Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 240.1 >
edited by Xiaoye
on 2023/07/31 15:17
To version < 297.4 >
edited by Xiaoling
on 2024/03/20 14:19
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 -- LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents：**
11 +**Table of Contents:**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -81,7 +81,7 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
84 +* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 87  == 1.4 LED Indicators ==
... ... @@ -96,11 +96,11 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
103 + ✓**  SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
... ... @@ -120,11 +120,19 @@
120 120  
121 121   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
123 -(% style="color:red" %)**Note**: Restoring factory Settings does not erase data from the built-in server
124 124  
125 -See this link for steps on how to clear data from the built-in server:
124 +(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
126 126  
126 +See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 127  
128 +
129 +When the gateway restores the factory settings is complete,
130 +
131 +The WiFi configuration will enable WiFi Access Point by default.
132 +
133 +The other configuration will be restored to the default configuration.
134 +
135 +
128 128  = 2. Quick Start =
129 129  
130 130  
... ... @@ -152,7 +152,6 @@
152 152  [[image:image-20230527085250-2.png||height="495" width="284"]]
153 153  
154 154  
155 -
156 156  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
157 157  
158 158  
... ... @@ -167,7 +167,6 @@
167 167  [[image:image-20220622100129-1.png||height="332" width="1263"]]
168 168  
169 169  
170 -
171 171  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
172 172  
173 173  
... ... @@ -191,7 +191,7 @@
191 191  
192 192  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
193 193  
194 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
200 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
195 195  
196 196  
197 197  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -199,7 +199,6 @@
199 199  [[image:image-20230111094247-2.png||height="619" width="1250"]]
200 200  
201 201  
202 -
203 203  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
204 204  
205 205  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -239,7 +239,7 @@
239 239  
240 240  (% style="color:blue" %)**Password:   dragino**
241 241  
242 -[[image:image-20230106153501-1.png||height="367" width="894"]]
247 +[[image:image-20240318160845-1.png]]
243 243  
244 244  
245 245  == 2.2  Typical Network Setup ==
... ... @@ -478,7 +478,7 @@
478 478  
479 479  Shows the system info:
480 480  
481 -[[image:image-20220917144512-5.png||height="618" width="853"]]
486 +[[image:image-20231031162854-1.png]]
482 482  
483 483  
484 484  === 3.5.2 System ~-~-> System General ===
... ... @@ -494,125 +494,118 @@
494 494  === 3.5.3 System ~-~-> Backup/Restore ===
495 495  
496 496  
497 -[[image:image-20220917144725-6.png||height="208" width="869"]]
502 +[[image:image-20231031162927-2.png]]
498 498  
504 +=== 3.5.4 System ~-~-> Reboot / Reset ===
499 499  
500 -=== 3.5.4 System ~-~-> Remoteit ===
506 +In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
501 501  
508 +ETH LED will SOLID BULE Until the restore is finished.
502 502  
503 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
510 +When the gateway restores the factory settings is complete,
504 504  
512 +The WiFi configuration will enable WiFi Access Point by default.
505 505  
506 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
514 +The other configuration will be restored to the default configuration.
507 507  
508 -[[image:image-20221230092303-2.png]]
516 +[[image:image-20240203172853-1.png||height="365" width="901"]]
509 509  
510 510  
511 -=== 3.5.5 System ~-~-> Package Management ===
519 +=== 3.5.5 System ~-~-> Remoteit ===
512 512  
513 513  
514 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
522 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
515 515  
516 -[[image:image-20230214094316-4.png]]
517 517  
525 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
518 518  
519 -= 4. Build-in Server =
527 +[[image:image-20221230092303-2.png]]
520 520  
521 521  
522 -Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
530 +=== 3.5.6 System ~-~-> Package Management ===
523 523  
524 -[[image:image-20230616175617-8.png||height="390" width="894"]]
525 525  
526 -[[image:image-20230616175558-7.png||height="362" width="894"]]
533 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
527 527  
535 +[[image:image-20230214094316-4.png]]
528 528  
529 529  
530 -(% style="color:red" %)**Note:**
538 += 4. Build-in Server =
531 531  
532 - **Path**: Server ~-~-> Network Server
540 +After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
533 533  
534 - Server ~-~-> Application Server
535 535  
543 +== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
536 536  
537 -**Troubleshooting:**
545 +[[image:image-20231106180816-4.png||height="416" width="896"]]
538 538  
547 +[[image:image-20231201165904-1.png||height="466" width="899"]]
539 539  
540 -**~ 1. URL does not jump properly**
549 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
541 541  
542 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
551 +For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
543 543  
544 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
545 545  
546 546  
