Last modified by Kilight Cao on 2025/02/07 14:57
<
From version < 277.1 >
edited by Xiaoye
on 2023/12/01 17:19
To version < 116.1 >
edited by Xiaoye
on 2022/11/21 11:30
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,16 +57,14 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
69 +== **1.3 Features** ==
70 70  
71 71  
72 72  * Open Source Debian system
... ... @@ -81,84 +81,72 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
87 +== **1.4 Block Diagram** ==
88 88  
89 89  
90 +
91 +== **1.5 LED Indicators** ==
92 +
93 +
90 90  LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
97 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
99 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
101 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
107 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
109 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
106 106  
107 107  
108 -== 1.5 Button Intruction ==
109 109  
113 +== **1.6 Button Intruction** ==
110 110  
115 +
111 111  LPS8-V2 has a black toggle button, which is:
112 112  
113 113  
114 114  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
121 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
124 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
126 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 125  
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
130 += **2. Quick Start** =
127 127  
128 128  
129 -= 2. Quick Start =
130 -
131 -
132 132  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
133 133  
134 134  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
135 135  
136 136  
137 -== 2.1 Access and Configure LPS8-V2 ==
138 138  
139 -=== 2.1.1 Find IP address of LPS8-V2 ===
139 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
140 140  
141 141  
142 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
142 +== **2.1.1 connect the network.** ==
143 143  
144 144  
145 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
145 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
146 146  
147 -(% style="background-color:yellow" %)**dragino+dragino**
148 148  
149 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
150 -
151 -[[image:image-20230527084515-1.png]]
152 -
153 -[[image:image-20230527085250-2.png||height="495" width="284"]]
154 -
155 -
156 -
157 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
158 -
159 -
160 160  (((
161 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
149 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
162 162  )))
163 163  
164 164  (((
... ... @@ -169,40 +169,9 @@
169 169  
170 170  
171 171  
172 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
160 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
173 173  
174 174  
175 -[[image:image-20230107084650-2.png||height="310" width="839"]]
176 -
177 -
178 -(% style="color:blue" %)**Steps to connect via fallback IP:**
179 -
180 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
181 -
182 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
183 -
184 -
185 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
186 -
187 -
188 -As in the below photo:
189 -
190 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
191 -
192 -
193 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
194 -
195 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
196 -
197 -
198 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
199 -
200 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
201 -
202 -
203 -
204 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
205 -
206 206  [[image:image-20220622100542-2.png||height="369" width="1256"]]
207 207  
208 208  
... ... @@ -222,104 +222,13 @@
222 222  [[image:image-20220622102901-8.png||height="476" width="938"]]
223 223  
224 224  
225 -=== 2.1.2 Access Configure Web UI ===
226 226  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
227 227  
228 -**Web Interface**
229 229  
230 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
231 231  
232 232  
233 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
234 -
235 -You will see the login interface of LPS8-V2 as shown below.
236 -
237 -The account details for Web Login are:
238 -
239 -(% style="color:blue" %)**User Name: root**
240 -
241 -(% style="color:blue" %)**Password:   dragino**
242 -
243 -[[image:image-20230106153501-1.png||height="367" width="894"]]
244 -
245 -
246 -== 2.2  Typical Network Setup ==
247 -
248 -=== 2.2.1  Overview ===
249 -
250 -
251 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
252 -
253 -* **WAN Port Internet Mode**
254 -
255 -* **WiFi Client Mode**
256 -
257 -* **Cellular Mode**
258 -
259 -=== 2.2.2  Use WAN port to access Internet ===
260 -
261 -
262 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
263 -
264 -
265 -[[image:image-20230411100633-2.png||height="501" width="935"]]
266 -
267 -
268 -=== 2.2.3  Access the Internet as a WiFi Client ===
269 -
270 -
271 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
272 -
273 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
274 -
275 -[[image:image-20230411095739-1.png||height="264" width="691"]]
276 -
277 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
278 -
279 -
280 -=== 2.2.4  Use built-in 4G modem for internet access ===
281 -
282 -
283 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
284 -
285 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
286 -
287 -
288 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
289 -
290 -First, install the Micro SIM card as below direction
291 -
292 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
293 -
294 -
295 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
296 -
297 -
298 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
299 -
300 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
301 -
302 -
303 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
304 -
305 -
306 -=== 2.2.5  Check Internet connection ===
307 -
308 -
309 -In the **home** page, we can check the Internet connection.
