Last modified by Kilight Cao on 2025/02/08 14:05
<
From version < 238.1 >
edited by Kilight Cao
on 2023/07/31 11:24
To version < 69.2 >
edited by Xiaoling
on 2022/07/28 16:38
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -13,39 +13,27 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 -(((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -)))
22 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
28 28  
29 -(((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 -)))
24 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
32 32  
33 -(((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 -)))
26 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
36 36  
37 -(((
38 38  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 -)))
40 40  
41 -(((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 -)))
30 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
34 +== **1.2 Specifications** ==
48 48  
36 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,18 +57,18 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
51 +* Work Temperature: -20 ~~ 65°C
52 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
70 70  
71 71  
57 +== **1.3 Features** ==
58 +
59 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -81,265 +81,120 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
72 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
73 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
88 88  
89 89  
90 -LPS8-V2 has totally four LEDs, They are:
91 91  
78 +== **1.4 Block Diagram** ==
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
81 +== **1.5 LED Indicators** ==
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
83 +LPS8-V2 has totally four LEDs, They are:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
86 +//**➢ Power LED**: This RED LED will be solid if the device is properly powered//
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
89 +//**➢ LoRa LED**: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
106 106  
107 107  
108 -== 1.5 Button Intruction ==
92 +//**➢ SYS LED**: This RGB LED will show different colors in different states~://
109 109  
94 +// ✓ SOLID BLUE: The device is alive with a LoRaWAN server connection.//
110 110  
111 -LPS8-V2 has a black toggle button, which is:
96 +// ✓ BLINKING BLUE: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
112 112  
98 +// ✓ SOLID RED: Device doesn’t have an Internet connection.//
113 113  
114 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
101 +//**➢ ETH LED**: This LED shows the ETH interface connection status.//
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
104 += **2. Quick Start** =
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 -
123 -(% style="color:red" %)**Note**: Restoring factory Settings does not erase data from the built-in server
124 -
125 -See this link for steps on how to clear data from the built-in server:
126 -
127 -
128 -= 2. Quick Start =
129 -
130 -
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Access and Configure LPS8-V2 ==
111 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
137 137  
138 -=== 2.1.1 Find IP address of LPS8-V2 ===
139 139  
114 +== **2.1.1 connect the network.** ==
140 140  
141 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
116 +=== ===
142 142  
118 +=== **Method 1**: Connect via Ethernet with DHCP IP from the router ===
143 143  
144 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
120 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
145 145  
146 -(% style="background-color:yellow" %)**dragino+dragino**
147 -
148 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 -
150 -[[image:image-20230527084515-1.png]]
151 -
152 -[[image:image-20230527085250-2.png||height="495" width="284"]]
153 -
154 -
155 -
156 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
157 -
158 -
159 -(((
160 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
161 -)))
162 -
163 -(((
164 164  You can also use this IP to connect.
165 -)))
166 166  
167 167  [[image:image-20220622100129-1.png||height="332" width="1263"]]
168 168  
169 169  
127 +=== **Method 2**: Connect via WiFi with DHCP IP from the router ===
170 170  
171 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
172 172  
130 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
173 173  
174 -[[image:image-20230107084650-2.png||height="310" width="839"]]
175 175  
133 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
176 176  
177 -(% style="color:blue" %)**Steps to connect via fallback IP:**
178 178  
179 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
136 +**Steps to connect via fallback IP:**
180 180  
181 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
138 +~1. Connect PC’s Ethernet port to LPS8-V2's WAN port
182 182  
140 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
183 183  
184 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
142 +[[image:image-20220622101433-4.png]]
185 185  
186 186  
187 -As in the below photo:
145 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
188 188  
189 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
190 190  
148 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
191 191  
192 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
193 193  
194 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
151 +Fill in the WiFi information by checking the box and clicking **Save&Apply**
195 195  
196 196  
197 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
198 -
199 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
200 -
201 -
202 -
203 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
204 -
205 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
206 -
207 -
208 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
209 -
210 -
211 211  [[image:image-20220622102702-6.png]]
212 212  
213 213  
214 -
215 215  **Wi-Fi configuration successful**
216 216  
217 217  
218 218  [[image:image-20220622102847-7.png]]
219 219  
162 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
220 220  
221 -[[image:image-20220622102901-8.png||height="476" width="938"]]
222 222  
223 223  
224 -=== 2.1.2 Access Configure Web UI ===
225 225  
167 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
226 226  
227 -**Web Interface**
228 228  
229 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
170 +=== **2.2.1 Select your area frequency** ===
230 230  
231 -
232 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
233 -
234 -You will see the login interface of LPS8-V2 as shown below.
