Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 244.1 >
edited by Kilight Cao
on 2023/07/31 17:11
To version < 115.1 >
edited by Xiaoye
on 2022/11/21 11:13
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,18 +57,17 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
70 70  
70 +== **1.3 Features** ==
71 71  
72 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -81,86 +81,73 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
85 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
86 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
88 88  
89 +== **1.4 Block Diagram** ==
89 89  
90 -LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
93 +== **1.5 LED Indicators** ==
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
96 +LPS8-V2 has totally four LEDs, They are:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
99 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
101 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
103 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
106 106  
105 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
107 107  
108 -== 1.5 Button Intruction ==
107 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
109 109  
109 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
110 110  
111 -LPS8-V2 has a black toggle button, which is:
111 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
112 112  
113 113  
114 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
115 +== **1.6 Button Intruction** ==
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
118 +LPS8-V2 has a black toggle button, which is:
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
121 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123 123  
124 -(% style="color:red" %)**Note**: Restoring factory Settings does not erase data from the LPS8-V2 built-in server
123 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
125 125  
126 -See this link for steps on how to clear data from the built-in server:
127 127  
128 -**[[How to clear data from the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtocleardatafromthebuilt-inserver]]**
126 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
129 129  
128 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
130 130  
131 -= 2. Quick Start =
132 132  
133 133  
132 += **2. Quick Start** =
133 +
134 +
134 134  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
135 135  
136 136  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
137 137  
138 138  
139 -== 2.1 Access and Configure LPS8-V2 ==
140 140  
141 -=== 2.1.1 Find IP address of LPS8-V2 ===
141 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
142 142  
143 143  
144 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
144 +== **2.1.1 connect the network.** ==
145 145  
146 146  
147 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
147 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
148 148  
149 -(% style="background-color:yellow" %)**dragino+dragino**
150 150  
151 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
152 -
153 -[[image:image-20230527084515-1.png]]
154 -
155 -[[image:image-20230527085250-2.png||height="495" width="284"]]
156 -
157 -
158 -
159 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
160 -
161 -
162 162  (((
163 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
151 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
164 164  )))
165 165  
166 166  (((
... ... @@ -171,40 +171,9 @@
171 171  
172 172  
173 173  
174 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
162 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
175 175  
176 176  
177 -[[image:image-20230107084650-2.png||height="310" width="839"]]
178 -
179 -
180 -(% style="color:blue" %)**Steps to connect via fallback IP:**
181 -
182 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
183 -
184 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
185 -
186 -
187 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
188 -
189 -
190 -As in the below photo:
191 -
192 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
193 -
194 -
195 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
196 -
197 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
198 -
199 -
200 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
201 -
202 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
203 -
204 -
205 -
206 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
207 -
208 208  [[image:image-20220622100542-2.png||height="369" width="1256"]]
209 209  
210 210  
... ... @@ -224,104 +224,13 @@
224 224  [[image:image-20220622102901-8.png||height="476" width="938"]]
225 225  
226 226  
227 -=== 2.1.2 Access Configure Web UI ===
228 228  
185 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
229 229  
230 -**Web Interface**
231 231  
232 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
188 +=== **2.2.1 Select your area frequency** ===
233 233  
234 234  
235 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
236 -
237 -You will see the login interface of LPS8-V2 as shown below.
238 -
239 -The account details for Web Login are:
240 -
241 -(% style="color:blue" %)**User Name: root**
242 -
243 -(% style="color:blue" %)**Password:   dragino**
244 -
245 -[[image:image-20230106153501-1.png||height="367" width="894"]]
246 -
247 -
248 -== 2.2  Typical Network Setup ==
249 -
250 -=== 2.2.1  Overview ===
251 -
252 -
253 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
254 -
255 -* **WAN Port Internet Mode**
256 -
257 -* **WiFi Client Mode**
258 -
259 -* **Cellular Mode**
260 -
261 -=== 2.2.2  Use WAN port to access Internet ===
262 -
263 -
264 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
265 -
266 -
267 -[[image:image-20230411100633-2.png||height="501" width="935"]]
268 -
269 -
270 -=== 2.2.3  Access the Internet as a WiFi Client ===
271 -
272 -
273 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
274 -
275 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
276 -
277 -[[image:image-20230411095739-1.png||height="264" width="691"]]
278 -
279 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
280 -
281 -
282 -=== 2.2.4  Use built-in 4G modem for internet access ===
283 -
284 -
285 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
286 -
287 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
288 -
289 -
290 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
291 -
292 -First, install the Micro SIM card as below direction
293 -
294 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
295 -
296 -
297 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
298 -
299 -
300 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
301 -
302 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
303 -
304 -
305 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
306 -
307 -
308 -=== 2.2.5  Check Internet connection ===
309 -
310 -
311 -In the **home** page, we can check the Internet connection.
