Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 281.1 >
edited by Xiaoye
on 2023/12/01 18:06
To version < 212.2 >
edited by Xiaoling
on 2023/06/06 09:12
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -66,6 +66,8 @@
66 66  * Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 +
70 +
69 69  == 1.3 Features ==
70 70  
71 71  
... ... @@ -81,12 +81,18 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
88 88  
89 89  
91 +== 1.4 Block Diagram ==
92 +
93 +
94 +
95 +== 1.5 LED Indicators ==
96 +
97 +
90 90  LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
... ... @@ -105,7 +105,7 @@
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
107 107  
108 -== 1.5 Button Intruction ==
116 +== 1.6 Button Intruction ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -121,11 +121,6 @@
121 121   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 129  = 2. Quick Start =
130 130  
131 131  
... ... @@ -134,9 +134,9 @@
134 134  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
135 135  
136 136  
137 -== 2.1 Access and Configure LPS8-V2 ==
140 +== 2.1 Connects to the network and accesses the gateway Web UI ==
138 138  
139 -=== 2.1.1 Find IP address of LPS8-V2 ===
142 +=== 2.1.1 connect the network ===
140 140  
141 141  
142 142  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -192,7 +192,7 @@
192 192  
193 193  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
194 194  
195 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
198 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
196 196  
197 197  
198 198  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -256,6 +256,8 @@
256 256  
257 257  * **Cellular Mode**
258 258  
262 +
263 +
259 259  === 2.2.2  Use WAN port to access Internet ===
260 260  
261 261  
... ... @@ -433,9 +433,8 @@
433 433  
434 434  === 3.4.1 Network ~-~-> WiFi ===
435 435  
436 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
437 437  
438 -[[image:image-20230619095946-1.png||height="332" width="827"]]
442 +[[image:image-20220616114756-4.png||height="251" width="669"]]
439 439  
440 440  
441 441  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -462,16 +462,11 @@
462 462  [[image:image-20230228115126-1.png]]
463 463  
464 464  
465 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
469 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
466 466  
467 467  [[image:image-20230228115535-2.png||height="478" width="888"]]
468 468  
469 469  
470 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
471 -
472 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
473 -
474 -
475 475  == 3.5 System ==
476 476  
477 477  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -479,7 +479,7 @@
479 479  
480 480  Shows the system info:
481 481  
482 -[[image:image-20231031162854-1.png]]
481 +[[image:image-20220917144512-5.png||height="618" width="853"]]
483 483  
484 484  
485 485  === 3.5.2 System ~-~-> System General ===
... ... @@ -495,7 +495,7 @@
495 495  === 3.5.3 System ~-~-> Backup/Restore ===
496 496  
497 497  
498 -[[image:image-20231031162927-2.png]]
497 +[[image:image-20220917144725-6.png||height="208" width="869"]]
499 499  
500 500  
501 501  === 3.5.4 System ~-~-> Remoteit ===
... ... @@ -519,68 +519,96 @@
519 519  
520 520  = 4. Build-in Server =
521 521  
522 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
523 523  
522 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
524 524  
525 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
526 526  
527 -[[image:image-20231106180816-4.png||height="416" width="896"]]
525 +[[image:image-20230214095318-5.png||height="347" width="980"]]
528 528  
529 -[[image:image-20231201165904-1.png||height="466" width="899"]]
530 530  
531 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
528 +(% style="color:red" %)**Note:**
532 532  
533 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
530 + **Path**: System ~-~-> Built-in Server
534 534  
535 535  
533 +**Troubleshooting:**
536 536  
537 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
538 538  
536 +**~ 1. URL does not jump properly**
539 539  
540 -[[image:image-20230616175558-7.png||height="362" width="894"]]
538 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
541 541  
542 -[[image:image-20231201170355-2.png||height="536" width="899"]]
540 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
543 543  
544 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
545 545  
543 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
546 546  
547 547  
548 -== **2). Troubleshooting:** ==
546 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
549 549  
548 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
550 550  
551 -=== **1. If the URL does not jump properly.** ===
552 552  
553 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
551 +Login account:
554 554  
555 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
553 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
556 556  
555 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
557 557  
558 -=== **2. How to install InfluxDB, Garfana.** ===
559 559  
560 - The LPS8V2 is not pre-installed InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
558 +[[image:image-20220725171719-1.png||height="570" width="769"]]
561 561  
562 562  
563 -=== **3. How to upgade the gateway node.js to the latest version.** ===
561 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
564 564  
565 - The user can upgrade nodejs, see [[Upgarde Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
566 566  
564 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
567 567  
568 -=== **4. How bath register device on the built-in Chirpstack network server** ===
566 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
569 569  
570 - The user can register devices in batch on the gateway Web UI, see
568 +[[image:image-20230321092456-1.png]]
571 571  
572 572  
573 -=== **5. Why my gateway is not Chirpstack?** ===
571 +== 4.2 Application Server ~-~- Node-Red ==
574 574  
575 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V2 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
576 576  
574 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
577 577  
578 -=== **6. How to disable the built-in server** ===
579 579  
577 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
578 +
579 +
580 +[[image:image-20220725172124-3.png||height="610" width="843"]]
581 +
582 +
583 +
584 +=== **Using Node-Red, InfluxDB and Grafana** ===
585 +
586 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
587 +
588 +
589 +the users can refer to this link to install them.
