Last modified by Kilight Cao on 2025/02/08 14:05
<
From version < 226.1 >
edited by Kilight Cao
on 2023/06/16 18:06
To version < 69.3 >
edited by Xiaoling
on 2022/07/28 16:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -13,39 +13,27 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 -(((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -)))
22 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
28 28  
29 -(((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 -)))
24 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
32 32  
33 -(((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 -)))
26 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
36 36  
37 -(((
38 38  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 -)))
40 40  
41 -(((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 -)))
30 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
34 +== **1.2 Specifications** ==
48 48  
36 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,18 +57,17 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
51 +* Work Temperature: -20 ~~ 65°C
52 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
70 70  
56 +== **1.3 Features** ==
71 71  
58 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -81,261 +81,122 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
71 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
72 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
88 88  
89 89  
90 -LPS8-V2 has totally four LEDs, They are:
76 +== **1.4 Block Diagram** ==
91 91  
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
80 +== **1.5 LED Indicators** ==
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
83 +LPS8-V2 has totally four LEDs, They are:
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
86 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
89 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
107 107  
108 -== 1.5 Button Intruction ==
109 109  
92 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
110 110  
111 -LPS8-V2 has a black toggle button, which is:
94 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
112 112  
96 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
113 113  
114 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
98 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
117 117  
101 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
105 += **2. Quick Start** =
123 123  
124 -= 2. Quick Start =
125 -
126 -
127 127  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
128 128  
129 129  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
130 130  
131 131  
132 -== 2.1 Connects to the network and accesses the gateway Web UI ==
112 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
133 133  
134 -=== 2.1.1 connect the network ===
135 135  
115 +== **2.1.1 connect the network.** ==
136 136  
137 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
117 +=== ===
138 138  
119 +=== **Method 1**: Connect via Ethernet with DHCP IP from the router ===
139 139  
140 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
121 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
141 141  
142 -(% style="background-color:yellow" %)**dragino+dragino**
143 -
144 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
145 -
146 -[[image:image-20230527084515-1.png]]
147 -
148 -[[image:image-20230527085250-2.png||height="495" width="284"]]
149 -
150 -
151 -
152 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
153 -
154 -
155 -(((
156 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
157 -)))
158 -
159 -(((
160 160  You can also use this IP to connect.
161 -)))
162 162  
163 163  [[image:image-20220622100129-1.png||height="332" width="1263"]]
164 164  
165 165  
128 +=== **Method 2**: Connect via WiFi with DHCP IP from the router ===
166 166  
167 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
168 168  
131 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
169 169  
170 -[[image:image-20230107084650-2.png||height="310" width="839"]]
171 171  
134 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
172 172  
173 -(% style="color:blue" %)**Steps to connect via fallback IP:**
174 174  
175 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
137 +**Steps to connect via fallback IP:**
176 176  
177 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
139 +~1. Connect PC’s Ethernet port to LPS8-V2's WAN port
178 178  
141 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
179 179  
180 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
143 +[[image:image-20220622101433-4.png]]
181 181  
182 182  
183 -As in the below photo:
146 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
184 184  
185 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
186 186  
149 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
187 187  
188 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
189 189  
190 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
152 +Fill in the WiFi information by checking the box and clicking **Save&Apply**
191 191  
192 192  
193 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
194 -
195 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
196 -
197 -
198 -
199 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
200 -
201 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
202 -
203 -
204 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
205 -
206 -
207 207  [[image:image-20220622102702-6.png]]
208 208  
209 209  
210 -
211 211  **Wi-Fi configuration successful**
212 212  
213 213  
214 214  [[image:image-20220622102847-7.png]]
215 215  
163 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
216 216  
217 -[[image:image-20220622102901-8.png||height="476" width="938"]]
218 218  
219 219  
220 -=== 2.1.2 Access Configure Web UI ===
221 221  
168 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
222 222  
223 -**Web Interface**
224 224  
225 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
171 +=== **2.2.1 Select your area frequency** ===
226 226  
227 -
228 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
229 -
230 -You will see the login interface of LPS8-V2 as shown below.
