Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 229.1 >
edited by Kilight Cao
on 2023/06/19 10:20
To version < 109.3 >
edited by Xiaoling
on 2022/09/17 15:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,18 +57,18 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
70 70  
71 71  
71 +== **1.3 Features** ==
72 +
73 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -81,79 +81,74 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
88 88  
89 89  
90 -LPS8-V2 has totally four LEDs, They are:
91 +== **1.4 Block Diagram** ==
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
95 +== **1.5 LED Indicators** ==
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
98 +LPS8-V2 has totally four LEDs, They are:
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
101 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
103 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
106 106  
105 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
107 107  
108 -== 1.5 Button Intruction ==
107 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
109 109  
109 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
110 110  
111 -LPS8-V2 has a black toggle button, which is:
111 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
113 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
113 113  
114 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
117 117  
117 +== **1.6 Button Intruction** ==
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
120 +LPS8-V2 has a black toggle button, which is:
122 122  
123 123  
124 -= 2. Quick Start =
123 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
125 125  
125 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
126 126  
127 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
128 128  
129 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
128 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
130 130  
130 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
131 131  
132 -== 2.1 Connects to the network and accesses the gateway Web UI ==
133 133  
134 -=== 2.1.1 connect the network ===
135 135  
134 += **2. Quick Start** =
136 136  
137 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
138 138  
137 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
139 139  
140 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
139 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
141 141  
142 -(% style="background-color:yellow" %)**dragino+dragino**
143 143  
144 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
145 145  
146 -[[image:image-20230527084515-1.png]]
143 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
147 147  
148 -[[image:image-20230527085250-2.png||height="495" width="284"]]
149 149  
146 +== **2.1.1 connect the network.** ==
150 150  
151 151  
152 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
149 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
153 153  
154 154  
155 155  (((
156 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
153 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
157 157  )))
158 158  
159 159  (((
... ... @@ -164,43 +164,34 @@
164 164  
165 165  
166 166  
167 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
164 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
168 168  
169 169  
170 -[[image:image-20230107084650-2.png||height="310" width="839"]]
167 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
171 171  
172 172  
173 -(% style="color:blue" %)**Steps to connect via fallback IP:**
170 +(((
171 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
172 +)))
174 174  
175 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
176 176  
177 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
178 178  
176 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
179 179  
180 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
178 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
181 181  
180 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
182 182  
183 -As in the below photo:
184 184  
185 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
183 +[[image:image-20220622101433-4.png]]
186 186  
187 187  
188 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
186 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
189 189  
190 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
191 191  
189 +[[image:image-20220622102210-5.png||height="504" width="919"]]
192 192  
193 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
194 194  
195 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
196 -
197 -
198 -
199 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
200 -
201 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
202 -
203 -
204 204  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
205 205  
206 206  
... ... @@ -217,104 +217,13 @@
217 217  [[image:image-20220622102901-8.png||height="476" width="938"]]
218 218  
219 219  
220 -=== 2.1.2 Access Configure Web UI ===
221 221  
209 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
222 222  
223 -**Web Interface**
224 224  
225 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
212 +=== **2.2.1 Select your area frequency** ===
226 226  
227 227  
228 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
229 -
230 -You will see the login interface of LPS8-V2 as shown below.
231 -
232 -The account details for Web Login are:
233 -
234 -(% style="color:blue" %)**User Name: root**
235 -
236 -(% style="color:blue" %)**Password:   dragino**
237 -
238 -[[image:image-20230106153501-1.png||height="367" width="894"]]
239 -
240 -
241 -== 2.2  Typical Network Setup ==
242 -
243 -=== 2.2.1  Overview ===
244 -
245 -
246 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
247 -
248 -* **WAN Port Internet Mode**
249 -
250 -* **WiFi Client Mode**
251 -
252 -* **Cellular Mode**
253 -
254 -=== 2.2.2  Use WAN port to access Internet ===
255 -
256 -
257 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 -
259 -
260 -[[image:image-20230411100633-2.png||height="501" width="935"]]
261 -
262 -
263 -=== 2.2.3  Access the Internet as a WiFi Client ===
264 -
265 -
266 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 -
268 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 -
270 -[[image:image-20230411095739-1.png||height="264" width="691"]]
271 -
272 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 -
274 -
275 -=== 2.2.4  Use built-in 4G modem for internet access ===
276 -
277 -
278 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 -
280 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 -
282 -
283 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 -
285 -First, install the Micro SIM card as below direction
286 -
287 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 -
289 -
290 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 -
292 -
293 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 -
295 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 -
297 -
298 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 -
300 -
301 -=== 2.2.5  Check Internet connection ===
302 -
303 -
304 -In the **home** page, we can check the Internet connection.
