Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 244.1 >
edited by Kilight Cao
on 2023/07/31 17:11
To version < 103.9 >
edited by Xiaoling
on 2022/09/08 18:08
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,16 +57,14 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
69 +== **1.3 Features** ==
70 70  
71 71  
72 72  * Open Source Debian system
... ... @@ -81,31 +81,35 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
87 +== **1.4 Block Diagram** ==
88 88  
89 89  
90 +
91 +== **1.5 LED Indicators** ==
92 +
93 +
90 90  LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
97 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
99 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This RGB LED will blink GREEN when the ETH port is connecting//
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
101 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
107 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
109 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
106 106  
107 107  
108 -== 1.5 Button Intruction ==
112 +== **1.6 Button Intruction** ==
109 109  
110 110  
111 111  LPS8-V2 has a black toggle button, which is:
... ... @@ -113,54 +113,33 @@
113 113  
114 114  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
120 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
123 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
125 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
122 122  
127 += **2. Quick Start** =
123 123  
124 -(% style="color:red" %)**Note**: Restoring factory Settings does not erase data from the LPS8-V2 built-in server
125 125  
126 -See this link for steps on how to clear data from the built-in server:
127 -
128 -**[[How to clear data from the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtocleardatafromthebuilt-inserver]]**
129 -
130 -
131 -= 2. Quick Start =
132 -
133 -
134 134  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
135 135  
136 136  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
137 137  
138 138  
139 -== 2.1 Access and Configure LPS8-V2 ==
140 140  
141 -=== 2.1.1 Find IP address of LPS8-V2 ===
136 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
142 142  
143 143  
144 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
139 +== **2.1.1 connect the network.** ==
145 145  
146 146  
147 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
142 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
148 148  
149 -(% style="background-color:yellow" %)**dragino+dragino**
150 150  
151 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
152 -
153 -[[image:image-20230527084515-1.png]]
154 -
155 -[[image:image-20230527085250-2.png||height="495" width="284"]]
156 -
157 -
158 -
159 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
160 -
161 -
162 162  (((
163 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
146 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
164 164  )))
165 165  
166 166  (((
... ... @@ -171,43 +171,34 @@
171 171  
172 172  
173 173  
174 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
157 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
175 175  
176 176  
177 -[[image:image-20230107084650-2.png||height="310" width="839"]]
160 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
178 178  
179 179  
180 -(% style="color:blue" %)**Steps to connect via fallback IP:**
163 +(((
164 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
165 +)))
181 181  
182 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
183 183  
184 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
185 185  
169 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
186 186  
187 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
171 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
188 188  
173 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
189 189  
190 -As in the below photo:
191 191  
192 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
176 +[[image:image-20220622101433-4.png]]
193 193  
194 194  
195 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
179 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
196 196  
197 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
198 198  
182 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
199 199  
200 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
201 201  
202 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
203 -
204 -
205 -
206 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
207 -
208 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
209 -
210 -
211 211  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
212 212  
213 213  
... ... @@ -221,107 +221,16 @@
221 221  [[image:image-20220622102847-7.png]]
222 222  
223 223  
224 -[[image:image-20220622102901-8.png||height="476" width="938"]]
198 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
225 225  
226 226  
227 -=== 2.1.2 Access Configure Web UI ===
228 228  
202 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
229 229  
230 -**Web Interface**
231 231  
232 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
205 +=== **2.2.1 Select your area frequency** ===
233 233  
234 234  
235 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
236 -
237 -You will see the login interface of LPS8-V2 as shown below.