310 -
311 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
312 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
313 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
314 -
315 -[[image:image-20230411101534-3.png||height="544" width="942"]]
316 -
317 -
318 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
319 -
320 -=== 2.3.1 Select your area frequency ===
321 -
322 -
323 323  (((
324 324  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
325 325  
... ... @@ -329,9 +329,10 @@
329 329  [[image:image-20220622103332-9.png||height="485" width="938"]]
330 330  
331 331  
332 -=== 2.3.2 Get the only gateway EUI ===
333 333  
199 +=== **2.2.2 Get the only gateway EUI** ===
334 334  
201 +
335 335  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
336 336  
337 337  
... ... @@ -353,9 +353,10 @@
353 353  [[image:image-20220622103956-12.png]]
354 354  
355 355  
356 -=== 2.3.3 Register the gateway to The Things Network ===
357 357  
224 +== **2.2.3 Register the gateway to The Things Network** ==
358 358  
226 +
359 359  **Login to The Things Network**
360 360  
361 361  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -369,30 +369,34 @@
369 369  **Get it online**
370 370  
371 371  
372 -= 3. Web Configure Pages =
373 373  
374 -== 3.1 Home ==
241 += **3. Web Configure Pages** =
375 375  
376 376  
377 -Shows the system running status:
244 +== **3.1 Home** ==
378 378  
246 +
247 +//Shows the system running status~://
248 +
379 379  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
380 380  
381 381  
382 -== 3.2 LoRa Settings ==
383 383  
384 -=== 3.2.1 LoRa ~-~-> LoRa ===
253 +== **3.2 LoRa Settings** ==
385 385  
386 386  
387 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
256 +=== **3.2.1 LoRa ~-~-> LoRa** ===
388 388  
389 -Different LPS8v2 hardware versions can support different frequency ranges:
390 390  
391 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
392 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
259 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
393 393  
261 +//Different LPS8v2 hardware versions can support different frequency ranges~://
262 +
263 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
264 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
265 +
394 394  (% class="wikigeneratedid" %)
395 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
267 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
396 396  
397 397  
398 398  (% class="wikigeneratedid" %)
... ... @@ -404,23 +404,26 @@
404 404  )))
405 405  
406 406  
407 -== 3.3 LoRaWAN Settings ==
408 408  
409 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
280 +== **3.3 LoRaWAN Settings** ==
410 410  
411 411  
412 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
283 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
413 413  
414 414  
286 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
287 +
288 +
415 415  [[image:image-20220616111932-2.png||height="516" width="672"]]
416 416  
417 417  
418 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
419 419  
293 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
420 420  
421 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
422 422  
296 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
423 423  
298 +
424 424  [[image:image-20220616113246-3.png||height="396" width="672"]]
425 425  
426 426  
... ... @@ -429,425 +429,253 @@
429 429  )))
430 430  
431 431  
432 -== 3.4 Network Settings ==
433 433  
434 -=== 3.4.1 Network ~-~-> WiFi ===
308 +== **3.4 Network Settings** ==
435 435  
436 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
437 437  
438 -[[image:image-20230619095946-1.png||height="332" width="827"]]
311 +=== **3.4.1 Network ~-~-> WiFi** ===
439 439  
440 440  
441 -=== 3.4.2 Network ~-~-> System Status ===
314 +[[image:image-20220616114756-4.png||height="251" width="669"]]
442 442  
443 443  
444 -[[image:image-20220820134112-2.png||height="539" width="668"]]
445 445  
318 +=== **3.4.2 Network ~-~-> System Status** ===
446 446  
447 -=== 3.4.3 Network ~-~-> Network ===
448 448  
321 +[[image:image-20220820134112-2.png||height="539" width="668"]]
449 449  
450 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
