Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 280.1 >
edited by Xiaoye
on 2023/12/01 18:03
To version < 205.1 >
edited by Kilight Cao
on 2023/05/27 09:09
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -81,31 +81,35 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
87 +== 1.4 Block Diagram ==
88 88  
89 89  
90 +
91 +== 1.5 LED Indicators ==
92 +
93 +
90 90  LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
97 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
99 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
101 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
107 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
109 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
106 106  
107 107  
108 -== 1.5 Button Intruction ==
112 +== 1.6 Button Intruction ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -113,19 +113,14 @@
113 113  
114 114  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
120 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
123 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
125 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 129  = 2. Quick Start =
130 130  
131 131  
... ... @@ -134,9 +134,9 @@
134 134  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
135 135  
136 136  
137 -== 2.1 Access and Configure LPS8-V2 ==
136 +== 2.1 Connects to the network and accesses the gateway Web UI ==
138 138  
139 -=== 2.1.1 Find IP address of LPS8-V2 ===
138 +=== 2.1.1 connect the network ===
140 140  
141 141  
142 142  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -144,7 +144,7 @@
144 144  
145 145  Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
146 146  
147 -(% style="background-color:yellow" %)**dragino+dragino**
146 + (% style="background-color:yellow" %)**dragino+dragino**
148 148  
149 149  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
150 150  
... ... @@ -153,7 +153,9 @@
153 153  [[image:image-20230527085250-2.png||height="495" width="284"]]
154 154  
155 155  
155 +If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
156 156  
157 +
157 157  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
158 158  
159 159  
... ... @@ -182,7 +182,7 @@
182 182  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
183 183  
184 184  
185 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
186 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
186 186  
187 187  
188 188  As in the below photo:
... ... @@ -192,7 +192,7 @@
192 192  
193 193  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
194 194  
195 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
196 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
196 196  
197 197  
198 198  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -236,9 +236,9 @@
236 236  
237 237  The account details for Web Login are:
238 238  
239 -(% style="color:blue" %)**User Name: root**
240 +(% style="color:#4f81bd" %)**User Name: root**
240 240  
241 -(% style="color:blue" %)**Password:   dragino**
242 +(% style="color:#4f81bd" %)**Password:   dragino**
242 242  
243 243  [[image:image-20230106153501-1.png||height="367" width="894"]]
244 244  
... ... @@ -251,9 +251,7 @@
251 251  LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
252 252  
253 253  * **WAN Port Internet Mode**
254 -
255 255  * **WiFi Client Mode**
256 -
257 257  * **Cellular Mode**
258 258  
259 259  === 2.2.2  Use WAN port to access Internet ===
... ... @@ -305,7 +305,6 @@
305 305  
306 306  === 2.2.5  Check Internet connection ===
307 307  
308 -
309 309  In the **home** page, we can check the Internet connection.
310 310  
311 311  * GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
... ... @@ -374,7 +374,7 @@
374 374  == 3.1 Home ==
375 375  
376 376  
377 -Shows the system running status:
375 +//Shows the system running status~://
378 378  
379 379  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
380 380  
... ... @@ -384,15 +384,15 @@
384 384  === 3.2.1 LoRa ~-~-> LoRa ===
385 385  
386 386  
387 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
385 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
388 388  
389 -Different LPS8v2 hardware versions can support different frequency ranges:
387 +//Different LPS8v2 hardware versions can support different frequency ranges~://
390 390  
391 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
392 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
389 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
390 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
393 393  
394 394  (% class="wikigeneratedid" %)
395 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
393 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
396 396  
397 397  
398 398  (% class="wikigeneratedid" %)
... ... @@ -409,7 +409,7 @@
409 409  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
410 410  
411 411  
412 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
410 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
413 413  
414 414  
415 415  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -418,7 +418,7 @@
418 418  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
419 419  
420 420  
421 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
419 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
422 422  
423 423  
424 424  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -433,9 +433,8 @@
433 433  
434 434  === 3.4.1 Network ~-~-> WiFi ===
435 435  
436 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
437 437  
438 -[[image:image-20230619095946-1.png||height="332" width="827"]]
435 +[[image:image-20220616114756-4.png||height="251" width="669"]]
439 439  
440 440  
441 441  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -447,7 +447,7 @@
447 447  === 3.4.3 Network ~-~-> Network ===
448 448  