312 -
313 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
314 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
315 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
316 -
317 -[[image:image-20230411101534-3.png||height="544" width="942"]]
318 -
319 -
320 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
321 -
322 -=== 2.3.1 Select your area frequency ===
323 -
324 -
325 325  (((
326 326  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
327 327  
... ... @@ -331,9 +331,10 @@
331 331  [[image:image-20220622103332-9.png||height="485" width="938"]]
332 332  
333 333  
334 -=== 2.3.2 Get the only gateway EUI ===
335 335  
201 +=== **2.2.2 Get the only gateway EUI** ===
336 336  
203 +
337 337  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
338 338  
339 339  
... ... @@ -355,9 +355,10 @@
355 355  [[image:image-20220622103956-12.png]]
356 356  
357 357  
358 -=== 2.3.3 Register the gateway to The Things Network ===
359 359  
226 +== **2.2.3 Register the gateway to The Things Network** ==
360 360  
228 +
361 361  **Login to The Things Network**
362 362  
363 363  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -371,30 +371,34 @@
371 371  **Get it online**
372 372  
373 373  
374 -= 3. Web Configure Pages =
375 375  
376 -== 3.1 Home ==
243 += **3. Web Configure Pages** =
377 377  
378 378  
379 -Shows the system running status:
246 +== **3.1 Home** ==
380 380  
248 +
249 +//Shows the system running status~://
250 +
381 381  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
382 382  
383 383  
384 -== 3.2 LoRa Settings ==
385 385  
386 -=== 3.2.1 LoRa ~-~-> LoRa ===
255 +== **3.2 LoRa Settings** ==
387 387  
388 388  
389 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
258 +=== **3.2.1 LoRa ~-~-> LoRa** ===
390 390  
391 -Different LPS8v2 hardware versions can support different frequency ranges:
392 392  
393 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
394 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
261 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
395 395  
263 +//Different LPS8v2 hardware versions can support different frequency ranges~://
264 +
265 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
266 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
267 +
396 396  (% class="wikigeneratedid" %)
397 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
269 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
398 398  
399 399  
400 400  (% class="wikigeneratedid" %)
... ... @@ -406,23 +406,26 @@
406 406  )))
407 407  
408 408  
409 -== 3.3 LoRaWAN Settings ==
410 410  
411 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
282 +== **3.3 LoRaWAN Settings** ==
412 412  
413 413  
414 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
285 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
415 415  
416 416  
288 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
289 +
290 +
417 417  [[image:image-20220616111932-2.png||height="516" width="672"]]
418 418  
419 419  
420 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
421 421  
295 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
422 422  
423 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
424 424  
298 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
425 425  
300 +
426 426  [[image:image-20220616113246-3.png||height="396" width="672"]]
427 427  
428 428  
... ... @@ -431,154 +431,97 @@
431 431  )))
432 432  
433 433  
434 -== 3.4 Network Settings ==
435 435  
436 -=== 3.4.1 Network ~-~-> WiFi ===
310 +== **3.4 Network Settings** ==
437 437  
438 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
439 439  
440 -[[image:image-20230619095946-1.png||height="332" width="827"]]
313 +=== **3.4.1 Network ~-~-> WiFi** ===
441 441  
442 442  
443 -=== 3.4.2 Network ~-~-> System Status ===
316 +[[image:image-20220616114756-4.png||height="251" width="669"]]
444 444  
445 445  
446 -[[image:image-20220820134112-2.png||height="539" width="668"]]
447 447  
320 +=== **3.4.2 Network ~-~-> System Status** ===
448 448  
449 -=== 3.4.3 Network ~-~-> Network ===
450 450  
323 +[[image:image-20220820134112-2.png||height="539" width="668"]]
451 451  
452 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
453 453  
454 -[[image:image-20230214093657-2.png||height="333" width="858"]]
455 455  
327 +=== **3.4.3 Network ~-~-> Firewall** ===
456 456  
457 -=== 3.4.4 Network ~-~-> Cellular ===
458 458  
330 +[[image:image-20220616115351-6.png||height="244" width="661"]]
459 459  
460 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
461 461  
462 -(% style="color:red" %)**Note: APN cannot be empty.**
463 463  
464 -[[image:image-20230228115126-1.png]]
334 +== **3.5 System** ==
465 465  
466 466  
467 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
337 +=== **3.5.1  System ~-~-> System Overview** ===
468 468  
469 -[[image:image-20230228115535-2.png||height="478" width="888"]]
470 470  
471 -
472 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
473 -
474 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
475 -
476 -
477 -== 3.5 System ==
478 -
479 -=== 3.5.1 System ~-~-> System Overview ===
480 -
481 -
482 482  Shows the system info:
483 483  
484 484  [[image:image-20220917144512-5.png||height="618" width="853"]]
485 485  
486 486  
487 -=== 3.5.2 System ~-~-> System General ===
488 488  
346 +=== **3.5.2 System ~-~-> Backup/Restore** ===
489 489  
490 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
491 491  
492 -In addition, Users can customize the FallBack IP address.
