Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 274.1 >
edited by Kilight Cao
on 2023/11/29 11:10
To version < 205.2 >
edited by Xiaoling
on 2023/05/27 14:38
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -81,31 +81,35 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
87 +== 1.4 Block Diagram ==
88 88  
89 89  
90 +
91 +== 1.5 LED Indicators ==
92 +
93 +
90 90  LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
97 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
99 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
101 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
107 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
109 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
106 106  
107 107  
108 -== 1.5 Button Intruction ==
112 +== 1.6 Button Intruction ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -113,19 +113,14 @@
113 113  
114 114  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
120 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
123 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
125 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 129  = 2. Quick Start =
130 130  
131 131  
... ... @@ -134,9 +134,9 @@
134 134  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
135 135  
136 136  
137 -== 2.1 Access and Configure LPS8-V2 ==
136 +== 2.1 Connects to the network and accesses the gateway Web UI ==
138 138  
139 -=== 2.1.1 Find IP address of LPS8-V2 ===
138 +=== 2.1.1 connect the network ===
140 140  
141 141  
142 142  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -144,7 +144,7 @@
144 144  
145 145  Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
146 146  
147 -(% style="background-color:yellow" %)**dragino+dragino**
146 + (% style="background-color:yellow" %)**dragino+dragino**
148 148  
149 149  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
150 150  
... ... @@ -153,7 +153,9 @@
153 153  [[image:image-20230527085250-2.png||height="495" width="284"]]
154 154  
155 155  
155 +If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
156 156  
157 +
157 157  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
158 158  
159 159  
... ... @@ -182,7 +182,7 @@
182 182  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
183 183  
184 184  
185 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
186 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
186 186  
187 187  
188 188  As in the below photo:
... ... @@ -192,7 +192,7 @@
192 192  
193 193  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
194 194  
195 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
196 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
196 196  
197 197  
198 198  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -236,9 +236,9 @@
236 236  
237 237  The account details for Web Login are:
238 238  
239 -(% style="color:blue" %)**User Name: root**
240 +(% style="color:#4f81bd" %)**User Name: root**
240 240  
241 -(% style="color:blue" %)**Password:   dragino**
242 +(% style="color:#4f81bd" %)**Password:   dragino**
242 242  
243 243  [[image:image-20230106153501-1.png||height="367" width="894"]]
244 244  
... ... @@ -251,9 +251,7 @@
251 251  LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
252 252  
253 253  * **WAN Port Internet Mode**
254 -
255 255  * **WiFi Client Mode**
256 -
257 257  * **Cellular Mode**
258 258  
259 259  === 2.2.2  Use WAN port to access Internet ===
... ... @@ -305,7 +305,6 @@
305 305  
306 306  === 2.2.5  Check Internet connection ===
307 307  
308 -
309 309  In the **home** page, we can check the Internet connection.
310 310  
311 311  * GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
... ... @@ -374,7 +374,7 @@
374 374  == 3.1 Home ==
375 375  
376 376  
377 -Shows the system running status:
375 +//Shows the system running status~://
378 378  
379 379  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
380 380  
... ... @@ -384,15 +384,15 @@
384 384  === 3.2.1 LoRa ~-~-> LoRa ===
385 385  
386 386  
387 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
385 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
388 388  
389 -Different LPS8v2 hardware versions can support different frequency ranges:
387 +//Different LPS8v2 hardware versions can support different frequency ranges~://
390 390  
391 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
392 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
389 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
390 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
393 393  
394 394  (% class="wikigeneratedid" %)
395 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
393 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
396 396  
397 397  
398 398  (% class="wikigeneratedid" %)
... ... @@ -409,7 +409,7 @@
409 409  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
410 410  
411 411  
412 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
410 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
413 413  
414 414  
415 415  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -418,7 +418,7 @@
418 418  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
419 419  
420 420  
421 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
419 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
422 422  
423 423  
424 424  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -433,9 +433,8 @@
433 433  
434 434  === 3.4.1 Network ~-~-> WiFi ===
435 435  
436 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
437 437  
438 -[[image:image-20230619095946-1.png||height="332" width="827"]]
435 +[[image:image-20220616114756-4.png||height="251" width="669"]]
439 439  
440 440  
441 441  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -447,7 +447,7 @@
447 447  === 3.4.3 Network ~-~-> Network ===
448 448  
449 449  
450 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
447 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
451 451  
452 452  [[image:image-20230214093657-2.png||height="333" width="858"]]
453 453  
... ... @@ -455,7 +455,7 @@
455 455  === 3.4.4 Network ~-~-> Cellular ===
456 456  
457 457  
458 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
455 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
459 459  
460 460  (% style="color:red" %)**Note: APN cannot be empty.**
461 461  
... ... @@ -462,16 +462,11 @@
462 462  [[image:image-20230228115126-1.png]]
463 463  
464 464  
465 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
462 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
466 466  
467 467  [[image:image-20230228115535-2.png||height="478" width="888"]]
468 468  
469 469  
470 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
471 -
472 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
473 -
474 -
475 475  == 3.5 System ==
476 476  
477 477  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -479,13 +479,13 @@
479 479  
480 480  Shows the system info:
481 481  
482 -[[image:image-20231031162854-1.png]]
474 +[[image:image-20220917144512-5.png||height="618" width="853"]]
483 483  
484 484  
485 485  === 3.5.2 System ~-~-> System General ===
486 486  
487 487  
488 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
480 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
489 489  
490 490  In addition, Users can customize the FallBack IP address.
