Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 231.1 >
edited by Xiaoye
on 2023/07/19 10:02
To version < 325.1 >
edited by Kilight Cao
on 2024/09/02 08:53
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 -- LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents：**
11 +**Table of Contents:**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== 1.1 What is LPS8v2 ==
21 +== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
22 22  
23 23  
24 24  (((
... ... @@ -81,7 +81,7 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
84 +* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 87  == 1.4 LED Indicators ==
... ... @@ -96,11 +96,11 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
103 + ✓**  SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
... ... @@ -121,6 +121,18 @@
121 121   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
123 123  
124 +(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 +
126 +See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 +
128 +
129 +When the gateway restores the factory settings is complete,
130 +
131 +The WiFi configuration will enable WiFi Access Point by default.
132 +
133 +The other configuration will be restored to the default configuration.
134 +
135 +
124 124  = 2. Quick Start =
125 125  
126 126  
... ... @@ -148,7 +148,6 @@
148 148  [[image:image-20230527085250-2.png||height="495" width="284"]]
149 149  
150 150  
151 -
152 152  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
153 153  
154 154  
... ... @@ -163,7 +163,6 @@
163 163  [[image:image-20220622100129-1.png||height="332" width="1263"]]
164 164  
165 165  
166 -
167 167  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
168 168  
169 169  
... ... @@ -187,7 +187,7 @@
187 187  
188 188  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
189 189  
190 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
200 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
191 191  
192 192  
193 193  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -195,7 +195,6 @@
195 195  [[image:image-20230111094247-2.png||height="619" width="1250"]]
196 196  
197 197  
198 -
199 199  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
200 200  
201 201  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -235,7 +235,7 @@
235 235  
236 236  (% style="color:blue" %)**Password:   dragino**
237 237  
238 -[[image:image-20230106153501-1.png||height="367" width="894"]]
247 +[[image:image-20240318160845-1.png]]
239 239  
240 240  
241 241  == 2.2  Typical Network Setup ==
... ... @@ -298,6 +298,9 @@
298 298  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 299  
300 300  
310 +**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 +
312 +
301 301  === 2.2.5  Check Internet connection ===
302 302  
303 303  
... ... @@ -457,22 +457,46 @@
457 457  [[image:image-20230228115126-1.png]]
458 458  
459 459  
460 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
472 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
461 461  
462 462  [[image:image-20230228115535-2.png||height="478" width="888"]]
463 463  
464 464  
465 -== 3.5 System ==
477 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
466 466  
467 -=== 3.5.1 System ~-~-> System Overview ===
479 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
468 468  
481 +(% class="wikigeneratedid" id="H5.MQTTForwarder" %)
482 +(% id="cke_bm_4823S" style="display:none" %)
469 469  
484 +(% class="wikigeneratedid" %)
485 +== 3.5 Forwarder ==
486 +
487 +(% class="wikigeneratedid" %)
488 +=== 3.5.1 Forwarder~-~->MQTT Forwarder ===
489 +
490 +
491 +In the latest version, MQTT Forwarder functionality has been added to the LPS8V2 gateway by default
492 +
493 +Users can configure the MQTT Forwarder on the **Forwarder~-~->MQTT** interface, and when the configuration is successful, it will forward the sensor data of the lorawan server chirpstack built in LPS8v2
494 +
495 +For a detailed example of this feature, see this link:**[[MQTT Forward Instruction - DRAGINO>>http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/#H3.3A0UseLoRaWANProtocolforcommunication--ForLPS8V2]]**
496 +
497 +(% class="wikigeneratedid" %)
498 +[[image:image-20240831152113-2.png]]
499 +
500 +
501 +== 3.6 System ==
502 +
503 +=== 3.6.1 System ~-~-> System Overview ===
504 +
505 +
470 470  Shows the system info:
471 471  
472 -[[image:image-20220917144512-5.png||height="618" width="853"]]
508 +[[image:image-20231031162854-1.png]]
473 473  
474 474  
475 -=== 3.5.2 System ~-~-> System General ===
511 +=== 3.6.2 System ~-~-> System General ===
476 476  
477 477  
478 478  In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
... ... @@ -482,15 +482,29 @@
482 482  [[image:image-20230214094058-3.png]]
483 483  
484 484  
485 -=== 3.5.3 System ~-~-> Backup/Restore ===
521 +=== 3.6.3 System ~-~-> Backup/Restore ===
486 486  
487 487  
488 -[[image:image-20220917144725-6.png||height="208" width="869"]]
524 +[[image:image-20231031162927-2.png]]
489 489  
526 +=== 3.6.4 System ~-~-> Reboot / Reset ===
490 490  
491 -=== 3.5.4 System ~-~-> Remoteit ===
528 +In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
492 492  
530 +ETH LED will SOLID BULE Until the restore is finished.
