Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 244.2 >
edited by Xiaoling
on 2023/08/01 15:34
To version < 326.1 >
edited by Kilight Cao
on 2024/09/02 08:55
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 -- LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents：**
11 +**Table of Contents:**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== 1.1 What is LPS8v2 ==
21 +== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
22 22  
23 23  
24 24  (((
... ... @@ -66,8 +66,6 @@
66 66  * Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -
70 -
71 71  == 1.3 Features ==
72 72  
73 73  
... ... @@ -83,11 +83,9 @@
83 83  ** Semtech UDP Packet Forwarder
84 84  ** LoRaWAN Basic Station
85 85  ** ChirpStack-Gateway-Bridge (MQTT)
86 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
84 +* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
87 87  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
88 88  
89 -
90 -
91 91  == 1.4 LED Indicators ==
92 92  
93 93  
... ... @@ -100,11 +100,11 @@
100 100  
101 101  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
102 102  
103 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
104 104  
105 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
106 106  
107 - ✓** SOLID RED:** Device doesn't have an Internet connection.
103 + ✓**  SOLID RED:** Device doesn't have an Internet connection.
108 108  
109 109  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
110 110  
... ... @@ -127,9 +127,16 @@
127 127  
128 128  (% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
129 129  
130 -See this link for steps on how to clear data from the built-in server: **[[How to clear data from the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtocleardatafromthebuilt-inserver]]**
126 +See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
131 131  
132 132  
129 +When the gateway restores the factory settings is complete,
130 +
131 +The WiFi configuration will enable WiFi Access Point by default.
132 +
133 +The other configuration will be restored to the default configuration.
134 +
135 +
133 133  = 2. Quick Start =
134 134  
135 135  
... ... @@ -157,7 +157,6 @@
157 157  [[image:image-20230527085250-2.png||height="495" width="284"]]
158 158  
159 159  
160 -
161 161  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
162 162  
163 163  
... ... @@ -172,7 +172,6 @@
172 172  [[image:image-20220622100129-1.png||height="332" width="1263"]]
173 173  
174 174  
175 -
176 176  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
177 177  
178 178  
... ... @@ -196,7 +196,7 @@
196 196  
197 197  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
198 198  
199 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
200 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
200 200  
201 201  
202 202  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -204,7 +204,6 @@
204 204  [[image:image-20230111094247-2.png||height="619" width="1250"]]
205 205  
206 206  
207 -
208 208  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
209 209  
210 210  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -244,7 +244,7 @@
244 244  
245 245  (% style="color:blue" %)**Password:   dragino**
246 246  
247 -[[image:image-20230106153501-1.png||height="367" width="894"]]
247 +[[image:image-20240318160845-1.png]]
248 248  
249 249  
250 250  == 2.2  Typical Network Setup ==
... ... @@ -260,8 +260,6 @@
260 260  
261 261  * **Cellular Mode**
262 262  
263 -
264 -
265 265  === 2.2.2  Use WAN port to access Internet ===
266 266  
267 267  
... ... @@ -309,6 +309,9 @@
309 309  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
310 310  