231 -
232 -The account details for Web Login are:
233 -
234 -(% style="color:blue" %)**User Name: root**
235 -
236 -(% style="color:blue" %)**Password:   dragino**
237 -
238 -[[image:image-20230106153501-1.png||height="367" width="894"]]
239 -
240 -
241 -== 2.2  Typical Network Setup ==
242 -
243 -=== 2.2.1  Overview ===
244 -
245 -
246 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
247 -
248 -* **WAN Port Internet Mode**
249 -
250 -* **WiFi Client Mode**
251 -
252 -* **Cellular Mode**
253 -
254 -=== 2.2.2  Use WAN port to access Internet ===
255 -
256 -
257 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 -
259 -
260 -[[image:image-20230411100633-2.png||height="501" width="935"]]
261 -
262 -
263 -=== 2.2.3  Access the Internet as a WiFi Client ===
264 -
265 -
266 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 -
268 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 -
270 -[[image:image-20230411095739-1.png||height="264" width="691"]]
271 -
272 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 -
274 -
275 -=== 2.2.4  Use built-in 4G modem for internet access ===
276 -
277 -
278 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 -
280 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 -
282 -
283 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 -
285 -First, install the Micro SIM card as below direction
286 -
287 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 -
289 -
290 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 -
292 -
293 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 -
295 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 -
297 -
298 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 -
300 -
301 -=== 2.2.5  Check Internet connection ===
302 -
303 -
304 -In the **home** page, we can check the Internet connection.
305 -
306 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
307 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
308 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
309 -
310 -[[image:image-20230411101534-3.png||height="544" width="942"]]
311 -
312 -
313 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
314 -
315 -=== 2.3.1 Select your area frequency ===
316 -
317 -
318 -(((
319 319  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
320 320  
321 -
322 -)))
175 +[[image:image-20220622103332-9.png]]
323 323  
324 -[[image:image-20220622103332-9.png||height="485" width="938"]]
325 325  
178 +=== **2.2.2 Get the only gateway EUI** ===
326 326  
327 -=== 2.3.2 Get the only gateway EUI ===
328 -
329 -
330 330  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
331 331  
182 +[[image:image-20220622103355-10.png]]
332 332  
333 -[[image:image-20220622103355-10.png||height="698" width="949"]]
334 334  
185 +**Note: Choose the cluster that corresponds to a specific Gateway server address**
335 335  
336 -(% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
337 -
338 -
339 339  **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
340 340  
341 341  **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
... ... @@ -348,14 +348,13 @@
348 348  [[image:image-20220622103956-12.png]]
349 349  
350 350  
351 -=== 2.3.3 Register the gateway to The Things Network ===
352 352  
200 +== 2.2.3 Register the gateway to The Things Network ==
353 353  
354 354  **Login to The Things Network**
355 355  
356 356  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
357 357  
358 -
359 359  **Add the gateway**
360 360  
361 361  [[image:image-20220622104252-13.png||height="511" width="953"]]
... ... @@ -364,541 +364,198 @@
364 364  **Get it online**
365 365  
366 366  
367 -= 3. Web Configure Pages =
214 += **3. Web Configure Pages** =
368 368  
369 -== 3.1 Home ==
370 370  
217 +== **3.1 Home** ==
371 371  
372 -Shows the system running status:
219 +//Shows the system running status~://
373 373  
374 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
221 +== **3.2 LoRa Settings** ==
375 375  
376 376  
377 -== 3.2 LoRa Settings ==
224 +=== **3.2.1 LoRa ~-~-> LoRa** ===
378 378  
379 -=== 3.2.1 LoRa ~-~-> LoRa ===
380 380  
227 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
381 381  
382 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
229 +//Different LPS8v2 hardware versions can support different frequency ranges~://
383 383  
384 -Different LPS8v2 hardware versions can support different frequency ranges:
231 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
232 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
385 385  
386 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
387 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
388 -
389 389  (% class="wikigeneratedid" %)
390 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
235 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page **LogRead ~-~-> LoRa Log**//
391 391  
