Last modified by Kilight Cao on 2025/02/08 14:05
<
From version < 245.1 >
edited by Kilight Cao
on 2023/09/14 10:33
To version < 69.3 >
edited by Xiaoling
on 2022/07/28 16:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -13,39 +13,27 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 -(((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -)))
22 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
28 28  
29 -(((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 -)))
24 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
32 32  
33 -(((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 -)))
26 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
36 36  
37 -(((
38 38  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 -)))
40 40  
41 -(((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 -)))
30 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
34 +== **1.2 Specifications** ==
48 48  
36 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,17 +57,15 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
51 +* Work Temperature: -20 ~~ 65°C
52 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 69  
70 -== 1.3 Features ==
56 +== **1.3 Features** ==
71 71  
72 72  
73 73  * Open Source Debian system
... ... @@ -82,268 +82,122 @@
82 82  ** Semtech UDP Packet Forwarder
83 83  ** LoRaWAN Basic Station
84 84  ** ChirpStack-Gateway-Bridge (MQTT)
85 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
86 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
71 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
72 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
87 87  
88 88  
89 -== 1.4 LED Indicators ==
90 90  
76 +== **1.4 Block Diagram** ==
91 91  
92 -LPS8-V2 has totally four LEDs, They are:
93 93  
94 94  
95 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
80 +== **1.5 LED Indicators** ==
96 96  
97 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
98 98  
99 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
83 +LPS8-V2 has totally four LEDs, They are:
100 100  
101 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
102 102  
103 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
86 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
104 104  
105 - ✓** SOLID RED:** Device doesn't have an Internet connection.
106 106  
107 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
89 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
108 108  
109 109  
110 -== 1.5 Button Intruction ==
92 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
111 111  
94 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
112 112  
113 -LPS8-V2 has a black toggle button, which is:
96 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
114 114  
98 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
115 115  
116 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
117 117  
118 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
101 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
119 119  
120 120  
121 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
122 122  
123 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
105 += **2. Quick Start** =
124 124  
125 -
126 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
127 -
128 -See this link for steps on how to clear data from the built-in server: **[[How to clear data from the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtocleardatafromthebuilt-inserver]]**
129 -
130 -
131 -= 2. Quick Start =
132 -
133 -
134 134  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
135 135  
136 136  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
137 137  
138 138  
139 -== 2.1 Access and Configure LPS8-V2 ==
112 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
140 140  
141 -=== 2.1.1 Find IP address of LPS8-V2 ===
142 142  
115 +== **2.1.1 connect the network.** ==
143 143  
144 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
117 +=== ===
145 145  
119 +=== **Method 1**: Connect via Ethernet with DHCP IP from the router ===
146 146  
147 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
121 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
148 148  
149 -(% style="background-color:yellow" %)**dragino+dragino**
150 -
151 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
152 -
153 -[[image:image-20230527084515-1.png]]
154 -
155 -[[image:image-20230527085250-2.png||height="495" width="284"]]
156 -
157 -
158 -
159 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
160 -
161 -
162 -(((
163 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
164 -)))
165 -
166 -(((
167 167  You can also use this IP to connect.
168 -)))
169 169  
170 170  [[image:image-20220622100129-1.png||height="332" width="1263"]]
171 171  
172 172  
128 +=== **Method 2**: Connect via WiFi with DHCP IP from the router ===
173 173  
174 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
175 175  
131 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
176 176  
177 -[[image:image-20230107084650-2.png||height="310" width="839"]]
178 178  
134 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
179 179  
180 -(% style="color:blue" %)**Steps to connect via fallback IP:**
181 181  
182 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
137 +**Steps to connect via fallback IP:**
183 183  
184 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
139 +~1. Connect PC’s Ethernet port to LPS8-V2's WAN port
185 185  
141 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
186 186  
187 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
143 +[[image:image-20220622101433-4.png]]
188 188  
189 189  
190 -As in the below photo:
146 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
191 191  
192 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
193 193  
149 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
194 194  
195 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
196 196  
197 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
152 +Fill in the WiFi information by checking the box and clicking **Save&Apply**
198 198  
199 199  
200 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
201 -
202 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
203 -
204 -
205 -
206 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
207 -
208 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
209 -
210 -
211 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
212 -
213 -
214 214  [[image:image-20220622102702-6.png]]
215 215  
216 216  
217 -
218 218  **Wi-Fi configuration successful**
219 219  
220 220  
221 221  [[image:image-20220622102847-7.png]]
222 222  
163 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
223 223  
224 -[[image:image-20220622102901-8.png||height="476" width="938"]]
225 225  
226 226  
227 -=== 2.1.2 Access Configure Web UI ===
228 228  
168 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
229 229  
230 -**Web Interface**
231 231  
232 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
171 +=== **2.2.1 Select your area frequency** ===
233 233  
234 -
235 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
236 -
237 -You will see the login interface of LPS8-V2 as shown below.