311 311  
310 +**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 +
312 +
312 312  === 2.2.5  Check Internet connection ===
313 313  
314 314  
... ... @@ -432,25 +432,41 @@
432 432  
433 433  (((
434 434  Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
436 +
437 +
435 435  )))
436 436  
440 +== (% id="cke_bm_166450S" style="display:none" %) (%%)3.4 Forwarder ==
437 437  
438 -== 3.4 Network Settings ==
442 +=== 3.4.1 Forwarder~-~->MQTT Forwarder ===
439 439  
440 -=== 3.4.1 Network ~-~-> WiFi ===
441 441  
445 +In the latest version, MQTT Forwarder functionality has been added to the LPS8V2 gateway by default
446 +
447 +Users can configure the MQTT Forwarder on the **Forwarder~-~->MQTT** interface, and when the configuration is successful, it will forward the sensor data of the lorawan server chirpstack built in LPS8v2
448 +
449 +For a detailed example of this feature, see this link:**[[MQTT Forward Instruction - DRAGINO>>http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/#H3.3A0UseLoRaWANProtocolforcommunication--ForLPS8V2]]**
450 +
451 +(% class="wikigeneratedid" %)
452 +[[image:image-20240831152113-2.png]]
453 +
454 +
455 +== 3.5 Network Settings ==
456 +
457 +=== 3.5.1 Network ~-~-> WiFi ===
458 +
442 442  Users can configure the wifi WAN and enable Wifi Access Point on this interface
443 443  
444 444  [[image:image-20230619095946-1.png||height="332" width="827"]]
445 445  
446 446  
447 -=== 3.4.2 Network ~-~-> System Status ===
464 +=== 3.5.2 Network ~-~-> System Status ===
448 448  
449 449  
450 450  [[image:image-20220820134112-2.png||height="539" width="668"]]
451 451  
452 452  
453 -=== 3.4.3 Network ~-~-> Network ===
470 +=== 3.5.3 Network ~-~-> Network ===
454 454  
455 455  
456 456  In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
... ... @@ -458,7 +458,7 @@
458 458  [[image:image-20230214093657-2.png||height="333" width="858"]]
459 459  
460 460  
461 -=== 3.4.4 Network ~-~-> Cellular ===
478 +=== 3.5.4 Network ~-~-> Cellular ===
462 462  
463 463  
464 464  In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
... ... @@ -477,18 +477,21 @@
477 477  
478 478  [[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
479 479  
497 +(% class="wikigeneratedid" id="H5.MQTTForwarder" %)
498 +(% id="cke_bm_4823S" style="display:none" %)
480 480  
481 -== 3.5 System ==
482 482  
483 -=== 3.5.1 System ~-~-> System Overview ===
501 +== 3.6 System ==
484 484  
503 +=== 3.6.1 System ~-~-> System Overview ===
485 485  
505 +
486 486  Shows the system info:
487 487  
488 -[[image:image-20220917144512-5.png||height="618" width="853"]]
508 +[[image:image-20231031162854-1.png]]
489 489  
490 490  
491 -=== 3.5.2 System ~-~-> System General ===
511 +=== 3.6.2 System ~-~-> System General ===
492 492  
493 493  
494 494  In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
... ... @@ -498,15 +498,29 @@
498 498  [[image:image-20230214094058-3.png]]
499 499  
500 500  
501 -=== 3.5.3 System ~-~-> Backup/Restore ===
521 +=== 3.6.3 System ~-~-> Backup/Restore ===
502 502  
503 503  
504 -[[image:image-20220917144725-6.png||height="208" width="869"]]
524 +[[image:image-20231031162927-2.png]]
505 505  
526 +=== 3.6.4 System ~-~-> Reboot / Reset ===
506 506  
507 -=== 3.5.4 System ~-~-> Remoteit ===
528 +In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
508 508  
530 +ETH LED will SOLID BULE Until the restore is finished.
509 509  
532 +When the gateway restores the factory settings is complete,
533 +
534 +The WiFi configuration will enable WiFi Access Point by default.
535 +
536 +The other configuration will be restored to the default configuration.
