Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 273.1 >
edited by Xiaoye
on 2023/11/24 11:33
To version < 212.1 >
edited by Kilight Cao
on 2023/06/05 09:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -81,12 +81,16 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
87 +== 1.4 Block Diagram ==
88 88  
89 89  
90 +
91 +== 1.5 LED Indicators ==
92 +
93 +
90 90  LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
... ... @@ -105,7 +105,7 @@
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
107 107  
108 -== 1.5 Button Intruction ==
112 +== 1.6 Button Intruction ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -113,19 +113,14 @@
113 113  
114 114  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
120 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
123 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
125 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
122 122  
123 123  
124 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 -
126 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 -
128 -
129 129  = 2. Quick Start =
130 130  
131 131  
... ... @@ -134,9 +134,9 @@
134 134  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
135 135  
136 136  
137 -== 2.1 Access and Configure LPS8-V2 ==
136 +== 2.1 Connects to the network and accesses the gateway Web UI ==
138 138  
139 -=== 2.1.1 Find IP address of LPS8-V2 ===
138 +=== 2.1.1 connect the network ===
140 140  
141 141  
142 142  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -144,7 +144,7 @@
144 144  
145 145  Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
146 146  
147 -(% style="background-color:yellow" %)**dragino+dragino**
146 + (% style="background-color:yellow" %)**dragino+dragino**
148 148  
149 149  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
150 150  
... ... @@ -182,7 +182,7 @@
182 182  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
183 183  
184 184  
185 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
184 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
186 186  
187 187  
188 188  As in the below photo:
... ... @@ -192,7 +192,7 @@
192 192  
193 193  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
194 194  
195 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
194 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
196 196  
197 197  
198 198  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -305,7 +305,6 @@
305 305  
306 306  === 2.2.5  Check Internet connection ===
307 307  
308 -
309 309  In the **home** page, we can check the Internet connection.
310 310  
311 311  * GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
... ... @@ -433,9 +433,8 @@
433 433  
434 434  === 3.4.1 Network ~-~-> WiFi ===
435 435  
436 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
437 437  
438 -[[image:image-20230619095946-1.png||height="332" width="827"]]
435 +[[image:image-20220616114756-4.png||height="251" width="669"]]
439 439  
440 440  
441 441  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -447,7 +447,7 @@
447 447  === 3.4.3 Network ~-~-> Network ===
448 448  
449 449  
450 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
447 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
451 451  
452 452  [[image:image-20230214093657-2.png||height="333" width="858"]]
453 453  
... ... @@ -455,7 +455,7 @@
455 455  === 3.4.4 Network ~-~-> Cellular ===
456 456  
457 457  
458 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
455 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
459 459  
460 460  (% style="color:red" %)**Note: APN cannot be empty.**
461 461  
... ... @@ -462,16 +462,11 @@
462 462  [[image:image-20230228115126-1.png]]
463 463  
464 464  
465 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
462 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
466 466  
467 467  [[image:image-20230228115535-2.png||height="478" width="888"]]
468 468  
469 469  
470 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
471 -
472 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
473 -
474 -
475 475  == 3.5 System ==
476 476  
477 477  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -479,13 +479,13 @@
479 479  
480 480  Shows the system info:
481 481  
482 -[[image:image-20231031162854-1.png]]
474 +[[image:image-20220917144512-5.png||height="618" width="853"]]
483 483  
484 484  
485 485  === 3.5.2 System ~-~-> System General ===
486 486  
487 487  
488 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
480 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
489 489  
490 490  In addition, Users can customize the FallBack IP address.