238 -
239 -The account details for Web Login are:
240 -
241 -(% style="color:blue" %)**User Name: root**
242 -
243 -(% style="color:blue" %)**Password:   dragino**
244 -
245 -[[image:image-20230106153501-1.png||height="367" width="894"]]
246 -
247 -
248 -== 2.2  Typical Network Setup ==
249 -
250 -=== 2.2.1  Overview ===
251 -
252 -
253 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
254 -
255 -* **WAN Port Internet Mode**
256 -
257 -* **WiFi Client Mode**
258 -
259 -* **Cellular Mode**
260 -
261 -
262 -=== 2.2.2  Use WAN port to access Internet ===
263 -
264 -
265 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
266 -
267 -
268 -[[image:image-20230411100633-2.png||height="501" width="935"]]
269 -
270 -
271 -=== 2.2.3  Access the Internet as a WiFi Client ===
272 -
273 -
274 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
275 -
276 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
277 -
278 -[[image:image-20230411095739-1.png||height="264" width="691"]]
279 -
280 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
281 -
282 -
283 -=== 2.2.4  Use built-in 4G modem for internet access ===
284 -
285 -
286 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
287 -
288 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
289 -
290 -
291 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
292 -
293 -First, install the Micro SIM card as below direction
294 -
295 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
296 -
297 -
298 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
299 -
300 -
301 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
302 -
303 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
304 -
305 -
306 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
307 -
308 -
309 -=== 2.2.5  Check Internet connection ===
310 -
311 -
312 -In the **home** page, we can check the Internet connection.
313 -
314 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
315 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
316 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
317 -
318 -[[image:image-20230411101534-3.png||height="544" width="942"]]
319 -
320 -
321 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
322 -
323 -=== 2.3.1 Select your area frequency ===
324 -
325 -
326 -(((
327 327  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
328 328  
329 -
330 -)))
175 +[[image:image-20220622103332-9.png]]
331 331  
332 -[[image:image-20220622103332-9.png||height="485" width="938"]]
333 333  
178 +=== **2.2.2 Get the only gateway EUI** ===
334 334  
335 -=== 2.3.2 Get the only gateway EUI ===
336 -
337 -
338 338  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
339 339  
182 +[[image:image-20220622103355-10.png]]
340 340  
341 -[[image:image-20220622103355-10.png||height="698" width="949"]]
342 342  
185 +**Note: Choose the cluster that corresponds to a specific Gateway server address**
343 343  
344 -(% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
345 -
346 -
347 347  **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
348 348  
349 349  **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
... ... @@ -356,14 +356,13 @@
356 356  [[image:image-20220622103956-12.png]]
357 357  
358 358  
359 -=== 2.3.3 Register the gateway to The Things Network ===
360 360  
200 +== 2.2.3 Register the gateway to The Things Network ==
361 361  
362 362  **Login to The Things Network**
363 363  
364 364  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
365 365  
366 -
367 367  **Add the gateway**
368 368  
369 369  [[image:image-20220622104252-13.png||height="511" width="953"]]
... ... @@ -372,601 +372,198 @@
372 372  **Get it online**
373 373  
374 374  
375 -= 3. Web Configure Pages =
214 += **3. Web Configure Pages** =
376 376  
377 -== 3.1 Home ==
378 378  
217 +== **3.1 Home** ==
379 379  
380 -Shows the system running status:
219 +//Shows the system running status~://
381 381  
382 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
221 +== **3.2 LoRa Settings** ==
383 383  
384 384  
385 -== 3.2 LoRa Settings ==
224 +=== **3.2.1 LoRa ~-~-> LoRa** ===
386 386  
387 -=== 3.2.1 LoRa ~-~-> LoRa ===
388 388  
227 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