493 493  
532 +When the gateway restores the factory settings is complete,
533 +
534 +The WiFi configuration will enable WiFi Access Point by default.
535 +
536 +The other configuration will be restored to the default configuration.
537 +
538 +[[image:image-20240203172853-1.png||height="365" width="901"]]
539 +
540 +
541 +=== 3.6.5 System ~-~-> Remoteit ===
542 +
543 +
494 494  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
495 495  
496 496  
... ... @@ -499,7 +499,7 @@
499 499  [[image:image-20221230092303-2.png]]
500 500  
501 501  
502 -=== 3.5.5 System ~-~-> Package Management ===
552 +=== 3.6.6 System ~-~-> Package Management ===
503 503  
504 504  
505 505  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -507,103 +507,114 @@
507 507  [[image:image-20230214094316-4.png]]
508 508  
509 509  
510 -= 4. Build-in Server =
560 +== 3.7 Logread ==
511 511  
562 +=== 3.7.1 LoRa Log ===
512 512  
513 -Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
514 514  
515 -[[image:image-20230616175617-8.png||height="390" width="894"]]
565 +In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
516 516  
517 -[[image:image-20230616175558-7.png||height="362" width="894"]]
567 +[[image:image-20240416112509-1.png]]
518 518  
519 519  
570 +=== 3.7.2 Gateway Traffic ===
520 520  
521 -(% style="color:red" %)**Note:**
572 +In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
522 522  
523 - **Path**: Server ~-~-> Network Server
574 +[[image:image-20240416112618-2.png||height="705" width="1122"]]
524 524  
525 - Server ~-~-> Application Server
526 526  
577 +=== 3.7.3 System Log ===
527 527  
528 -**Troubleshooting:**
579 +In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
529 529  
581 +[[image:image-20240416112649-3.png||height="820" width="1122"]]
530 530  
531 -**~ 1. URL does not jump properly**
532 532  
533 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
584 +=== 3.7.4 Record Log ===
534 534  
535 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
586 +In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
536 536  
588 +[[image:image-20240416112712-4.png||height="319" width="1128"]]
537 537  
538 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
539 539  
540 540  
541 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
592 += 4. Build-in Server =
542 542  
543 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
594 +After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
544 544  
545 545  
546 -Login account:
597 +== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
547 547  
548 -**Username : ** (% style="background-color:yellow" %)**admin**
599 +[[image:image-20231106180816-4.png||height="416" width="896"]]
549 549  
550 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
601 +[[image:image-20231201165904-1.png||height="466" width="899"]]
551 551  
552 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
603 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
553 553  
605 +For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
554 554  
555 555  
556 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
557 557  
609 +== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
558 558  
559 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
560 560  
561 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
612 +[[image:image-20230616175558-7.png||height="362" width="894"]]
562 562  
563 -[[image:image-20230321092456-1.png]]
614 +[[image:image-20231201170355-2.png||height="536" width="899"]]
564 564  
616 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
565 565  
566 566  
567 -== 4.2 Application Server ~-~- Node-Red ==
568 568  
620 +== **3). Troubleshooting:** ==
569 569  
570 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
571 571  
623 +* (((
624 +=== ** If the URL does not jump properly.** ===
625 +)))
572 572  
573 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
627 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
574 574  
629 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
575 575  
576 -[[image:image-20220725172124-3.png||height="610" width="843"]]
577 577  
632 +* (((
633 +=== ** How to install InfluxDB, Garfana.** ===
634 +)))
578 578  
636 + The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
579 579  
580 -=== **Using Node-Red, InfluxDB and Grafana** ===
581 581  
582 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
639 +* (((
640 +=== ** How to upgrade the gateway node.js to the latest version.** ===
641 +)))
583 583  
643 + The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
584 584  
585 -the users can refer to this link to install them.