451 451  
452 -[[image:image-20230214093657-2.png||height="333" width="858"]]
453 453  
325 +=== **3.4.3 Network ~-~-> Firewall** ===
454 454  
455 -=== 3.4.4 Network ~-~-> Cellular ===
456 456  
328 +[[image:image-20220616115351-6.png||height="244" width="661"]]
457 457  
458 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
459 459  
460 -(% style="color:red" %)**Note: APN cannot be empty.**
461 461  
462 -[[image:image-20230228115126-1.png]]
332 +== **3.5 System** ==
463 463  
464 464  
465 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
335 +=== **3.5.1  System ~-~-> System Overview** ===
466 466  
467 -[[image:image-20230228115535-2.png||height="478" width="888"]]
468 468  
338 +Shows the system info:
469 469  
470 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
340 +[[image:image-20220917144512-5.png||height="618" width="853"]]
471 471  
472 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
473 473  
474 474  
475 -== 3.5 System ==
344 +=== **3.5.2 System ~-~-> Backup/Restore** ===
476 476  
477 -=== 3.5.1 System ~-~-> System Overview ===
478 478  
347 +[[image:image-20220917144725-6.png||height="208" width="869"]]
479 479  
480 -Shows the system info:
481 481  
482 -[[image:image-20231031162854-1.png]]
483 483  
351 += **4. Build-in Server** =
484 484  
485 -=== 3.5.2 System ~-~-> System General ===
486 486  
354 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
487 487  
488 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
489 489  
490 -In addition, Users can customize the FallBack IP address.
357 +[[image:image-20220820115644-1.png||height="217" width="778"]]
491 491  
492 -[[image:image-20230214094058-3.png]]
493 493  
360 +(% style="color:red" %)**Note:**
494 494  
495 -=== 3.5.3 System ~-~-> Backup/Restore ===
362 + **Path**: System ~-~-> Built-in Server
496 496  
497 497  
498 -[[image:image-20231031162927-2.png]]
365 +**Troubleshooting:**
499 499  
500 500  
501 -=== 3.5.4 System ~-~-> Remoteit ===
368 +**~ 1. URL does not jump properly**
502 502  
370 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
503 503  
504 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
372 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
505 505  
506 506  
507 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
508 508  
509 -[[image:image-20221230092303-2.png]]
376 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
510 510  
511 511  
512 -=== 3.5.5 System ~-~-> Package Management ===
379 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
513 513  
381 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
514 514  
515 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
516 516  
517 -[[image:image-20230214094316-4.png]]
384 +Login account:
518 518  
386 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
519 519  
520 -= 4. Build-in Server =
388 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
521 521  
522 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
523 523  
391 +[[image:image-20220725171719-1.png||height="570" width="769"]]
524 524  
525 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
526 526  
527 -[[image:image-20231106180816-4.png||height="416" width="896"]]
528 528  
529 -[[image:image-20231201165904-1.png||height="466" width="899"]]
395 +== **4.2 Application Server ~-~- Node-Red** ==
530 530  
531 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
532 532  
533 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
398 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
534 534  
535 535  
401 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
536 536  
537 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
538 538  
404 +[[image:image-20220725172124-3.png||height="610" width="843"]]
539 539  
540 -[[image:image-20230616175558-7.png||height="362" width="894"]]
541 541  
542 -[[image:image-20231201170355-2.png||height="536" width="899"]]
543 543  
544 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
408 +=== **Using Node-Red, InfluxDB and Grafana,** ===
545 545  
410 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
546 546  
547 547  
548 -**Troubleshooting:**
413 +the users can refer to this link to install them.