238 -
239 -The account details for Web Login are:
240 -
241 -(% style="color:blue" %)**User Name: root**
242 -
243 -(% style="color:blue" %)**Password:   dragino**
244 -
245 -[[image:image-20230106153501-1.png||height="367" width="894"]]
246 -
247 -
248 -== 2.2  Typical Network Setup ==
249 -
250 -=== 2.2.1  Overview ===
251 -
252 -
253 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
254 -
255 -* **WAN Port Internet Mode**
256 -
257 -* **WiFi Client Mode**
258 -
259 -* **Cellular Mode**
260 -
261 -=== 2.2.2  Use WAN port to access Internet ===
262 -
263 -
264 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
265 -
266 -
267 -[[image:image-20230411100633-2.png||height="501" width="935"]]
268 -
269 -
270 -=== 2.2.3  Access the Internet as a WiFi Client ===
271 -
272 -
273 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
274 -
275 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
276 -
277 -[[image:image-20230411095739-1.png||height="264" width="691"]]
278 -
279 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
280 -
281 -
282 -=== 2.2.4  Use built-in 4G modem for internet access ===
283 -
284 -
285 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
286 -
287 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
288 -
289 -
290 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
291 -
292 -First, install the Micro SIM card as below direction
293 -
294 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
295 -
296 -
297 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
298 -
299 -
300 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
301 -
302 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
303 -
304 -
305 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
306 -
307 -
308 -=== 2.2.5  Check Internet connection ===
309 -
310 -
311 -In the **home** page, we can check the Internet connection.
312 -
313 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
314 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
315 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
316 -
317 -[[image:image-20230411101534-3.png||height="544" width="942"]]
318 -
319 -
320 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
321 -
322 -=== 2.3.1 Select your area frequency ===
323 -
324 -
325 325  (((
326 326  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
327 327  
... ... @@ -328,16 +328,17 @@
328 328  
329 329  )))
330 330  
331 -[[image:image-20220622103332-9.png||height="485" width="938"]]
214 +[[image:image-20220622103332-9.png]]
332 332  
333 333  
334 -=== 2.3.2 Get the only gateway EUI ===
335 335  
218 +=== **2.2.2 Get the only gateway EUI** ===
336 336  
220 +
337 337  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
338 338  
339 339  
340 -[[image:image-20220622103355-10.png||height="698" width="949"]]
224 +[[image:image-20220622103355-10.png]]
341 341  
342 342  
343 343  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
... ... @@ -355,9 +355,10 @@
355 355  [[image:image-20220622103956-12.png]]
356 356  
357 357  
358 -=== 2.3.3 Register the gateway to The Things Network ===
359 359  
243 +== **2.2.3 Register the gateway to The Things Network** ==
360 360  
245 +
361 361  **Login to The Things Network**
362 362  
363 363  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -371,30 +371,32 @@
371 371  **Get it online**
372 372  
373 373  
374 -= 3. Web Configure Pages =
375 375  
376 -== 3.1 Home ==
260 += **3. Web Configure Pages** =
377 377  
378 378  
379 -Shows the system running status:
263 +== **3.1 Home** ==
380 380  
381 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
382 382  
266 +//Shows the system running status~://
383 383  
384 -== 3.2 LoRa Settings ==
385 385  
386 -=== 3.2.1 LoRa ~-~-> LoRa ===
387 387  
270 +== **3.2 LoRa Settings** ==
388 388  
389 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
390 390  
391 -Different LPS8v2 hardware versions can support different frequency ranges:
273 +=== **3.2.1 LoRa ~-~-> LoRa** ===
392 392  
393 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
394 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
395 395  
276 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
277 +
278 +//Different LPS8v2 hardware versions can support different frequency ranges~://
279 +
280 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
281 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
282 +
396 396  (% class="wikigeneratedid" %)
397 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