392 -
393 393  (% class="wikigeneratedid" %)
394 394  [[image:image-20220616110739-1.png||height="372" width="682"]]
395 395  
396 396  
397 -(((
398 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
399 -)))
241 +//**Note ***: See this instruction for how to customize the frequency band~://
400 400  
243 +//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
401 401  
402 -== 3.3 LoRaWAN Settings ==
403 403  
404 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
246 +== **3.3 LoRaWAN Settings** ==
405 405  
406 406  
407 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
249 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
408 408  
409 409  
252 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
253 +
410 410  [[image:image-20220616111932-2.png||height="516" width="672"]]
411 411  
412 412  
413 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
257 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
414 414  
415 415  
416 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
260 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
417 417  
418 -
419 419  [[image:image-20220616113246-3.png||height="396" width="672"]]
420 420  
421 421  
422 -(((
423 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
424 -)))
265 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
425 425  
426 426  
427 -== 3.4 Network Settings ==
268 +== **3.4 Network Settings** ==
428 428  
429 -=== 3.4.1 Network ~-~-> WiFi ===
430 430  
271 +=== **3.4.1 Network ~-~-> WiFi** ===
431 431  
273 +
432 432  [[image:image-20220616114756-4.png||height="251" width="669"]]
433 433  
434 434  
435 -=== 3.4.2 Network ~-~-> System Status ===
277 +=== **3.4.2 Network ~-~-> System Status** ===
436 436  
437 437  
438 -[[image:image-20220820134112-2.png||height="539" width="668"]]
280 +[[image:image-20220616115229-5.png||height="548" width="665"]]
439 439  
440 440  
441 -=== 3.4.3 Network ~-~-> Network ===
283 +=== **3.4.3 Network ~-~-> Firewall** ===
442 442  
443 443  
444 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
286 +[[image:image-20220616115351-6.png||height="244" width="661"]]
445 445  
446 -[[image:image-20230214093657-2.png||height="333" width="858"]]
447 447  
289 +== **3.5 System** ==
448 448  
449 -=== 3.4.4 Network ~-~-> Cellular ===
450 450  
292 +=== **3.5.1  System ~-~-> System Overview** ===
451 451  
452 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
453 453  
454 -(% style="color:red" %)**Note: APN cannot be empty.**
455 -
456 -[[image:image-20230228115126-1.png]]
457 -
458 -
459 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
460 -
461 -[[image:image-20230228115535-2.png||height="478" width="888"]]
462 -
463 -
464 -== 3.5 System ==
465 -
466 -=== 3.5.1 System ~-~-> System Overview ===
467 -
468 -
469 469  Shows the system info:
470 470  
471 -[[image:image-20220917144512-5.png||height="618" width="853"]]
472 472  
298 +=== **3.5.2 System ~-~-> Backup/Restore** ===
473 473  
474 -=== 3.5.2 System ~-~-> System General ===
475 475  
301 +[[image:image-20220616115808-7.png||height="194" width="649"]]
476 476  
477 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
478 478  
479 -In addition, Users can customize the FallBack IP address.
480 480  
481 -[[image:image-20230214094058-3.png]]
305 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
482 482  
483 483  
484 -=== 3.5.3 System ~-~-> Backup/Restore ===
308 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: **The Things Network - Stack (Open Source 3.19 Version).**
485 485  
310 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
486 486  
487 -[[image:image-20220917144725-6.png||height="208" width="869"]]
488 488  
313 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
489 489  
490 -=== 3.5.4 System ~-~-> Remoteit ===
491 491  
492 -
493 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
494 -
495 -
496 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
497 -
498 -[[image:image-20221230092303-2.png]]
499 -
500 -
501 -=== 3.5.5 System ~-~-> Package Management ===
502 -
503 -
504 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
505 -
506 -[[image:image-20230214094316-4.png]]
507 -
508 -
509 -= 4. Build-in Server =
510 -
511 -
512 -Since software version 0603,
513 -
514 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: ChirpStack(% style="color:blue" %)**.**
515 -
516 -[[image:image-20230616175617-8.png||height="390" width="894"]]
517 -
518 -[[image:image-20230616175558-7.png||height="362" width="894"]]
519 -
520 -
521 -
522 -(% style="color:red" %)**Note:**
523 -
524 - **Path**: Server ~-~-> Network Server and Server ~-~-> Application Server
525 -
526 -
527 -**Troubleshooting:**
528 -
529 -
530 -**~ 1. URL does not jump properly**
531 -
532 - For the ChirpStack, you can use the local IP address and the port is 8080 to access it.
