Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 279.1 >
edited by Xiaoye
on 2023/12/01 18:01
To version < 120.1 >
edited by Kilight Cao
on 2022/12/30 09:23
>
Change comment: Uploaded new attachment "image-20221230092331-3.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,15 +57,15 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
63 +* Work Temperature: -20 ~~ 65°C
64 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
67 +
68 +
69 69  == 1.3 Features ==
70 70  
71 71  
... ... @@ -81,51 +81,52 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
88 88  
89 89  
90 -LPS8-V2 has totally four LEDs, They are:
89 +== 1.4 Block Diagram ==
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
93 +== 1.5 LED Indicators ==
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
96 +LPS8-V2 has totally four LEDs, They are:
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
99 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
101 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
106 106  
103 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
107 107  
108 -== 1.5 Button Intruction ==
105 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
109 109  
107 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
110 110  
111 -LPS8-V2 has a black toggle button, which is:
109 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
111 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
113 113  
114 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
114 +== 1.6 Button Intruction ==
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
117 +LPS8-V2 has a black toggle button, which is:
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
120 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
122 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
125 125  
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 127  
125 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
128 128  
127 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
128 +
129 +
129 129  = 2. Quick Start =
130 130  
131 131  
... ... @@ -134,31 +134,16 @@
134 134  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
135 135  
136 136  
137 -== 2.1 Access and Configure LPS8-V2 ==
138 +== 2.1 Connects to the network and accesses the gateway Web UI ==
138 138  
139 -=== 2.1.1 Find IP address of LPS8-V2 ===
140 +== 2.1.1 connect the network ==
140 140  
141 141  
142 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
143 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
143 143  
144 144  
145 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
146 -
147 -(% style="background-color:yellow" %)**dragino+dragino**
148 -
149 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
150 -
151 -[[image:image-20230527084515-1.png]]
152 -
153 -[[image:image-20230527085250-2.png||height="495" width="284"]]
154 -
155 -
156 -
157 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
158 -
159 -
160 160  (((
161 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
147 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
162 162  )))
163 163  
164 164  (((
... ... @@ -169,40 +169,9 @@
169 169  
170 170  
171 171  
172 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
158 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
173 173  
174 174  
175 -[[image:image-20230107084650-2.png||height="310" width="839"]]
176 -
177 -
178 -(% style="color:blue" %)**Steps to connect via fallback IP:**
179 -
180 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
181 -
182 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
183 -
184 -
185 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
186 -
187 -
188 -As in the below photo:
189 -
190 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
191 -
192 -
193 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
194 -
195 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
196 -
197 -
198 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
199 -
200 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
201 -
202 -
203 -
204 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
205 -
206 206  [[image:image-20220622100542-2.png||height="369" width="1256"]]
207 207  
208 208  
... ... @@ -222,104 +222,11 @@
222 222  [[image:image-20220622102901-8.png||height="476" width="938"]]
223 223  
224 224  
225 -=== 2.1.2 Access Configure Web UI ===
180 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
226 226  
182 +=== 2.2.1 Select your area frequency ===
227 227  
228 -**Web Interface**
229 229  
230 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
231 -
232 -
233 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
234 -
235 -You will see the login interface of LPS8-V2 as shown below.