493 -
494 -[[image:image-20230214094058-3.png]]
495 -
496 -
497 -=== 3.5.3 System ~-~-> Backup/Restore ===
498 -
499 -
500 500  [[image:image-20220917144725-6.png||height="208" width="869"]]
501 501  
502 502  
503 -=== 3.5.4 System ~-~-> Remoteit ===
504 504  
353 += **4. Build-in Server** =
505 505  
506 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
507 507  
356 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
508 508  
509 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
510 510  
511 -[[image:image-20221230092303-2.png]]
359 +[[image:image-20220820115644-1.png||height="217" width="778"]]
512 512  
513 513  
514 -=== 3.5.5 System ~-~-> Package Management ===
515 -
516 -
517 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
518 -
519 -[[image:image-20230214094316-4.png]]
520 -
521 -
522 -= 4. Build-in Server =
523 -
524 -
525 -Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
526 -
527 -[[image:image-20230616175617-8.png||height="390" width="894"]]
528 -
529 -[[image:image-20230616175558-7.png||height="362" width="894"]]
530 -
531 -
532 -
533 533  (% style="color:red" %)**Note:**
534 534  
535 - **Path**: Server ~-~-> Network Server
364 + **Path**: System ~-~-> Built-in Server
536 536  
537 - Server ~-~-> Application Server
538 538  
539 -
540 540  **Troubleshooting:**
541 541  
542 542  
543 543  **~ 1. URL does not jump properly**
544 544  
545 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
372 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
546 546  
547 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
374 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
548 548  
549 549  
550 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
551 551  
378 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
552 552  
553 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
554 554  
381 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
382 +
555 555  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
556 556  
557 557  
558 558  Login account:
559 559  
560 -**Username : ** (% style="background-color:yellow" %)**admin**
388 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
561 561  
562 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
390 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
563 563  
564 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
565 565  
393 +[[image:image-20220725171719-1.png||height="570" width="769"]]
566 566  
567 567  
568 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
569 569  
397 +== **4.2 Application Server ~-~- Node-Red** ==
570 570  
571 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
572 572  
573 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
574 -
575 -[[image:image-20230321092456-1.png]]
576 -
577 -
578 -
579 -== 4.2 Application Server ~-~- Node-Red ==
580 -
581 -
582 582  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
583 583  
584 584  
... ... @@ -589,103 +589,18 @@
589 589  
590 590  
591 591  
592 -=== **Using Node-Red, InfluxDB and Grafana** ===
593 593  
594 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
595 595  
412 += **5. How users can access LPS8v2 using serial USB** =
596 596  
597 -the users can refer to this link to install them.
598 598  
599 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
415 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
600 600  
601 601  
602 -=== **Upgrade the node.js** ===
418 +Port 1 of the UART on the LPS8v2 is GND
603 603  
604 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
605 -
606 -
607 -the users can refer to this link to upgrade them.
608 -
609 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
610 -
611 -
612 -== 4.3 How to disable the built-in server ==
613 -
614 -
615 -Use the following commands to start and stop the TTNv3 service:
616 -
617 617  (% class="box infomessage" %)
618 618  (((
619 -**# start**
620 -systemctl start ttnstack
621 -
622 -**# stop**
623 -systemctl stop ttnstack
624 -
625 -**# enable**
626 -systemctl enable ttnstack
627 -
628 -**#disable**
629 -systemctl disable ttnstack
630 -)))
631 -
632 -Use the following commands to start and stop the Node-Red service:
633 -
634 -(% class="box infomessage" %)
635 -(((
636 -**# start**
637 -systemctl start nodered
638 -
639 -**# stop**
640 -systemctl stop nodered
641 -
642 -**# enable**
643 -systemctl enable nodered
644 -
645 -**#disable**
646 -systemctl disable nodered
647 -)))
648 -
649 -
650 -== 4.4 How to use ChirpStack on LPS8-V2 ==
651 -
652 -
653 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
654 -
655 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
656 -
657 -
658 -=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
659 -
660 -
661 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
662 -
663 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
664 -
665 -[[image:image-20230602140406-3.png||height="480" width="918"]]
666 -
667 -
668 -When the configuration is complete, click** "Save&Apply"**.