537 +
538 +[[image:image-20240203172853-1.png||height="365" width="901"]]
539 +
540 +
541 +=== 3.6.5 System ~-~-> Remoteit ===
542 +
543 +
510 510  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
511 511  
512 512  
... ... @@ -515,7 +515,7 @@
515 515  [[image:image-20221230092303-2.png]]
516 516  
517 517  
518 -=== 3.5.5 System ~-~-> Package Management ===
552 +=== 3.6.6 System ~-~-> Package Management ===
519 519  
520 520  
521 521  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -523,102 +523,114 @@
523 523  [[image:image-20230214094316-4.png]]
524 524  
525 525  
526 -= 4. Build-in Server =
560 +== 3.7 Logread ==
527 527  
562 +=== 3.7.1 LoRa Log ===
528 528  
529 -Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
530 530  
531 -[[image:image-20230616175617-8.png||height="390" width="894"]]
565 +In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
532 532  
533 -[[image:image-20230616175558-7.png||height="362" width="894"]]
567 +[[image:image-20240416112509-1.png]]
534 534  
535 535  
570 +=== 3.7.2 Gateway Traffic ===
536 536  
537 -(% style="color:red" %)**Note:**
572 +In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
538 538  
539 - **Path**: Server ~-~-> Network Server
574 +[[image:image-20240416112618-2.png||height="705" width="1122"]]
540 540  
541 - Server ~-~-> Application Server
542 542  
577 +=== 3.7.3 System Log ===
543 543  
544 -**Troubleshooting:**
579 +In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
545 545  
581 +[[image:image-20240416112649-3.png||height="820" width="1122"]]
546 546  
547 -**~ 1. URL does not jump properly**
548 548  
549 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
584 +=== 3.7.4 Record Log ===
550 550  
551 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
586 +In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
552 552  
588 +[[image:image-20240416112712-4.png||height="319" width="1128"]]
553 553  
554 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
555 555  
556 556  
557 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
592 += 4. Build-in Server =
558 558  
559 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
594 +After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
560 560  
561 561  
562 -Login account:
597 +== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
563 563  
564 -**Username : ** (% style="background-color:yellow" %)**admin**
599 +[[image:image-20231106180816-4.png||height="416" width="896"]]
565 565  
566 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
601 +[[image:image-20231201165904-1.png||height="466" width="899"]]
567 567  
568 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
603 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
569 569  
605 +For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
570 570  
571 571  
572 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
573 573  
609 +== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
574 574  
575 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
576 576  
577 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
612 +[[image:image-20230616175558-7.png||height="362" width="894"]]
578 578  
579 -[[image:image-20230321092456-1.png]]
614 +[[image:image-20231201170355-2.png||height="536" width="899"]]
580 580  
616 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
581 581  
582 -== 4.2 Application Server ~-~- Node-Red ==
583 583  
584 584  
585 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
620 +== **3). Troubleshooting:** ==
586 586  
587 587  
588 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
623 +* (((
624 +=== ** If the URL does not jump properly.** ===
625 +)))
589 589  
627 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
590 590  
591 -[[image:image-20220725172124-3.png||height="610" width="843"]]
629 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
592 592  
593 593  
632 +* (((
633 +=== ** How to install InfluxDB, Garfana.** ===
634 +)))
594 594  
595 -=== **Using Node-Red, InfluxDB and Grafana** ===
636 + The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
596 596  
597 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
598 598  
639 +* (((
640 +=== ** How to upgrade the gateway node.js to the latest version.** ===
641 +)))
599 599  
600 -the users can refer to this link to install them.
643 + The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
601 601  
602 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
603 603  
646 +* (((
647 +=== ** How to batch register device on the built-in Chirpstack network server** ===
648 +)))
604 604  
605 -=== **Upgrade the node.js** ===
650 + The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
606 606  
607 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
608 608  
653 +* (((
654 +=== ** Why my gateway is not Chirpstack?** ===
655 +)))
609 609  
610 -the users can refer to this link to upgrade them.