491 491  
... ... @@ -495,7 +495,7 @@
495 495  === 3.5.3 System ~-~-> Backup/Restore ===
496 496  
497 497  
498 -[[image:image-20231031162927-2.png]]
490 +[[image:image-20220917144725-6.png||height="208" width="869"]]
499 499  
500 500  
501 501  === 3.5.4 System ~-~-> Remoteit ===
... ... @@ -520,35 +520,31 @@
520 520  = 4. Build-in Server =
521 521  
522 522  
523 -Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
515 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
524 524  
525 -[[image:image-20231106180816-4.png||height="416" width="896"]]
526 526  
527 -[[image:image-20230616175558-7.png||height="362" width="894"]]
518 +[[image:image-20230214095318-5.png||height="347" width="980"]]
528 528  
529 529  
530 -
531 531  (% style="color:red" %)**Note:**
532 532  
533 - **Path**: Server ~-~-> Network Server
523 + **Path**: System ~-~-> Built-in Server
534 534  
535 - Server ~-~-> Application Server
536 536  
537 -
538 538  **Troubleshooting:**
539 539  
540 540  
541 541  **~ 1. URL does not jump properly**
542 542  
543 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
531 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
544 544  
545 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
533 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
546 546  
547 547  
548 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
536 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
549 549  
550 550  
551 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
539 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
552 552  
553 553  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
554 554  
... ... @@ -555,15 +555,15 @@
555 555  
556 556  Login account:
557 557  
558 -**Username : ** (% style="background-color:yellow" %)**admin**
546 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
559 559  
560 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
548 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
561 561  
562 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
563 563  
551 +[[image:image-20220725171719-1.png||height="570" width="769"]]
564 564  
565 565  
566 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
554 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
567 567  
568 568  
569 569  Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
... ... @@ -647,51 +647,37 @@
647 647  == 4.4 How to use ChirpStack on LPS8-V2 ==
648 648  
649 649  
650 -The newly shipout LPS8v2 already have ChirpStack built-in by default. Older units might have built-in TTN Stack v3 server, in this case, user can change from TTN Stack v3 to ChirpStack by below instruction.
638 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
651 651  
652 -**[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
640 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
653 653  
654 654  
655 -=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
643 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
656 656  
657 657  
658 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
646 +On the Server ~-~-> Network Server interface, choose the frequency Plan first.
659 659  
660 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
648 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
661 661  
662 662  [[image:image-20230602140406-3.png||height="480" width="918"]]
663 663  
664 664  
665 -When the configuration is complete, click** "Save&Apply"**.
653 +When the configuration is complete, click "Save&Apply".
666 666  
667 -
668 668  (% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
669 669  
670 670  [[image:image-20230602143122-4.png||height="511" width="983"]]
671 671  
659 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
672 672  
673 -= 5. Watch Dog =
674 674  
675 675  
676 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
677 -
678 -The uses can be via the below method to enable Watch Dog:
679 -
680 -
681 -(% class="box infomessage" %)
682 -(((
683 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
684 -)))
685 -
686 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
687 -
688 -
689 -
690 690  = 6. How users can access LPS8-V2 using serial USB =
691 691  
692 692  
693 693  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
694 694  
668 +
695 695  Port 1 of the UART on the LPS8-V2 is GND
696 696  
697 697  (% class="box infomessage" %)
... ... @@ -703,8 +703,10 @@
703 703  **GND <~-~--> GND (Black line)**
704 704  )))
705 705  
680 +
706 706  **LPS8v2 UART connection photo**
707 707  
683 +
708 708  [[image:image-20230421094319-2.png||height="351" width="392"]]
709 709  
710 710  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -716,183 +716,160 @@
716 716  [[image:image-20220804164747-2.png||height="622" width="594"]]
717 717  
718 718  
719 -= 7. OTA System Update =
695 += 7. Use the helium gateway-rs as the Data-only Hotspot =
720 720  
721 721  
722 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
698 +== **Step 1: Configure Frequency Band** ==
723 723  
724 724  
725 -== 7.1 Auto-update method ==
701 +//Each country has a requirement for frequency region. Choose the right one for your area.//
726 726  
703 +[[image:image-20220905164308-1.png]]
727 727  
728 -The default, each gateway will enable the auto-update function.
729 729  
730 -this function will be triggered every boot and every midnight.