389 389  
390 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
229 +//Different LPS8v2 hardware versions can support different frequency ranges~://
391 391  
392 -Different LPS8v2 hardware versions can support different frequency ranges:
231 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
232 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
393 393  
394 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
395 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
396 -
397 397  (% class="wikigeneratedid" %)
398 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
235 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page **LogRead ~-~-> LoRa Log**//
399 399  
400 -
401 401  (% class="wikigeneratedid" %)
402 402  [[image:image-20220616110739-1.png||height="372" width="682"]]
403 403  
404 404  
405 -(((
406 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
407 -)))
241 +//**Note ***: See this instruction for how to customize the frequency band~://
408 408  
243 +//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
409 409  
410 -== 3.3 LoRaWAN Settings ==
411 411  
412 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
246 +== **3.3 LoRaWAN Settings** ==
413 413  
414 414  
415 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
249 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
416 416  
417 417  
252 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
253 +
418 418  [[image:image-20220616111932-2.png||height="516" width="672"]]
419 419  
420 420  
421 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
257 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
422 422  
423 423  
424 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
260 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
425 425  
426 -
427 427  [[image:image-20220616113246-3.png||height="396" width="672"]]
428 428  
429 429  
430 -(((
431 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
432 -)))
265 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
433 433  
434 434  
435 -== 3.4 Network Settings ==
268 +== **3.4 Network Settings** ==
436 436  
437 -=== 3.4.1 Network ~-~-> WiFi ===
438 438  
439 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
271 +=== **3.4.1 Network ~-~-> WiFi** ===
440 440  
441 -[[image:image-20230619095946-1.png||height="332" width="827"]]
442 442  
274 +[[image:image-20220616114756-4.png||height="251" width="669"]]
443 443  
444 -=== 3.4.2 Network ~-~-> System Status ===
445 445  
277 +=== **3.4.2 Network ~-~-> System Status** ===
446 446  
447 -[[image:image-20220820134112-2.png||height="539" width="668"]]
448 448  
280 +[[image:image-20220616115229-5.png||height="548" width="665"]]
449 449  
450 -=== 3.4.3 Network ~-~-> Network ===
451 451  
283 +=== **3.4.3 Network ~-~-> Firewall** ===
452 452  
453 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
454 454  
455 -[[image:image-20230214093657-2.png||height="333" width="858"]]
286 +[[image:image-20220616115351-6.png||height="244" width="661"]]
456 456  
457 457  
458 -=== 3.4.4 Network ~-~-> Cellular ===
289 +== **3.5 System** ==
459 459  
460 460  
461 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
292 +=== **3.5.1  System ~-~-> System Overview** ===
462 462  
463 -(% style="color:red" %)**Note: APN cannot be empty.**
464 464  
465 -[[image:image-20230228115126-1.png]]
466 -
467 -
468 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
469 -
470 -[[image:image-20230228115535-2.png||height="478" width="888"]]
471 -
472 -
473 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
474 -
475 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
476 -
477 -
478 -== 3.5 System ==
479 -
480 -=== 3.5.1 System ~-~-> System Overview ===
481 -
482 -
483 483  Shows the system info:
484 484  
485 -[[image:image-20220917144512-5.png||height="618" width="853"]]
486 486  
298 +=== **3.5.2 System ~-~-> Backup/Restore** ===
487 487  
488 -=== 3.5.2 System ~-~-> System General ===
489 489  
301 +[[image:image-20220616115808-7.png||height="194" width="649"]]
490 490  
491 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
492 492  
493 -In addition, Users can customize the FallBack IP address.