586 586  
587 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
646 +* (((
647 +=== ** How to batch register device on the built-in Chirpstack network server** ===
648 +)))
588 588  
650 + The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
589 589  
590 -=== **Upgrade the node.js** ===
591 591  
592 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
653 +* (((
654 +=== ** Why my gateway is not Chirpstack?** ===
655 +)))
593 593  
657 + After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
594 594  
595 -the users can refer to this link to upgrade them.
596 596  
597 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
660 +* (((
661 +=== ** How to disable the built-in server** ===
662 +)))
598 598  
599 -
600 -== 4.3 How to disable the built-in server ==
601 -
602 -
603 -Use the following commands to start and stop the TTNv3 service:
604 -
605 605  (% class="box infomessage" %)
606 606  (((
666 +Use the following commands to start and stop the TTNv3 service:**     **
667 +
607 607  **# start**
608 608  systemctl start ttnstack
609 609  
... ... @@ -617,10 +617,10 @@
617 617  systemctl disable ttnstack
618 618  )))
619 619  
620 -Use the following commands to start and stop the Node-Red service:
621 -
622 622  (% class="box infomessage" %)
623 623  (((
683 +Use the following commands to start and stop the Node-Red service:
684 +
624 624  **# start**
625 625  systemctl start nodered
626 626  
... ... @@ -635,42 +635,49 @@
635 635  )))
636 636  
637 637  
638 -== 4.4 How to use ChirpStack on LPS8-V2 ==
699 +* (((
700 +=== ** How to choose the Chirpstack server frequency SubBand** ===
701 +)))
639 639  
703 +**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
640 640  
641 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
705 + Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
642 642  
643 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
707 +[[image:image-20230602140406-3.png||height="480" width="918"]]
644 644  
645 645  
646 -=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
710 +When the configuration is complete, click** "Save&Apply"**.
647 647  
648 648  
649 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
713 +(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
650 650  
651 -If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
715 +[[image:image-20230602143122-4.png||height="511" width="983"]]
652 652  
653 -[[image:image-20230602140406-3.png||height="480" width="918"]]
654 654  
655 655  
656 -When the configuration is complete, click** "Save&Apply"**.
719 += 5. Watch Dog =
657 657  
658 658  
659 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
722 +The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
660 660  
661 -[[image:image-20230602143122-4.png||height="511" width="983"]]
662 662  
725 +LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
663 663  
664 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
727 +The uses can be via the below method to enable Watch Dog:
665 665  
729 +(% class="box infomessage" %)
730 +(((
731 +wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
732 +)))
666 666  
734 +[[image:image-20231124113209-1.png||height="470" width="1157"]]
667 667  
736 +
668 668  = 6. How users can access LPS8-V2 using serial USB =
669 669  
670 670  
671 671  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
672 672  
673 -
674 674  Port 1 of the UART on the LPS8-V2 is GND
675 675  
676 676  (% class="box infomessage" %)
... ... @@ -682,10 +682,8 @@
682 682  **GND <~-~--> GND (Black line)**
683 683  )))
684 684  
685 -
686 686  **LPS8v2 UART connection photo**
687 687  
688 -
689 689  [[image:image-20230421094319-2.png||height="351" width="392"]]
690 690  
691 691  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -721,7 +721,6 @@
721 721  
722 722  1). Using the Linux command to upgrade the system
723 723  
724 -
725 725  (% class="box infomessage" %)
726 726  (((
727 727  **apt update && apt install *dragino***
... ... @@ -730,17 +730,297 @@
730 730  
731 731  2). Upgrade the system via the Web page button of "Manual Update"
732 732  
798 +(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
733 733  
734 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
735 -
736 736  [[image:image-20230607093849-1.png]]
737 737  
738 738  
739 -= 8. FAQ =
803 += (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)8 How do I view gateway logs(%%) =
740 740  
741 -== 8.1 How to change Hostname ==
805 +=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)8.1 LoRaWAN Log:(%%) ===
742 742  
743 743  
808 +==== Semtech UDP Log : ====
809 +
810 +When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
811 +
812 +[[image:image-20231017112115-2.png||height="611" width="821"]]
813 +
814 +
815 +==== Station Log: ====
816 +
817 +When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
818 +
819 +[[image:image-20231017111606-1.png||height="622" width="821"]]
820 +
821 +
822 +=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)8.2  4G Log(%%) ===
823 +
824 +
825 +User needs to access the Linux console of the gateway and enter the following command:
826 +
827 +(% class="box infomessage" %)
828 +(((
829 +cat /var/log/qmilog.txt
830 +)))
831 +
832 +[[image:image-20231017114417-3.png||height="543" width="679"]]
833 +
834 +
835 +LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
836 +
837 +Below are some commands as reference:
838 +
839 +>Usage:  /usr/bin/quectel-CM [options]
840 +> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
841 +> -p pincode Verify sim card pin if sim card is locked
842 +> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
843 +> -f logfilename Save log message of this program to file
844 +> -u usbmonlog filename  Save usbmon log to file
845 +> -i interface Specify which network interface to setup data call when multi-modems exits
846 +> -4 Setup IPv4 data call (default)
847 +> -6 Setup IPv6 data call
848 +> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
849 +> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
850 +> -b Enable network interface bridge function (default 0)
851 +> -v Verbose log mode, for debug purpose.[Examples]
852 +>Example 1: /usr/bin/quectel-CM
853 +>Example 2: /usr/bin/quectel-CM -s 3gnet
854 +>Example 3: /usr/bin/quectel-CM -s 3gnet -v
855 +
856 +
857 +
858 +=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)8.3 Dmesg Log(%%) ===
859 +
860 +
861 +Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
862 +
863 +[[image:image-20231017115330-5.png||height="565" width="740"]]
864 +
865 +
866 +=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)8.4 Record Log(%%) ===
867 +
868 +
869 +Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
870 +
871 +[[image:image-20231017115124-4.png||height="215" width="880"]]
872 +
873 +
874 +=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)8.5 View gateway logs via Linux Command(%%) ===
875 +
876 +
877 +**Semtech UDP Log :**
878 +
879 +(% class="box infomessage" %)
880 +(((
881 +**journalctl -u draginofwd -f**
882 +)))
883 +
884 +[[image:image-20231207144627-1.png||height="371" width="1017"]]
885 +
886 +
887 +**Station Log:**
888 +
889 +(% class="box infomessage" %)
890 +(((
891 +**tail -f /var/log/station.log **
892 +)))
893 +
894 +[[image:image-20231207144758-2.png||height="132" width="1022"]]
895 +
896 +
897 +**Dmesg Log:**
898 +
899 +(% class="box infomessage" %)
900 +(((
901 +**dmesg**
902 +)))
903 +
904 +[[image:image-20231207145210-3.png||height="310" width="1021"]]
905 +
906 +
907 +
908 +(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
909 += (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)9. More Services(%%) =
910 +
911 +== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)9.1 NTP Service/Time Synchronization(%%) ==
912 +
913 +The gateway time sync service is provided by chrony service
914 +
915 +
916 +=== 1). Modify the NTP server address: ===
917 +
918 +(% class="box infomessage" %)
919 +(((
920 +Configuration file path:  /etc/chrony/chrony.conf
921 +)))
922 +
923 +
924 +=== 2). Start/Stop/Enable/Disable NTP service: ===
925 +
926 +(% class="box infomessage" %)
927 +(((
928 +systemctl start chrony
929 +\\systemctl stop chrony
930 +\\systemctl disable chrony
931 +\\systemctl enable chrony
932 +)))
933 +
934 +
935 +(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
936 += (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10. More features(%%) =
937 +
938 +(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
939 +== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)10.1 Chirpstack MQTT Forwarder(%%) ==
940 +
941 +
942 +ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
943 +
944 +
945 +(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
946 +=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
947 +
948 +In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
949 +
950 +(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
951 +By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
952 +
953 +* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
954 +* Configure the following settings:
955 +** **Service Provider:** //Custom / Private LoRaWAN//
956 +** **Server Address:** localhost
957 +** **Uplink Port:** 1700
958 +** **Downlink Port:** 1700
959 +* Click **Save & Apply**
960 +
961 +[[image:image-20240518145929-2.png||height="652" width="727"]]
962 +
963 +
964 +(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
965 +=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
966 +
967 +
968 +(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
969 +(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
970 +
971 +First you must login into the gateway using SSH:
972 +
973 +(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
974 +(((
975 +ssh root@GATEWAY-IP-ADDRESS
976 +)))
977 +
978 +(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
979 +The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
980 +
981 +
982 +(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
983 +(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
984 +
985 +(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
986 +Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
987 +