590 +
591 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
592 +
593 +
594 +=== **Upgrade the node.js** ===
595 +
596 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
597 +
598 +
599 +the users can refer to this link to upgrade them.
600 +
601 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
602 +
603 +
604 +== 4.3 How to disable the built-in server ==
605 +
606 +
607 +Use the following commands to start and stop the TTNv3 service:
608 +
580 580  (% class="box infomessage" %)
581 581  (((
582 -Use the following commands to start and stop the TTNv3 service:**     **
583 -
584 584  **# start**
585 585  systemctl start ttnstack
586 586  
... ... @@ -594,10 +594,10 @@
594 594  systemctl disable ttnstack
595 595  )))
596 596  
597 -(% class="box infomessage" %)
598 -(((
599 599  Use the following commands to start and stop the Node-Red service:
600 600  
626 +(% class="box infomessage" %)
627 +(((
601 601  **# start**
602 602  systemctl start nodered
603 603  
... ... @@ -612,37 +612,33 @@
612 612  )))
613 613  
614 614  
615 -=== **7. How choose the chirpstack server frequency SubBand** ===
642 +== 4.4 How to use ChirpStack on LPS8-V2 ==
616 616  
617 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
618 618  
619 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
645 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
620 620  
621 -[[image:image-20230602140406-3.png||height="480" width="918"]]
647 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
622 622  
623 623  
624 -When the configuration is complete, click** "Save&Apply"**.
650 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
625 625  
626 626  
627 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
653 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
628 628  
629 -[[image:image-20230602143122-4.png||height="511" width="983"]]
655 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
630 630  
657 +[[image:image-20230602140406-3.png||height="480" width="918"]]
631 631  
632 -= 5. Watch Dog =
633 633  
660 +When the configuration is complete, click** "Save&Apply"**.
634 634  
635 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
636 636  
637 -The uses can be via the below method to enable Watch Dog:
663 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
638 638  
665 +[[image:image-20230602143122-4.png||height="511" width="983"]]
639 639  
640 -(% class="box infomessage" %)
641 -(((
642 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
643 -)))
644 644  
645 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
668 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
646 646  
647 647  
648 648  
... ... @@ -651,6 +651,7 @@
651 651  
652 652  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
653 653  
677 +
654 654  Port 1 of the UART on the LPS8-V2 is GND
655 655  
656 656  (% class="box infomessage" %)
... ... @@ -662,8 +662,10 @@
662 662  **GND <~-~--> GND (Black line)**
663 663  )))
664 664  
689 +
665 665  **LPS8v2 UART connection photo**
666 666  
692 +
667 667  [[image:image-20230421094319-2.png||height="351" width="392"]]
668 668  
669 669  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -675,183 +675,161 @@
675 675  [[image:image-20220804164747-2.png||height="622" width="594"]]
676 676  
677 677  
678 -= 7. OTA System Update =
704 += 7. Use the helium gateway-rs as the Data-only Hotspot =
679 679  
680 680  
681 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
707 +== **Step 1: Configure Frequency Band** ==
682 682  
683 683  
684 -== 7.1 Auto-update method ==
710 +//Each country has a requirement for frequency region. Choose the right one for your area.//
685 685  
712 +[[image:image-20220905164308-1.png]]
686 686  
687 -The default, each gateway will enable the auto-update function.
688 688  
689 -this function will be triggered every boot and every midnight.