494 494  
495 -[[image:image-20230214094058-3.png]]
305 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
496 496  
497 497  
498 -=== 3.5.3 System ~-~-> Backup/Restore ===
308 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: **The Things Network - Stack (Open Source 3.19 Version).**
499 499  
310 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
500 500  
501 -[[image:image-20220917144725-6.png||height="208" width="869"]]
502 502  
313 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
503 503  
504 -=== 3.5.4 System ~-~-> Remoteit ===
505 505  
506 -
507 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
508 -
509 -
510 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
511 -
512 -[[image:image-20221230092303-2.png]]
513 -
514 -
515 -=== 3.5.5 System ~-~-> Package Management ===
516 -
517 -
518 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
519 -
520 -[[image:image-20230214094316-4.png]]
521 -
522 -
523 -= 4. Build-in Server =
524 -
525 -
526 -Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
527 -
528 -[[image:image-20230616175617-8.png||height="390" width="894"]]
529 -
530 -[[image:image-20230616175558-7.png||height="362" width="894"]]
531 -
532 -
533 -
534 -(% style="color:red" %)**Note:**
535 -
536 - **Path**: Server ~-~-> Network Server
537 -
538 - Server ~-~-> Application Server
539 -
540 -
541 -**Troubleshooting:**
542 -
543 -
544 -**~ 1. URL does not jump properly**
545 -
546 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
547 -
548 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
549 -
550 -
551 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
552 -
553 -
554 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
555 -
556 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
557 -
558 -
559 559  Login account:
560 560  
561 -**Username : ** (% style="background-color:yellow" %)**admin**
318 +**User ID: ** (% class="mark" %)admin
562 562  
563 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
320 +**Password: ** (% class="mark" %)dragino
564 564  
565 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
566 566  
323 +[[image:image-20220725171719-1.png||height="570" width="769"]]
567 567  
325 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
326 + You can complete the installation manually with the following command.(%%)**
568 568  
569 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
570 570  
571 -
572 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
573 -
574 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
575 -
576 -[[image:image-20230321092456-1.png]]
577 -
578 -
579 -== 4.2 Application Server ~-~- Node-Red ==
580 -
581 -
582 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
583 -
584 -
585 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
586 -
587 -
588 -[[image:image-20220725172124-3.png||height="610" width="843"]]
589 -
590 -
591 -
592 -=== **Using Node-Red, InfluxDB and Grafana** ===
593 -
594 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
595 -
596 -
597 -the users can refer to this link to install them.
598 -
599 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
600 -
601 -
602 -=== **Upgrade the node.js** ===
603 -
604 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
605 -
606 -
607 -the users can refer to this link to upgrade them.
608 -
609 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
610 -
611 -
612 -== 4.3 How to disable the built-in server ==
613 -
614 -
615 -Use the following commands to start and stop the TTNv3 service:
616 -
617 617  (% class="box infomessage" %)
618 618  (((
619 -**# start**
620 -systemctl start ttnstack
331 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
621 621  
622 -**# stop**
623 -systemctl stop ttnstack
624 -
625 -**# enable**
626 -systemctl enable ttnstack
627 -
628 -**#disable**
629 -systemctl disable ttnstack
333 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
630 630  )))
631 631  
632 -Use the following commands to start and stop the Node-Red service:
633 633  
634 -(% class="box infomessage" %)
635 -(((
636 -**# start**
637 -systemctl start nodered
337 += **5. Build-in Application Server ~-~- Node-Red** =
638 638  
639 -**# stop**
640 -systemctl stop nodered
641 641  
642 -**# enable**
643 -systemctl enable nodered
340 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: **Node-Red.**
644 644  
645 -**#disable**
646 -systemctl disable nodered
647 -)))
342 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
648 648  
649 649  
650 -== 4.4 How to use ChirpStack on LPS8-V2 ==
345 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
651 651  
347 +[[image:image-20220725172124-3.png||height="610" width="843"]]
652 652  
653 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
654 654  
655 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
656 656  
351 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
352 + You can complete the installation manually with the following command.(%%)**
657 657  
658 -=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
659 659  
660 -
661 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
662 -
663 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
664 -
665 -[[image:image-20230602140406-3.png||height="480" width="918"]]
666 -
667 -
668 -When the configuration is complete, click** "Save&Apply"**.