284 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
398 398  
399 399  
400 400  (% class="wikigeneratedid" %)
... ... @@ -406,23 +406,26 @@
406 406  )))
407 407  
408 408  
409 -== 3.3 LoRaWAN Settings ==
410 410  
411 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
297 +== **3.3 LoRaWAN Settings** ==
412 412  
413 413  
414 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
300 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
415 415  
416 416  
303 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
304 +
305 +
417 417  [[image:image-20220616111932-2.png||height="516" width="672"]]
418 418  
419 419  
420 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
421 421  
310 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
422 422  
423 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
424 424  
313 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
425 425  
315 +
426 426  [[image:image-20220616113246-3.png||height="396" width="672"]]
427 427  
428 428  
... ... @@ -431,157 +431,98 @@
431 431  )))
432 432  
433 433  
434 -== 3.4 Network Settings ==
435 435  
436 -=== 3.4.1 Network ~-~-> WiFi ===
325 +== **3.4 Network Settings** ==
437 437  
438 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
439 439  
440 -[[image:image-20230619095946-1.png||height="332" width="827"]]
328 +=== **3.4.1 Network ~-~-> WiFi** ===
441 441  
442 442  
443 -=== 3.4.2 Network ~-~-> System Status ===
331 +[[image:image-20220616114756-4.png||height="251" width="669"]]
444 444  
445 445  
446 -[[image:image-20220820134112-2.png||height="539" width="668"]]
447 447  
335 +=== **3.4.2 Network ~-~-> System Status** ===
448 448  
449 -=== 3.4.3 Network ~-~-> Network ===
450 450  
338 +[[image:image-20220820134112-2.png||height="539" width="668"]]
451 451  
452 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
453 453  
454 -[[image:image-20230214093657-2.png||height="333" width="858"]]
455 455  
342 +=== **3.4.3 Network ~-~-> Firewall** ===
456 456  
457 -=== 3.4.4 Network ~-~-> Cellular ===
458 458  
345 +[[image:image-20220616115351-6.png||height="244" width="661"]]
459 459  
460 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
461 461  
462 -(% style="color:red" %)**Note: APN cannot be empty.**
463 463  
464 -[[image:image-20230228115126-1.png]]
349 +== **3.5 System** ==
465 465  
466 466  
467 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
352 +=== **3.5.1  System ~-~-> System Overview** ===
468 468  
469 -[[image:image-20230228115535-2.png||height="478" width="888"]]
470 470  
471 -
472 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
473 -
474 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
475 -
476 -
477 -== 3.5 System ==
478 -
479 -=== 3.5.1 System ~-~-> System Overview ===
480 -
481 -
482 482  Shows the system info:
483 483  
484 -[[image:image-20220917144512-5.png||height="618" width="853"]]
485 485  
486 486  
487 -=== 3.5.2 System ~-~-> System General ===
359 +=== **3.5.2 System ~-~-> Backup/Restore** ===
488 488  
489 489  
490 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
362 +[[image:image-20220616115808-7.png||height="194" width="649"]]
491 491  
492 -In addition, Users can customize the FallBack IP address.
493 493  
494 -[[image:image-20230214094058-3.png]]
495 495  
366 += **4. Build-in Server** =
496 496  
497 -=== 3.5.3 System ~-~-> Backup/Restore ===
498 498  
369 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
499 499  
500 -[[image:image-20220917144725-6.png||height="208" width="869"]]
501 501  
372 +[[image:image-20220820115644-1.png]]
502 502  
503 -=== 3.5.4 System ~-~-> Remoteit ===
504 504  
505 -
506 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
507 -
508 -
509 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
510 -
511 -[[image:image-20221230092303-2.png]]
512 -
513 -
514 -=== 3.5.5 System ~-~-> Package Management ===
515 -
516 -
517 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
518 -
519 -[[image:image-20230214094316-4.png]]
520 -
521 -
522 -= 4. Build-in Server =
523 -
524 -
525 -Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
526 -
527 -[[image:image-20230616175617-8.png||height="390" width="894"]]
528 -
529 -[[image:image-20230616175558-7.png||height="362" width="894"]]
530 -
531 -
532 -
533 533  (% style="color:red" %)**Note:**
534 534  
535 - **Path**: Server ~-~-> Network Server
377 + **Path**: System ~-~-> Built-in Server
536 536  
537 - Server ~-~-> Application Server
538 538  
539 -
540 540  **Troubleshooting:**
541 541  