236 -
237 -The account details for Web Login are:
238 -
239 -(% style="color:blue" %)**User Name: root**
240 -
241 -(% style="color:blue" %)**Password:   dragino**
242 -
243 -[[image:image-20230106153501-1.png||height="367" width="894"]]
244 -
245 -
246 -== 2.2  Typical Network Setup ==
247 -
248 -=== 2.2.1  Overview ===
249 -
250 -
251 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
252 -
253 -* **WAN Port Internet Mode**
254 -
255 -* **WiFi Client Mode**
256 -
257 -* **Cellular Mode**
258 -
259 -=== 2.2.2  Use WAN port to access Internet ===
260 -
261 -
262 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
263 -
264 -
265 -[[image:image-20230411100633-2.png||height="501" width="935"]]
266 -
267 -
268 -=== 2.2.3  Access the Internet as a WiFi Client ===
269 -
270 -
271 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
272 -
273 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
274 -
275 -[[image:image-20230411095739-1.png||height="264" width="691"]]
276 -
277 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
278 -
279 -
280 -=== 2.2.4  Use built-in 4G modem for internet access ===
281 -
282 -
283 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
284 -
285 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
286 -
287 -
288 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
289 -
290 -First, install the Micro SIM card as below direction
291 -
292 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
293 -
294 -
295 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
296 -
297 -
298 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
299 -
300 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
301 -
302 -
303 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
304 -
305 -
306 -=== 2.2.5  Check Internet connection ===
307 -
308 -
309 -In the **home** page, we can check the Internet connection.
310 -
311 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
312 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
313 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
314 -
315 -[[image:image-20230411101534-3.png||height="544" width="942"]]
316 -
317 -
318 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
319 -
320 -=== 2.3.1 Select your area frequency ===
321 -
322 -
323 323  (((
324 324  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
325 325  
... ... @@ -329,7 +329,7 @@
329 329  [[image:image-20220622103332-9.png||height="485" width="938"]]
330 330  
331 331  
332 -=== 2.3.2 Get the only gateway EUI ===
194 +=== 2.2.2 Get the only gateway EUI ===
333 333  
334 334  
335 335  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -353,7 +353,7 @@
353 353  [[image:image-20220622103956-12.png]]
354 354  
355 355  
356 -=== 2.3.3 Register the gateway to The Things Network ===
218 +== 2.2.3 Register the gateway to The Things Network ==
357 357  
358 358  
359 359  **Login to The Things Network**
... ... @@ -374,7 +374,7 @@
374 374  == 3.1 Home ==
375 375  
376 376  
377 -Shows the system running status:
239 +//Shows the system running status~://
378 378  
379 379  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
380 380  
... ... @@ -384,15 +384,15 @@
384 384  === 3.2.1 LoRa ~-~-> LoRa ===
385 385  
386 386  
387 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
249 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
388 388  
389 -Different LPS8v2 hardware versions can support different frequency ranges:
251 +//Different LPS8v2 hardware versions can support different frequency ranges~://
390 390  
391 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
392 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
253 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
254 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
393 393  
394 394  (% class="wikigeneratedid" %)
395 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
257 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
396 396  
397 397  
398 398  (% class="wikigeneratedid" %)
... ... @@ -409,7 +409,7 @@
409 409  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
410 410  
411 411  
412 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
274 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
413 413  
414 414  
415 415  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -418,7 +418,7 @@
418 418  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
419 419  
420 420  
421 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
283 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
422 422  
423 423  
424 424  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -433,9 +433,8 @@
433 433  
434 434  === 3.4.1 Network ~-~-> WiFi ===
435 435  
436 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
437 437  
438 -[[image:image-20230619095946-1.png||height="332" width="827"]]
299 +[[image:image-20220616114756-4.png||height="251" width="669"]]
439 439  
440 440  
441 441  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -444,415 +444,234 @@
444 444  [[image:image-20220820134112-2.png||height="539" width="668"]]
445 445  
446 446  
447 -=== 3.4.3 Network ~-~-> Network ===
308 +=== 3.4.3 Network ~-~-> Firewall ===
448 448  
449 449  
450 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
311 +[[image:image-20220616115351-6.png||height="244" width="661"]]
451 451  
452 -[[image:image-20230214093657-2.png||height="333" width="858"]]
453 453  
454 -
455 -=== 3.4.4 Network ~-~-> Cellular ===
456 -
457 -
458 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
459 -
460 -(% style="color:red" %)**Note: APN cannot be empty.**
461 -
462 -[[image:image-20230228115126-1.png]]
463 -
464 -
465 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
466 -
467 -[[image:image-20230228115535-2.png||height="478" width="888"]]
468 -
469 -
470 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
471 -
472 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
473 -
474 -
475 475  == 3.5 System ==
476 476  
477 -=== 3.5.1 System ~-~-> System Overview ===
316 +=== 3.5.1  System ~-~-> System Overview ===
478 478  
479 479  
480 480  Shows the system info:
481 481  
482 -[[image:image-20231031162854-1.png]]
321 +[[image:image-20220917144512-5.png||height="618" width="853"]]
483 483  
484 484  
485 -=== 3.5.2 System ~-~-> System General ===
324 +=== 3.5.2 System ~-~-> Backup/Restore ===
486 486  
487 487  
488 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
327 +[[image:image-20220917144725-6.png||height="208" width="869"]]
489 489  
490 -In addition, Users can customize the FallBack IP address.