235 -
236 -The account details for Web Login are:
237 -
238 -(% style="color:blue" %)**User Name: root**
239 -
240 -(% style="color:blue" %)**Password:   dragino**
241 -
242 -[[image:image-20230106153501-1.png||height="367" width="894"]]
243 -
244 -
245 -== 2.2  Typical Network Setup ==
246 -
247 -=== 2.2.1  Overview ===
248 -
249 -
250 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
251 -
252 -* **WAN Port Internet Mode**
253 -
254 -* **WiFi Client Mode**
255 -
256 -* **Cellular Mode**
257 -
258 -=== 2.2.2  Use WAN port to access Internet ===
259 -
260 -
261 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
262 -
263 -
264 -[[image:image-20230411100633-2.png||height="501" width="935"]]
265 -
266 -
267 -=== 2.2.3  Access the Internet as a WiFi Client ===
268 -
269 -
270 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
271 -
272 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
273 -
274 -[[image:image-20230411095739-1.png||height="264" width="691"]]
275 -
276 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
277 -
278 -
279 -=== 2.2.4  Use built-in 4G modem for internet access ===
280 -
281 -
282 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
283 -
284 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
285 -
286 -
287 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
288 -
289 -First, install the Micro SIM card as below direction
290 -
291 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
292 -
293 -
294 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
295 -
296 -
297 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
298 -
299 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
300 -
301 -
302 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
303 -
304 -
305 -=== 2.2.5  Check Internet connection ===
306 -
307 -
308 -In the **home** page, we can check the Internet connection.
309 -
310 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
311 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
312 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
313 -
314 -[[image:image-20230411101534-3.png||height="544" width="942"]]
315 -
316 -
317 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
318 -
319 -=== 2.3.1 Select your area frequency ===
320 -
321 -
322 -(((
323 323  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
324 324  
325 -
326 -)))
174 +[[image:image-20220622103332-9.png]]
327 327  
328 -[[image:image-20220622103332-9.png||height="485" width="938"]]
329 329  
177 +=== **2.2.2 Get the only gateway EUI** ===
330 330  
331 -=== 2.3.2 Get the only gateway EUI ===
332 -
333 -
334 334  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
335 335  
181 +[[image:image-20220622103355-10.png]]
336 336  
337 -[[image:image-20220622103355-10.png||height="698" width="949"]]
338 338  
184 +**Note: Choose the cluster that corresponds to a specific Gateway server address**
339 339  
340 -(% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
341 -
342 -
343 343  **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
344 344  
345 345  **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
... ... @@ -352,14 +352,13 @@
352 352  [[image:image-20220622103956-12.png]]
353 353  
354 354  
355 -=== 2.3.3 Register the gateway to The Things Network ===
356 356  
199 +== 2.2.3 Register the gateway to The Things Network ==
357 357  
358 358  **Login to The Things Network**
359 359  
360 360  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
361 361  
362 -
363 363  **Add the gateway**
364 364  
365 365  [[image:image-20220622104252-13.png||height="511" width="953"]]
... ... @@ -368,599 +368,198 @@
368 368  **Get it online**
369 369  
370 370  
371 -= 3. Web Configure Pages =
213 += **3. Web Configure Pages** =
372 372  
373 -== 3.1 Home ==
374 374  
216 +== **3.1 Home** ==
375 375  
376 -Shows the system running status:
218 +//Shows the system running status~://
377 377  
378 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
220 +== **3.2 LoRa Settings** ==
379 379  
380 380  
381 -== 3.2 LoRa Settings ==
223 +=== **3.2.1 LoRa ~-~-> LoRa** ===
382 382  
383 -=== 3.2.1 LoRa ~-~-> LoRa ===
384 384  
226 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