547 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
555 +== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
548 548  
549 549  
550 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
558 +[[image:image-20230616175558-7.png||height="362" width="894"]]
551 551  
552 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
560 +[[image:image-20231201170355-2.png||height="536" width="899"]]
553 553  
562 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
554 554  
555 -Login account:
556 556  
557 -**Username : ** (% style="background-color:yellow" %)**admin**
558 558  
559 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
566 +== **3). Troubleshooting:** ==
560 560  
561 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
562 562  
569 +* (((
570 +=== ** If the URL does not jump properly.** ===
571 +)))
563 563  
573 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
564 564  
565 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
575 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
566 566  
567 567  
568 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
578 +* (((
579 +=== ** How to install InfluxDB, Garfana.** ===
580 +)))
569 569  
570 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
582 + The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
571 571  
572 -[[image:image-20230321092456-1.png]]
573 573  
585 +* (((
586 +=== ** How to upgrade the gateway node.js to the latest version.** ===
587 +)))
574 574  
589 + The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
575 575  
576 -== 4.2 Application Server ~-~- Node-Red ==
577 577  
592 +* (((
593 +=== ** How to batch register device on the built-in Chirpstack network server** ===
594 +)))
578 578  
579 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
596 + The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
580 580  
581 581  
582 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
599 +* (((
600 +=== ** Why my gateway is not Chirpstack?** ===
601 +)))
583 583  
603 + After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
584 584  
585 -[[image:image-20220725172124-3.png||height="610" width="843"]]
586 586  
606 +* (((
607 +=== ** How to disable the built-in server** ===
608 +)))
587 587  
588 -
589 -=== **Using Node-Red, InfluxDB and Grafana** ===
590 -
591 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
592 -
593 -
594 -the users can refer to this link to install them.
595 -
596 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
597 -
598 -
599 -=== **Upgrade the node.js** ===
600 -
601 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
602 -
603 -
604 -the users can refer to this link to upgrade them.
605 -
606 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
607 -
608 -
609 -== 4.3 How to disable the built-in server ==
610 -
611 -
612 -Use the following commands to start and stop the TTNv3 service:
613 -
614 614  (% class="box infomessage" %)
615 615  (((
612 +Use the following commands to start and stop the TTNv3 service:**     **
613 +
616 616  **# start**
617 617  systemctl start ttnstack
618 618  
... ... @@ -626,10 +626,10 @@
626 626  systemctl disable ttnstack
627 627  )))
628 628  
629 -Use the following commands to start and stop the Node-Red service:
630 -
631 631  (% class="box infomessage" %)
632 632  (((
629 +Use the following commands to start and stop the Node-Red service:
630 +
633 633  **# start**
634 634  systemctl start nodered
635 635  
... ... @@ -644,36 +644,40 @@
644 644  )))
645 645  
646 646  
647 -== 4.4 How to use ChirpStack on LPS8-V2 ==
645 +* (((
646 +=== ** How to choose the Chirpstack server frequency SubBand** ===
647 +)))
648 648  
649 +**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
649 649  
650 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
651 + Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
651 651  
652 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
653 653  
654 654  
655 -=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
656 +When the configuration is complete, click** "Save&Apply"**.
656 656  
657 657  
658 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
659 +(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
659 659  
660 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
661 661  
662 -[[image:image-20230602140406-3.png||height="480" width="918"]]
663 663  
664 += 5. Watch Dog =
664 664  
665 -When the configuration is complete, click** "Save&Apply"**.
666 666  
667 +LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
667 667  
668 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
669 +The uses can be via the below method to enable Watch Dog:
669 669  
670 -[[image:image-20230602143122-4.png||height="511" width="983"]]
671 +(% class="box infomessage" %)
672 +(((
673 +wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
674 +)))
671 671  
676 +[[image:image-20231124113209-1.png||height="470" width="1157"]]
672 672  
673 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
674 674  
675 -
676 -
677 677  = 6. How users can access LPS8-V2 using serial USB =
678 678  
679 679  
... ... @@ -727,7 +727,6 @@
727 727  
728 728  1). Using the Linux command to upgrade the system
729 729  
730 -
731 731  (% class="box infomessage" %)
732 732  (((
733 733  **apt update && apt install *dragino***
... ... @@ -736,13 +736,11 @@
736 736  
737 737  2). Upgrade the system via the Web page button of "Manual Update"
738 738  
740 +(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