491 491  
492 -[[image:image-20230214094058-3.png]]
330 += 4. Build-in Server =
493 493  
494 494  
495 -=== 3.5.3 System ~-~-> Backup/Restore ===
333 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
496 496  
497 497  
498 -[[image:image-20231031162927-2.png]]
336 +[[image:image-20220820115644-1.png||height="217" width="778"]]
499 499  
500 500  
501 -=== 3.5.4 System ~-~-> Remoteit ===
339 +(% style="color:red" %)**Note:**
502 502  
341 + **Path**: System ~-~-> Built-in Server
503 503  
504 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
505 505  
344 +**Troubleshooting:**
506 506  
507 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
508 508  
509 -[[image:image-20221230092303-2.png]]
347 +**~ 1. URL does not jump properly**
510 510  
349 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
511 511  
512 -=== 3.5.5 System ~-~-> Package Management ===
351 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
513 513  
514 514  
515 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
354 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
516 516  
517 -[[image:image-20230214094316-4.png]]
518 518  
357 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
519 519  
520 -= 4. Build-in Server =
359 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
521 521  
522 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
523 523  
362 +Login account:
524 524  
525 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
364 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
526 526  
527 -[[image:image-20231106180816-4.png||height="416" width="896"]]
366 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
528 528  
529 -[[image:image-20231201165904-1.png||height="466" width="899"]]
530 530  
531 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
369 +[[image:image-20220725171719-1.png||height="570" width="769"]]
532 532  
533 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
534 534  
372 +== 4.2 Application Server ~-~- Node-Red ==
535 535  
536 536  
537 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
375 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
538 538  
539 539  
540 -[[image:image-20230616175558-7.png||height="362" width="894"]]
378 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
541 541  
542 -[[image:image-20231201170355-2.png||height="536" width="899"]]
543 543  
544 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
381 +[[image:image-20220725172124-3.png||height="610" width="843"]]
545 545  
546 546  
547 547  
548 -== **2). Troubleshooting:** ==
385 +=== **Using Node-Red, InfluxDB and Grafana** ===
549 549  
387 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
550 550  
551 -**~1. If the URL does not jump properly.**
552 552  
553 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
390 +the users can refer to this link to install them.