491 491  
... ... @@ -495,13 +495,13 @@
495 495  === 3.5.3 System ~-~-> Backup/Restore ===
496 496  
497 497  
498 -[[image:image-20231031162927-2.png]]
490 +[[image:image-20220917144725-6.png||height="208" width="869"]]
499 499  
500 500  
501 501  === 3.5.4 System ~-~-> Remoteit ===
502 502  
503 503  
504 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
496 +In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
505 505  
506 506  
507 507  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -512,7 +512,7 @@
512 512  === 3.5.5 System ~-~-> Package Management ===
513 513  
514 514  
515 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
507 +In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
516 516  
517 517  [[image:image-20230214094316-4.png]]
518 518  
... ... @@ -520,35 +520,31 @@
520 520  = 4. Build-in Server =
521 521  
522 522  
523 -Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
515 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
524 524  
525 -[[image:image-20231106180816-4.png||height="416" width="896"]]
526 526  
527 -[[image:image-20230616175558-7.png||height="362" width="894"]]
518 +[[image:image-20230214095318-5.png||height="347" width="980"]]
528 528  
529 529  
530 -
531 531  (% style="color:red" %)**Note:**
532 532  
533 - **Path**: Server ~-~-> Network Server
523 + **Path**: System ~-~-> Built-in Server
534 534  
535 - Server ~-~-> Application Server
536 536  
537 -
538 538  **Troubleshooting:**
539 539  
540 540  
541 541  **~ 1. URL does not jump properly**
542 542  
543 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
531 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
544 544  
545 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
533 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
546 546  
547 547  
548 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
536 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
549 549  
550 550  
551 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
539 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
552 552  
553 553  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
554 554  
... ... @@ -555,15 +555,15 @@
555 555  
556 556  Login account:
557 557  
558 -**Username : ** (% style="background-color:yellow" %)**admin**
546 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
559 559  
560 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
548 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
561 561  
562 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
563 563  
551 +[[image:image-20220725171719-1.png||height="570" width="769"]]
564 564  
565 565  
566 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
554 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
567 567  
568 568  
569 569  Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
... ... @@ -647,51 +647,23 @@
647 647  == 4.4 How to use ChirpStack on LPS8-V2 ==
648 648  
649 649  
650 -The newly shipout LPS8v2 already have ChirpStack built-in by default. Older units might have built-in TTN Stack v3 server, in this case, user can change from TTN Stack v3 to ChirpStack by below instruction.
638 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
651 651  
652 -**[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
640 +[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
653 653  
642 +[[image:image-20230222094908-1.png||height="133" width="798"]]
654 654  
655 -=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
656 656  
645 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
657 657  
658 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
659 659  
660 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
661 661  
662 -[[image:image-20230602140406-3.png||height="480" width="918"]]
663 -
664 -
665 -When the configuration is complete, click** "Save&Apply"**.
666 -
667 -
668 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
669 -
670 -[[image:image-20230602143122-4.png||height="511" width="983"]]
671 -
672 -
673 -= 5. Watch Dog =
674 -
675 -
676 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
677 -
678 -The uses can be via the below method to enable Watch Dog:
679 -
680 -
681 -(% class="box infomessage" %)
682 -(((
683 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
684 -)))
685 -
686 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
687 -
688 -
689 -
690 690  = 6. How users can access LPS8-V2 using serial USB =
691 691  
692 692  
693 693  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
694 694  
654 +
695 695  Port 1 of the UART on the LPS8-V2 is GND
696 696  
697 697  (% class="box infomessage" %)
... ... @@ -703,8 +703,10 @@
703 703  **GND <~-~--> GND (Black line)**
704 704  )))
705 705  
666 +
706 706  **LPS8v2 UART connection photo**
707 707  
669 +
708 708  [[image:image-20230421094319-2.png||height="351" width="392"]]
709 709  
710 710  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -716,183 +716,138 @@
716 716  [[image:image-20220804164747-2.png||height="622" width="594"]]
717 717  
718 718  
719 -= 7. OTA System Update =
681 += 7. Use the helium gateway-rs as the Data-only Hotspot =
720 720  
721 721  
722 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
684 +== **Step 1: Configure Frequency Band** ==
723 723  
724 724  
725 -== 7.1 Auto-update method ==
687 +//Each country has a requirement for frequency region. Choose the right one for your area.//
726 726  
689 +[[image:image-20220905164308-1.png]]
727 727  
728 -The default, each gateway will enable the auto-update function.