657 + After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
611 611  
612 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
613 613  
660 +* (((
661 +=== ** How to disable the built-in server** ===
662 +)))
614 614  
615 -== 4.3 How to disable the built-in server ==
616 -
617 -
618 -Use the following commands to start and stop the TTNv3 service:
619 -
620 620  (% class="box infomessage" %)
621 621  (((
666 +Use the following commands to start and stop the TTNv3 service:**     **
667 +
622 622  **# start**
623 623  systemctl start ttnstack
624 624  
... ... @@ -632,10 +632,10 @@
632 632  systemctl disable ttnstack
633 633  )))
634 634  
635 -Use the following commands to start and stop the Node-Red service:
636 -
637 637  (% class="box infomessage" %)
638 638  (((
683 +Use the following commands to start and stop the Node-Red service:
684 +
639 639  **# start**
640 640  systemctl start nodered
641 641  
... ... @@ -650,36 +650,44 @@
650 650  )))
651 651  
652 652  
653 -== 4.4 How to use ChirpStack on LPS8-V2 ==
699 +* (((
700 +=== ** How to choose the Chirpstack server frequency SubBand** ===
701 +)))
654 654  
703 +**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
655 655  
656 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
705 + Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
657 657  
658 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
707 +[[image:image-20230602140406-3.png||height="480" width="918"]]
659 659  
660 660  
661 -=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
710 +When the configuration is complete, click** "Save&Apply"**.
662 662  
663 663  
664 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
713 +(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
665 665  
666 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
715 +[[image:image-20230602143122-4.png||height="511" width="983"]]
667 667  
668 -[[image:image-20230602140406-3.png||height="480" width="918"]]
669 669  
670 670  
671 -When the configuration is complete, click** "Save&Apply"**.
719 += 5. Watch Dog =
672 672  
673 673  
674 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
722 +The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
675 675  
676 -[[image:image-20230602143122-4.png||height="511" width="983"]]
677 677  
725 +LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
678 678  
679 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
727 +The uses can be via the below method to enable Watch Dog:
680 680  
729 +(% class="box infomessage" %)
730 +(((
731 +wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
732 +)))
681 681  
734 +[[image:image-20231124113209-1.png||height="470" width="1157"]]
682 682  
736 +
683 683  = 6. How users can access LPS8-V2 using serial USB =
684 684  
685 685  
... ... @@ -733,7 +733,6 @@
733 733  
734 734  1). Using the Linux command to upgrade the system
735 735  
736 -
737 737  (% class="box infomessage" %)
738 738  (((
739 739  **apt update && apt install *dragino***
... ... @@ -742,65 +742,337 @@
742 742  
743 743  2). Upgrade the system via the Web page button of "Manual Update"
744 744  
798 +(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
745 745  
746 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
747 -
748 748  [[image:image-20230607093849-1.png]]
749 749  
750 750  
803 += (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)8 How do I view gateway logs(%%) =
751 751  
752 -= 8. FAQ =
805 +=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)8.1 LoRaWAN Log:(%%) ===
753 753  
754 -== 8.1 How to change Hostname ==
755 755  
808 +==== Semtech UDP Log : ====
756 756  
757 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
810 +When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
758 758  
812 +[[image:image-20231017112115-2.png||height="611" width="821"]]
813 +
814 +
815 +==== Station Log: ====
816 +
817 +When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
818 +
819 +[[image:image-20231017111606-1.png||height="622" width="821"]]
820 +
821 +
822 +=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)8.2  4G Log(%%) ===
823 +
824 +
825 +User needs to access the Linux console of the gateway and enter the following command:
826 +
759 759  (% class="box infomessage" %)
760 760  (((
761 -hostnamectl set-hostname dragino-123456
829 +cat /var/log/qmilog.txt
762 762  )))
763 763  
764 -[[image:image-20230517102429-1.png]]
832 +[[image:image-20231017114417-3.png||height="543" width="679"]]
765 765  
766 -After the configuration is complete, run "reboot" to restart the gateway.