739 739  
740 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
741 -
742 742  [[image:image-20230607093849-1.png]]
743 743  
744 744  
745 -
746 746  = 8. FAQ =
747 747  
748 748  == 8.1 How to change Hostname ==
... ... @@ -765,33 +765,26 @@
765 765  
766 766  Migrate guide:
767 767  
768 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
767 +To stabilize the completion of the migration, The users can migrate in one of the following ways
769 769  
770 -**2. On the Server ~-~-> Network Server interface, click "Management"**
769 +**Method 1. Using the Linux shell, **
771 771  
772 -[[image:image-20230616162454-1.png]]
771 +**Method 2. Flash a new image with the Chirpstack**
773 773  
774 774  
775 -**3. Click "Migrate-Chirpstack"**
774 +=== Method 1: Using the Linux shell ===
776 776  
777 -[[image:image-20230616162742-2.png]]
776 +(% class="box infomessage" %)
777 +(((
778 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
779 +)))
778 778  
779 779  
780 -**4. Strat Install **
782 +=== Method 2: Flash a new image ===
781 781  
782 -Click start Install and wait until the migration succeeds
784 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
783 783  
784 -[[image:image-20230616162934-3.png]]
785 785  
786 -
787 -**5.Migration complete check result**
788 -
789 -[[image:image-20230616174526-4.png||height="706" width="983"]]
790 -
791 -
792 -[[image:image-20230616180004-9.png]]
793 -
794 -
795 795  == 8.3 How to reduce the 4g data consumed ==
796 796  
797 797  
... ... @@ -819,11 +819,112 @@
819 819  )))
820 820  
821 821  
814 +== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
815 +
816 +
817 +By default, the LPS8v2's built-in server is ChirpStack v4,
818 +
819 +If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
820 +
821 +[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
822 +
823 +
824 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
825 +
826 +
827 +== 8.6 How do I view gateway logs ==
828 +
829 +=== 8.6.1 LoRaWAN Log: ===
830 +
831 +
832 +==== Semtech UDP Log : ====
833 +
834 +When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
835 +
836 +[[image:image-20231017112115-2.png||height="611" width="821"]]
837 +
838 +
839 +==== Station Log: ====
840 +
841 +When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
842 +
843 +[[image:image-20231017111606-1.png||height="622" width="821"]]
844 +
845 +
846 +=== 8.6.2  4G Log ===
847 +
848 +
849 +The user needs to access the Linux console of the gateway and enter the following command:
850 +
851 +(% class="box infomessage" %)
852 +(((
853 +cat /var/log/qmilog.txt
854 +)))
855 +
856 +[[image:image-20231017114417-3.png||height="543" width="679"]]
857 +
858 +
859 +=== 8.6.3 Dmesg Log ===
860 +
861 +
862 +Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
863 +
864 +[[image:image-20231017115330-5.png||height="565" width="740"]]
865 +
866 +
867 +=== 8.6.4 Record Log ===
868 +
869 +
870 +Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
871 +
872 +[[image:image-20231017115124-4.png||height="215" width="880"]]
873 +
874 +
875 +=== 8.6.5 View gateway logs via Linux Command ===
876 +
877 +
878 +**Semtech UDP Log :**
879 +
880 +(% class="box infomessage" %)
881 +(((
882 +**journalctl -u draginofwd -f**
883 +)))
884 +
885 +[[image:image-20231207144627-1.png||height="371" width="1017"]]
886 +
887 +
888 +**Station Log:**
889 +
890 +(% class="box infomessage" %)
891 +(((
892 +**tail -f /var/log/station.log **
893 +)))
894 +
895 +[[image:image-20231207144758-2.png||height="132" width="1022"]]
896 +
897 +
898 +**Dmesg Log:**
899 +
900 +(% class="box infomessage" %)
901 +(((
902 +**dmesg**
903 +)))
904 +
905 +[[image:image-20231207145210-3.png||height="310" width="1021"]]
906 +
907 +
908 +== 8.7 DIN Mount Reference: ==
909 +
910 +
911 +[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
912 +
913 +[[image:image-20240318095617-2.png]]
914 +
915 +
822 822  = 9. Trouble Shooting =
823 823  
824 824  == 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
825 825  
826 -
827 827  [[image:image-20220920135918-1.png]]
828 828  
829 829  
... ... @@ -853,7 +853,7 @@
853 853  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
854 854  
855 855  
856 -**1.Check whether the configuration is correct**
949 +**~1. Check whether the configuration is correct**
857 857  
858 858  Run the CMD command to ipconfig and ping 172.31.255.254.
859 859  
... ... @@ -883,16 +883,15 @@
883 883  
884 884  Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
885 885  
886 -
887 887  (% class="box infomessage" %)
888 888  (((
889 -apt update && apt install dragino-fallback
981 +apt update && apt install *dragino*
890 890  
891 891  wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
892 892  )))
893 893  
894 894  
895 -== 9.6  How to clear data from the built-in server ==
987 +== 9.6  How to reset the built-in server ==
896 896  
897 897  
898 898  **1) Build-in The Things Network**
... ... @@ -899,11 +899,16 @@
899 899  
900 900  Refer to this link to delete the Built-in server's device.
901 901  
994 +[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
902 902  
903 903  
904 904  **2) Build-in Chirpstack**
905 905  
999 +Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
906 906  
1001 +[[image:image-20231106180846-5.png||height="310" width="668"]]
1002 +
1003 +
907 907  = (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
908 908  
909 909  
image-20231017111606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0