Users can enable/disable it via Web Page
458 +== **Step 2: Configure the forward address** ==
707 707  
708 -[[image:image-20230607094447-2.png]]
709 709  
461 +**Select one of the servers to configure.**
710 710  
711 -== 7.2 Manual upgrade method ==
463 +**For example:**
712 712  
465 +[[image:image-20220905164847-2.png]]
713 713  
714 -1). Using the Linux command to upgrade the system
715 715  
716 716  
717 -(% class="box infomessage" %)
718 -(((
719 -**apt update && apt install *dragino***
720 -)))
469 +== **Step 3: Download and Install the Helium-gateway-rs** ==
721 721  
722 722  
723 -2). Upgrade the system via the Web page button of "Manual Update"
472 +**Access the gateway CLI via SSH.**
724 724  
474 +[[image:image-20220905165222-3.png]]
725 725  
726 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
727 727  
728 -[[image:image-20230607093849-1.png]]
477 +**Download gateway-rs.**
729 729  
479 +[[image:image-20220905165715-5.png]]
730 730  
481 +(% class="box infomessage" %)
482 +(((
483 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
484 +)))
731 731  
732 -= 8. FAQ =
733 733  
734 -== 8.1 How to change Hostname ==
487 +**Install gateway-rs.**
735 735  
489 +[[image:image-20220905165917-7.png]]
736 736  
737 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
738 -
739 739  (% class="box infomessage" %)
740 740  (((
741 -hostnamectl set-hostname dragino-123456
493 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
742 742  )))
743 743  
744 -[[image:image-20230517102429-1.png]]
745 745  
746 -After the configuration is complete, run "reboot" to restart the gateway.
497 +**Modify configuration.**
747 747  
748 748  
749 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
500 +[[image:image-20220905173847-12.png]]
750 750  
751 751  
752 -Migrate guide:
753 -
754 -To stabilize the completion of the migration, The users can migrate in one of the following ways
755 -
756 -**Method 1. Using the Linux shell, **
757 -
758 -**Method 2. Flash a new image with the Chirpstack**
759 -
760 -
761 -
762 -=== Method 1: Using the Linux shell ===
763 -
764 764  (% class="box infomessage" %)
765 765  (((
766 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
505 +**region=<Enter regional parameters> \
506 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
507 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
767 767  )))
768 768  
769 769  
511 +**Restart the helium_gateway**
770 770  
771 -=== Method 2: Flash a new image ===
513 +[[image:image-20220905170920-9.png]]
772 772  
773 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
774 774  
775 -
776 -
777 -== 8.3 How to reduce the 4g data consumed ==
778 -
779 -
780 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
781 -
782 -[[image:image-20230719100239-1.png||height="724" width="994"]]
783 -
784 -
785 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
786 -
787 -[[image:image-20230719100332-2.png]]
788 -
789 -
790 -3. Disable the auto-update:
791 -
792 -[[image:image-20230719100419-3.png||height="458" width="995"]]
793 -
794 -
795 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
796 -
797 -
798 798  (% class="box infomessage" %)
799 799  (((
800 -apt update && apt install helium-gateway
518 +**systemctl restart helium_gateway**
801 801  )))
802 802  
803 803  
804 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
522 +**Check the helium_gateway Log：**
805 805  
524 +[[image:image-20220905173952-13.png]]
806 806  
807 -By default, the LPS8v2's built-in server is ChirpStack v4,
808 808  
809 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
810 -
811 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
812 -
813 -
814 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
815 -
816 -
817 -== 8.6 How do I view gateway logs ==
818 -
819 -=== 8.6.1 LoRaWAN Log: ===
820 -
821 -==== Semtech UDP Log : ====
822 -
823 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
824 -
825 -[[image:image-20231017112115-2.png||height="611" width="821"]]
826 -
827 -
828 -==== Station Log: ====
829 -
830 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
831 -
832 -[[image:image-20231017111606-1.png||height="622" width="821"]]
833 -
834 -
835 -=== 8.6.2  4G Log ===
836 -
837 -The user needs to access the Linux console of the gateway and enter the following command:
838 -
839 839  (% class="box infomessage" %)
840 840  (((
841 -cat /var/log/qmilog.txt
529 +**journalctl -u helium_gateway -f**
842 842  )))
843 843  
844 -[[image:image-20231017114417-3.png||height="543" width="679"]]
845 845  
846 -=== 8.6.3 Dmesg Log ===
533 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
847 847  
848 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
535 +where the helium gateway log is shown:
849 849  
850 -[[image:image-20231017115330-5.png||height="565" width="740"]]
537 +[[image:image-20220905174534-14.png]]
851 851  
852 852  