549 549  
550 -**~ 1. If the URL does not jump properly.**
415 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
551 551  
552 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
553 553  
554 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
418 += **5. How users can access LPS8v2 using serial USB** =
555 555  
556 - **2. How to install InfluxDB, Garfana.**
557 557  
558 - The LPS8V2 is not pre-installed InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
421 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
559 559  
560 - **3. How to upgade the gateway node.js to the latest version.**
561 561  
562 - The user can upgrade nodejs, see [[Upgarde Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
424 +Port 1 of the UART on the LPS8v2 is GND
563 563  
564 -
565 -
566 -== 4.3 How to disable the built-in server ==
567 -
568 -
569 -Use the following commands to start and stop the TTNv3 service:
570 -
571 571  (% class="box infomessage" %)
572 572  (((
573 -**# start**
574 -systemctl start ttnstack
428 +**TXD  <~-~--> UART RXD (Gray line)**
575 575  
576 -**# stop**
577 -systemctl stop ttnstack
430 +**RXD  <~-~--> UART TXD (White line)**
578 578  
579 -**# enable**
580 -systemctl enable ttnstack
581 -
582 -**#disable**
583 -systemctl disable ttnstack
432 +**GND <~-~--> GND (Black line)**
584 584  )))
585 585  
586 -Use the following commands to start and stop the Node-Red service:
587 587  
588 -(% class="box infomessage" %)
589 -(((
590 -**# start**
591 -systemctl start nodered
436 +**LPS8v2 UART connection photo**
592 592  
593 -**# stop**
594 -systemctl stop nodered
438 +[[image:image-20220804163015-1.png||height="621" width="466"]]
595 595  
596 -**# enable**
597 -systemctl enable nodered
598 598  
599 -**#disable**
600 -systemctl disable nodered
601 -)))
602 602  
442 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
603 603  
604 -== 4.4 Why my gateway is not Chirpstack? ==
605 605  
445 +[[image:image-20220804164928-3.png||height="320" width="332"]]
606 606  
607 -The newly shipout LPS8v2 already have ChirpStack built-in by default. Older units might have built-in TTN Stack v3 server, in this case, user can change from TTN Stack v3 to ChirpStack by below instruction.
608 608  
609 -**[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
448 +[[image:image-20220804164747-2.png||height="622" width="594"]]
610 610  
611 611  
612 -=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
613 613  
452 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
614 614  
615 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
616 616  
617 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
455 +== **Step 1: Configure Frequency Band** ==
618 618  
619 -[[image:image-20230602140406-3.png||height="480" width="918"]]
620 620  
458 +//Each country has a requirement for frequency region. Choose the right one for your area.//
621 621  
622 -When the configuration is complete, click** "Save&Apply"**.
460 +[[image:image-20220905164308-1.png]]
623 623  
624 624  
625 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
626 626  
627 -[[image:image-20230602143122-4.png||height="511" width="983"]]
464 +== **Step 2: Configure the forward address** ==
628 628  
629 629  
630 -= 5. Watch Dog =
467 +**Select one of the servers to configure.**
631 631  
469 +**For example:**
632 632  
633 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
471 +[[image:image-20220905164847-2.png]]
634 634  
635 -The uses can be via the below method to enable Watch Dog:
636 636  
637 637  
638 -(% class="box infomessage" %)
639 -(((
640 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
641 -)))
475 +== **Step 3: Download and Install the Helium-gateway-rs** ==
642 642  
643 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
644 644  
478 +**Access the gateway CLI via SSH.**
645 645  
480 +[[image:image-20220905165222-3.png]]
646 646  
647 -= 6. How users can access LPS8-V2 using serial USB =
648 648  
483 +**Download gateway-rs.**
649 649  
650 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
485 +[[image:image-20220905165715-5.png]]
651 651  
652 -Port 1 of the UART on the LPS8-V2 is GND
653 -
654 654  (% class="box infomessage" %)
655 655  (((
656 -**TXD  <~-~--> UART RXD (Gray line)**
657 -
658 -**RXD  <~-~--> UART TXD (White line)**
659 -
660 -**GND <~-~--> GND (Black line)**
489 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
661 661  )))
662 662  
663 -**LPS8v2 UART connection photo**
664 664  
665 -[[image:image-20230421094319-2.png||height="351" width="392"]]
493 +**Install gateway-rs.**
666 666  
667 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
495 +[[image:image-20220905165917-7.png]]
668 668  
669 -
670 -[[image:image-20220804164928-3.png||height="320" width="332"]]
671 -
672 -
673 -[[image:image-20220804164747-2.png||height="622" width="594"]]
674 -
675 -
676 -= 7. OTA System Update =
677 -
678 -
679 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
680 -
681 -
682 -== 7.1 Auto-update method ==
683 -
684 -
685 -The default, each gateway will enable the auto-update function.