305 -
306 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
307 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
308 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
309 -
310 -[[image:image-20230411101534-3.png||height="544" width="942"]]
311 -
312 -
313 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
314 -
315 -=== 2.3.1 Select your area frequency ===
316 -
317 -
318 318  (((
319 319  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
320 320  
... ... @@ -324,9 +324,10 @@
324 324  [[image:image-20220622103332-9.png||height="485" width="938"]]
325 325  
326 326  
327 -=== 2.3.2 Get the only gateway EUI ===
328 328  
225 +=== **2.2.2 Get the only gateway EUI** ===
329 329  
227 +
330 330  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
331 331  
332 332  
... ... @@ -348,9 +348,10 @@
348 348  [[image:image-20220622103956-12.png]]
349 349  
350 350  
351 -=== 2.3.3 Register the gateway to The Things Network ===
352 352  
250 +== **2.2.3 Register the gateway to The Things Network** ==
353 353  
252 +
354 354  **Login to The Things Network**
355 355  
356 356  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -364,30 +364,34 @@
364 364  **Get it online**
365 365  
366 366  
367 -= 3. Web Configure Pages =
368 368  
369 -== 3.1 Home ==
267 += **3. Web Configure Pages** =
370 370  
371 371  
372 -Shows the system running status:
270 +== **3.1 Home** ==
373 373  
272 +
273 +//Shows the system running status~://
274 +
374 374  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
375 375  
376 376  
377 -== 3.2 LoRa Settings ==
378 378  
379 -=== 3.2.1 LoRa ~-~-> LoRa ===
279 +== **3.2 LoRa Settings** ==
380 380  
381 381  
382 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
282 +=== **3.2.1 LoRa ~-~-> LoRa** ===
383 383  
384 -Different LPS8v2 hardware versions can support different frequency ranges:
385 385  
386 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
387 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
285 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
388 388  
287 +//Different LPS8v2 hardware versions can support different frequency ranges~://
288 +
289 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
290 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
291 +
389 389  (% class="wikigeneratedid" %)
390 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
293 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
391 391  
392 392  
393 393  (% class="wikigeneratedid" %)
... ... @@ -399,23 +399,26 @@
399 399  )))
400 400  
401 401  
402 -== 3.3 LoRaWAN Settings ==
403 403  
404 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
306 +== **3.3 LoRaWAN Settings** ==
405 405  
406 406  
407 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
309 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
408 408  
409 409  
312 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
313 +
314 +
410 410  [[image:image-20220616111932-2.png||height="516" width="672"]]
411 411  
412 412  
413 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
414 414  
319 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
415 415  
416 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
417 417  
322 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
418 418  
324 +
419 419  [[image:image-20220616113246-3.png||height="396" width="672"]]
420 420  
421 421  
... ... @@ -424,149 +424,97 @@
424 424  )))
425 425  
426 426  
427 -== 3.4 Network Settings ==
428 428  
429 -=== 3.4.1 Network ~-~-> WiFi ===
334 +== **3.4 Network Settings** ==
430 430  
431 -Users can configure the wifi WAN and enable Wifi Access Point on this interface
432 432  
433 -[[image:image-20230619095946-1.png||height="332" width="827"]]
337 +=== **3.4.1 Network ~-~-> WiFi** ===
434 434  
435 435  
436 -=== 3.4.2 Network ~-~-> System Status ===
340 +[[image:image-20220616114756-4.png||height="251" width="669"]]
437 437  
438 438  
439 -[[image:image-20220820134112-2.png||height="539" width="668"]]
440 440  
344 +=== **3.4.2 Network ~-~-> System Status** ===
441 441  
442 -=== 3.4.3 Network ~-~-> Network ===
443 443  
347 +[[image:image-20220820134112-2.png||height="539" width="668"]]
444 444  
445 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
446 446  
447 -[[image:image-20230214093657-2.png||height="333" width="858"]]
448 448  
351 +=== **3.4.3 Network ~-~-> Firewall** ===
449 449  
450 -=== 3.4.4 Network ~-~-> Cellular ===
451 451  
354 +[[image:image-20220616115351-6.png||height="244" width="661"]]
452 452  
453 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
454 454  
455 -(% style="color:red" %)**Note: APN cannot be empty.**
456 456  
457 -[[image:image-20230228115126-1.png]]
358 +== **3.5 System** ==
458 458  
459 459  
460 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
361 +=== **3.5.1  System ~-~-> System Overview** ===
461 461  
462 -[[image:image-20230228115535-2.png||height="478" width="888"]]
463 463  
464 -
465 -== 3.5 System ==
466 -
467 -=== 3.5.1 System ~-~-> System Overview ===
468 -
469 -
470 470  Shows the system info:
471 471  
472 472  [[image:image-20220917144512-5.png||height="618" width="853"]]
473 473  
474 474  
475 -=== 3.5.2 System ~-~-> System General ===
476 476  
370 +=== **3.5.2 System ~-~-> Backup/Restore** ===
477 477  
478 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
479 479  
480 -In addition, Users can customize the FallBack IP address.