554 554  
555 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
392 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
556 556  
557 -**2. How to install InfluxDB, Garfana.**
558 558  
559 - The LPS8V2 is not pre-installed InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
395 += 5. How users can access LPS8v2 using serial USB =
560 560  
561 -**3. How to upgade the gateway node.js to the latest version.**
562 562  
563 - The user can upgrade nodejs, see [[Upgarde Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
398 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
564 564  
565 -**4. How bath register device on the built-in Chirpstack network server**
566 566  
567 - The user can register devices in batch on the gateway Web UI, see
401 +Port 1 of the UART on the LPS8v2 is GND
568 568  
569 -(% class="wikigeneratedid" id="H4.3A0Howtodisablethebuilt-inserver" %)
570 -**5. How to disable the built-in server**
571 -
572 572  (% class="box infomessage" %)
573 573  (((
574 -Use the following commands to start and stop the TTNv3 service:**  **
405 +**TXD  <~-~--> UART RXD (Gray line)**
575 575  
576 -**# start**
577 -systemctl start ttnstack
407 +**RXD  <~-~--> UART TXD (White line)**
578 578  
579 -**# stop**
580 -systemctl stop ttnstack
581 -
582 -**# enable**
583 -systemctl enable ttnstack
584 -
585 -**#disable**
586 -systemctl disable ttnstack
409 +**GND <~-~--> GND (Black line)**
587 587  )))
588 588  
589 -(% class="box infomessage" %)
590 -(((
591 -Use the following commands to start and stop the Node-Red service:
592 592  
593 -**# start**
594 -systemctl start nodered
413 +**LPS8v2 UART connection photo**
595 595  
596 -**# stop**
597 -systemctl stop nodered
415 +[[image:image-20220804163015-1.png||height="621" width="466"]]
598 598  
599 -**# enable**
600 -systemctl enable nodered
601 601  
602 -**#disable**
603 -systemctl disable nodered
604 -)))
605 605  
419 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
606 606  
607 -(% class="wikigeneratedid" id="H4.4A0WhymygatewayisnotChirpstack3F" %)
608 -6. Why my gateway is not Chirpstack?
609 609  
610 -After June '23, the default factory LPS8V2 pre-installed Chirpstack-V2 instead of The Things Stack, the users can migrate to Chistack-V4 by the below instruction
422 +[[image:image-20220804164928-3.png||height="320" width="332"]]
611 611  
612 -**[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
613 613  
425 +[[image:image-20220804164747-2.png||height="622" width="594"]]
614 614  
615 -=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
616 616  
428 += 6. Use the helium gateway-rs as the Data-only Hotspot =
617 617  
618 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
619 619  
620 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
431 +== **Step 1: Configure Frequency Band** ==
621 621  
622 -[[image:image-20230602140406-3.png||height="480" width="918"]]
623 623  
434 +//Each country has a requirement for frequency region. Choose the right one for your area.//
624 624  
625 -When the configuration is complete, click** "Save&Apply"**.
436 +[[image:image-20220905164308-1.png]]
626 626  
627 627  
628 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
629 629  
630 -[[image:image-20230602143122-4.png||height="511" width="983"]]
440 +== **Step 2: Configure the forward address** ==
631 631  
632 632  
633 -= 5. Watch Dog =
443 +**Select one of the servers to configure.**
634 634  
445 +**For example:**
635 635  
636 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
447 +[[image:image-20220905164847-2.png]]
637 637  
638 -The uses can be via the below method to enable Watch Dog:
639 639  
640 640  
641 -(% class="box infomessage" %)
642 -(((
643 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
644 -)))
451 +== **Step 3: Download and Install the Helium-gateway-rs** ==
645 645  
646 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
647 647  
454 +**Access the gateway CLI via SSH.**
648 648  
456 +[[image:image-20220905165222-3.png]]
649 649  
650 -= 6. How users can access LPS8-V2 using serial USB =
651 651  
459 +**Download gateway-rs.**
652 652  
653 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
461 +[[image:image-20220905165715-5.png]]
654 654  
655 -Port 1 of the UART on the LPS8-V2 is GND
656 -
657 657  (% class="box infomessage" %)
658 658  (((
659 -**TXD  <~-~--> UART RXD (Gray line)**
660 -
661 -**RXD  <~-~--> UART TXD (White line)**
662 -
663 -**GND <~-~--> GND (Black line)**
465 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
664 664  )))
665 665  
666 -**LPS8v2 UART connection photo**
667 667  
668 -[[image:image-20230421094319-2.png||height="351" width="392"]]
469 +**Install gateway-rs.**
669 669  
670 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
471 +[[image:image-20220905165917-7.png]]
671 671  
672 -
673 -[[image:image-20220804164928-3.png||height="320" width="332"]]
674 -
675 -
676 -[[image:image-20220804164747-2.png||height="622" width="594"]]
677 -
678 -
679 -= 7. OTA System Update =
680 -
681 -
682 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
683 -
684 -
685 -== 7.1 Auto-update method ==
686 -
687 -
688 -The default, each gateway will enable the auto-update function.
