Last modified by Kilight Cao on 2025/02/08 14:05
<
From version < 277.1 >
edited by Xiaoye
on 2023/12/01 17:19
To version < 69.7 >
edited by Xiaoling
on 2022/07/28 17:49
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -13,25 +13,22 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
27 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
31 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
39 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -52,23 +52,29 @@
52 52  * RAM: 512MB
53 53  * eMMC: 4GB
54 54  
53 +
54 +
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
61 +
62 +
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
70 70  
71 71  
71 +
72 +
73 +== **1.3 Features** ==
74 +
75 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -81,131 +81,90 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
88 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
89 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
91 +== **1.4 Block Diagram** ==
88 88  
89 89  
90 -LPS8-V2 has totally four LEDs, They are:
91 91  
95 +== **1.5 LED Indicators** ==
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
98 +LPS8-V2 has totally four LEDs, They are:
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
101 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
104 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
107 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
107 107  
108 -== 1.5 Button Intruction ==
109 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
109 109  
111 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
110 110  
111 -LPS8-V2 has a black toggle button, which is:
113 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
113 113  
114 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
116 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
120 += **2. Quick Start** =
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
123 -
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 -= 2. Quick Start =
130 -
131 -
132 132  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
133 133  
134 134  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
135 135  
136 136  
137 -== 2.1 Access and Configure LPS8-V2 ==
138 138  
139 -=== 2.1.1 Find IP address of LPS8-V2 ===
129 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
140 140  
141 141  
142 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
132 +== **2.1.1 connect the network.** ==
143 143  
134 +=== ===
144 144  
145 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
136 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
146 146  
147 -(% style="background-color:yellow" %)**dragino+dragino**
148 148  
149 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
139 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
150 150  
151 -[[image:image-20230527084515-1.png]]
152 -
153 -[[image:image-20230527085250-2.png||height="495" width="284"]]
154 -
155 -
156 -
157 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
158 -
159 -
160 -(((
161 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
162 -)))
163 -
164 -(((
165 165  You can also use this IP to connect.
166 -)))
167 167  
168 168  [[image:image-20220622100129-1.png||height="332" width="1263"]]
169 169  
170 170  
171 171  
172 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
147 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
173 173  
174 174  
175 -[[image:image-20230107084650-2.png||height="310" width="839"]]
150 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
176 176  
177 177  
178 -(% style="color:blue" %)**Steps to connect via fallback IP:**
153 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
179 179  
180 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
181 181  
182 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
183 183  
157 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
184 184  
185 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
159 +1. Connect PC's Ethernet port to LPS8-V2's WAN port
186 186  
161 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
187 187  
188 -As in the below photo:
163 +[[image:image-20220622101433-4.png]]
189 189  
190 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
191 191  
166 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
192 192  
193 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
194 194  
195 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
169 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
196 196  
197 197  
198 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
199 -
200 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
201 -
202 -
203 -
204 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
205 -
206 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
207 -
208 -
209 209  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
210 210  
211 211  
... ... @@ -219,125 +219,30 @@
219 219  [[image:image-20220622102847-7.png]]
220 220  
221 221  
222 -[[image:image-20220622102901-8.png||height="476" width="938"]]
185 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
223 223  
224 224  
225 -=== 2.1.2 Access Configure Web UI ===
226 226  
189 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
227 227  
228 -**Web Interface**
229 229  
230 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
192 +=== **2.2.1 Select your area frequency** ===
231 231  
232 232  
233 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
234 -
235 -You will see the login interface of LPS8-V2 as shown below.
