Changes for page LPS8v2 -- LoRaWAN Indoor Gateway User Manual

Last modified by Kilight Cao on 2024/12/31 16:31

From version < 284.1 >

edited by Xiaoye
on 2023/12/04 14:05

To version < 314.1 >

edited by Kilight Cao
on 2024/05/18 16:22

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (3 modified, 0 added, 0 removed)
Attachments (0 modified, 17 added, 0 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--LPS8v2 LoRaWAN Indoor Gateway User Manual
++LPS8v2 -- LoRaWAN Indoor Gateway User Manual

Author

@@ -1,1 +1,1 @@
--XWiki.Xiaoye
++XWiki.Kilight

Content

@@ -8,7 +8,7 @@
  )))
--**Table of Contents：**
++**Table of Contents:**
  {{toc/}}
@@ -18,7 +18,7 @@
  = 1. Introduction =
--== 1.1 What is LPS8v2 ==
++== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
  (((
@@ -96,11 +96,11 @@
  (% style="color:blue" %)**➢ SYS LED**(%%):   This RGB LED will show different colors in different states:
--                     ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
++                     ✓    **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
--                     ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
++                     ✓    **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
--                     ✓** SOLID RED:** Device doesn't have an Internet connection.
++                     ✓**    SOLID RED:** Device doesn't have an Internet connection.
  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
@@ -126,6 +126,13 @@
  See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
++When the gateway restores the factory settings is complete,
++
++The WiFi configuration will enable WiFi Access Point by default.
++
++The other configuration will be restored to the default configuration.
++
++
  = 2. Quick Start =
@@ -153,7 +153,6 @@
  [[image:image-20230527085250-2.png||height="495" width="284"]]
--
  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
@@ -168,7 +168,6 @@
  [[image:image-20220622100129-1.png||height="332" width="1263"]]
--
  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
@@ -200,7 +200,6 @@
  [[image:image-20230111094247-2.png||height="619" width="1250"]]
--
  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
  [[image:image-20220622100542-2.png||height="369" width="1256"]]
@@ -240,7 +240,7 @@
  (% style="color:blue" %)**Password:   dragino**
--[[image:image-20230106153501-1.png||height="367" width="894"]]
++[[image:image-20240318160845-1.png]]
  == 2.2  Typical Network Setup ==
@@ -303,6 +303,9 @@
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
++**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
++
++
  === 2.2.5  Check Internet connection ===
@@ -497,10 +497,24 @@
  [[image:image-20231031162927-2.png]]
++=== 3.5.4 System ~-~-> Reboot / Reset ===
--=== 3.5.4 System ~-~-> Remoteit ===
++In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
++ETH LED will SOLID BULE Until the restore is finished.
++When the gateway restores the factory settings is complete,
++
++The WiFi configuration will enable WiFi Access Point by default.
++
++The other configuration will be restored to the default configuration.
++
++[[image:image-20240203172853-1.png||height="365" width="901"]]
++
++
++=== 3.5.5 System ~-~-> Remoteit ===
++
++
  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
@@ -509,7 +509,7 @@
  [[image:image-20221230092303-2.png]]
--=== 3.5.5 System ~-~-> Package Management ===
++=== 3.5.6 System ~-~-> Package Management ===
  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
@@ -517,6 +517,38 @@
  [[image:image-20230214094316-4.png]]
++== 3.5 Logread ==
++
++=== 3.5.1 LoRa Log ===
++
++
++In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
++
++[[image:image-20240416112509-1.png]]
++
++
++=== 3.5.2 Gateway Traffic ===
++
++In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
++
++[[image:image-20240416112618-2.png||height="705" width="1122"]]
++
++
++=== 3.5.3 System Log ===
++
++In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
++
++[[image:image-20240416112649-3.png||height="820" width="1122"]]
++
++
++=== 3.5.4 Record Log ===
++
++In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
++
++[[image:image-20240416112712-4.png||height="319" width="1128"]]
++
++
++
  = 4. Build-in Server =
  After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
@@ -650,7 +650,6 @@
  The uses can be via the below method to enable Watch Dog:
--
  (% class="box infomessage" %)
  (((
  wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
@@ -659,7 +659,6 @@
  [[image:image-20231124113209-1.png||height="470" width="1157"]]
--
  = 6. How users can access LPS8-V2 using serial USB =
@@ -713,7 +713,6 @@
 ). Using the Linux command to upgrade the system
--
  (% class="box infomessage" %)
  (((
  **apt update && apt install *dragino***
@@ -722,92 +722,250 @@
 ). Upgrade the system via the Web page button of "Manual Update"
++(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
--**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
--
  [[image:image-20230607093849-1.png]]
++(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
++= 8. More Services =
--= 8. FAQ =
++== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)8.1 NTP Service/Time Synchronization(%%) ==
--== 8.1 How to change Hostname ==
++The gateway time sync service is provided by chrony service
--By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
++=== 1). Modify the NTP server address: ===
  (% class="box infomessage" %)
  (((
--hostnamectl set-hostname dragino-123456
++Configuration file path:   /etc/chrony/chrony.conf
  )))
--[[image:image-20230517102429-1.png]]
--After the configuration is complete, run "reboot" to restart the gateway.
++=== 2). Start/Stop/Enable/Disable NTP service: ===
++(% class="box infomessage" %)
++(((
++systemctl start chrony
++\\systemctl stop chrony
++\\systemctl disable chrony
++\\systemctl enable chrony
++)))
--== 8.2 Build-in The Things Network migrate to ChirpStack ==
++== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)8.2 How to connect the helium blockchain as a Data-only hotspot(%%) ==
--Migrate guide:
--**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
++(% class="box infomessage" %)
++(((
++(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
++apt update && apt install helium-gateway
++)))
--**2. On the Server ~-~-> Network Server interface, click "Management"**
--[[image:image-20230616162454-1.png]]
++(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
++= 9. More features =
++(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