689 -
690 -this function will be triggered every boot and every midnight.
691 -
692 -
693 -Users can enable/disable it via Web Page
694 -
695 -[[image:image-20230607094447-2.png]]
696 -
697 -
698 -== 7.2 Manual upgrade method ==
699 -
700 -
701 -1). Using the Linux command to upgrade the system
702 -
703 -
704 704  (% class="box infomessage" %)
705 705  (((
706 -**apt update && apt install *dragino***
475 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
707 707  )))
708 708  
709 709  
710 -2). Upgrade the system via the Web page button of "Manual Update"
479 +**Modify configuration.**
711 711  
712 712  
713 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
482 +[[image:image-20220905173847-12.png]]
714 714  
715 -[[image:image-20230607093849-1.png]]
716 716  
717 -
718 -
719 -= 8. FAQ =
720 -
721 -== 8.1 How to change Hostname ==
722 -
723 -
724 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
725 -
726 726  (% class="box infomessage" %)
727 727  (((
728 -hostnamectl set-hostname dragino-123456
487 +**region=<Enter regional parameters> \
488 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
489 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
729 729  )))
730 730  
731 -[[image:image-20230517102429-1.png]]
732 732  
733 -After the configuration is complete, run "reboot" to restart the gateway.
493 +**Restart the helium_gateway**
734 734  
495 +[[image:image-20220905170920-9.png]]
735 735  
736 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
737 737  
738 -
739 -Migrate guide:
740 -
741 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
742 -
743 -**2. On the Server ~-~-> Network Server interface, click "Management"**
744 -
745 -[[image:image-20230616162454-1.png]]
746 -
747 -
748 -**3. Click "Migrate-Chirpstack"**
749 -
750 -[[image:image-20230616162742-2.png]]
751 -
752 -
753 -**4. Strat Install **
754 -
755 -Click start Install and wait until the migration succeeds
756 -
757 -[[image:image-20230616162934-3.png]]
758 -
759 -
760 -**5.Migration complete check result**
761 -
762 -[[image:image-20230616174526-4.png||height="706" width="983"]]
763 -
764 -
765 -[[image:image-20230616180004-9.png]]
766 -
767 -
768 -== 8.3 How to reduce the 4g data consumed ==
769 -
770 -
771 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
772 -
773 -[[image:image-20230719100239-1.png||height="724" width="994"]]
774 -
775 -
776 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
777 -
778 -[[image:image-20230719100332-2.png]]
779 -
780 -
781 -3. Disable the auto-update:
782 -
783 -[[image:image-20230719100419-3.png||height="458" width="995"]]
784 -
785 -
786 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
787 -
788 -
789 789  (% class="box infomessage" %)
790 790  (((
791 -apt update && apt install helium-gateway
500 +**systemctl restart helium_gateway**
792 792  )))
793 793  
794 794  
795 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
504 +**Check the helium_gateway Log：**
796 796  
506 +[[image:image-20220905173952-13.png]]
797 797  
798 -By default, the LPS8v2's built-in server is ChirpStack v4,
799 799  
800 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
801 -
802 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
803 -
804 -
805 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
806 -
807 -
808 -== 8.6 How do I view gateway logs ==
809 -
810 -=== 8.6.1 LoRaWAN Log: ===
811 -
812 -==== Semtech UDP Log : ====
813 -
814 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
815 -
816 -[[image:image-20231017112115-2.png||height="611" width="821"]]
817 -
818 -
819 -==== Station Log: ====
820 -
821 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
822 -
823 -[[image:image-20231017111606-1.png||height="622" width="821"]]
824 -
825 -
826 -=== 8.6.2  4G Log ===
827 -
828 -The user needs to access the Linux console of the gateway and enter the following command:
829 -
830 830  (% class="box infomessage" %)
831 831  (((
832 -cat /var/log/qmilog.txt
511 +**journalctl -u helium_gateway -f**
833 833  )))
834 834  
835 -[[image:image-20231017114417-3.png||height="543" width="679"]]
836 836  
837 -=== 8.6.3 Dmesg Log ===
515 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
838 838  
839 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
517 +where the helium gateway log is shown:
840 840  
841 -[[image:image-20231017115330-5.png||height="565" width="740"]]
519 +[[image:image-20220905174534-14.png]]
842 842  
843 843  
844 -=== 8.6.4 Record Log ===
522 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
845 845  
846 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
847 847  
848 -[[image:image-20231017115124-4.png||height="215" width="880"]]