236 -
237 -The account details for Web Login are:
238 -
239 -(% style="color:blue" %)**User Name: root**
240 -
241 -(% style="color:blue" %)**Password:   dragino**
242 -
243 -[[image:image-20230106153501-1.png||height="367" width="894"]]
244 -
245 -
246 -== 2.2  Typical Network Setup ==
247 -
248 -=== 2.2.1  Overview ===
249 -
250 -
251 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
252 -
253 -* **WAN Port Internet Mode**
254 -
255 -* **WiFi Client Mode**
256 -
257 -* **Cellular Mode**
258 -
259 -=== 2.2.2  Use WAN port to access Internet ===
260 -
261 -
262 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
263 -
264 -
265 -[[image:image-20230411100633-2.png||height="501" width="935"]]
266 -
267 -
268 -=== 2.2.3  Access the Internet as a WiFi Client ===
269 -
270 -
271 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
272 -
273 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
274 -
275 -[[image:image-20230411095739-1.png||height="264" width="691"]]
276 -
277 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
278 -
279 -
280 -=== 2.2.4  Use built-in 4G modem for internet access ===
281 -
282 -
283 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
284 -
285 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
286 -
287 -
288 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
289 -
290 -First, install the Micro SIM card as below direction
291 -
292 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
293 -
294 -
295 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
296 -
297 -
298 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
299 -
300 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
301 -
302 -
303 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
304 -
305 -
306 -=== 2.2.5  Check Internet connection ===
307 -
308 -
309 -In the **home** page, we can check the Internet connection.
310 -
311 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
312 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
313 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
314 -
315 -[[image:image-20230411101534-3.png||height="544" width="942"]]
316 -
317 -
318 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
319 -
320 -=== 2.3.1 Select your area frequency ===
321 -
322 -
323 -(((
324 324  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
325 325  
326 -
327 -)))
197 +[[image:image-20220622103332-9.png]]
328 328  
329 -[[image:image-20220622103332-9.png||height="485" width="938"]]
330 330  
331 331  
332 -=== 2.3.2 Get the only gateway EUI ===
201 +=== **2.2.2 Get the only gateway EUI** ===
333 333  
334 334  
335 335  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
336 336  
206 +[[image:image-20220622103355-10.png]]
337 337  
338 -[[image:image-20220622103355-10.png||height="698" width="949"]]
339 339  
340 -
341 341  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
342 342  
343 343  
... ... @@ -353,9 +353,10 @@
353 353  [[image:image-20220622103956-12.png]]
354 354  
355 355  
356 -=== 2.3.3 Register the gateway to The Things Network ===
357 357  
225 +== 2.2.3 Register the gateway to The Things Network ==
358 358  
227 +
359 359  **Login to The Things Network**
360 360  
361 361  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -369,592 +369,191 @@
369 369  **Get it online**
370 370  
371 371  
372 -= 3. Web Configure Pages =
373 373  
374 -== 3.1 Home ==
242 += **3. Web Configure Pages** =
375 375  
376 376  
377 -Shows the system running status:
245 +== **3.1 Home** ==
378 378  
379 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
380 380  
248 +//Shows the system running status~://
381 381  
382 -== 3.2 LoRa Settings ==
383 383  
384 -=== 3.2.1 LoRa ~-~-> LoRa ===
251 +== **3.2 LoRa Settings** ==
385 385  
386 386  
387 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
254 +=== **3.2.1 LoRa ~-~-> LoRa** ===
388 388  
389 -Different LPS8v2 hardware versions can support different frequency ranges:
390 390  
391 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
392 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
257 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
393 393  
394 -(% class="wikigeneratedid" %)
395 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
259 +//Different LPS8v2 hardware versions can support different frequency ranges~://
396 396  
261 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
262 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
397 397  
398 398  (% class="wikigeneratedid" %)
265 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
266 +
267 +(% class="wikigeneratedid" %)
399 399  [[image:image-20220616110739-1.png||height="372" width="682"]]
400 400  
401 401  
402 402  (((
403 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
272 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