669 -
670 -
671 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
672 -
673 -[[image:image-20230602143122-4.png||height="511" width="983"]]
674 -
675 -
676 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
677 -
678 -
679 -
680 -= 6. How users can access LPS8-V2 using serial USB =
681 -
682 -
683 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
684 -
685 -Port 1 of the UART on the LPS8-V2 is GND
686 -
687 -(% class="box infomessage" %)
688 -(((
689 689  **TXD  <~-~--> UART RXD (Gray line)**
690 690  
691 691  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -693,10 +693,13 @@
693 693  **GND <~-~--> GND (Black line)**
694 694  )))
695 695  
429 +
696 696  **LPS8v2 UART connection photo**
697 697  
698 -[[image:image-20230421094319-2.png||height="351" width="392"]]
432 +[[image:image-20220804163015-1.png||height="621" width="466"]]
699 699  
434 +
435 +
700 700  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
701 701  
702 702  
... ... @@ -706,127 +706,111 @@
706 706  [[image:image-20220804164747-2.png||height="622" width="594"]]
707 707  
708 708  
709 -= 7. OTA System Update =
710 710  
446 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
711 711  
712 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
713 713  
449 +== **Step 1: Configure Frequency Band** ==
714 714  
715 -== 7.1 Auto-update method ==
716 716  
452 +//Each country has a requirement for frequency region. Choose the right one for your area.//
717 717  
718 -The default, each gateway will enable the auto-update function.
454 +[[image:image-20220905164308-1.png]]
719 719  
720 -this function will be triggered every boot and every midnight.
721 721  
722 722  
723 -Users can enable/disable it via Web Page
458 +== **Step 2: Configure the forward address** ==
724 724  
725 -[[image:image-20230607094447-2.png]]
726 726  
461 +**Select one of the servers to configure.**
727 727  
728 -== 7.2 Manual upgrade method ==
463 +**For example:**
729 729  
465 +[[image:image-20220905164847-2.png]]
730 730  
731 -1). Using the Linux command to upgrade the system
732 732  
733 733  
734 -(% class="box infomessage" %)
735 -(((
736 -**apt update && apt install *dragino***
737 -)))
469 +== **Step 3: Download and Install the Helium-gateway-rs** ==
738 738  
739 739  
740 -2). Upgrade the system via the Web page button of "Manual Update"
472 +**Access the gateway CLI via SSH.**
741 741  
474 +[[image:image-20220905165222-3.png]]
742 742  
743 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
744 744  
745 -[[image:image-20230607093849-1.png]]
477 +**Download gateway-rs.**
746 746  
479 +[[image:image-20220905165715-5.png]]
747 747  
481 +(% class="box infomessage" %)
482 +(((
483 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
484 +)))
748 748  
749 -= 8. FAQ =
750 750  
751 -== 8.1 How to change Hostname ==
487 +**Install gateway-rs.**
752 752  
489 +[[image:image-20220905165917-7.png]]
753 753  
754 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
755 -
756 756  (% class="box infomessage" %)
757 757  (((
758 -hostnamectl set-hostname dragino-123456
493 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
759 759  )))
760 760  
761 -[[image:image-20230517102429-1.png]]
762 762  
763 -After the configuration is complete, run "reboot" to restart the gateway.