767 767  
835 +LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
768 768  
769 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
837 +Below are some commands as reference:
770 770  
839 +>Usage:  /usr/bin/quectel-CM [options]
840 +> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
841 +> -p pincode Verify sim card pin if sim card is locked
842 +> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
843 +> -f logfilename Save log message of this program to file
844 +> -u usbmonlog filename  Save usbmon log to file
845 +> -i interface Specify which network interface to setup data call when multi-modems exits
846 +> -4 Setup IPv4 data call (default)
847 +> -6 Setup IPv6 data call
848 +> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
849 +> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
850 +> -b Enable network interface bridge function (default 0)
851 +> -v Verbose log mode, for debug purpose.[Examples]
852 +>Example 1: /usr/bin/quectel-CM
853 +>Example 2: /usr/bin/quectel-CM -s 3gnet
854 +>Example 3: /usr/bin/quectel-CM -s 3gnet -v
771 771  
772 -Migrate guide:
773 773  
774 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
775 775  
776 -**2. On the Server ~-~-> Network Server interface, click "Management"**
858 +=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)8.3 Dmesg Log(%%) ===
777 777  
778 -[[image:image-20230616162454-1.png]]
779 779  
861 +Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
780 780  
781 -**3. Click "Migrate-Chirpstack"**
863 +[[image:image-20231017115330-5.png||height="565" width="740"]]
782 782  
783 -[[image:image-20230616162742-2.png]]
784 784  
866 +=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)8.4 Record Log(%%) ===
785 785  
786 -**4. Strat Install **
787 787  
788 -Click start Install and wait until the migration succeeds
869 +Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
789 789  
790 -[[image:image-20230616162934-3.png]]
871 +[[image:image-20231017115124-4.png||height="215" width="880"]]
791 791  
792 792  
793 -**5.Migration complete check result**
874 +=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)8.5 View gateway logs via Linux Command(%%) ===
794 794  
795 -[[image:image-20230616174526-4.png||height="706" width="983"]]
796 796  
877 +**Semtech UDP Log :**
797 797  
798 -[[image:image-20230616180004-9.png]]
879 +(% class="box infomessage" %)
880 +(((
881 +**journalctl -u draginofwd -f**
882 +)))
799 799  
884 +[[image:image-20231207144627-1.png||height="371" width="1017"]]
800 800  
801 -== 8.3 How to reduce the 4g data consumed ==
802 802  
887 +**Station Log:**
803 803  
889 +(% class="box infomessage" %)
890 +(((
891 +**tail -f /var/log/station.log **
892 +)))
893 +
894 +[[image:image-20231207144758-2.png||height="132" width="1022"]]
895 +
896 +
897 +**Dmesg Log:**
898 +
899 +(% class="box infomessage" %)
900 +(((
901 +**dmesg**
902 +)))
903 +
904 +[[image:image-20231207145210-3.png||height="310" width="1021"]]
905 +
906 +
907 +
908 +(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
909 += (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)9. More Services(%%) =
910 +
911 +== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)9.1 NTP Service/Time Synchronization(%%) ==
912 +
913 +The gateway time sync service is provided by chrony service
914 +
915 +
916 +=== 1). Modify the NTP server address: ===
917 +
918 +(% class="box infomessage" %)
919 +(((
920 +Configuration file path:  /etc/chrony/chrony.conf
921 +)))
922 +
923 +
924 +=== 2). Start/Stop/Enable/Disable NTP service: ===
925 +
926 +(% class="box infomessage" %)
927 +(((
928 +systemctl start chrony
929 +\\systemctl stop chrony
930 +\\systemctl disable chrony
931 +\\systemctl enable chrony
932 +)))
933 +
934 +
935 +(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
936 += (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10. More features(%%) =
937 +
938 +(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
939 +== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)10.1 Chirpstack MQTT Forwarder(%%) ==
940 +
941 +
942 +ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
943 +
944 +
945 +(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
946 +=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
947 +
948 +In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
949 +
950 +(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
951 +By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
952 +
953 +* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
954 +* Configure the following settings:
955 +** **Service Provider:** //Custom / Private LoRaWAN//
956 +** **Server Address:** localhost
957 +** **Uplink Port:** 1700
958 +** **Downlink Port:** 1700
959 +* Click **Save & Apply**
960 +
961 +[[image:image-20240518145929-2.png||height="652" width="727"]]
962 +
963 +
964 +(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
965 +=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
966 +
967 +
968 +(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
969 +(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
970 +
971 +First you must login into the gateway using SSH:
972 +
973 +(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
974 +(((
975 +ssh root@GATEWAY-IP-ADDRESS
976 +)))
977 +
978 +(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
979 +The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
980 +
981 +
982 +(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
983 +(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
984 +
985 +(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
986 +Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
987 +
988 +(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
989 +(((
990 +cd /tmp
991 +wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
992 +)))
993 +
994 +
995 +(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
996 +(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
997 +
998 +Use the dpkg package-manager to install the downloaded package. Example:
999 +
1000 +(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
1001 +(((
1002 +dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
1003 +)))
1004 +
1005 +[[image:image-20240518152148-4.png]]
1006 +
1007 +
1008 +(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
1009 +**Configuration**
1010 +
1011 +To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
1012 +
1013 +(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
1014 +This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1015 +
1016 +
1017 +**ChirpStack MQTT Forwarder Setting:**
1018 +
1019 +(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1020 +(((
1021 +topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
1022 +
1023 +server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1024 +)))
1025 +
1026 +username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1027 +
1028 +
1029 +Use commands to modify configuration files:
1030 +
1031 +(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1032 +(((
1033 +vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1034 +)))
1035 +
1036 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1037 +
1038 +
1039 +**(Re)start and stop commands**
1040 +
1041 +Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1042 +
1043 +(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1044 +(((
1045 +# start
1046 +
1047 +(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1048 +systemctl start chirpstack-mqtt-forwarder
1049 +
1050 +# stop
1051 +
1052 +systemctl stop chirpstack-mqtt-forwarder
1053 +
1054 +# restart
1055 +
1056 +systemctl restart chirpstack-mqtt-forwarder
1057 +)))
1058 +
1059 +(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1060 +(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1061 +
1062 +
1063 +**Check result**
1064 +
1065 +(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1066 +Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
1067 +
1068 +[[image:image-20240518154223-5.png]]
1069 +
1070 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1071 +
1072 +
1073 +== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.2 As a Data-only hotspot connect the helium blockchain(%%) ==
1074 +
1075 +
1076 +(% class="box infomessage" %)
1077 +(((
1078 +(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1079 +apt update && apt install helium-gateway
1080 +)))
1081 +
1082 +
1083 +
1084 += (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11. FAQ(%%) =
1085 +
1086 +== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)11.1 How to change Hostname(%%) ==
1087 +
1088 +
1089 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
1090 +
1091 +(% class="box infomessage" %)
1092 +(((
1093 +hostnamectl set-hostname dragino-123456
1094 +)))
1095 +
1096 +[[image:image-20230517102429-1.png]]
1097 +
1098 +After the configuration is complete, run "reboot" to restart the gateway.
1099 +
1100 +
1101 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
1102 +
1103 +
1104 +Migrate guide:
1105 +
1106 +To stabilize the completion of the migration, The users can migrate in one of the following ways
1107 +
1108 +**Method 1. Using the Linux shell, **
1109 +
1110 +**Method 2. Flash a new image with the Chirpstack**
1111 +
1112 +
1113 +=== Method 1: Using the Linux shell ===
1114 +
1115 +(% class="box infomessage" %)
1116 +(((
1117 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1118 +)))
1119 +
1120 +
1121 +=== Method 2: Flash a new image ===
1122 +
1123 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1124 +
1125 +
1126 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
1127 +
1128 +
804 804  1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
805 805  
806 806  [[image:image-20230719100239-1.png||height="724" width="994"]]
... ... @@ -816,20 +816,47 @@
816 816  [[image:image-20230719100419-3.png||height="458" width="995"]]
817 817  
818 818  
819 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
1144 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
820 820  
821 821  
1147 +By default, the LPS8v2's built-in server is ChirpStack v4,
1148 +
1149 +If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1150 +
1151 +[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
1152 +
1153 +
1154 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1155 +