385 385  
386 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
228 +//Different LPS8v2 hardware versions can support different frequency ranges~://
387 387  
388 -Different LPS8v2 hardware versions can support different frequency ranges:
230 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
231 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
389 389  
390 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
391 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
392 -
393 393  (% class="wikigeneratedid" %)
394 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
234 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page **LogRead ~-~-> LoRa Log**//
395 395  
396 -
397 397  (% class="wikigeneratedid" %)
398 398  [[image:image-20220616110739-1.png||height="372" width="682"]]
399 399  
400 400  
401 -(((
402 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
403 -)))
240 +//**Note ***: See this instruction for how to customize the frequency band~://
404 404  
242 +//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
405 405  
406 -== 3.3 LoRaWAN Settings ==
407 407  
408 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
245 +== **3.3 LoRaWAN Settings** ==
409 409  
410 410  
411 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
248 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
412 412  
413 413  
251 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
252 +
414 414  [[image:image-20220616111932-2.png||height="516" width="672"]]
415 415  
416 416  
417 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
256 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
418 418  
419 419  
420 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
259 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
421 421  
422 -
423 423  [[image:image-20220616113246-3.png||height="396" width="672"]]
424 424  
425 425  
426 -(((
427 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
428 -)))
264 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
429 429  
430 430  
431 -== 3.4 Network Settings ==
267 +== **3.4 Network Settings** ==
432 432  
433 -=== 3.4.1 Network ~-~-> WiFi ===
434 434  
435 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
270 +=== **3.4.1 Network ~-~-> WiFi** ===
436 436  
437 -[[image:image-20230619095946-1.png||height="332" width="827"]]
438 438  
273 +[[image:image-20220616114756-4.png||height="251" width="669"]]
439 439  
440 -=== 3.4.2 Network ~-~-> System Status ===
441 441  
276 +=== **3.4.2 Network ~-~-> System Status** ===
442 442  
443 -[[image:image-20220820134112-2.png||height="539" width="668"]]
444 444  
279 +[[image:image-20220616115229-5.png||height="548" width="665"]]
445 445  
446 -=== 3.4.3 Network ~-~-> Network ===
447 447  
282 +=== **3.4.3 Network ~-~-> Firewall** ===
448 448  
449 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
450 450  
451 -[[image:image-20230214093657-2.png||height="333" width="858"]]
285 +[[image:image-20220616115351-6.png||height="244" width="661"]]
452 452  
453 453  
454 -=== 3.4.4 Network ~-~-> Cellular ===
288 +== **3.5 System** ==
455 455  
456 456  
457 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
291 +=== **3.5.1  System ~-~-> System Overview** ===
458 458  
459 -(% style="color:red" %)**Note: APN cannot be empty.**
460 460  
461 -[[image:image-20230228115126-1.png]]
462 -
463 -
464 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
465 -
466 -[[image:image-20230228115535-2.png||height="478" width="888"]]
467 -
468 -
469 -Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
470 -
471 -[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
472 -
473 -
474 -== 3.5 System ==
475 -
476 -=== 3.5.1 System ~-~-> System Overview ===
477 -
478 -
479 479  Shows the system info:
480 480  
481 -[[image:image-20220917144512-5.png||height="618" width="853"]]
482 482  
297 +=== **3.5.2 System ~-~-> Backup/Restore** ===
483 483  
484 -=== 3.5.2 System ~-~-> System General ===
485 485  
300 +[[image:image-20220616115808-7.png||height="194" width="649"]]
486 486  
487 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
488 488  
489 -In addition, Users can customize the FallBack IP address.