525 += 7. OTA System Update =
849 849  
850 850  
851 -= 9. Trouble Shooting =
528 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
852 852  
853 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
854 854  
531 += 8. Trouble Shooting =
855 855  
533 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
534 +
535 +
856 856  [[image:image-20220920135918-1.png]]
857 857  
858 858  
... ... @@ -868,96 +868,28 @@
868 868  [[image:image-20220920141936-2.png]]
869 869  
870 870  
871 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
551 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
872 872  
873 873  
874 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
875 -
876 -[[image:image-20230508171607-1.png]]
877 -
878 -
879 -== 9.3  Fallback IP does not work, how can users check ==
880 -
881 -
882 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
883 -
884 -
885 -**1.Check whether the configuration is correct**
886 -
887 -Run the CMD command to ipconfig and ping 172.31.255.254.
888 -
889 -If this fails, the user needs to reconfigure.
890 -
891 -[[image:image-20230413170224-3.png||height="433" width="707"]]
892 -
893 -[[image:image-20230413170246-4.png]]
894 -
895 -
896 -**2. Check whether the firewall is disabled**
897 -
898 -If the firewall is not down, this will affect access to the gateway.
899 -
900 -
901 -== 9.4  Click "Manual_Update", why there is no response? ==
902 -
903 -
904 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
905 -
906 -
907 -[[image:image-20230527090555-3.png||height="660" width="832"]]
908 -
909 -
910 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
911 -
912 -
913 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
914 -
915 -
916 -(% class="box infomessage" %)
917 917  (((
918 -apt update && apt install *dragino*
919 -
920 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
555 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
921 921  )))
922 922  
923 -
924 -== 9.6  How to reset the built-in server ==
925 -
926 -
927 -**1) Build-in The Things Network**
928 -
929 -Refer to this link to delete the Built-in server's device.
930 -
931 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
932 -
933 -
934 -**2) Build-in Chirpstack**
935 -
936 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
937 -
938 -[[image:image-20231106180846-5.png||height="310" width="668"]]
939 -
940 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
941 -
942 -
943 943  (((
944 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
945 -)))
559 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
946 946  
947 -(((
948 -With your question as detailed as possible. We will reply and help you in the shortest.
949 949  
562 += 10. Reference =
950 950  
951 -= 11. Reference =
952 952  
953 -
954 954  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
955 955  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
956 956  
568 +
957 957  
958 958  )))
959 959  
960 -= 12. Order Info =
572 += 11. Order Info =
961 961  
962 962  
963 963  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -965,31 +965,23 @@
965 965  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
966 966  
967 967  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
968 -
969 969  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
970 -
971 971  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
972 -
973 973  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
974 -
975 975  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
976 -
977 977  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
978 978  
979 979  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
980 980  
981 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
588 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
589 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
590 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
591 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
982 982  
983 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
984 -
985 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
986 -
987 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
988 -
989 989  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
990 990  
991 991  
992 -= 13. Manufacturer Info =
596 += 12. Manufacturer Info =
993 993  
994 994  
995 995  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -999,7 +999,7 @@
999 999  LongCheng Street, LongGang District ; Shenzhen 518116,China
1000 1000  
1001 1001  
1002 -= 14. FCC Warning =
606 += 13. FCC Warning =
1003 1003  
1004 1004  
1005 1005  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0