++== 9.1 How does the gateway connect to Chirpstack via MQTT Forwarder ==
--**3. Click "Migrate-Chirpstack"**
--[[image:image-20230616162742-2.png]]
++ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
--**4. Strat Install **
++(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
++=== 9.1.1 Configure Packet Forwarder ===
--Click start Install and wait until the migration succeeds
++In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
--[[image:image-20230616162934-3.png]]
++(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
++By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
++* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
++* Configure the following settings:
++** **Service Provider:** //Custom / Private LoRaWAN//
++** **Server Address:** localhost
++** **Uplink Port:** 1700
++** **Downlink Port:** 1700
++* Click **Save & Apply**
--**5.Migration complete check result**
++[[image:image-20240518145929-2.png||height="652" width="727"]]
--[[image:image-20230616174526-4.png||height="706" width="983"]]
++(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
++=== 9.1.2 Install ChirpStack MQTT Forwarder ===
--[[image:image-20230616180004-9.png]]
++====   ====
++(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
++(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
--== 8.3 How to reduce the 4g data consumed ==
++First you must login into the gateway using SSH:
++(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
++(((
++ssh root@GATEWAY-IP-ADDRESS
++)))
--1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
++(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
++The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
--[[image:image-20230719100239-1.png||height="724" width="994"]]
++(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
++(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
--2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
++(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
++Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
--[[image:image-20230719100332-2.png]]
++(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
++(((
++cd /tmp
++wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
++)))
--3. Disable the auto-update:
++(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
++(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
--[[image:image-20230719100419-3.png||height="458" width="995"]]
++Use the dpkg package-manager to install the downloaded package. Example:
++(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
++(((
++dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
++)))
--== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
++[[image:image-20240518152148-4.png]]
++(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
++**Configuration**
++
++To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
++
++(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
++This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
++
++
++**ChirpStack MQTT Forwarder Setting:**
++
++(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
++(((
++topic_prefix         ~-~->     This corresponds to the frequency of the ChirpStack server
++
++server                  ~-~->     Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
++)))
++
++username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
++
++
++Use commands to modify configuration files:
++
++(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
++(((
++vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
++)))
++
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
++
++
++**(Re)start and stop commands**
++
++Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
++
++(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
++(((
++# start
++
++(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
++systemctl start chirpstack-mqtt-forwarder
++
++# stop
++
++systemctl stop chirpstack-mqtt-forwarder
++
++# restart
++
++systemctl restart chirpstack-mqtt-forwarder
++)))
++
++(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
++(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
++
++
++**Check result**
++
++(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
++Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
++
++[[image:image-20240518154223-5.png]]
++
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
++
++
++= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10. FAQ(%%) =
++
++== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)10.1 How to change Hostname(%%) ==
++
++
++By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
++
  (% class="box infomessage" %)
  (((
--apt update && apt install helium-gateway
++hostnamectl set-hostname dragino-123456
  )))
++[[image:image-20230517102429-1.png]]
--== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
++After the configuration is complete, run "reboot" to restart the gateway.
++== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
++
++
++Migrate guide:
++
++To stabilize the completion of the migration, The users can migrate in one of the following ways
++
++**Method 1. Using the Linux shell, **
++
++**Method 2. Flash a new image with the Chirpstack**
++
++
++=== Method 1: Using the Linux shell ===
++
++(% class="box infomessage" %)
++(((
++wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
++)))
++
++
++=== Method 2: Flash a new image ===
++
++Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
++
++
++== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
++
++
++1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
++
++[[image:image-20230719100239-1.png||height="724" width="994"]]
++
++
++2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
++
++[[image:image-20230719100332-2.png]]
++
++
++3. Disable the auto-update:
++
++[[image:image-20230719100419-3.png||height="458" width="995"]]
++
++
++== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
++
++
  By default, the LPS8v2's built-in server is ChirpStack v4,
  If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
@@ -818,10 +818,11 @@
  Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
--== 8.6 How do I view gateway logs ==
++== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %).6 How do I view gateway logs(%%) ==
--=== 8.6.1 LoRaWAN Log: ===
++=== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)10(% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %).6.1 LoRaWAN Log:(%%) ===
++
  ==== Semtech UDP Log : ====
  When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
@@ -836,10 +836,11 @@
  [[image:image-20231017111606-1.png||height="622" width="821"]]
--=== 8.6.2  4G Log ===