490 490  
491 -[[image:image-20230214094058-3.png]]
304 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
492 492  
493 493  
494 -=== 3.5.3 System ~-~-> Backup/Restore ===
307 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: **The Things Network - Stack (Open Source 3.19 Version).**
495 495  
309 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
496 496  
497 -[[image:image-20220917144725-6.png||height="208" width="869"]]
498 498  
312 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
499 499  
500 -=== 3.5.4 System ~-~-> Remoteit ===
501 501  
502 -
503 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
504 -
505 -
506 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
507 -
508 -[[image:image-20221230092303-2.png]]
509 -
510 -
511 -=== 3.5.5 System ~-~-> Package Management ===
512 -
513 -
514 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
515 -
516 -[[image:image-20230214094316-4.png]]
517 -
518 -
519 -= 4. Build-in Server =
520 -
521 -
522 -Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
523 -
524 -[[image:image-20230616175617-8.png||height="390" width="894"]]
525 -
526 -[[image:image-20230616175558-7.png||height="362" width="894"]]
527 -
528 -
529 -
530 -(% style="color:red" %)**Note:**
531 -
532 - **Path**: Server ~-~-> Network Server
533 -
534 - Server ~-~-> Application Server
535 -
536 -
537 -**Troubleshooting:**
538 -
539 -
540 -**~ 1. URL does not jump properly**
541 -
542 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
543 -
544 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
545 -
546 -
547 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
548 -
549 -
550 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
551 -
552 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
553 -
554 -
555 555  Login account:
556 556  
557 -**Username : ** (% style="background-color:yellow" %)**admin**
317 +**User ID: ** (% class="mark" %)admin
558 558  
559 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
319 +**Password: ** (% class="mark" %)dragino
560 560  
561 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
562 562  
322 +[[image:image-20220725171719-1.png||height="570" width="769"]]
563 563  
324 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
325 + You can complete the installation manually with the following command.(%%)**
564 564  
565 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
566 566  
567 -
568 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
569 -
570 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
571 -
572 -[[image:image-20230321092456-1.png]]
573 -
574 -
575 -
576 -== 4.2 Application Server ~-~- Node-Red ==
577 -
578 -
579 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
580 -
581 -
582 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
583 -
584 -
585 -[[image:image-20220725172124-3.png||height="610" width="843"]]
586 -
587 -
588 -
589 -=== **Using Node-Red, InfluxDB and Grafana** ===
590 -
591 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
592 -
593 -
594 -the users can refer to this link to install them.
595 -
596 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
597 -
598 -
599 -=== **Upgrade the node.js** ===
600 -
601 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
602 -
603 -
604 -the users can refer to this link to upgrade them.
605 -
606 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
607 -
608 -
609 -== 4.3 How to disable the built-in server ==
610 -
611 -
612 -Use the following commands to start and stop the TTNv3 service:
613 -
614 614  (% class="box infomessage" %)
615 615  (((
616 -**# start**
617 -systemctl start ttnstack
330 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
618 618  
619 -**# stop**
620 -systemctl stop ttnstack
621 -
622 -**# enable**
623 -systemctl enable ttnstack
624 -
625 -**#disable**
626 -systemctl disable ttnstack
332 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
627 627  )))
628 628  
629 -Use the following commands to start and stop the Node-Red service:
630 630  
631 -(% class="box infomessage" %)
632 -(((
633 -**# start**
634 -systemctl start nodered
336 += **5. Build-in Application Server ~-~- Node-Red** =
635 635  
636 -**# stop**
637 -systemctl stop nodered
638 638  
639 -**# enable**
640 -systemctl enable nodered
339 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: **Node-Red.**
641 641  
642 -**#disable**
643 -systemctl disable nodered
644 -)))
341 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
645 645  
646 646  
647 -== 4.4 How to use ChirpStack on LPS8-V2 ==
344 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
648 648  
346 +[[image:image-20220725172124-3.png||height="610" width="843"]]
649 649  
650 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
651 651  
652 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
653 653  
350 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
351 + You can complete the installation manually with the following command.(%%)**
654 654  
655 -=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
656 656  
657 -
658 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
659 -
660 -If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
661 -
662 -[[image:image-20230602140406-3.png||height="480" width="918"]]
663 -
664 -
665 -When the configuration is complete, click** "Save&Apply"**.