481 -
482 -[[image:image-20230214094058-3.png]]
483 -
484 -
485 -=== 3.5.3 System ~-~-> Backup/Restore ===
486 -
487 -
488 488  [[image:image-20220917144725-6.png||height="208" width="869"]]
489 489  
490 490  
491 -=== 3.5.4 System ~-~-> Remoteit ===
492 492  
377 += **4. Build-in Server** =
493 493  
494 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
495 495  
380 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
496 496  
497 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
498 498  
499 -[[image:image-20221230092303-2.png]]
383 +[[image:image-20220820115644-1.png||height="217" width="778"]]
500 500  
501 501  
502 -=== 3.5.5 System ~-~-> Package Management ===
503 -
504 -
505 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
506 -
507 -[[image:image-20230214094316-4.png]]
508 -
509 -
510 -= 4. Build-in Server =
511 -
512 -
513 -Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
514 -
515 -[[image:image-20230616175617-8.png||height="390" width="894"]]
516 -
517 -[[image:image-20230616175558-7.png||height="362" width="894"]]
518 -
519 -
520 -
521 521  (% style="color:red" %)**Note:**
522 522  
523 - **Path**: Server ~-~-> Network Server
388 + **Path**: System ~-~-> Built-in Server
524 524  
525 - Server ~-~-> Application Server
526 526  
527 -
528 528  **Troubleshooting:**
529 529  
530 530  
531 531  **~ 1. URL does not jump properly**
532 532  
533 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
396 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
534 534  
535 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
398 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
536 536  
537 537  
538 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
539 539  
402 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
540 540  
541 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
542 542  
405 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
406 +
543 543  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
544 544  
545 545  
546 546  Login account:
547 547  
548 -**Username : ** (% style="background-color:yellow" %)**admin**
412 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
549 549  
550 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
414 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
551 551  
552 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
553 553  
417 +[[image:image-20220725171719-1.png||height="570" width="769"]]
554 554  
555 555  
556 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
557 557  
421 +== **4.2 Application Server ~-~- Node-Red** ==
558 558  
559 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
560 560  
561 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
562 -
563 -[[image:image-20230321092456-1.png]]
564 -
565 -
566 -
567 -== 4.2 Application Server ~-~- Node-Red ==
568 -
569 -
570 570  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
571 571  
572 572  
... ... @@ -577,104 +577,16 @@
577 577  
578 578  
579 579  
580 -=== **Using Node-Red, InfluxDB and Grafana** ===
434 += **5. How users can access LPS8v2 using serial USB** =
581 581  
582 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
583 583  
437 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
584 584  
585 -the users can refer to this link to install them.
586 586  
587 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
440 +Port 1 of the UART on the LPS8v2 is GND
588 588  
589 -
590 -=== **Upgrade the node.js** ===
591 -
592 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
593 -
594 -
595 -the users can refer to this link to upgrade them.