690 690  
716 +== **Step 2: Configure the forward address** ==
691 691  
692 -Users can enable/disable it via Web Page
693 693  
694 -[[image:image-20230607094447-2.png]]
719 +**Select one of the servers to configure.**
695 695  
721 +**For example:**
696 696  
697 -== 7.2 Manual upgrade method ==
723 +[[image:image-20220905164847-2.png]]
698 698  
699 699  
700 -1). Using the Linux command to upgrade the system
701 701  
727 +== **Step 3: Download and Install the Helium-gateway-rs** ==
702 702  
703 -(% class="box infomessage" %)
704 -(((
705 -**apt update && apt install *dragino***
706 -)))
707 707  
730 +**Access the gateway CLI via SSH.**
708 708  
709 -2). Upgrade the system via the Web page button of "Manual Update"
732 +[[image:image-20230425153417-2.png]]
710 710  
711 711  
712 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
735 +**Install the new gateway-rs**
713 713  
714 -[[image:image-20230607093849-1.png]]
737 +(% class="box infomessage" %)
738 +(((
739 +**apt update && apt install helium-gateway**
740 +)))
715 715  
742 +[[image:image-20230425154058-4.png]]
716 716  
717 717  
718 -= 8. FAQ =
719 719  
720 -== 8.1 How to change Hostname ==
746 +Option: If you installed the older gateway-rs, you have clean it
721 721  
722 -
723 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
724 -
725 725  (% class="box infomessage" %)
726 726  (((
727 -hostnamectl set-hostname dragino-123456
750 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
728 728  )))
729 729  
730 -[[image:image-20230517102429-1.png]]
753 +[[image:image-20230425153823-3.png]]
731 731  
732 -After the configuration is complete, run "reboot" to restart the gateway.
733 733  
756 +**Change the region setting:**
734 734  
735 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
736 736  
759 +(% class="box infomessage" %)
760 +(((
761 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
737 737  
738 -Migrate guide:
739 739  
740 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
764 +**e.g: **
741 741  
742 -**2. On the Server ~-~-> Network Server interface, click "Management"**
766 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
743 743  
744 -[[image:image-20230616162454-1.png]]
768 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
769 +)))
745 745  
746 746  
747 -**3. Click "Migrate-Chirpstack"**
772 +**Restart the gateway-rs**
748 748  
749 -[[image:image-20230616162742-2.png]]
774 +(% class="box infomessage" %)
775 +(((
776 +**systemctl restart helium_gateway**
777 +)))
750 750  
779 +[[image:image-20230425155612-7.png||height="265" width="911"]]
751 751  
752 -**4. Strat Install **
753 753  
754 -Click start Install and wait until the migration succeeds
755 755  
756 -[[image:image-20230616162934-3.png]]
783 +**Check the helium_gateway running status**
757 757  
758 758  
759 -**5.Migration complete check result**
786 +(% class="box infomessage" %)
787 +(((
788 +**systemctl status helium_gateway**
789 +)))
760 760  
761 -[[image:image-20230616174526-4.png||height="706" width="983"]]
762 762  
792 +[[image:image-20230425154740-5.png]]
763 763  
764 -[[image:image-20230616180004-9.png]]
765 765  
766 766  
767 -== 8.3 How to reduce the 4g data consumed ==
796 +**Check the helium_gateway Log：**
768 768  
798 +(% class="box infomessage" %)
799 +(((
800 +**journalctl -u helium_gateway -f**
801 +)))
769 769  
770 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
771 771  
772 -[[image:image-20230719100239-1.png||height="724" width="994"]]
804 +[[image:image-20230425155659-8.png]]
773 773  
774 774  
775 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
807 += 8. OTA System Update =
776 776  
777 -[[image:image-20230719100332-2.png]]
778 778  
810 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
779 779  
780 -3. Disable the auto-update:
781 781  
782 -[[image:image-20230719100419-3.png||height="458" width="995"]]
813 += 9. FAQ =
783 783  
815 +== 9.1 How to change Hostname ==
784 784  
785 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
786 786  
818 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
787 787  
788 788  (% class="box infomessage" %)
789 789  (((
790 -apt update && apt install helium-gateway
822 +hostnamectl set-hostname dragino-123456
791 791  )))
792 792  
825 +[[image:image-20230517102429-1.png]]
793 793  
794 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
827 +After the configuration is complete, run "reboot" to restart the gateway.
795 795  
796 796  
797 -By default, the LPS8v2's built-in server is ChirpStack v4,
830 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
798 798  
799 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
800 800  
801 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
833 +Migrate guide:
802 802  
835 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
803 803  
804 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
837 +2. Download migrate script and run it.