666 -
667 -
668 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
669 -
670 -[[image:image-20230602143122-4.png||height="511" width="983"]]
671 -
672 -
673 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
674 -
675 -
676 -
677 -= 6. How users can access LPS8-V2 using serial USB =
678 -
679 -
680 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
681 -
682 -Port 1 of the UART on the LPS8-V2 is GND
683 -
684 684  (% class="box infomessage" %)
685 685  (((
686 -**TXD  <~-~--> UART RXD (Gray line)**
687 -
688 -**RXD  <~-~--> UART TXD (White line)**
689 -
690 -**GND <~-~--> GND (Black line)**
356 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
357 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
691 691  )))
692 692  
693 -**LPS8v2 UART connection photo**
360 +[[image:image-20220728102000-1.png]]
694 694  
695 -[[image:image-20230421094319-2.png||height="351" width="392"]]
696 696  
697 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
363 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
698 698  
699 -
700 -[[image:image-20220804164928-3.png||height="320" width="332"]]
701 -
702 -
703 -[[image:image-20220804164747-2.png||height="622" width="594"]]
704 -
705 -
706 -= 7. OTA System Update =
707 -
708 -
709 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
710 -
711 -
712 -== 7.1 Auto-update method ==
713 -
714 -
715 -The default, each gateway will enable the auto-update function.
716 -
717 -this function will be triggered every boot and every midnight.
718 -
719 -
720 -Users can enable/disable it via Web Page
721 -
722 -[[image:image-20230607094447-2.png]]
723 -
724 -
725 -== 7.2 Manual upgrade method ==
726 -
727 -
728 -1). Using the Linux command to upgrade the system
729 -
730 -
731 -(% class="box infomessage" %)
732 732  (((
733 -**apt update && apt install *dragino***
366 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
734 734  )))
735 735  
736 -
737 -2). Upgrade the system via the Web page button of "Manual Update"
738 -
739 -
740 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
741 -
742 -[[image:image-20230607093849-1.png]]
743 -
744 -
745 -
746 -= 8. FAQ =
747 -
748 -== 8.1 How to change Hostname ==
749 -
750 -
751 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
752 -
753 -(% class="box infomessage" %)
754 754  (((
755 -hostnamectl set-hostname dragino-123456
756 -)))
370 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
757 757  
758 -[[image:image-20230517102429-1.png]]
759 759  
760 -After the configuration is complete, run "reboot" to restart the gateway.
373 += **11 Reference** =
761 761  
762 -
763 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
764 -
765 -
766 -Migrate guide:
767 -
768 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
769 -
770 -**2. On the Server ~-~-> Network Server interface, click "Management"**
771 -
772 -[[image:image-20230616162454-1.png]]
773 -
774 -
775 -**3. Click "Migrate-Chirpstack"**
776 -
777 -[[image:image-20230616162742-2.png]]
778 -
779 -
780 -**4. Strat Install **
781 -
782 -Click start Install and wait until the migration succeeds
783 -
784 -[[image:image-20230616162934-3.png]]
785 -
786 -
787 -**5.Migration complete check result**
788 -
789 -[[image:image-20230616174526-4.png||height="706" width="983"]]
790 -
791 -
792 -[[image:image-20230616180004-9.png]]
793 -
794 -
795 -== 8.3 How to reduce the 4g data consumed ==
796 -
797 -
798 -1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
799 -
800 -[[image:image-20230719100239-1.png||height="724" width="994"]]
801 -
802 -
803 -2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
804 -
805 -[[image:image-20230719100332-2.png]]
806 -
807 -
808 -3. Disable the auto-update:
809 -
810 -[[image:image-20230719100419-3.png||height="458" width="995"]]
811 -
812 -
813 -== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
814 -
815 -
816 -(% class="box infomessage" %)
817 -(((
818 -apt update && apt install helium-gateway
819 -)))
820 -
821 -
822 -= 9. Trouble Shooting =
823 -
824 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
825 -
826 -
827 -[[image:image-20220920135918-1.png]]
828 -
829 -
830 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
831 -
832 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
833 -
834 -
835 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
836 -
837 -**Click the update URL button to configure the URL with the current eth port address.**
838 -
839 -[[image:image-20220920141936-2.png]]
840 -
841 -
842 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
843 -
844 -
845 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
846 -
847 -[[image:image-20230508171607-1.png]]
848 -
849 -
850 -== 9.3  Fallback IP does not work, how can users check ==
851 -
852 -
853 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
854 -
855 -
856 -**1.Check whether the configuration is correct**
857 -
858 -Run the CMD command to ipconfig and ping 172.31.255.254.