596 -
597 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
598 -
599 -
600 -== 4.3 How to disable the built-in server ==
601 -
602 -
603 -Use the following commands to start and stop the TTNv3 service:
604 -
605 605  (% class="box infomessage" %)
606 606  (((
607 -**# start**
608 -systemctl start ttnstack
609 -
610 -**# stop**
611 -systemctl stop ttnstack
612 -
613 -**# enable**
614 -systemctl enable ttnstack
615 -
616 -**#disable**
617 -systemctl disable ttnstack
618 -)))
619 -
620 -Use the following commands to start and stop the Node-Red service:
621 -
622 -(% class="box infomessage" %)
623 -(((
624 -**# start**
625 -systemctl start nodered
626 -
627 -**# stop**
628 -systemctl stop nodered
629 -
630 -**# enable**
631 -systemctl enable nodered
632 -
633 -**#disable**
634 -systemctl disable nodered
635 -)))
636 -
637 -
638 -== 4.4 How to use ChirpStack on LPS8-V2 ==
639 -
640 -
641 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
642 -
643 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
644 -
645 -
646 -=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
647 -
648 -
649 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
650 -
651 -If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
652 -
653 -[[image:image-20230602140406-3.png||height="480" width="918"]]
654 -
655 -
656 -When the configuration is complete, click** "Save&Apply"**.
657 -
658 -
659 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
660 -
661 -[[image:image-20230602143122-4.png||height="511" width="983"]]
662 -
663 -
664 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
665 -
666 -
667 -
668 -= 6. How users can access LPS8-V2 using serial USB =
669 -
670 -
671 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
672 -
673 -
674 -Port 1 of the UART on the LPS8-V2 is GND
675 -
676 -(% class="box infomessage" %)
677 -(((
678 678  **TXD  <~-~--> UART RXD (Gray line)**
679 679  
680 680  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -685,9 +685,10 @@
685 685  
686 686  **LPS8v2 UART connection photo**
687 687  
454 +[[image:image-20220804163015-1.png||height="621" width="466"]]
688 688  
689 -[[image:image-20230421094319-2.png||height="351" width="392"]]
690 690  
457 +
691 691  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
692 692  
693 693  
... ... @@ -697,176 +697,128 @@
697 697  [[image:image-20220804164747-2.png||height="622" width="594"]]
698 698  
699 699  
700 -= 7. OTA System Update =
701 701  
468 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
702 702  
703 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
704 704  
471 +== **Step 1: Configure Frequency Band** ==
705 705  
706 -== 7.1 Auto-update method ==
707 707  
474 +//Each country has a requirement for frequency region. Choose the right one for your area.//
708 708  
709 -The default, each gateway will enable the auto-update function.
476 +[[image:image-20220905164308-1.png]]
710 710  
711 -this function will be triggered every boot and every midnight.
712 712  
713 713  
714 -Users can enable/disable it via Web Page
480 +== **Step 2: Configure the forward address** ==
715 715  
716 -[[image:image-20230607094447-2.png]]
717 717  
483 +**Select one of the servers to configure.**
718 718  
719 -== 7.2 Manual upgrade method ==
485 +**For example:**
720 720  
487 +[[image:image-20220905164847-2.png]]
721 721  
722 -1). Using the Linux command to upgrade the system
723 723  
724 724  
725 -(% class="box infomessage" %)
726 -(((
727 -**apt update && apt install *dragino***
728 -)))
491 +== **Step 3: Download and Install the Helium-gateway-rs** ==
729 729  
730 730  
731 -2). Upgrade the system via the Web page button of "Manual Update"
494 +**Access the gateway CLI via SSH.**
732 732  
496 +[[image:image-20220905165222-3.png]]
733 733  
734 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
735 735  
736 -[[image:image-20230607093849-1.png]]
499 +**Download gateway-rs.**
737 737  
501 +[[image:image-20220905165715-5.png]]
738 738  
739 -= 8. FAQ =
503 +(% class="box infomessage" %)
504 +(((
505 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
506 +)))
740 740  
741 -== 8.1 How to change Hostname ==
742 742  
509 +**Install gateway-rs.**
743 743  
744 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
511 +[[image:image-20220905165917-7.png]]
745 745  
746 746  (% class="box infomessage" %)
747 747  (((
748 -hostnamectl set-hostname dragino-123456
515 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
749 749  )))
750 750  
751 -[[image:image-20230517102429-1.png]]
752 752  
753 -After the configuration is complete, run "reboot" to restart the gateway.