988 +(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
989 +(((
990 +cd /tmp
991 +wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
992 +)))
993 +
994 +
995 +(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
996 +(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
997 +
998 +Use the dpkg package-manager to install the downloaded package. Example:
999 +
1000 +(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
1001 +(((
1002 +dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
1003 +)))
1004 +
1005 +[[image:image-20240518152148-4.png]]
1006 +
1007 +
1008 +(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
1009 +**Configuration**
1010 +
1011 +To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
1012 +
1013 +(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
1014 +This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1015 +
1016 +
1017 +**ChirpStack MQTT Forwarder Setting:**
1018 +
1019 +(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1020 +(((
1021 +topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
1022 +
1023 +server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1024 +)))
1025 +
1026 +username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1027 +
1028 +
1029 +Use commands to modify configuration files:
1030 +
1031 +(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1032 +(((
1033 +vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1034 +)))
1035 +
1036 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1037 +
1038 +
1039 +**(Re)start and stop commands**
1040 +
1041 +Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1042 +
1043 +(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1044 +(((
1045 +# start
1046 +
1047 +(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1048 +systemctl start chirpstack-mqtt-forwarder
1049 +
1050 +# stop
1051 +
1052 +systemctl stop chirpstack-mqtt-forwarder
1053 +
1054 +# restart
1055 +
1056 +systemctl restart chirpstack-mqtt-forwarder
1057 +)))
1058 +
1059 +(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1060 +(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1061 +
1062 +
1063 +**Check result**
1064 +
1065 +(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1066 +Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
1067 +
1068 +[[image:image-20240518154223-5.png]]
1069 +
1070 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1071 +
1072 +
1073 +== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.2 As a Data-only hotspot connect the helium blockchain(%%) ==
1074 +
1075 +
1076 +(% class="box infomessage" %)
1077 +(((
1078 +(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1079 +apt update && apt install helium-gateway
1080 +)))
1081 +
1082 +
1083 +
1084 += (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11. FAQ(%%) =
1085 +
1086 +== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)11.1 How to change Hostname(%%) ==
1087 +
1088 +
744 744  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
745 745  
746 746  (% class="box infomessage" %)
... ... @@ -753,45 +753,90 @@
753 753  After the configuration is complete, run "reboot" to restart the gateway.
754 754  
755 755  
756 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
1101 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
757 757  
758 758  
759 759  Migrate guide:
760 760  
761 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
1106 +To stabilize the completion of the migration, The users can migrate in one of the following ways
762 762  
763 -**2. On the Server ~-~-> Network Server interface, click "Management"**
1108 +**Method 1. Using the Linux shell, **
764 764  
765 -[[image:image-20230616162454-1.png]]
1110 +**Method 2. Flash a new image with the Chirpstack**
766 766  
767 767  
768 -**3. Click "Migrate-Chirpstack"**
1113 +=== Method 1: Using the Linux shell ===
769 769  
770 -[[image:image-20230616162742-2.png]]
1115 +(% class="box infomessage" %)
1116 +(((
1117 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1118 +)))
771 771  
772 772  
773 -**4. Strat Install **
1121 +=== Method 2: Flash a new image ===
774 774  
1123 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
775 775  
776 -Click start Install and wait until the migration succeeds
777 777  
778 -[[image:image-20230616162934-3.png]]
1126 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
779 779  
780 780  
781 -**5.Migration complete check result**
1129 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
782 782  
783 -[[image:image-20230616174526-4.png||height="706" width="983"]]
1131 +[[image:image-20230719100239-1.png||height="724" width="994"]]
784 784  
785 785  
786 -[[image:image-20230616180004-9.png]]
1134 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
787 787  
1136 +[[image:image-20230719100332-2.png]]
788 788  
789 789  
790 -= 9. Trouble Shooting =
1139 +3. Disable the auto-update:
791 791  
792 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1141 +[[image:image-20230719100419-3.png||height="458" width="995"]]
793 793  
794 794  
1144 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
1145 +
1146 +