731 731  
707 +== **Step 2: Configure the forward address** ==
732 732  
733 -Users can enable/disable it via Web Page
734 734  
735 -[[image:image-20230607094447-2.png]]
710 +**Select one of the servers to configure.**
736 736  
712 +**For example:**
737 737  
738 -== 7.2 Manual upgrade method ==
714 +[[image:image-20220905164847-2.png]]
739 739  
740 740  
741 -1). Using the Linux command to upgrade the system
742 742  
718 +== **Step 3: Download and Install the Helium-gateway-rs** ==
743 743  
744 -(% class="box infomessage" %)
745 -(((
746 -**apt update && apt install *dragino***
747 -)))
748 748  
721 +**Access the gateway CLI via SSH.**
749 749  
750 -2). Upgrade the system via the Web page button of "Manual Update"
723 +[[image:image-20230425153417-2.png]]
751 751  
752 752  
753 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
726 +**Install the new gateway-rs**
754 754  
755 -[[image:image-20230607093849-1.png]]
728 +(% class="box infomessage" %)
729 +(((
730 +**apt update && apt install helium-gateway**
731 +)))
756 756  
733 +[[image:image-20230425154058-4.png]]
757 757  
758 758  
759 -= 8. FAQ =
760 760  
761 -== 8.1 How to change Hostname ==
737 +Option: If you installed the older gateway-rs, you have clean it
762 762  
763 -
764 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
765 -
766 766  (% class="box infomessage" %)
767 767  (((
768 -hostnamectl set-hostname dragino-123456
741 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
769 769  )))
770 770  
771 -[[image:image-20230517102429-1.png]]
744 +[[image:image-20230425153823-3.png]]
772 772  
773 -After the configuration is complete, run "reboot" to restart the gateway.
774 774  
747 +**Change the region setting:**
775 775  
776 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
777 777  
750 +(% class="box infomessage" %)
751 +(((
752 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
778 778  
779 -Migrate guide:
780 780  
781 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
755 +**e.g: **
782 782  
783 -**2. On the Server ~-~-> Network Server interface, click "Management"**
757 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
784 784  
785 -[[image:image-20230616162454-1.png]]
759 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
760 +)))
786 786  
787 787  
788 -**3. Click "Migrate-Chirpstack"**
763 +**Restart the gateway-rs**
789 789  
790 -[[image:image-20230616162742-2.png]]
765 +(% class="box infomessage" %)
766 +(((
767 +**systemctl restart helium_gateway**
768 +)))
791 791  
770 +[[image:image-20230425155612-7.png||height="265" width="911"]]
792 792  
793 -**4. Strat Install **
794 794  
795 -Click start Install and wait until the migration succeeds
796 796  
797 -[[image:image-20230616162934-3.png]]
774 +**Check the helium_gateway running status**
798 798  
799 799  
800 -**5.Migration complete check result**
777 +(% class="box infomessage" %)
778 +(((
779 +**systemctl status helium_gateway**
780 +)))
801 801  
802 -[[image:image-20230616174526-4.png||height="706" width="983"]]
803 803  
783 +[[image:image-20230425154740-5.png]]
804 804  
805 -[[image:image-20230616180004-9.png]]
806 806  
807 807  
808 -== 8.3 How to reduce the 4g data consumed ==
787 +**Check the helium_gateway Log：**
809 809  
789 +(% class="box infomessage" %)
790 +(((
791 +**journalctl -u helium_gateway -f**
792 +)))
810 810  
811 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
812 812  
813 -[[image:image-20230719100239-1.png||height="724" width="994"]]
795 +[[image:image-20230425155659-8.png]]
814 814  
815 815  
816 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
798 += 8. OTA System Update =
817 817  
818 -[[image:image-20230719100332-2.png]]
819 819  
801 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
820 820  
821 -3. Disable the auto-update:
822 822  
823 -[[image:image-20230719100419-3.png||height="458" width="995"]]
804 += 9. FAQ =
824 824  
806 +== 9.1 How to change Hostname ==
825 825  
826 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
827 827  
809 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
828 828  
829 829  (% class="box infomessage" %)
830 830  (((
831 -apt update && apt install helium-gateway
813 +hostnamectl set-hostname dragino-123456
832 832  )))
833 833  
816 +[[image:image-20230517102429-1.png]]
834 834  
835 -== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
818 +After the configuration is complete, run "reboot" to restart the gateway.
836 836  
837 837  
838 -By default, the LPS8v2's built-in server is ChirpStack v4,
821 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
839 839  
840 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
841 841  
842 -[[http:~~/~~/repo.dragino.com/release/hp0c-image/draginolps8v2-release-v1.7-230508.rar>>http://repo.dragino.com/release/hp0c-image/draginolps8v2-release-v1.7-230508.rar]]
824 +Migrate guide:
843 843  
826 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
844 844  
845 -Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
828 +2. Download migrate script and run it.