1156 +
1157 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).5 (%%)How to check my USB port dev/tty after i plug in USB device. ==
1158 +
1159 +
1160 +When an external USB device is connected to LPS8v2, the user can access the Linux console of the LPS8v2 gateway and run the following command to check the USB port dev/tty:
1161 +
822 822  (% class="box infomessage" %)
823 823  (((
824 -apt update && apt install helium-gateway
1164 +dmesg
825 825  )))
826 826  
1167 +[[image:image-20240803095144-1.png]]
827 827  
828 -= 9. Trouble Shooting =
829 829  
830 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
831 831  
1171 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).6 DIN Mount Reference:(%%) ==
832 832  
1173 +
1174 +[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1175 +
1176 +[[image:image-20240318095617-2.png]]
1177 +
1178 +
1179 +
1180 +
1181 += (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12. Trouble Shooting(%%) =
1182 +
1183 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)12.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1184 +
833 833  [[image:image-20220920135918-1.png]]
834 834  
835 835  
... ... @@ -845,7 +845,7 @@
845 845  [[image:image-20220920141936-2.png]]
846 846  
847 847  
848 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1200 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
849 849  
850 850  
851 851  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -853,13 +853,13 @@
853 853  [[image:image-20230508171607-1.png]]
854 854  
855 855  
856 -== 9.3  Fallback IP does not work, how can users check ==
1208 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
857 857  
858 858  
859 859  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
860 860  
861 861  
862 -**1.Check whether the configuration is correct**
1214 +**~1. Check whether the configuration is correct**
863 863  
864 864  Run the CMD command to ipconfig and ping 172.31.255.254.
865 865  
... ... @@ -875,7 +875,7 @@
875 875  If the firewall is not down, this will affect access to the gateway.
876 876  
877 877  
878 -== 9.4  Click "Manual_Update", why there is no response? ==
1230 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
879 879  
880 880  
881 881  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -884,21 +884,20 @@
884 884  [[image:image-20230527090555-3.png||height="660" width="832"]]
885 885  
886 886  
887 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
1239 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
888 888  
889 889  
890 890  Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
891 891  
892 -
893 893  (% class="box infomessage" %)
894 894  (((
895 -apt update && apt install dragino-fallback
1246 +apt update && apt install *dragino*
896 896  
897 897  wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
898 898  )))
899 899  
900 900  
901 -== 9.6  How to clear data from the built-in server ==
1252 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
902 902  
903 903  
904 904  **1) Build-in The Things Network**
... ... @@ -910,10 +910,14 @@
910 910  
911 911  **2) Build-in Chirpstack**
912 912  
1264 +Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
913 913  
914 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1266 +[[image:image-20231106180846-5.png||height="310" width="668"]]
915 915  
916 916  
1269 += (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)13. Supports(%%) =
1270 +
1271 +
917 917  (((
918 918  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
919 919  )))
... ... @@ -922,17 +922,16 @@
922 922  With your question as detailed as possible. We will reply and help you in the shortest.
923 923  
924 924  
925 -= 11. Reference =
1280 += (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)14. Reference(%%) =
926 926  
927 927  
928 928  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
929 929  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
930 930  
931 -
932 932  
933 933  )))
934 934  
935 -= 12. Order Info =
1289 += (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)15. Order Info(%%) =
936 936  
937 937  
938 938  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -964,7 +964,7 @@
964 964  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
965 965  
966 966  
967 -= 13. Manufacturer Info =
1321 += (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)16. Manufacturer Info(%%) =
968 968  
969 969  
970 970  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -974,7 +974,7 @@
974 974  LongCheng Street, LongGang District ; Shenzhen 518116,China
975 975  
976 976  
977 -= 14. FCC Warning =
1331 += (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)17. FCC Warning(%%) =
978 978  
979 979  
980 980  (((
image-20231017111606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +71.7 KB
Content
image-20240803095144-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.0 KB
Content
image-20240831151427-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.2 KB
Content
image-20240831152113-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +62.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0