859 -
860 -If this fails, the user needs to reconfigure.
861 -
862 -[[image:image-20230413170224-3.png||height="433" width="707"]]
863 -
864 -[[image:image-20230413170246-4.png]]
865 -
866 -
867 -**2. Check whether the firewall is disabled**
868 -
869 -If the firewall is not down, this will affect access to the gateway.
870 -
871 -
872 -== 9.4  Click "Manual_Update", why there is no response? ==
873 -
874 -
875 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
876 -
877 -
878 -[[image:image-20230527090555-3.png||height="660" width="832"]]
879 -
880 -
881 -== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
882 -
883 -
884 -Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
885 -
886 -
887 -(% class="box infomessage" %)
888 -(((
889 -apt update && apt install dragino-fallback
890 -
891 -wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
892 -)))
893 -
894 -
895 -== 9.6  How to clear data from the built-in server ==
896 -
897 -
898 -**1) Build-in The Things Network**
899 -
900 -Due to the bugs of Build-in The Things Network, when the IP address of LPS8v2 changes, the built-in TTN configuration cannot be deleted
901 -
902 -Users can go back to the IP address configured for the first time or follow the steps below to clear the built-in TTN configuration:
903 -
904 -
905 -
906 -**2) Build-in Chirpstack**
907 -
908 -
909 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
910 -
911 -
912 -(((
913 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
914 -)))
915 -
916 -(((
917 -With your question as detailed as possible. We will reply and help you in the shortest.
918 -
919 -
920 -= 11. Reference =
921 -
922 -
923 923  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
924 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
925 925  
926 926  
927 927  )))
928 928  
929 -= 12. Order Info =
380 += **12. Order Info** =
930 930  
931 -
932 932  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
933 933  
934 934  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
935 935  
936 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
386 +* **AS923**: LoRaWAN AS923 band
387 +* **AU915**: LoRaWAN AU915 band
388 +* **EU868**: LoRaWAN EU868 band
389 +* **KR920**: LoRaWAN KR920 band
390 +* **US915**: LoRaWAN US915 band
391 +* **IN865**: LoRaWAN IN865 band
937 937  
938 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
939 -
940 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
941 -
942 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
943 -
944 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
945 -
946 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
947 -
948 948  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
949 949  
950 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
395 +* ** E**: EMEA, Korea, Thailand, India.
396 +* ** A**: North America/ Rogers/AT&T/T-Mobile.
397 +* ** AU**: Latin America, New Zeland, Taiwan
398 +* ** J**: Japan, DOCOMO/SoftBank/ KDDI
951 951  
952 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
953 -
954 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
955 -
956 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
957 -
958 958  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
959 959  
960 960  
961 -= 13. Manufacturer Info =
403 += **13. Manufacturer Info** =
962 962  
963 -
964 964  **Shenzhen Dragino Technology Development co. LTD**
965 965  
966 966  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -968,38 +968,21 @@
968 968  LongCheng Street, LongGang District ; Shenzhen 518116,China
969 969  
970 970  
971 -= 14. FCC Warning =
412 += **14. FCC Warning** =
972 972  
973 -
974 -(((
975 975  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
976 -)))
977 977  
978 -(((
979 979  ~-~- Reorient or relocate the receiving antenna.
980 -)))
981 981  
982 -(((
983 983  ~-~- Increase the separation between the equipment and receiver.
984 -)))
985 985  
986 -(((
987 987  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
988 -)))
989 989  
990 -(((
991 991  ~-~- Consult the dealer or an experienced radio/TV technician for help.
992 -)))
993 993  
994 994  
995 -(((
996 996  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
997 -)))
998 998  
999 999  
1000 -(((
1001 1001  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
1002 -
1003 -
1004 1004  )))
1005 -)))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0