1147 +By default, the LPS8v2's built-in server is ChirpStack v4,
1148 +
1149 +If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1150 +
1151 +[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
1152 +
1153 +
1154 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1155 +
1156 +
1157 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).5 (%%)How to check my USB port dev/tty after i plug in USB device. ==
1158 +
1159 +
1160 +When an external USB device is connected to LPS8v2, the user can access the Linux console of the LPS8v2 gateway and run the following command to check the USB port dev/tty:
1161 +
1162 +(% class="box infomessage" %)
1163 +(((
1164 +dmesg
1165 +)))
1166 +
1167 +[[image:image-20240803095144-1.png]]
1168 +
1169 +
1170 +
1171 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).6 DIN Mount Reference:(%%) ==
1172 +
1173 +
1174 +[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1175 +
1176 +[[image:image-20240318095617-2.png]]
1177 +
1178 +
1179 +
1180 +
1181 += (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12. Trouble Shooting(%%) =
1182 +
1183 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)12.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1184 +
795 795  [[image:image-20220920135918-1.png]]
796 796  
797 797  
... ... @@ -807,7 +807,7 @@
807 807  [[image:image-20220920141936-2.png]]
808 808  
809 809  
810 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1200 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
811 811  
812 812  
813 813  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -815,13 +815,13 @@
815 815  [[image:image-20230508171607-1.png]]
816 816  
817 817  
818 -== 9.3  Fallback IP does not work, how can users check ==
1208 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
819 819  
820 820  
821 821  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
822 822  
823 823  
824 -**1.Check whether the configuration is correct**
1214 +**~1. Check whether the configuration is correct**
825 825  
826 826  Run the CMD command to ipconfig and ping 172.31.255.254.
827 827  
... ... @@ -837,7 +837,7 @@
837 837  If the firewall is not down, this will affect access to the gateway.
838 838  
839 839  
840 -== 9.4  Click "Manual_Update", why there is no response? ==
1230 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
841 841  
842 842  
843 843  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -846,10 +846,40 @@
846 846  [[image:image-20230527090555-3.png||height="660" width="832"]]
847 847  
848 848  
849 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1239 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
850 850  
851 851  
1242 +Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1243 +
1244 +(% class="box infomessage" %)
852 852  (((
1246 +apt update && apt install *dragino*
1247 +
1248 +wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1249 +)))
1250 +
1251 +
1252 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1253 +
1254 +
1255 +**1) Build-in The Things Network**
1256 +
1257 +Refer to this link to delete the Built-in server's device.
1258 +
1259 +[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1260 +
1261 +
1262 +**2) Build-in Chirpstack**
1263 +
1264 +Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1265 +
1266 +[[image:image-20231106180846-5.png||height="310" width="668"]]
1267 +
1268 +
1269 += (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)13. Supports(%%) =
1270 +
1271 +
1272 +(((
853 853  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
854 854  )))
855 855  
... ... @@ -857,7 +857,7 @@
857 857  With your question as detailed as possible. We will reply and help you in the shortest.
858 858  
859 859  
860 -= 11. Reference =
1280 += (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)14. Reference(%%) =
861 861  
862 862  
863 863  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -866,7 +866,7 @@
866 866  
867 867  )))
868 868  
869 -= 12. Order Info =
1289 += (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)15. Order Info(%%) =
870 870  
871 871  
872 872  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -898,7 +898,7 @@
898 898  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
899 899  
900 900  
901 -= 13. Manufacturer Info =
1321 += (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)16. Manufacturer Info(%%) =
902 902  
903 903  
904 904  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -908,7 +908,7 @@
908 908  LongCheng Street, LongGang District ; Shenzhen 518116,China
909 909  
910 910  
911 -= 14. FCC Warning =
1331 += (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)17. FCC Warning(%%) =
912 912  
913 913  
914 914  (((
Delete Device.docx
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +336.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +71.7 KB
Content
image-20240803095144-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.0 KB
Content
image-20240831151427-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.2 KB
Content
image-20240831152113-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +62.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0