686 -
687 -this function will be triggered every boot and every midnight.
688 -
689 -
690 -Users can enable/disable it via Web Page
691 -
692 -[[image:image-20230607094447-2.png]]
693 -
694 -
695 -== 7.2 Manual upgrade method ==
696 -
697 -
698 -1). Using the Linux command to upgrade the system
699 -
700 -
701 701  (% class="box infomessage" %)
702 702  (((
703 -**apt update && apt install *dragino***
499 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
704 704  )))
705 705  
706 706  
707 -2). Upgrade the system via the Web page button of "Manual Update"
503 +**Modify configuration.**
708 708  
709 709  
710 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
506 +[[image:image-20220905173847-12.png]]
711 711  
712 -[[image:image-20230607093849-1.png]]
713 713  
714 -
715 -
716 -= 8. FAQ =
717 -
718 -== 8.1 How to change Hostname ==
719 -
720 -
721 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
722 -
723 723  (% class="box infomessage" %)
724 724  (((
725 -hostnamectl set-hostname dragino-123456
511 +**region=<Enter regional parameters> \
512 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
513 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
726 726  )))
727 727  
728 -[[image:image-20230517102429-1.png]]
729 729  
730 -After the configuration is complete, run "reboot" to restart the gateway.
517 +**Restart the helium_gateway**
731 731  
519 +[[image:image-20220905170920-9.png]]
732 732  
733 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
734 734  
735 -
736 -Migrate guide:
737 -
738 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
739 -
740 -**2. On the Server ~-~-> Network Server interface, click "Management"**
741 -
742 -[[image:image-20230616162454-1.png]]
743 -
744 -
745 -**3. Click "Migrate-Chirpstack"**
746 -
747 -[[image:image-20230616162742-2.png]]
748 -
749 -
750 -**4. Strat Install **
751 -
752 -Click start Install and wait until the migration succeeds
753 -
754 -[[image:image-20230616162934-3.png]]
755 -
756 -
757 -**5.Migration complete check result**
758 -
759 -[[image:image-20230616174526-4.png||height="706" width="983"]]
760 -
761 -
762 -[[image:image-20230616180004-9.png]]
763 -
764 -
765 -== 8.3 How to reduce the 4g data consumed ==
766 -
767 -
768 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
769 -
770 -[[image:image-20230719100239-1.png||height="724" width="994"]]
771 -
772 -
773 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
774 -
775 -[[image:image-20230719100332-2.png]]
776 -
777 -
778 -3. Disable the auto-update:
779 -
780 -[[image:image-20230719100419-3.png||height="458" width="995"]]
781 -
782 -
783 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
784 -
785 -
786 786  (% class="box infomessage" %)
787 787  (((
788 -apt update && apt install helium-gateway
524 +**systemctl restart helium_gateway**
789 789  )))
790 790  
791 791  
792 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
528 +**Check the helium_gateway Log：**
793 793  
530 +[[image:image-20220905173952-13.png]]
794 794  
795 -By default, the LPS8v2's built-in server is ChirpStack v4,
796 796  
797 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
798 -
799 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
800 -
801 -
802 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
803 -
804 -
805 -== 8.6 How do I view gateway logs ==
806 -
807 -=== 8.6.1 LoRaWAN Log: ===
808 -
809 -==== Semtech UDP Log : ====
810 -
811 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
812 -
813 -[[image:image-20231017112115-2.png||height="611" width="821"]]
814 -
815 -
816 -==== Station Log: ====
817 -
818 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
819 -
820 -[[image:image-20231017111606-1.png||height="622" width="821"]]
821 -
822 -
823 -=== 8.6.2  4G Log ===
824 -
825 -The user needs to access the Linux console of the gateway and enter the following command:
826 -
827 827  (% class="box infomessage" %)
828 828  (((
829 -cat /var/log/qmilog.txt
535 +**journalctl -u helium_gateway -f**
830 830  )))
831 831  
832 -[[image:image-20231017114417-3.png||height="543" width="679"]]
833 833  
834 -=== 8.6.3 Dmesg Log ===
539 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
835 835  
836 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
541 +where the helium gateway log is shown:
837 837  
838 -[[image:image-20231017115330-5.png||height="565" width="740"]]
543 +[[image:image-20220905174534-14.png]]
839 839  
840 840  
841 -=== 8.6.4 Record Log ===
546 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
842 842  
843 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
844 844  
845 -[[image:image-20231017115124-4.png||height="215" width="880"]]