519 +**Modify configuration.**
754 754  
755 755  
756 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
522 +[[image:image-20220905173847-12.png]]
757 757  
758 758  
759 -Migrate guide:
525 +(% class="box infomessage" %)
526 +(((
527 +**region=<Enter regional parameters> \
528 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
529 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
530 +)))
760 760  
761 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
762 762  
763 -**2. On the Server ~-~-> Network Server interface, click "Management"**
533 +**Restart the helium_gateway**
764 764  
765 -[[image:image-20230616162454-1.png]]
535 +[[image:image-20220905170920-9.png]]
766 766  
767 767  
768 -**3. Click "Migrate-Chirpstack"**
538 +(% class="box infomessage" %)
539 +(((
540 +**systemctl restart helium_gateway**
541 +)))
769 769  
770 -[[image:image-20230616162742-2.png]]
771 771  
544 +**Check the helium_gateway Log：**
772 772  
773 -**4. Strat Install **
546 +[[image:image-20220905173952-13.png]]
774 774  
775 775  
776 -Click start Install and wait until the migration succeeds
549 +(% class="box infomessage" %)
550 +(((
551 +**journalctl -u helium_gateway -f**
552 +)))
777 777  
778 -[[image:image-20230616162934-3.png]]
779 779  
555 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
780 780  
781 -**5.Migration complete check result**
557 +where the helium gateway log is shown:
782 782  
783 -[[image:image-20230616174526-4.png||height="706" width="983"]]
559 +[[image:image-20220905174534-14.png]]
784 784  
785 785  
786 -[[image:image-20230616180004-9.png]]
562 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
787 787  
788 788  
789 789  
790 -= 9. Trouble Shooting =
566 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**7. Supports**(%%) =
791 791  
792 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
793 793  
794 -
795 -[[image:image-20220920135918-1.png]]
796 -
797 -
798 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
799 -
800 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
801 -
802 -
803 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
804 -
805 -**Click the update URL button to configure the URL with the current eth port address.**
806 -
807 -[[image:image-20220920141936-2.png]]
808 -
809 -
810 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
811 -
812 -
813 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
814 -
815 -[[image:image-20230508171607-1.png]]
816 -
817 -
818 -== 9.3  Fallback IP does not work, how can users check ==
819 -
820 -
821 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
822 -
823 -
824 -**1.Check whether the configuration is correct**
825 -
826 -Run the CMD command to ipconfig and ping 172.31.255.254.
827 -
828 -If this fails, the user needs to reconfigure.
829 -
830 -[[image:image-20230413170224-3.png||height="433" width="707"]]
831 -
832 -[[image:image-20230413170246-4.png]]
833 -
834 -
835 -**2. Check whether the firewall is disabled**
836 -
837 -If the firewall is not down, this will affect access to the gateway.
838 -
839 -
840 -== 9.4  Click "Manual_Update", why there is no response? ==
841 -
842 -
843 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
844 -
845 -
846 -[[image:image-20230527090555-3.png||height="660" width="832"]]
847 -
848 -
849 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
850 -
851 -
852 852  (((
853 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
570 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
854 854  )))
855 855  
856 856  (((
857 -With your question as detailed as possible. We will reply and help you in the shortest.
574 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
858 858  
859 859  
860 -= 11. Reference =
861 861  
578 += **8. Reference** =
862 862  
580 +
863 863  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
864 864  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
865 865  
584 +
866 866  
867 867  )))
868 868  
869 -= 12. Order Info =
588 += **9. Order Info** =
870 870  
871 871  
872 872  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -874,33 +874,26 @@
874 874  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
875 875  
876 876  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
877 -
878 878  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
879 -
880 880  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
881 -
882 882  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
883 -
884 884  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
885 -
886 886  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
887 887  
888 888  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
889 889  
890 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
604 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
605 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
606 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
607 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
891 891  
892 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
893 -
894 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
895 -
896 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
897 -
898 898  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
899 899  
900 900  
901 -= 13. Manufacturer Info =
902 902  
613 += **10. Manufacturer Info** =
903 903  
615 +
904 904  **Shenzhen Dragino Technology Development co. LTD**
905 905  
906 906  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -908,9 +908,10 @@
908 908  LongCheng Street, LongGang District ; Shenzhen 518116,China
909 909  
910 910  
911 -= 14. FCC Warning =
912 912  
624 += **11. FCC Warning** =
913 913  
626 +
914 914  (((
915 915  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
916 916  )))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0