404 404  )))
405 405  
406 406  
407 -== 3.3 LoRaWAN Settings ==
408 408  
409 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
277 +== **3.3 LoRaWAN Settings** ==
410 410  
411 411  
412 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
280 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
413 413  
414 414  
283 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
284 +
415 415  [[image:image-20220616111932-2.png||height="516" width="672"]]
416 416  
417 417  
418 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
419 419  
289 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
420 420  
421 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
422 422  
292 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
423 423  
424 424  [[image:image-20220616113246-3.png||height="396" width="672"]]
425 425  
426 426  
427 -(((
428 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
429 -)))
297 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
430 430  
431 431  
432 -== 3.4 Network Settings ==
433 433  
434 -=== 3.4.1 Network ~-~-> WiFi ===
301 +== **3.4 Network Settings** ==
435 435  
436 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
437 437  
438 -[[image:image-20230619095946-1.png||height="332" width="827"]]
304 +=== **3.4.1 Network ~-~-> WiFi** ===
439 439  
440 440  
441 -=== 3.4.2 Network ~-~-> System Status ===
307 +[[image:image-20220616114756-4.png||height="251" width="669"]]
442 442  
443 443  
444 -[[image:image-20220820134112-2.png||height="539" width="668"]]
445 445  
311 +=== **3.4.2 Network ~-~-> System Status** ===
446 446  
447 -=== 3.4.3 Network ~-~-> Network ===
448 448  
314 +[[image:image-20220616115229-5.png||height="548" width="665"]]
449 449  
450 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
451 451  
452 -[[image:image-20230214093657-2.png||height="333" width="858"]]
453 453  
318 +=== **3.4.3 Network ~-~-> Firewall** ===
454 454  
455 -=== 3.4.4 Network ~-~-> Cellular ===
456 456  
321 +[[image:image-20220616115351-6.png||height="244" width="661"]]
457 457  
458 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
459 459  
460 -(% style="color:red" %)**Note: APN cannot be empty.**
461 461  
462 -[[image:image-20230228115126-1.png]]
325 +== **3.5 System** ==
463 463  
464 464  
465 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
328 +=== **3.5.1  System ~-~-> System Overview** ===
466 466  
467 -[[image:image-20230228115535-2.png||height="478" width="888"]]
468 468  
469 -
470 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
471 -
472 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
473 -
474 -
475 -== 3.5 System ==
476 -
477 -=== 3.5.1 System ~-~-> System Overview ===
478 -
479 -
480 480  Shows the system info:
481 481  
482 -[[image:image-20231031162854-1.png]]
483 483  
484 484  
485 -=== 3.5.2 System ~-~-> System General ===
335 +=== **3.5.2 System ~-~-> Backup/Restore** ===
486 486  
487 487  
488 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
338 +[[image:image-20220616115808-7.png||height="194" width="649"]]
489 489  
490 -In addition, Users can customize the FallBack IP address.
491 491  
492 -[[image:image-20230214094058-3.png]]
493 493  
342 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
494 494  
495 -=== 3.5.3 System ~-~-> Backup/Restore ===
496 496  
345 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
497 497  
498 -[[image:image-20231031162927-2.png]]
347 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
499 499  
500 500  
501 -=== 3.5.4 System ~-~-> Remoteit ===
350 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
502 502  
503 503  
504 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
353 +Login account:
505 505  
355 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
506 506  
507 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
357 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
508 508  
509 -[[image:image-20221230092303-2.png]]
510 510  
360 +[[image:image-20220725171719-1.png||height="570" width="769"]]
511 511  
512 -=== 3.5.5 System ~-~-> Package Management ===
513 513  
363 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
364 + You can complete the installation manually with the following command.**
514 514  
515 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
516 516  
517 -[[image:image-20230214094316-4.png]]
518 -
519 -
520 -= 4. Build-in Server =
521 -
522 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
523 -
524 -
525 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
526 -
527 -[[image:image-20231106180816-4.png||height="416" width="896"]]
528 -
529 -[[image:image-20231201165904-1.png||height="466" width="899"]]
530 -
531 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
532 -