542 542  
543 543  **~ 1. URL does not jump properly**
544 544  
545 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
385 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
546 546  
547 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
387 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
548 548  
549 549  
550 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
551 551  
391 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
552 552  
553 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
554 554  
394 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
395 +
555 555  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
556 556  
557 557  
558 558  Login account:
559 559  
560 -**Username : ** (% style="background-color:yellow" %)**admin**
401 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
561 561  
562 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
403 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
563 563  
564 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
565 565  
406 +[[image:image-20220725171719-1.png||height="570" width="769"]]
566 566  
567 567  
568 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
569 569  
410 +== **4.2 Application Server ~-~- Node-Red** ==
570 570  
571 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
572 572  
573 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
413 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
574 574  
575 -[[image:image-20230321092456-1.png]]
576 576  
577 -
578 -
579 -== 4.2 Application Server ~-~- Node-Red ==
580 -
581 -
582 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
583 -
584 -
585 585  Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
586 586  
587 587  
... ... @@ -589,339 +589,148 @@
589 589  
590 590  
591 591  
592 -=== **Using Node-Red, InfluxDB and Grafana** ===
423 += **5. How users can access LPS8v2 using serial USB** =
593 593  
594 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
595 595  
426 +**USB TTL to LPS8v2  Connection:**
596 596  
597 -the users can refer to this link to install them.
428 +Port 1 of the UART on the LPS8v2 is GND
598 598  
599 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
600 -
601 -
602 -=== **Upgrade the node.js** ===
603 -
604 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
605 -
606 -
607 -the users can refer to this link to upgrade them.
608 -
609 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
610 -
611 -
612 -== 4.3 How to disable the built-in server ==
613 -
614 -
615 -Use the following commands to start and stop the TTNv3 service:
616 -
617 617  (% class="box infomessage" %)
618 618  (((
619 -**# start**
620 -systemctl start ttnstack
432 +TXD  <~-~--> UART RXD (Gray line)
621 621  
622 -**# stop**
623 -systemctl stop ttnstack
434 +RXD  <~-~--> UART TXD (White line)
624 624  
625 -**# enable**
626 -systemctl enable ttnstack
627 -
628 -**#disable**
629 -systemctl disable ttnstack
436 +GND <~-~--> GND (Black line)
630 630  )))
631 631  
632 -Use the following commands to start and stop the Node-Red service:
633 633  
634 -(% class="box infomessage" %)
635 -(((
636 -**# start**
637 -systemctl start nodered
440 +**LPS8v2 UART connection photo**
638 638  
639 -**# stop**
640 -systemctl stop nodered
442 +[[image:image-20220804163015-1.png||height="621" width="466"]]
641 641  
642 -**# enable**
643 -systemctl enable nodered
644 644  
645 -**#disable**
646 -systemctl disable nodered
647 -)))
648 648  
446 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
649 649  
650 -== 4.4 How to use ChirpStack on LPS8-V2 ==
651 651  
449 +[[image:image-20220804164928-3.png||height="320" width="332"]]
652 652  
653 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
654 654  
655 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
452 +[[image:image-20220804164747-2.png||height="622" width="594"]]
656 656  
657 657  
658 -=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
455 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
659 659  
660 660  
661 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
458 +== **Step 1: Configure Frequency Band** ==
662 662  
663 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
664 664  
665 -[[image:image-20230602140406-3.png||height="480" width="918"]]
461 +//Each country has a requirement for frequency region. Choose the right one for your area.//
666 666  
463 +[[image:image-20220905164308-1.png]]
667 667  
668 -When the configuration is complete, click** "Save&Apply"**.