729 729  
730 -this function will be triggered every boot and every midnight.
731 731  
693 +== **Step 2: Configure the forward address** ==
732 732  
733 -Users can enable/disable it via Web Page
734 734  
735 -[[image:image-20230607094447-2.png]]
696 +**Select one of the servers to configure.**
736 736  
698 +**For example:**
737 737  
738 -== 7.2 Manual upgrade method ==
700 +[[image:image-20220905164847-2.png]]
739 739  
740 740  
741 -1). Using the Linux command to upgrade the system
742 742  
704 +== **Step 3: Download and Install the Helium-gateway-rs** ==
743 743  
744 -(% class="box infomessage" %)
745 -(((
746 -**apt update && apt install *dragino***
747 -)))
748 748  
707 +**Access the gateway CLI via SSH.**
749 749  
750 -2). Upgrade the system via the Web page button of "Manual Update"
709 +[[image:image-20230425153417-2.png]]
751 751  
752 752  
753 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
712 +**Install the new gateway-rs**
754 754  
755 -[[image:image-20230607093849-1.png]]
714 +(% class="box infomessage" %)
715 +(((
716 +**apt update && apt install helium-gateway**
717 +)))
756 756  
719 +[[image:image-20230425154058-4.png]]
757 757  
758 758  
759 -= 8. FAQ =
760 760  
761 -== 8.1 How to change Hostname ==
723 +Option: If you installed the older gateway-rs, you have clean it
762 762  
763 -
764 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
765 -
766 766  (% class="box infomessage" %)
767 767  (((
768 -hostnamectl set-hostname dragino-123456
727 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
769 769  )))
770 770  
771 -[[image:image-20230517102429-1.png]]
730 +[[image:image-20230425153823-3.png]]
772 772  
773 -After the configuration is complete, run "reboot" to restart the gateway.
774 774  
733 +**Change the region setting:**
775 775  
776 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
777 777  
736 +(% class="box infomessage" %)
737 +(((
738 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
778 778  
779 -Migrate guide:
780 780  
781 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
741 +**e.g: **
782 782  
783 -**2. On the Server ~-~-> Network Server interface, click "Management"**
743 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
784 784  
785 -[[image:image-20230616162454-1.png]]
745 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
746 +)))
786 786  
787 787  
788 -**3. Click "Migrate-Chirpstack"**
749 +**Restart the gateway-rs**
789 789  
790 -[[image:image-20230616162742-2.png]]
751 +(% class="box infomessage" %)
752 +(((
753 +**systemctl restart helium_gateway**
754 +)))
791 791  
756 +[[image:image-20230425155612-7.png||height="265" width="911"]]
792 792  
793 -**4. Strat Install **
794 794  
795 -Click start Install and wait until the migration succeeds
796 796  
797 -[[image:image-20230616162934-3.png]]
760 +**Check the helium_gateway running status**
798 798  
799 799  
800 -**5.Migration complete check result**
763 +(% class="box infomessage" %)
764 +(((
765 +**systemctl status helium_gateway**
766 +)))
801 801  
802 -[[image:image-20230616174526-4.png||height="706" width="983"]]
803 803  
769 +[[image:image-20230425154740-5.png]]
804 804  
805 -[[image:image-20230616180004-9.png]]
806 806  
807 807  
808 -== 8.3 How to reduce the 4g data consumed ==
773 +**Check the helium_gateway Log：**
809 809  
810 -
811 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
812 -
813 -[[image:image-20230719100239-1.png||height="724" width="994"]]
814 -
815 -
816 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
817 -
818 -[[image:image-20230719100332-2.png]]
819 -
820 -
821 -3. Disable the auto-update:
822 -
823 -[[image:image-20230719100419-3.png||height="458" width="995"]]
824 -
825 -
826 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
827 -
828 -
829 829  (% class="box infomessage" %)
830 830  (((
831 -apt update && apt install helium-gateway
777 +**journalctl -u helium_gateway -f**
832 832  )))
833 833  
834 834  
835 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
781 +[[image:image-20230425155659-8.png]]
836 836  
837 837  
838 -By default, the LPS8v2's built-in server is ChirpStack v4,
784 += 8. OTA System Update =
839 839  
840 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
841 841  
842 -[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
787 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
843 843  
844 844  
845 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
846 846  
791 += 9. FAQ =
847 847  
848 -== 8.6 How do I view gateway logs ==
793 +== 9.1 How to change Hostname ==
849 849  
850 -=== 8.6.1 LoRaWAN Log: ===
851 851  
852 -==== Semtech UDP Log : ====
796 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
853 853  
854 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
855 -
856 -[[image:image-20231017112115-2.png||height="611" width="821"]]
857 -
858 -
859 -==== Station Log: ====
860 -
861 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
862 -
863 -[[image:image-20231017111606-1.png||height="622" width="821"]]
864 -
865 -
866 -=== 8.6.2  4G Log ===
867 -
868 -The user needs to access the Linux console of the gateway and enter the following command:
869 -
870 870  (% class="box infomessage" %)
871 871  (((
872 -cat /var/log/qmilog.txt
800 +hostnamectl set-hostname dragino-123456
873 873  )))
874 874  
875 -[[image:image-20231017114417-3.png||height="543" width="679"]]
803 +[[image:image-20230517102429-1.png]]
876 876  
877 -=== 8.6.3 Dmesg Log ===
805 +After the configuration is complete, run "reboot" to restart the gateway.