533 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
534 -
535 -
536 -
537 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
538 -
539 -
540 -[[image:image-20230616175558-7.png||height="362" width="894"]]
541 -
542 -[[image:image-20231201170355-2.png||height="536" width="899"]]
543 -
544 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
545 -
546 -
547 -
548 -**Troubleshooting:**
549 -
550 -**~ 1. If the URL does not jump properly.**
551 -
552 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
553 -
554 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
555 -
556 - **2. How to install InfluxDB, Garfana.**
557 -
558 - The LPS8V2 is not pre-installed InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
559 -
560 - **3. How to upgade the gateway node.js to the latest version.**
561 -
562 - The user can upgrade nodejs, see [[Upgarde Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
563 -
564 -
565 -
566 -== 4.3 How to disable the built-in server ==
567 -
568 -
569 -Use the following commands to start and stop the TTNv3 service:
570 -
571 571  (% class="box infomessage" %)
572 572  (((
573 -**# start**
574 -systemctl start ttnstack
369 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
575 575  
576 -**# stop**
577 -systemctl stop ttnstack
578 -
579 -**# enable**
580 -systemctl enable ttnstack
581 -
582 -**#disable**
583 -systemctl disable ttnstack
371 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
584 584  )))
585 585  
586 -Use the following commands to start and stop the Node-Red service:
587 587  
588 -(% class="box infomessage" %)
589 -(((
590 -**# start**
591 -systemctl start nodered
592 592  
593 -**# stop**
594 -systemctl stop nodered
376 += **5. Build-in Application Server ~-~- Node-Red** =
595 595  
596 -**# enable**
597 -systemctl enable nodered
598 598  
599 -**#disable**
600 -systemctl disable nodered
601 -)))
379 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
602 602  
381 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
603 603  
604 -== 4.4 Why my gateway is not Chirpstack? ==
605 605  
384 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
606 606  
607 -The newly shipout LPS8v2 already have ChirpStack built-in by default. Older units might have built-in TTN Stack v3 server, in this case, user can change from TTN Stack v3 to ChirpStack by below instruction.
608 608  
609 -**[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
387 +[[image:image-20220725172124-3.png||height="610" width="843"]]
610 610  
611 611  
612 -=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
390 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
391 + You can complete the installation manually with the following command.**
613 613  
614 614  
615 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
616 616  
617 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
618 -
619 -[[image:image-20230602140406-3.png||height="480" width="918"]]
620 -
621 -
622 -When the configuration is complete, click** "Save&Apply"**.
623 -
624 -
625 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
626 -
627 -[[image:image-20230602143122-4.png||height="511" width="983"]]
628 -
629 -
630 -= 5. Watch Dog =
631 -
632 -
633 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
634 -
635 -The uses can be via the below method to enable Watch Dog:
636 -
637 -
638 638  (% class="box infomessage" %)
639 639  (((
640 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
397 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
398 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
641 641  )))
642 642  
643 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
401 +[[image:image-20220728102000-1.png]]
644 644  
645 645  
646 646  
647 -= 6. How users can access LPS8-V2 using serial USB =
405 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
648 648  
649 649  
650 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
651 -
652 -Port 1 of the UART on the LPS8-V2 is GND
653 -
654 -(% class="box infomessage" %)
655 655  (((
656 -**TXD  <~-~--> UART RXD (Gray line)**
657 -
658 -**RXD  <~-~--> UART TXD (White line)**
659 -
660 -**GND <~-~--> GND (Black line)**
409 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
661 661  )))
662 662  
663 -**LPS8v2 UART connection photo**
664 -
665 -[[image:image-20230421094319-2.png||height="351" width="392"]]
666 -
667 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
668 -
669 -
670 -[[image:image-20220804164928-3.png||height="320" width="332"]]
671 -
672 -
673 -[[image:image-20220804164747-2.png||height="622" width="594"]]
674 -
675 -
676 -= 7. OTA System Update =
677 -
678 -
679 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
680 -
681 -
682 -== 7.1 Auto-update method ==
683 -
684 -
685 -The default, each gateway will enable the auto-update function.