669 -
670 -
671 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
672 -
673 -[[image:image-20230602143122-4.png||height="511" width="983"]]
674 -
675 -
676 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
677 -
678 -
679 -
680 -= 6. How users can access LPS8-V2 using serial USB =
681 -
682 -
683 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
684 -
685 -Port 1 of the UART on the LPS8-V2 is GND
686 -
687 687  (% class="box infomessage" %)
688 688  (((
689 -**TXD  <~-~--> UART RXD (Gray line)**
690 -
691 -**RXD  <~-~--> UART TXD (White line)**
692 -
693 -**GND <~-~--> GND (Black line)**
357 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
358 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
694 694  )))
695 695  
696 -**LPS8v2 UART connection photo**
361 +[[image:image-20220728102000-1.png]]
697 697  
698 -[[image:image-20230421094319-2.png||height="351" width="392"]]
699 699  
700 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
364 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
701 701  
702 -
703 -[[image:image-20220804164928-3.png||height="320" width="332"]]
704 -
705 -
706 -[[image:image-20220804164747-2.png||height="622" width="594"]]
707 -
708 -
709 -= 7. OTA System Update =
710 -
711 -
712 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
713 -
714 -
715 -== 7.1 Auto-update method ==
716 -
717 -
718 -The default, each gateway will enable the auto-update function.
719 -
720 -this function will be triggered every boot and every midnight.
721 -
722 -
723 -Users can enable/disable it via Web Page
724 -
725 -[[image:image-20230607094447-2.png]]
726 -
727 -
728 -== 7.2 Manual upgrade method ==
729 -
730 -
731 -1). Using the Linux command to upgrade the system
732 -
733 -
734 -(% class="box infomessage" %)
735 735  (((
736 -**apt update && apt install *dragino***
367 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
737 737  )))
738 738  
739 -
740 -2). Upgrade the system via the Web page button of "Manual Update"
741 -
742 -
743 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
744 -
745 -[[image:image-20230607093849-1.png]]
746 -
747 -
748 -
749 -= 8. FAQ =
750 -
751 -== 8.1 How to change Hostname ==
752 -
753 -
754 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
755 -
756 -(% class="box infomessage" %)
757 757  (((
758 -hostnamectl set-hostname dragino-123456
759 -)))
371 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
760 760  
761 -[[image:image-20230517102429-1.png]]
762 762  
763 -After the configuration is complete, run "reboot" to restart the gateway.
374 += **11 Reference** =
764 764  
765 -
766 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
767 -
768 -
769 -Migrate guide:
770 -
771 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
772 -
773 -**2. On the Server ~-~-> Network Server interface, click "Management"**
774 -
775 -[[image:image-20230616162454-1.png]]
776 -
777 -
778 -**3. Click "Migrate-Chirpstack"**
779 -
780 -[[image:image-20230616162742-2.png]]
781 -
782 -
783 -**4. Strat Install **
784 -
785 -Click start Install and wait until the migration succeeds
786 -
787 -[[image:image-20230616162934-3.png]]
788 -
789 -
790 -**5.Migration complete check result**
791 -
792 -[[image:image-20230616174526-4.png||height="706" width="983"]]
793 -
794 -
795 -[[image:image-20230616180004-9.png]]
796 -
797 -
798 -== 8.3 How to reduce the 4g data consumed ==
799 -
800 -
801 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
802 -
803 -[[image:image-20230719100239-1.png||height="724" width="994"]]
804 -
805 -
806 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
807 -
808 -[[image:image-20230719100332-2.png]]
809 -
810 -
811 -3. Disable the auto-update:
812 -
813 -[[image:image-20230719100419-3.png||height="458" width="995"]]
814 -
815 -
816 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
817 -
818 -
819 -(% class="box infomessage" %)
820 -(((
821 -apt update && apt install helium-gateway
822 -)))
823 -
824 -
825 -== 8.5 Reinstall Build-in The Things Stack ==
826 -
827 -
828 -
829 -= 9. Trouble Shooting =
830 -
831 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
832 -
833 -
834 -[[image:image-20220920135918-1.png]]
835 -
836 -
837 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
838 -
839 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
840 -
841 -
842 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
843 -
844 -**Click the update URL button to configure the URL with the current eth port address.**
845 -
846 -[[image:image-20220920141936-2.png]]
847 -
848 -
849 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
850 -
851 -
852 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
853 -
854 -[[image:image-20230508171607-1.png]]
855 -
856 -
857 -== 9.3  Fallback IP does not work, how can users check ==
858 -
859 -
860 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
861 -
862 -
863 -**1.Check whether the configuration is correct**
864 -
865 -Run the CMD command to ipconfig and ping 172.31.255.254.