449 449  
450 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
447 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
451 451  
452 452  [[image:image-20230214093657-2.png||height="333" width="858"]]
453 453  
... ... @@ -455,7 +455,7 @@
455 455  === 3.4.4 Network ~-~-> Cellular ===
456 456  
457 457  
458 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
455 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
459 459  
460 460  (% style="color:red" %)**Note: APN cannot be empty.**
461 461  
... ... @@ -462,16 +462,11 @@
462 462  [[image:image-20230228115126-1.png]]
463 463  
464 464  
465 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
462 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
466 466  
467 467  [[image:image-20230228115535-2.png||height="478" width="888"]]
468 468  
469 469  
470 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
471 -
472 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
473 -
474 -
475 475  == 3.5 System ==
476 476  
477 477  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -479,13 +479,13 @@
479 479  
480 480  Shows the system info:
481 481  
482 -[[image:image-20231031162854-1.png]]
474 +[[image:image-20220917144512-5.png||height="618" width="853"]]
483 483  
484 484  
485 485  === 3.5.2 System ~-~-> System General ===
486 486  
487 487  
488 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
480 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
489 489  
490 490  In addition, Users can customize the FallBack IP address.
491 491  
... ... @@ -495,13 +495,13 @@
495 495  === 3.5.3 System ~-~-> Backup/Restore ===
496 496  
497 497  
498 -[[image:image-20231031162927-2.png]]
490 +[[image:image-20220917144725-6.png||height="208" width="869"]]
499 499  
500 500  
501 501  === 3.5.4 System ~-~-> Remoteit ===
502 502  
503 503  
504 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
496 +In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
505 505  
506 506  
507 507  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -512,7 +512,7 @@
512 512  === 3.5.5 System ~-~-> Package Management ===
513 513  
514 514  
515 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
507 +In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
516 516  
517 517  [[image:image-20230214094316-4.png]]
518 518  
... ... @@ -519,65 +519,96 @@
519 519  
520 520  = 4. Build-in Server =
521 521  
522 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
523 523  
515 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
524 524  
525 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
526 526  
527 -[[image:image-20231106180816-4.png||height="416" width="896"]]
518 +[[image:image-20230214095318-5.png||height="347" width="980"]]
528 528  
529 -[[image:image-20231201165904-1.png||height="466" width="899"]]
530 530  
531 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
521 +(% style="color:red" %)**Note:**
532 532  
533 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
523 + **Path**: System ~-~-> Built-in Server
534 534  
535 535  
526 +**Troubleshooting:**
536 536  
537 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
538 538  
529 +**~ 1. URL does not jump properly**
539 539  
540 -[[image:image-20230616175558-7.png||height="362" width="894"]]
531 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
541 541  
542 -[[image:image-20231201170355-2.png||height="536" width="899"]]
533 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
543 543  
544 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
545 545  
536 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
546 546  
547 547  
548 -== **2). Troubleshooting:** ==
539 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
549 549  
541 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
550 550  
551 -**~1. If the URL does not jump properly.**
552 552  
553 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
544 +Login account:
554 554  
555 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
546 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
556 556  
557 -**2. How to install InfluxDB, Garfana.**
548 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
558 558  
559 - The LPS8V2 is not pre-installed InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
560 560  
561 -**3. How to upgade the gateway node.js to the latest version.**
551 +[[image:image-20220725171719-1.png||height="570" width="769"]]
562 562  
563 - The user can upgrade nodejs, see [[Upgarde Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
564 564  
565 -**4. How bath register device on the built-in Chirpstack network server**
554 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
566 566  
567 - The user can register devices in batch on the gateway Web UI, see
568 568  
569 -(% class="wikigeneratedid" id="H4.4A0WhymygatewayisnotChirpstack3F" %)
570 -**5. Why my gateway is not Chirpstack?**
557 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
571 571  
572 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V2 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
559 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
573 573  
574 -(% class="wikigeneratedid" id="H4.3A0Howtodisablethebuilt-inserver" %)
575 -**6. How to disable the built-in server**
561 +[[image:image-20230321092456-1.png]]
576 576  
563 +
564 +== 4.2 Application Server ~-~- Node-Red ==
565 +
566 +
567 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
568 +
569 +
570 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
571 +
572 +
573 +[[image:image-20220725172124-3.png||height="610" width="843"]]
574 +
575 +
576 +
577 +=== **Using Node-Red, InfluxDB and Grafana** ===
578 +
579 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
580 +
581 +
582 +the users can refer to this link to install them.