686 -
687 -this function will be triggered every boot and every midnight.
688 -
689 -
690 -Users can enable/disable it via Web Page
691 -
692 -[[image:image-20230607094447-2.png]]
693 -
694 -
695 -== 7.2 Manual upgrade method ==
696 -
697 -
698 -1). Using the Linux command to upgrade the system
699 -
700 -
701 -(% class="box infomessage" %)
702 702  (((
703 -**apt update && apt install *dragino***
704 -)))
413 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
705 705  
706 706  
707 -2). Upgrade the system via the Web page button of "Manual Update"
708 708  
417 += **11 Reference** =
709 709  
710 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
711 711  
712 -[[image:image-20230607093849-1.png]]
713 -
714 -
715 -
716 -= 8. FAQ =
717 -
718 -== 8.1 How to change Hostname ==
719 -
720 -
721 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
722 -
723 -(% class="box infomessage" %)
724 -(((
725 -hostnamectl set-hostname dragino-123456
726 -)))
727 -
728 -[[image:image-20230517102429-1.png]]
729 -
730 -After the configuration is complete, run "reboot" to restart the gateway.
731 -
732 -
733 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
734 -
735 -
736 -Migrate guide:
737 -
738 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
739 -
740 -**2. On the Server ~-~-> Network Server interface, click "Management"**
741 -
742 -[[image:image-20230616162454-1.png]]
743 -
744 -
745 -**3. Click "Migrate-Chirpstack"**
746 -
747 -[[image:image-20230616162742-2.png]]
748 -
749 -
750 -**4. Strat Install **
751 -
752 -Click start Install and wait until the migration succeeds
753 -
754 -[[image:image-20230616162934-3.png]]
755 -
756 -
757 -**5.Migration complete check result**
758 -
759 -[[image:image-20230616174526-4.png||height="706" width="983"]]
760 -
761 -
762 -[[image:image-20230616180004-9.png]]
763 -
764 -
765 -== 8.3 How to reduce the 4g data consumed ==
766 -
767 -
768 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
769 -
770 -[[image:image-20230719100239-1.png||height="724" width="994"]]
771 -
772 -
773 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
774 -
775 -[[image:image-20230719100332-2.png]]
776 -
777 -
778 -3. Disable the auto-update:
779 -
780 -[[image:image-20230719100419-3.png||height="458" width="995"]]
781 -
782 -
783 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
784 -
785 -
786 -(% class="box infomessage" %)
787 -(((
788 -apt update && apt install helium-gateway
789 -)))
790 -
791 -
792 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
793 -
794 -
795 -By default, the LPS8v2's built-in server is ChirpStack v4,
796 -
797 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
798 -
799 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
800 -
801 -
802 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
803 -
804 -
805 -== 8.6 How do I view gateway logs ==
806 -
807 -=== 8.6.1 LoRaWAN Log: ===
808 -
809 -==== Semtech UDP Log : ====
810 -
811 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
812 -
813 -[[image:image-20231017112115-2.png||height="611" width="821"]]
814 -
815 -
816 -==== Station Log: ====
817 -
818 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
819 -
820 -[[image:image-20231017111606-1.png||height="622" width="821"]]
821 -
822 -
823 -=== 8.6.2  4G Log ===
824 -
825 -The user needs to access the Linux console of the gateway and enter the following command:
826 -
827 -(% class="box infomessage" %)
828 -(((
829 -cat /var/log/qmilog.txt
830 -)))
831 -
832 -[[image:image-20231017114417-3.png||height="543" width="679"]]
833 -
834 -=== 8.6.3 Dmesg Log ===
835 -
836 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
837 -
838 -[[image:image-20231017115330-5.png||height="565" width="740"]]
839 -
840 -
841 -=== 8.6.4 Record Log ===
842 -
843 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
844 -
845 -[[image:image-20231017115124-4.png||height="215" width="880"]]
846 -
847 -
848 -= 9. Trouble Shooting =
849 -
850 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
851 -
852 -
853 -[[image:image-20220920135918-1.png]]
854 -
855 -
856 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
857 -
858 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
859 -
860 -
861 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
862 -
863 -**Click the update URL button to configure the URL with the current eth port address.**
864 -
865 -[[image:image-20220920141936-2.png]]
866 -
867 -
868 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
869 -
870 -
871 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
872 -
873 -[[image:image-20230508171607-1.png]]
874 -
875 -
876 -== 9.3  Fallback IP does not work, how can users check ==
877 -
878 -
879 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
880 -
881 -
882 -**1.Check whether the configuration is correct**
883 -
884 -Run the CMD command to ipconfig and ping 172.31.255.254.