805 805  
806 -
807 -== 8.6 How do I view gateway logs ==
808 -
809 -=== 8.6.1 LoRaWAN Log: ===
810 -
811 -==== Semtech UDP Log : ====
812 -
813 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
814 -
815 -[[image:image-20231017112115-2.png||height="611" width="821"]]
816 -
817 -
818 -==== Station Log: ====
819 -
820 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
821 -
822 -[[image:image-20231017111606-1.png||height="622" width="821"]]
823 -
824 -
825 -=== 8.6.2  4G Log ===
826 -
827 -The user needs to access the Linux console of the gateway and enter the following command:
828 -
829 829  (% class="box infomessage" %)
830 830  (((
831 -cat /var/log/qmilog.txt
841 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
832 832  )))
833 833  
834 -[[image:image-20231017114417-3.png||height="543" width="679"]]
844 +[[image:image-20230602135658-1.png||height="545" width="986"]]
835 835  
836 -=== 8.6.3 Dmesg Log ===
837 837  
838 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
847 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
839 839  
840 -[[image:image-20231017115330-5.png||height="565" width="740"]]
849 +[[image:image-20230602135825-2.png||height="356" width="855"]]
841 841  
851 +The default account for chirpstack is: **admin/admin**
842 842  
843 -=== 8.6.4 Record Log ===
844 844  
845 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
854 += 10. Trouble Shooting =
846 846  
847 -[[image:image-20231017115124-4.png||height="215" width="880"]]
856 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
848 848  
849 849  
850 -= 9. Trouble Shooting =
851 -
852 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
853 -
854 -
855 855  [[image:image-20220920135918-1.png]]
856 856  
857 857  
... ... @@ -867,7 +867,7 @@
867 867  [[image:image-20220920141936-2.png]]
868 868  
869 869  
870 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
874 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
871 871  
872 872  
873 873  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -875,7 +875,7 @@
875 875  [[image:image-20230508171607-1.png]]
876 876  
877 877  
878 -== 9.3  Fallback IP does not work, how can users check ==
882 +== 10.3  Fallback IP does not work, how can users check ==
879 879  
880 880  
881 881  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
... ... @@ -897,7 +897,7 @@
897 897  If the firewall is not down, this will affect access to the gateway.
898 898  
899 899  
900 -== 9.4  Click "Manual_Update", why there is no response? ==
904 +== 10.4  Click "Manual_Update", why there is no response? ==
901 901  
902 902  
903 903  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -906,40 +906,10 @@
906 906  [[image:image-20230527090555-3.png||height="660" width="832"]]
907 907  
908 908  
909 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
913 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
910 910  
911 911  
912 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
913 -
914 -
915 -(% class="box infomessage" %)
916 916  (((
917 -apt update && apt install *dragino*
918 -
919 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
920 -)))
921 -
922 -
923 -== 9.6  How to reset the built-in server ==
924 -
925 -
926 -**1) Build-in The Things Network**
927 -
928 -Refer to this link to delete the Built-in server's device.
929 -
930 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
931 -
932 -
933 -**2) Build-in Chirpstack**
934 -
935 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
936 -
937 -[[image:image-20231106180846-5.png||height="310" width="668"]]
938 -
939 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
940 -
941 -
942 -(((
943 943  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
944 944  )))
945 945  
... ... @@ -947,16 +947,17 @@
947 947  With your question as detailed as possible. We will reply and help you in the shortest.
948 948  
949 949  
950 -= 11. Reference =
924 += 12. Reference =
951 951  
952 952  
953 953  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
954 954  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
955 955  
930 +
956 956  
957 957  )))
958 958  
959 -= 12. Order Info =
934 += 13. Order Info =
960 960  
961 961  
962 962  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -964,31 +964,23 @@
964 964  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
965 965  
966 966  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
967 -
968 968  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
969 -
970 970  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
971 -
972 972  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
973 -
974 974  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
975 -
976 976  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
977 977  
978 978  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
979 979  
980 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
950 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
951 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
952 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
953 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
981 981  
982 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
983 -
984 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
985 -
986 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
987 -
988 988  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
989 989  
990 990  
991 -= 13. Manufacturer Info =
958 += 14. Manufacturer Info =
992 992  
993 993  
994 994  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -998,7 +998,7 @@
998 998  LongCheng Street, LongGang District ; Shenzhen 518116,China
999 999  
1000 1000  
1001 -= 14. FCC Warning =
968 += 15. FCC Warning =
1002 1002  
1003 1003  
1004 1004  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0