583 +
584 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
585 +
586 +
587 +=== **Upgrade the node.js** ===
588 +
589 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
590 +
591 +
592 +the users can refer to this link to upgrade them.
593 +
594 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
595 +
596 +
597 +== 4.3 How to disable the built-in server ==
598 +
599 +
600 +Use the following commands to start and stop the TTNv3 service:
601 +
577 577  (% class="box infomessage" %)
578 578  (((
579 -Use the following commands to start and stop the TTNv3 service:**     **
580 -
581 581  **# start**
582 582  systemctl start ttnstack
583 583  
... ... @@ -591,10 +591,10 @@
591 591  systemctl disable ttnstack
592 592  )))
593 593  
594 -(% class="box infomessage" %)
595 -(((
596 596  Use the following commands to start and stop the Node-Red service:
597 597  
619 +(% class="box infomessage" %)
620 +(((
598 598  **# start**
599 599  systemctl start nodered
600 600  
... ... @@ -609,47 +609,26 @@
609 609  )))
610 610  
611 611  
635 +== 4.4 How to use ChirpStack on LPS8-V2 ==
612 612  
613 -=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
614 614  
638 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
615 615  
616 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
640 +[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
617 617  
618 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
642 +[[image:image-20230222094908-1.png||height="133" width="798"]]
619 619  
620 -[[image:image-20230602140406-3.png||height="480" width="918"]]
621 621  
645 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
622 622  
623 -When the configuration is complete, click** "Save&Apply"**.
624 624  
625 625  
626 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
627 -
628 -[[image:image-20230602143122-4.png||height="511" width="983"]]
629 -
630 -
631 -= 5. Watch Dog =
632 -
633 -
634 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
635 -
636 -The uses can be via the below method to enable Watch Dog:
637 -
638 -
639 -(% class="box infomessage" %)
640 -(((
641 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
642 -)))
643 -
644 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
645 -
646 -
647 -
648 648  = 6. How users can access LPS8-V2 using serial USB =
649 649  
650 650  
651 651  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
652 652  
654 +
653 653  Port 1 of the UART on the LPS8-V2 is GND
654 654  
655 655  (% class="box infomessage" %)
... ... @@ -661,8 +661,10 @@
661 661  **GND <~-~--> GND (Black line)**
662 662  )))
663 663  
666 +
664 664  **LPS8v2 UART connection photo**
665 665  
669 +
666 666  [[image:image-20230421094319-2.png||height="351" width="392"]]
667 667  
668 668  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -674,183 +674,138 @@
674 674  [[image:image-20220804164747-2.png||height="622" width="594"]]
675 675  
676 676  
677 -= 7. OTA System Update =
681 += 7. Use the helium gateway-rs as the Data-only Hotspot =
678 678  
679 679  
680 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
684 +== **Step 1: Configure Frequency Band** ==
681 681  
682 682  
683 -== 7.1 Auto-update method ==
687 +//Each country has a requirement for frequency region. Choose the right one for your area.//
684 684  
689 +[[image:image-20220905164308-1.png]]
685 685  
686 -The default, each gateway will enable the auto-update function.
687 687  
688 -this function will be triggered every boot and every midnight.