878 878  
879 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
880 880  
881 -[[image:image-20231017115330-5.png||height="565" width="740"]]
808 += 10. Trouble Shooting =
882 882  
810 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
883 883  
884 -=== 8.6.4 Record Log ===
885 885  
886 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
887 -
888 -[[image:image-20231017115124-4.png||height="215" width="880"]]
889 -
890 -
891 -= 9. Trouble Shooting =
892 -
893 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
894 -
895 -
896 896  [[image:image-20220920135918-1.png]]
897 897  
898 898  
... ... @@ -908,15 +908,14 @@
908 908  [[image:image-20220920141936-2.png]]
909 909  
910 910  
911 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
828 +== 10.2 The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
912 912  
913 -
914 914  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
915 915  
916 916  [[image:image-20230508171607-1.png]]
917 917  
918 918  
919 -== 9.3  Fallback IP does not work, how can users check ==
835 +== 10.3  Fallback IP does not work, how can users check ==
920 920  
921 921  
922 922  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
... ... @@ -938,7 +938,7 @@
938 938  If the firewall is not down, this will affect access to the gateway.
939 939  
940 940  
941 -== 9.4  Click "Manual_Update", why there is no response? ==
857 +== 10.4  Click "Manual_Update", why there is no response? ==
942 942  
943 943  
944 944  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -946,51 +946,20 @@
946 946  
947 947  [[image:image-20230527090555-3.png||height="660" width="832"]]
948 948  
865 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
949 949  
950 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
951 951  
952 -
953 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
954 -
955 -
956 -(% class="box infomessage" %)
957 957  (((
958 -apt update && apt install *dragino*
959 -
960 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
869 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
961 961  )))
962 962  
963 -
964 -== 9.6  How to reset the built-in server ==
965 -
966 -
967 -**1) Build-in The Things Network**
968 -
969 -Refer to this link to delete the Built-in server's device.
970 -
971 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
972 -
973 -
974 -**2) Build-in Chirpstack**
975 -
976 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
977 -
978 -[[image:image-20231106180846-5.png||height="310" width="668"]]
979 -
980 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
981 -
982 -
983 983  (((
984 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
985 -)))
873 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
986 986  
987 -(((
988 -With your question as detailed as possible. We will reply and help you in the shortest.
989 989  
876 += 12. Reference =
990 990  
991 -= 11. Reference =
992 992  
993 -
994 994  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
995 995  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
996 996  
... ... @@ -997,7 +997,7 @@
997 997  
998 998  )))
999 999  
1000 -= 12. Order Info =
885 += 13. Order Info =
1001 1001  
1002 1002  
1003 1003  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1005,31 +1005,23 @@
1005 1005  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
1006 1006  
1007 1007  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1008 -
1009 1009  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1010 -
1011 1011  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1012 -
1013 1013  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1014 -
1015 1015  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1016 -
1017 1017  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1018 1018  
1019 1019  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
1020 1020  
1021 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
901 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
902 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
903 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
904 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1022 1022  
1023 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1024 -
1025 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1026 -
1027 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1028 -
1029 1029  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1030 1030  
1031 1031  
1032 -= 13. Manufacturer Info =
909 += 14. Manufacturer Info =
1033 1033  
1034 1034  
1035 1035  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1039,7 +1039,7 @@
1039 1039  LongCheng Street, LongGang District ; Shenzhen 518116,China
1040 1040  
1041 1041  
1042 -= 14. FCC Warning =
919 += 15. FCC Warning =
1043 1043  
1044 1044  
1045 1045  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0