853 -=== 8.6.4 Record Log ===
540 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
854 854  
855 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
856 856  
857 -[[image:image-20231017115124-4.png||height="215" width="880"]]
858 858  
544 += **7. Trouble Shooting** =
859 859  
860 -= 9. Trouble Shooting =
861 861  
862 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
547 +== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
863 863  
864 864  
865 865  [[image:image-20220920135918-1.png]]
... ... @@ -877,87 +877,21 @@
877 877  [[image:image-20220920141936-2.png]]
878 878  
879 879  
880 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
881 881  
882 882  
883 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
567 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
884 884  
885 -[[image:image-20230508171607-1.png]]
886 886  
887 -
888 -== 9.3  Fallback IP does not work, how can users check ==
889 -
890 -
891 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
892 -
893 -
894 -**1.Check whether the configuration is correct**
895 -
896 -Run the CMD command to ipconfig and ping 172.31.255.254.
897 -
898 -If this fails, the user needs to reconfigure.
899 -
900 -[[image:image-20230413170224-3.png||height="433" width="707"]]
901 -
902 -[[image:image-20230413170246-4.png]]
903 -
904 -
905 -**2. Check whether the firewall is disabled**
906 -
907 -If the firewall is not down, this will affect access to the gateway.
908 -
909 -
910 -== 9.4  Click "Manual_Update", why there is no response? ==
911 -
912 -
913 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
914 -
915 -
916 -[[image:image-20230527090555-3.png||height="660" width="832"]]
917 -
918 -
919 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
920 -
921 -
922 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
923 -
924 -
925 -(% class="box infomessage" %)
926 926  (((
927 -apt update && apt install *dragino*
928 -
929 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
571 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
930 930  )))
931 931  
932 -
933 -== 9.6  How to reset the built-in server ==
934 -
935 -
936 -**1) Build-in The Things Network**
937 -
938 -Refer to this link to delete the Built-in server's device.
939 -
940 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
941 -
942 -
943 -**2) Build-in Chirpstack**
944 -
945 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
946 -
947 -[[image:image-20231106180846-5.png||height="310" width="668"]]
948 -
949 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
950 -
951 -
952 952  (((
953 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
954 -)))
575 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
955 955  
956 -(((
957 -With your question as detailed as possible. We will reply and help you in the shortest.
958 958  
959 959  
960 -= 11. Reference =
579 += **9. Reference** =
961 961  
962 962  
963 963  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -966,7 +966,7 @@
966 966  
967 967  )))
968 968  
969 -= 12. Order Info =
588 += **10. Order Info** =
970 970  
971 971  
972 972  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -974,33 +974,26 @@
974 974  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
975 975  
976 976  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
977 -
978 978  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
979 -
980 980  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
981 -
982 982  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
983 -
984 984  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
985 -
986 986  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
987 987  
988 988  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
989 989  
990 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
604 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
605 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
606 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
607 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
991 991  
992 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
993 -
994 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
995 -
996 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
997 -
998 998  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
999 999  
1000 1000  
1001 -= 13. Manufacturer Info =
1002 1002  
613 += **10. Manufacturer Info** =
1003 1003  
615 +
1004 1004  **Shenzhen Dragino Technology Development co. LTD**
1005 1005  
1006 1006  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -1008,9 +1008,10 @@
1008 1008  LongCheng Street, LongGang District ; Shenzhen 518116,China
1009 1009  
1010 1010  
1011 -= 14. FCC Warning =
1012 1012  
624 += **11. FCC Warning** =
1013 1013  
626 +
1014 1014  (((
1015 1015  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1016 1016  )))
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0