689 689  
693 +== **Step 2: Configure the forward address** ==
690 690  
691 -Users can enable/disable it via Web Page
692 692  
693 -[[image:image-20230607094447-2.png]]
696 +**Select one of the servers to configure.**
694 694  
698 +**For example:**
695 695  
696 -== 7.2 Manual upgrade method ==
700 +[[image:image-20220905164847-2.png]]
697 697  
698 698  
699 -1). Using the Linux command to upgrade the system
700 700  
704 +== **Step 3: Download and Install the Helium-gateway-rs** ==
701 701  
702 -(% class="box infomessage" %)
703 -(((
704 -**apt update && apt install *dragino***
705 -)))
706 706  
707 +**Access the gateway CLI via SSH.**
707 707  
708 -2). Upgrade the system via the Web page button of "Manual Update"
709 +[[image:image-20230425153417-2.png]]
709 709  
710 710  
711 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
712 +**Install the new gateway-rs**
712 712  
713 -[[image:image-20230607093849-1.png]]
714 +(% class="box infomessage" %)
715 +(((
716 +**apt update && apt install helium-gateway**
717 +)))
714 714  
719 +[[image:image-20230425154058-4.png]]
715 715  
716 716  
717 -= 8. FAQ =
718 718  
719 -== 8.1 How to change Hostname ==
723 +Option: If you installed the older gateway-rs, you have clean it
720 720  
721 -
722 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
723 -
724 724  (% class="box infomessage" %)
725 725  (((
726 -hostnamectl set-hostname dragino-123456
727 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
727 727  )))
728 728  
729 -[[image:image-20230517102429-1.png]]
730 +[[image:image-20230425153823-3.png]]
730 730  
731 -After the configuration is complete, run "reboot" to restart the gateway.
732 732  
733 +**Change the region setting:**
733 733  
734 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
735 735  
736 +(% class="box infomessage" %)
737 +(((
738 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
736 736  
737 -Migrate guide:
738 738  
739 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
741 +**e.g: **
740 740  
741 -**2. On the Server ~-~-> Network Server interface, click "Management"**
743 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
742 742  
743 -[[image:image-20230616162454-1.png]]
745 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
746 +)))
744 744  
745 745  
746 -**3. Click "Migrate-Chirpstack"**
749 +**Restart the gateway-rs**
747 747  
748 -[[image:image-20230616162742-2.png]]
751 +(% class="box infomessage" %)
752 +(((
753 +**systemctl restart helium_gateway**
754 +)))
749 749  
756 +[[image:image-20230425155612-7.png||height="265" width="911"]]
750 750  
751 -**4. Strat Install **
752 752  
753 -Click start Install and wait until the migration succeeds
754 754  
755 -[[image:image-20230616162934-3.png]]
760 +**Check the helium_gateway running status**
756 756  
757 757  
758 -**5.Migration complete check result**
763 +(% class="box infomessage" %)
764 +(((
765 +**systemctl status helium_gateway**
766 +)))
759 759  
760 -[[image:image-20230616174526-4.png||height="706" width="983"]]
761 761  
769 +[[image:image-20230425154740-5.png]]
762 762  
763 -[[image:image-20230616180004-9.png]]
764 764  
765 765  
766 -== 8.3 How to reduce the 4g data consumed ==
773 +**Check the helium_gateway Log：**
767 767  
768 -
769 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
770 -
771 -[[image:image-20230719100239-1.png||height="724" width="994"]]
772 -
773 -
774 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
775 -
776 -[[image:image-20230719100332-2.png]]
777 -
778 -
779 -3. Disable the auto-update:
780 -
781 -[[image:image-20230719100419-3.png||height="458" width="995"]]
782 -
783 -
784 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
785 -
786 -
787 787  (% class="box infomessage" %)
788 788  (((
789 -apt update && apt install helium-gateway
777 +**journalctl -u helium_gateway -f**
790 790  )))
791 791  
792 792  
793 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
781 +[[image:image-20230425155659-8.png]]
794 794  
795 795  
796 -By default, the LPS8v2's built-in server is ChirpStack v4,
784 += 8. OTA System Update =
797 797  
798 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
799 799  
800 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
787 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
801 801  
802 802  
803 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
804 804  
791 += 9. FAQ =
805 805  
806 -== 8.6 How do I view gateway logs ==
793 +== 9.1 How to change Hostname ==
807 807  
808 -=== 8.6.1 LoRaWAN Log: ===
809 809  
810 -==== Semtech UDP Log : ====
796 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
811 811  
812 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
813 -
814 -[[image:image-20231017112115-2.png||height="611" width="821"]]
815 -
816 -
817 -==== Station Log: ====
818 -
819 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
820 -
821 -[[image:image-20231017111606-1.png||height="622" width="821"]]
822 -
823 -
824 -=== 8.6.2  4G Log ===
825 -
826 -The user needs to access the Linux console of the gateway and enter the following command:
827 -
828 828  (% class="box infomessage" %)
829 829  (((
830 -cat /var/log/qmilog.txt
800 +hostnamectl set-hostname dragino-123456
831 831  )))
832 832  
833 -[[image:image-20231017114417-3.png||height="543" width="679"]]
803 +[[image:image-20230517102429-1.png]]
834 834  
835 -=== 8.6.3 Dmesg Log ===
805 +After the configuration is complete, run "reboot" to restart the gateway.