885 -
886 -If this fails, the user needs to reconfigure.
887 -
888 -[[image:image-20230413170224-3.png||height="433" width="707"]]
889 -
890 -[[image:image-20230413170246-4.png]]
891 -
892 -
893 -**2. Check whether the firewall is disabled**
894 -
895 -If the firewall is not down, this will affect access to the gateway.
896 -
897 -
898 -== 9.4  Click "Manual_Update", why there is no response? ==
899 -
900 -
901 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
902 -
903 -
904 -[[image:image-20230527090555-3.png||height="660" width="832"]]
905 -
906 -
907 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
908 -
909 -
910 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
911 -
912 -
913 -(% class="box infomessage" %)
914 -(((
915 -apt update && apt install *dragino*
916 -
917 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
918 -)))
919 -
920 -
921 -== 9.6  How to reset the built-in server ==
922 -
923 -
924 -**1) Build-in The Things Network**
925 -
926 -Refer to this link to delete the Built-in server's device.
927 -
928 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
929 -
930 -
931 -**2) Build-in Chirpstack**
932 -
933 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
934 -
935 -[[image:image-20231106180846-5.png||height="310" width="668"]]
936 -
937 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
938 -
939 -
940 -(((
941 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
942 -)))
943 -
944 -(((
945 -With your question as detailed as possible. We will reply and help you in the shortest.
946 -
947 -
948 -= 11. Reference =
949 -
950 -
951 951  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
952 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
953 953  
954 954  
955 955  )))
956 956  
957 -= 12. Order Info =
425 += **12. Order Info** =
958 958  
959 959  
960 960  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -962,33 +962,27 @@
962 962  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
963 963  
964 964  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
965 -
966 966  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
967 -
968 968  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
969 -
970 970  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
971 -
972 972  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
973 -
974 974  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
975 975  
439 +
976 976  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
977 977  
978 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
442 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
443 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
444 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
445 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
979 979  
980 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
981 -
982 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
983 -
984 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
985 -
986 986  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
987 987  
988 988  
989 -= 13. Manufacturer Info =
990 990  
451 += **13. Manufacturer Info** =
991 991  
453 +
992 992  **Shenzhen Dragino Technology Development co. LTD**
993 993  
994 994  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -996,38 +996,23 @@
996 996  LongCheng Street, LongGang District ; Shenzhen 518116,China
997 997  
998 998  
999 -= 14. FCC Warning =
1000 1000  
462 += **14. FCC Warning** =
1001 1001  
1002 -(((
464 +
1003 1003  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1004 -)))
1005 1005  
1006 -(((
1007 1007  ~-~- Reorient or relocate the receiving antenna.
1008 -)))
1009 1009  
1010 -(((
1011 1011  ~-~- Increase the separation between the equipment and receiver.
1012 -)))
1013 1013  
1014 -(((
1015 1015  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
1016 -)))
1017 1017  
1018 -(((
1019 1019  ~-~- Consult the dealer or an experienced radio/TV technician for help.
1020 -)))
1021 1021  
1022 1022  
1023 -(((
1024 1024  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
1025 -)))
1026 1026  
1027 1027  
1028 -(((
1029 1029  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
1030 -
1031 -
1032 1032  )))
1033 -)))
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0