846 846  
550 += **7. Trouble Shooting** =
847 847  
848 -= 9. Trouble Shooting =
849 849  
850 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
553 +== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
851 851  
852 852  
853 853  [[image:image-20220920135918-1.png]]
... ... @@ -865,87 +865,21 @@
865 865  [[image:image-20220920141936-2.png]]
866 866  
867 867  
868 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
869 869  
870 870  
871 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
573 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
872 872  
873 -[[image:image-20230508171607-1.png]]
874 874  
875 -
876 -== 9.3  Fallback IP does not work, how can users check ==
877 -
878 -
879 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
880 -
881 -
882 -**1.Check whether the configuration is correct**
883 -
884 -Run the CMD command to ipconfig and ping 172.31.255.254.
885 -
886 -If this fails, the user needs to reconfigure.
887 -
888 -[[image:image-20230413170224-3.png||height="433" width="707"]]
889 -
890 -[[image:image-20230413170246-4.png]]
891 -
892 -
893 -**2. Check whether the firewall is disabled**
894 -
895 -If the firewall is not down, this will affect access to the gateway.
896 -
897 -
898 -== 9.4  Click "Manual_Update", why there is no response? ==
899 -
900 -
901 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
902 -
903 -
904 -[[image:image-20230527090555-3.png||height="660" width="832"]]
905 -
906 -
907 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
908 -
909 -
910 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
911 -
912 -
913 -(% class="box infomessage" %)
914 914  (((
915 -apt update && apt install *dragino*
916 -
917 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
577 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
918 918  )))
919 919  
920 -
921 -== 9.6  How to reset the built-in server ==
922 -
923 -
924 -**1) Build-in The Things Network**
925 -
926 -Refer to this link to delete the Built-in server's device.
927 -
928 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
929 -
930 -
931 -**2) Build-in Chirpstack**
932 -
933 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
934 -
935 -[[image:image-20231106180846-5.png||height="310" width="668"]]
936 -
937 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
938 -
939 -
940 940  (((
941 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
942 -)))
581 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
943 943  
944 -(((
945 -With your question as detailed as possible. We will reply and help you in the shortest.
946 946  
947 947  
948 -= 11. Reference =
585 += **9. Reference** =
949 949  
950 950  
951 951  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -954,7 +954,7 @@
954 954  
955 955  )))
956 956  
957 -= 12. Order Info =
594 += **10. Order Info** =
958 958  
959 959  
960 960  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -962,33 +962,26 @@
962 962  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
963 963  
964 964  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
965 -
966 966  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
967 -
968 968  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
969 -
970 970  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
971 -
972 972  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
973 -
974 974  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
975 975  
976 976  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
977 977  
978 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
610 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
611 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
612 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
613 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
979 979  
980 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
981 -
982 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
983 -
984 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
985 -
986 986  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
987 987  
988 988  
989 -= 13. Manufacturer Info =
990 990  
619 += **10. Manufacturer Info** =
991 991  
621 +
992 992  **Shenzhen Dragino Technology Development co. LTD**
993 993  
994 994  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -996,9 +996,10 @@
996 996  LongCheng Street, LongGang District ; Shenzhen 518116,China
997 997  
998 998  
999 -= 14. FCC Warning =
1000 1000  
630 += **11. FCC Warning** =
1001 1001  
632 +
1002 1002  (((
1003 1003  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1004 1004  )))
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0