846 846  
847 -
848 -== 8.6 How do I view gateway logs ==
849 -
850 -=== 8.6.1 LoRaWAN Log: ===
851 -
852 -==== Semtech UDP Log : ====
853 -
854 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
855 -
856 -[[image:image-20231017112115-2.png||height="611" width="821"]]
857 -
858 -
859 -==== Station Log: ====
860 -
861 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
862 -
863 -[[image:image-20231017111606-1.png||height="622" width="821"]]
864 -
865 -
866 -=== 8.6.2  4G Log ===
867 -
868 -The user needs to access the Linux console of the gateway and enter the following command:
869 -
870 870  (% class="box infomessage" %)
871 871  (((
872 -cat /var/log/qmilog.txt
832 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
873 873  )))
874 874  
875 -[[image:image-20231017114417-3.png||height="543" width="679"]]
835 +[[image:image-20230602135658-1.png||height="545" width="986"]]
876 876  
877 -=== 8.6.3 Dmesg Log ===
837 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
878 878  
879 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
839 +[[image:image-20230602135825-2.png||height="356" width="855"]]
880 880  
881 -[[image:image-20231017115330-5.png||height="565" width="740"]]
841 +The default account for chirpstack is: **admin/admin**
882 882  
883 883  
884 -=== 8.6.4 Record Log ===
844 += 10. Trouble Shooting =
885 885  
886 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
846 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
887 887  
888 -[[image:image-20231017115124-4.png||height="215" width="880"]]
889 889  
890 -
891 -= 9. Trouble Shooting =
892 -
893 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
894 -
895 -
896 896  [[image:image-20220920135918-1.png]]
897 897  
898 898  
... ... @@ -908,7 +908,7 @@
908 908  [[image:image-20220920141936-2.png]]
909 909  
910 910  
911 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
864 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
912 912  
913 913  
914 914  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -916,7 +916,7 @@
916 916  [[image:image-20230508171607-1.png]]
917 917  
918 918  
919 -== 9.3  Fallback IP does not work, how can users check ==
872 +== 10.3  Fallback IP does not work, how can users check ==
920 920  
921 921  
922 922  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
... ... @@ -938,7 +938,7 @@
938 938  If the firewall is not down, this will affect access to the gateway.
939 939  
940 940  
941 -== 9.4  Click "Manual_Update", why there is no response? ==
894 +== 10.4  Click "Manual_Update", why there is no response? ==
942 942  
943 943  
944 944  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -947,40 +947,10 @@
947 947  [[image:image-20230527090555-3.png||height="660" width="832"]]
948 948  
949 949  
950 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
903 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
951 951  
952 952  
953 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
954 -
955 -
956 -(% class="box infomessage" %)
957 957  (((
958 -apt update && apt install *dragino*
959 -
960 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
961 -)))
962 -
963 -
964 -== 9.6  How to reset the built-in server ==
965 -
966 -
967 -**1) Build-in The Things Network**
968 -
969 -Refer to this link to delete the Built-in server's device.
970 -
971 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
972 -
973 -
974 -**2) Build-in Chirpstack**
975 -
976 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
977 -
978 -[[image:image-20231106180846-5.png||height="310" width="668"]]
979 -
980 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
981 -
982 -
983 -(((
984 984  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
985 985  )))
986 986  
... ... @@ -988,7 +988,7 @@
988 988  With your question as detailed as possible. We will reply and help you in the shortest.
989 989  
990 990  
991 -= 11. Reference =
914 += 12. Reference =
992 992  
993 993  
994 994  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -997,7 +997,7 @@
997 997  
998 998  )))
999 999  
1000 -= 12. Order Info =
923 += 13. Order Info =
1001 1001  
1002 1002  
1003 1003  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1005,31 +1005,23 @@
1005 1005  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
1006 1006  
1007 1007  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1008 -
1009 1009  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1010 -
1011 1011  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1012 -
1013 1013  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1014 -
1015 1015  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1016 -
1017 1017  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1018 1018  
1019 1019  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
1020 1020  
1021 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
939 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
940 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
941 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
942 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1022 1022  
1023 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1024 -
1025 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1026 -
1027 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1028 -
1029 1029  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1030 1030  
1031 1031  
1032 -= 13. Manufacturer Info =
947 += 14. Manufacturer Info =
1033 1033  
1034 1034  
1035 1035  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1039,7 +1039,7 @@
1039 1039  LongCheng Street, LongGang District ; Shenzhen 518116,China
1040 1040  
1041 1041  
1042 -= 14. FCC Warning =
957 += 15. FCC Warning =
1043 1043  
1044 1044  
1045 1045  (((
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0