669 669  
466 +== **Step 2: Configure the forward address** ==
670 670  
671 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
672 672  
673 -[[image:image-20230602143122-4.png||height="511" width="983"]]
469 +**Select one of the servers to configure.**
674 674  
471 +**For example:**
675 675  
676 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
473 +[[image:image-20220905164847-2.png]]
677 677  
678 678  
476 +== **Step 3: Download and Install the Helium-gateway-rs** ==
679 679  
680 -= 6. How users can access LPS8-V2 using serial USB =
681 681  
479 +**Access the gateway CLI via SSH.**
682 682  
683 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
481 +[[image:image-20220905165222-3.png]]
684 684  
685 -Port 1 of the UART on the LPS8-V2 is GND
686 686  
687 -(% class="box infomessage" %)
688 -(((
689 -**TXD  <~-~--> UART RXD (Gray line)**
484 +**Download gateway-rs.**
690 690  
691 -**RXD  <~-~--> UART TXD (White line)**
486 +[[image:image-20220905165715-5.png]]
692 692  
693 -**GND <~-~--> GND (Black line)**
488 +(% class="box infomessage" %)
489 +(((
490 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
694 694  )))
695 695  
696 -**LPS8v2 UART connection photo**
697 697  
698 -[[image:image-20230421094319-2.png||height="351" width="392"]]
494 +**Install gateway-rs.**
699 699  
700 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
496 +[[image:image-20220905165917-7.png]]
701 701  
702 -
703 -[[image:image-20220804164928-3.png||height="320" width="332"]]
704 -
705 -
706 -[[image:image-20220804164747-2.png||height="622" width="594"]]
707 -
708 -
709 -= 7. OTA System Update =
710 -
711 -
712 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
713 -
714 -
715 -== 7.1 Auto-update method ==
716 -
717 -
718 -The default, each gateway will enable the auto-update function.
719 -
720 -this function will be triggered every boot and every midnight.
721 -
722 -
723 -Users can enable/disable it via Web Page
724 -
725 -[[image:image-20230607094447-2.png]]
726 -
727 -
728 -== 7.2 Manual upgrade method ==
729 -
730 -
731 -1). Using the Linux command to upgrade the system
732 -
733 -
734 734  (% class="box infomessage" %)
735 735  (((
736 -**apt update && apt install *dragino***
500 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
737 737  )))
738 738  
739 739  
740 -2). Upgrade the system via the Web page button of "Manual Update"
504 +**Modify configuration.**
741 741  
742 742  
743 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
507 +[[image:image-20220905173847-12.png]]
744 744  
745 -[[image:image-20230607093849-1.png]]
746 746  
747 -
748 -
749 -= 8. FAQ =
750 -
751 -== 8.1 How to change Hostname ==
752 -
753 -
754 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
755 -
756 756  (% class="box infomessage" %)
757 757  (((
758 -hostnamectl set-hostname dragino-123456
512 +**region=<Enter regional parameters> \
513 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
514 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
759 759  )))
760 760  
761 -[[image:image-20230517102429-1.png]]
762 762  
763 -After the configuration is complete, run "reboot" to restart the gateway.
518 +**Restart the helium_gateway**
764 764  
520 +[[image:image-20220905170920-9.png]]
765 765  
766 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
767 767  
768 -
769 -Migrate guide:
770 -
771 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
772 -
773 -**2. On the Server ~-~-> Network Server interface, click "Management"**
774 -
775 -[[image:image-20230616162454-1.png]]
776 -
777 -
778 -**3. Click "Migrate-Chirpstack"**
779 -
780 -[[image:image-20230616162742-2.png]]
781 -
782 -
783 -**4. Strat Install **
784 -
785 -Click start Install and wait until the migration succeeds
786 -
787 -[[image:image-20230616162934-3.png]]
788 -
789 -
790 -**5.Migration complete check result**
791 -
792 -[[image:image-20230616174526-4.png||height="706" width="983"]]
793 -
794 -
795 -[[image:image-20230616180004-9.png]]
796 -
797 -
798 -== 8.3 How to reduce the 4g data consumed ==
799 -
800 -
801 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
802 -
803 -[[image:image-20230719100239-1.png||height="724" width="994"]]
804 -
805 -
806 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
807 -
808 -[[image:image-20230719100332-2.png]]
809 -
810 -
811 -3. Disable the auto-update:
812 -
813 -[[image:image-20230719100419-3.png||height="458" width="995"]]
814 -
815 -
816 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
817 -
818 -
819 819  (% class="box infomessage" %)
820 820  (((
821 -apt update && apt install helium-gateway
525 +**systemctl restart helium_gateway**
822 822  )))
823 823  
824 824  
825 -= 9. Trouble Shooting =
529 +**Check the helium_gateway Log：**
826 826  
827 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
531 +[[image:image-20220905173952-13.png]]
828 828  
829 829  
830 -[[image:image-20220920135918-1.png]]
831 -
832 -
833 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
834 -
835 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
836 -
837 -
838 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
839 -
840 -**Click the update URL button to configure the URL with the current eth port address.**
841 -
842 -[[image:image-20220920141936-2.png]]
843 -
844 -
845 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
846 -
847 -
848 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
849 -
850 -[[image:image-20230508171607-1.png]]
851 -
852 -
853 -== 9.3  Fallback IP does not work, how can users check ==
854 -
855 -
856 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
857 -
858 -
859 -**1.Check whether the configuration is correct**
860 -
861 -Run the CMD command to ipconfig and ping 172.31.255.254.