497 +**Modify configuration.**
764 764  
765 765  
766 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
500 +[[image:image-20220905173847-12.png]]
767 767  
768 768  
769 -Migrate guide:
503 +(% class="box infomessage" %)
504 +(((
505 +**region=<Enter regional parameters> \
506 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
507 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
508 +)))
770 770  
771 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
772 772  
773 -**2. On the Server ~-~-> Network Server interface, click "Management"**
511 +**Restart the helium_gateway**
774 774  
775 -[[image:image-20230616162454-1.png]]
513 +[[image:image-20220905170920-9.png]]
776 776  
777 777  
778 -**3. Click "Migrate-Chirpstack"**
516 +(% class="box infomessage" %)
517 +(((
518 +**systemctl restart helium_gateway**
519 +)))
779 779  
780 -[[image:image-20230616162742-2.png]]
781 781  
522 +**Check the helium_gateway Log：**
782 782  
783 -**4. Strat Install **
524 +[[image:image-20220905173952-13.png]]
784 784  
785 -Click start Install and wait until the migration succeeds
786 786  
787 -[[image:image-20230616162934-3.png]]
527 +(% class="box infomessage" %)
528 +(((
529 +**journalctl -u helium_gateway -f**
530 +)))
788 788  
789 789  
790 -**5.Migration complete check result**
533 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
791 791  
792 -[[image:image-20230616174526-4.png||height="706" width="983"]]
535 +where the helium gateway log is shown:
793 793  
537 +[[image:image-20220905174534-14.png]]
794 794  
795 -[[image:image-20230616180004-9.png]]
796 796  
540 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
797 797  
798 -== 8.3 How to reduce the 4g data consumed ==
799 799  
800 800  
801 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
544 += **7. Trouble Shooting** =
802 802  
803 -[[image:image-20230719100239-1.png||height="724" width="994"]]
804 804  
547 +== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
805 805  
806 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
807 807  
808 -[[image:image-20230719100332-2.png]]
809 -
810 -
811 -3. Disable the auto-update:
812 -
813 -[[image:image-20230719100419-3.png||height="458" width="995"]]
814 -
815 -
816 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
817 -
818 -
819 -(% class="box infomessage" %)
820 -(((
821 -apt update && apt install helium-gateway
822 -)))
823 -
824 -
825 -= 9. Trouble Shooting =
826 -
827 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
828 -
829 -
830 830  [[image:image-20220920135918-1.png]]
831 831  
832 832  
... ... @@ -842,84 +842,21 @@
842 842  [[image:image-20220920141936-2.png]]
843 843  
844 844  
845 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
846 846  
847 847  
848 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
567 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
849 849  
850 -[[image:image-20230508171607-1.png]]
851 851  
852 -
853 -== 9.3  Fallback IP does not work, how can users check ==
854 -
855 -
856 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
857 -
858 -
859 -**1.Check whether the configuration is correct**
860 -
861 -Run the CMD command to ipconfig and ping 172.31.255.254.
862 -
863 -If this fails, the user needs to reconfigure.
864 -
865 -[[image:image-20230413170224-3.png||height="433" width="707"]]
866 -
867 -[[image:image-20230413170246-4.png]]
868 -
869 -
870 -**2. Check whether the firewall is disabled**
871 -
872 -If the firewall is not down, this will affect access to the gateway.
873 -
874 -
875 -== 9.4  Click "Manual_Update", why there is no response? ==
876 -
877 -
878 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
879 -
880 -
881 -[[image:image-20230527090555-3.png||height="660" width="832"]]
882 -
883 -
884 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
885 -
886 -
887 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
888 -
889 -
890 -(% class="box infomessage" %)
891 891  (((
892 -apt update && apt install dragino-fallback
893 -
894 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
571 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
895 895  )))
896 896  
897 -
898 -== 9.6  How to clear data from the built-in server ==
899 -
900 -
901 -**1) Build-in The Things Network**
902 -
903 -Refer to this link to delete the Built-in server's device.
904 -
905 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
906 -
907 -
908 -**2) Build-in Chirpstack**
909 -
910 -
911 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
912 -
913 -
914 914  (((
915 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
916 -)))
575 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
917 917  
918 -(((
919 -With your question as detailed as possible. We will reply and help you in the shortest.
920 920  
921 921  
922 -= 11. Reference =
579 += **9. Reference** =
923 923  
924 924  
925 925  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -928,7 +928,7 @@
928 928  
929 929  )))
930 930  
931 -= 12. Order Info =
588 += **10. Order Info** =
932 932  
933 933  
934 934  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -936,33 +936,26 @@
936 936  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
937 937  
938 938  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
939 -
940 940  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
941 -
942 942  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
943 -
944 944  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
945 -
946 946  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
947 -
948 948  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
949 949  
950 950  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
951 951  
952 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
604 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
605 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
606 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
607 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
953 953  
954 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
955 -
956 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
957 -
958 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
959 -
960 960  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
961 961  
962 962  
963 -= 13. Manufacturer Info =
964 964  
613 += **10. Manufacturer Info** =
965 965  
615 +
966 966  **Shenzhen Dragino Technology Development co. LTD**
967 967  
968 968  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -970,9 +970,10 @@
970 970  LongCheng Street, LongGang District ; Shenzhen 518116,China
971 971  
972 972  
973 -= 14. FCC Warning =
974 974  
624 += **11. FCC Warning** =
975 975  
626 +
976 976  (((
977 977  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
978 978  )))
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0