866 -
867 -If this fails, the user needs to reconfigure.
868 -
869 -[[image:image-20230413170224-3.png||height="433" width="707"]]
870 -
871 -[[image:image-20230413170246-4.png]]
872 -
873 -
874 -**2. Check whether the firewall is disabled**
875 -
876 -If the firewall is not down, this will affect access to the gateway.
877 -
878 -
879 -== 9.4  Click "Manual_Update", why there is no response? ==
880 -
881 -
882 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
883 -
884 -
885 -[[image:image-20230527090555-3.png||height="660" width="832"]]
886 -
887 -
888 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
889 -
890 -
891 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
892 -
893 -
894 -(% class="box infomessage" %)
895 -(((
896 -apt update && apt install dragino-fallback
897 -
898 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
899 -)))
900 -
901 -
902 -== 9.6  How to clear data from the built-in server ==
903 -
904 -
905 -**1) Build-in The Things Network**
906 -
907 -Refer to this link to delete the Built-in server's device.
908 -
909 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
910 -
911 -
912 -**2) Build-in Chirpstack**
913 -
914 -
915 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
916 -
917 -
918 -(((
919 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
920 -)))
921 -
922 -(((
923 -With your question as detailed as possible. We will reply and help you in the shortest.
924 -
925 -
926 -= 11. Reference =
927 -
928 -
929 929  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
930 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
931 931  
932 932  
933 933  )))
934 934  
935 -= 12. Order Info =
381 += **12. Order Info** =
936 936  
937 -
938 938  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
939 939  
940 940  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
941 941  
942 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
387 +* **AS923**: LoRaWAN AS923 band
388 +* **AU915**: LoRaWAN AU915 band
389 +* **EU868**: LoRaWAN EU868 band
390 +* **KR920**: LoRaWAN KR920 band
391 +* **US915**: LoRaWAN US915 band
392 +* **IN865**: LoRaWAN IN865 band
943 943  
944 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
945 -
946 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
947 -
948 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
949 -
950 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
951 -
952 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
953 -
954 954  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
955 955  
956 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
396 +* ** E**: EMEA, Korea, Thailand, India.
397 +* ** A**: North America/ Rogers/AT&T/T-Mobile.
398 +* ** AU**: Latin America, New Zeland, Taiwan
399 +* ** J**: Japan, DOCOMO/SoftBank/ KDDI
957 957  
958 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
959 -
960 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
961 -
962 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
963 -
964 964  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
965 965  
966 966  
967 -= 13. Manufacturer Info =
404 += **13. Manufacturer Info** =
968 968  
969 -
970 970  **Shenzhen Dragino Technology Development co. LTD**
971 971  
972 972  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -974,38 +974,21 @@
974 974  LongCheng Street, LongGang District ; Shenzhen 518116,China
975 975  
976 976  
977 -= 14. FCC Warning =
413 += **14. FCC Warning** =
978 978  
979 -
980 -(((
981 981  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
982 -)))
983 983  
984 -(((
985 985  ~-~- Reorient or relocate the receiving antenna.
986 -)))
987 987  
988 -(((
989 989  ~-~- Increase the separation between the equipment and receiver.
990 -)))
991 991  
992 -(((
993 993  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
994 -)))
995 995  
996 -(((
997 997  ~-~- Consult the dealer or an experienced radio/TV technician for help.
998 -)))
999 999  
1000 1000  
1001 -(((
1002 1002  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
1003 -)))
1004 1004  
1005 1005  
1006 -(((
1007 1007  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
1008 -
1009 -
1010 1010  )))
1011 -)))
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0