862 -
863 -If this fails, the user needs to reconfigure.
864 -
865 -[[image:image-20230413170224-3.png||height="433" width="707"]]
866 -
867 -[[image:image-20230413170246-4.png]]
868 -
869 -
870 -**2. Check whether the firewall is disabled**
871 -
872 -If the firewall is not down, this will affect access to the gateway.
873 -
874 -
875 -== 9.4  Click "Manual_Update", why there is no response? ==
876 -
877 -
878 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
879 -
880 -
881 -[[image:image-20230527090555-3.png||height="660" width="832"]]
882 -
883 -
884 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
885 -
886 -
887 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
888 -
889 -
890 890  (% class="box infomessage" %)
891 891  (((
892 -apt update && apt install dragino-fallback
893 -
894 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
536 +**journalctl -u helium_gateway -f**
895 895  )))
896 896  
897 897  
898 -== 9.6  How to clear data from the built-in server ==
540 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
899 899  
542 +where the helium gateway log is shown:
900 900  
901 -**1) Build-in The Things Network**
544 +[[image:image-20220905174534-14.png]]
902 902  
903 -Refer to this link to delete the Built-in server's device.
904 904  
905 -[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
547 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
906 906  
907 907  
908 -**2) Build-in Chirpstack**
550 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**7. Supports**(%%) =
909 909  
910 910  
911 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
912 -
913 -
914 914  (((
915 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
554 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
916 916  )))
917 917  
918 918  (((
919 -With your question as detailed as possible. We will reply and help you in the shortest.
558 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
920 920  
921 921  
922 -= 11. Reference =
923 923  
562 += **8. Reference** =
924 924  
564 +
925 925  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
926 926  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
927 927  
... ... @@ -928,7 +928,7 @@
928 928  
929 929  )))
930 930  
931 -= 12. Order Info =
571 += **9. Order Info** =
932 932  
933 933  
934 934  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -936,33 +936,26 @@
936 936  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
937 937  
938 938  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
939 -
940 940  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
941 -
942 942  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
943 -
944 944  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
945 -
946 946  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
947 -
948 948  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
949 949  
950 950  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
951 951  
952 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
587 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
588 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
589 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
590 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
953 953  
954 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
955 -
956 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
957 -
958 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
959 -
960 960  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
961 961  
962 962  
963 -= 13. Manufacturer Info =
964 964  
596 += **10. Manufacturer Info** =
965 965  
598 +
966 966  **Shenzhen Dragino Technology Development co. LTD**
967 967  
968 968  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -970,9 +970,10 @@
970 970  LongCheng Street, LongGang District ; Shenzhen 518116,China
971 971  
972 972  
973 -= 14. FCC Warning =
974 974  
607 += **11. FCC Warning** =
975 975  
609 +
976 976  (((
977 977  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
978 978  )))
Delete Device.docx
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0