836 836  
837 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
838 838  
839 -[[image:image-20231017115330-5.png||height="565" width="740"]]
808 += 10. Trouble Shooting =
840 840  
810 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
841 841  
842 -=== 8.6.4 Record Log ===
843 843  
844 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
845 -
846 -[[image:image-20231017115124-4.png||height="215" width="880"]]
847 -
848 -
849 -= 9. Trouble Shooting =
850 -
851 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
852 -
853 -
854 854  [[image:image-20220920135918-1.png]]
855 855  
856 856  
... ... @@ -866,15 +866,14 @@
866 866  [[image:image-20220920141936-2.png]]
867 867  
868 868  
869 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
828 +== 10.2 The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
870 870  
871 -
872 872  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
873 873  
874 874  [[image:image-20230508171607-1.png]]
875 875  
876 876  
877 -== 9.3  Fallback IP does not work, how can users check ==
835 +== 10.3  Fallback IP does not work, how can users check ==
878 878  
879 879  
880 880  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
... ... @@ -896,7 +896,7 @@
896 896  If the firewall is not down, this will affect access to the gateway.
897 897  
898 898  
899 -== 9.4  Click "Manual_Update", why there is no response? ==
857 +== 10.4  Click "Manual_Update", why there is no response? ==
900 900  
901 901  
902 902  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -904,51 +904,20 @@
904 904  
905 905  [[image:image-20230527090555-3.png||height="660" width="832"]]
906 906  
865 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
907 907  
908 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
909 909  
910 -
911 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
912 -
913 -
914 -(% class="box infomessage" %)
915 915  (((
916 -apt update && apt install *dragino*
917 -
918 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
869 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
919 919  )))
920 920  
921 -
922 -== 9.6  How to reset the built-in server ==
923 -
924 -
925 -**1) Build-in The Things Network**
926 -
927 -Refer to this link to delete the Built-in server's device.
928 -
929 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
930 -
931 -
932 -**2) Build-in Chirpstack**
933 -
934 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
935 -
936 -[[image:image-20231106180846-5.png||height="310" width="668"]]
937 -
938 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
939 -
940 -
941 941  (((
942 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
943 -)))
873 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
944 944  
945 -(((
946 -With your question as detailed as possible. We will reply and help you in the shortest.
947 947  
876 += 12. Reference =
948 948  
949 -= 11. Reference =
950 950  
951 -
952 952  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
953 953  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
954 954  
... ... @@ -955,7 +955,7 @@
955 955  
956 956  )))
957 957  
958 -= 12. Order Info =
885 += 13. Order Info =
959 959  
960 960  
961 961  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -963,31 +963,23 @@
963 963  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
964 964  
965 965  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
966 -
967 967  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
968 -
969 969  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
970 -
971 971  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
972 -
973 973  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
974 -
975 975  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
976 976  
977 977  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
978 978  
979 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
901 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
902 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
903 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
904 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
980 980  
981 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
982 -
983 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
984 -
985 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
986 -
987 987  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
988 988  
989 989  
990 -= 13. Manufacturer Info =
909 += 14. Manufacturer Info =
991 991  
992 992  
993 993  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -997,7 +997,7 @@
997 997  LongCheng Street, LongGang District ; Shenzhen 518116,China
998 998  
999 999  
1000 -= 14. FCC Warning =
919 += 15. FCC Warning =
1001 1001  
1002 1002  
1003 1003  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0