++=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)9.6.2  4G Log(%%) ===
--The user needs to access the Linux console of the gateway and enter the following command:
++User needs to access the Linux console of the gateway and enter the following command:
++
  (% class="box infomessage" %)
  (((
  cat /var/log/qmilog.txt
@@ -847,25 +847,93 @@
  [[image:image-20231017114417-3.png||height="543" width="679"]]
--=== 8.6.3 Dmesg Log ===
++LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
++
++Below are some commands as reference:
++
++>Usage:  /usr/bin/quectel-CM [options]
++>     -s [apn [user password auth]]          Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
++>     -p pincode                             Verify sim card pin if sim card is locked
++>     -p [quectel-][qmi|mbim]-proxy          Request to use proxy
++>     -f logfilename                         Save log message of this program to file
++>     -u usbmonlog filename                  Save usbmon log to file
++>     -i interface                           Specify which network interface to setup data call when multi-modems exits
++>     -4                                     Setup IPv4 data call (default)
++>     -6                                     Setup IPv6 data call
++>     -k pdn                                 Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
++>     -m iface-idx                           Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
++>     -b                                     Enable network interface bridge function (default 0)
++>     -v                                     Verbose log mode, for debug purpose.[Examples]
++>Example 1: /usr/bin/quectel-CM
++>Example 2: /usr/bin/quectel-CM -s 3gnet
++>Example 3: /usr/bin/quectel-CM -s 3gnet -v
++
++
++
++=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)9.6.3 Dmesg Log(%%) ===
++
++
  Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
  [[image:image-20231017115330-5.png||height="565" width="740"]]
--=== 8.6.4 Record Log ===
++=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)9.6.4 Record Log(%%) ===
++
  Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
  [[image:image-20231017115124-4.png||height="215" width="880"]]
--= 9. Trouble Shooting =
++=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)9.6.5 View gateway logs via Linux Command(%%) ===
--== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
++**Semtech UDP Log :**
++(% class="box infomessage" %)
++(((
++**journalctl -u draginofwd -f**
++)))
++
++[[image:image-20231207144627-1.png||height="371" width="1017"]]
++
++
++**Station Log:**
++
++(% class="box infomessage" %)
++(((
++**tail -f /var/log/station.log **
++)))
++
++[[image:image-20231207144758-2.png||height="132" width="1022"]]
++
++
++**Dmesg Log:**
++
++(% class="box infomessage" %)
++(((
++**dmesg**
++)))
++
++[[image:image-20231207145210-3.png||height="310" width="1021"]]
++
++
++== (% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %)9.5 DIN Mount Reference:(%%) ==
++
++
++[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
++
++[[image:image-20240318095617-2.png]]
++
++
++
++
++= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)10. Trouble Shooting(%%) =
++
++== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
++
  [[image:image-20220920135918-1.png]]
@@ -881,7 +881,7 @@
  [[image:image-20220920141936-2.png]]
--== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
++== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
@@ -889,13 +889,13 @@
  [[image:image-20230508171607-1.png]]
--== 9.3  Fallback IP does not work, how can users check ==
++== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
--**1.Check whether the configuration is correct**
++**~1. Check whether the configuration is correct**
  Run the CMD command to ipconfig and ping 172.31.255.254.
@@ -911,7 +911,7 @@
  If the firewall is not down, this will affect access to the gateway.
--== 9.4  Click "Manual_Update", why there is no response? ==
++== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
@@ -920,12 +920,11 @@
  [[image:image-20230527090555-3.png||height="660" width="832"]]
--== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
++== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
  Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
--
  (% class="box infomessage" %)
  (((
  apt update && apt install *dragino*
@@ -934,7 +934,7 @@
  )))
--== 9.6  How to reset the built-in server ==
++== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)10(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
  **1) Build-in The Things Network**
@@ -950,9 +950,10 @@
  [[image:image-20231106180846-5.png||height="310" width="668"]]
--= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
++= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
++
  (((
  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
  )))

image-20231207144627-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+182.9 KB

Content

image-20231207144758-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+51.0 KB

Content

image-20231207145210-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+104.4 KB

Content

image-20240203172853-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+24.5 KB

Content

image-20240318095605-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+37.3 KB

Content

image-20240318095617-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+32.9 KB

Content

image-20240318160845-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+36.5 KB

Content

image-20240416112509-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+82.7 KB

Content

image-20240416112618-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+128.5 KB

Content

image-20240416112649-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+119.8 KB

Content

image-20240416112712-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+29.6 KB

Content

image-20240416112948-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+29.6 KB

Content

image-20240518145859-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+59.7 KB

Content

image-20240518145929-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+59.5 KB

Content

image-20240518152100-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+39.5 KB

Content

image-20240518152148-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+78.0 KB

Content

image-20240518154223-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+71.7 KB

Content

Changes for page LPS8v2 -- LoRaWAN Indoor Gateway User Manual

Summary

Details

Applications

Navigation