533 -
534 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
535 -
536 -
537 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
538 -
539 -
540 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
541 -
542 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
543 -
544 -
545 545  Login account:
546 546  
547 -**Username : ** (% style="background-color:yellow" %)**admin**
318 +**User ID: ** (% class="mark" %)admin
548 548  
549 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
320 +**Password: ** (% class="mark" %)dragino
550 550  
551 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
552 552  
323 +[[image:image-20220725171719-1.png||height="570" width="769"]]
553 553  
325 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
326 + You can complete the installation manually with the following command.(%%)**
554 554  
555 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
556 556  
557 -
558 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
559 -
560 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
561 -
562 -[[image:image-20230321092456-1.png]]
563 -
564 -
565 -== 4.2 Application Server ~-~- Node-Red ==
566 -
567 -
568 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
569 -
570 -
571 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
572 -
573 -
574 -[[image:image-20220725172124-3.png||height="610" width="843"]]
575 -
576 -
577 -
578 -=== **Using Node-Red, InfluxDB and Grafana** ===
579 -
580 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
581 -
582 -
583 -the users can refer to this link to install them.
584 -
585 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
586 -
587 -
588 -=== **Upgrade the node.js** ===
589 -
590 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
591 -
592 -
593 -the users can refer to this link to upgrade them.
594 -
595 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
596 -
597 -
598 -== 4.3 How to disable the built-in server ==
599 -
600 -
601 -Use the following commands to start and stop the TTNv3 service:
602 -
603 603  (% class="box infomessage" %)
604 604  (((
605 -**# start**
606 -systemctl start ttnstack
331 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
607 607  
608 -**# stop**
609 -systemctl stop ttnstack
610 -
611 -**# enable**
612 -systemctl enable ttnstack
613 -
614 -**#disable**
615 -systemctl disable ttnstack
333 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
616 616  )))
617 617  
618 -Use the following commands to start and stop the Node-Red service:
619 619  
620 -(% class="box infomessage" %)
621 -(((
622 -**# start**
623 -systemctl start nodered
337 += **5. Build-in Application Server ~-~- Node-Red** =
624 624  
625 -**# stop**
626 -systemctl stop nodered
627 627  
628 -**# enable**
629 -systemctl enable nodered
340 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: **Node-Red.**
630 630  
631 -**#disable**
632 -systemctl disable nodered
633 -)))
342 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
634 634  
635 635  
636 -== 4.4 How to use ChirpStack on LPS8-V2 ==
345 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
637 637  
347 +[[image:image-20220725172124-3.png||height="610" width="843"]]
638 638  
639 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
640 640  
641 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
642 642  
351 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
352 + You can complete the installation manually with the following command.(%%)**
643 643  
644 -=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
645 645  
646 -
647 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
648 -
649 -If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
650 -
651 -[[image:image-20230602140406-3.png||height="480" width="918"]]
652 -
653 -
654 -When the configuration is complete, click** "Save&Apply"**.
655 -
656 -
657 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
658 -
659 -[[image:image-20230602143122-4.png||height="511" width="983"]]
660 -
661 -
662 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
663 -
664 -
665 -
666 -= 6. How users can access LPS8-V2 using serial USB =
667 -
668 -
669 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
670 -
671 -
672 -Port 1 of the UART on the LPS8-V2 is GND
673 -
674 674  (% class="box infomessage" %)
675 675  (((
676 -**TXD  <~-~--> UART RXD (Gray line)**
677 -
678 -**RXD  <~-~--> UART TXD (White line)**
679 -
680 -**GND <~-~--> GND (Black line)**
357 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
358 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
681 681  )))
682 682  
361 +[[image:image-20220728102000-1.png]]
683 683  
684 -**LPS8v2 UART connection photo**
685 685  
364 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
686 686  
687 -[[image:image-20230421094319-2.png||height="351" width="392"]]
688 -
689 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
690 -
691 -
692 -[[image:image-20220804164928-3.png||height="320" width="332"]]
693 -
694 -
695 -[[image:image-20220804164747-2.png||height="622" width="594"]]
696 -
697 -
698 -= 7. OTA System Update =
699 -
700 -
701 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
702 -
703 -
704 -== 7.1 Auto-update method ==
705 -
706 -
707 -The default, each gateway will enable the auto-update function.
708 -
709 -this function will be triggered every boot and every midnight.
710 -
711 -
712 -Users can enable/disable it via Web Page
713 -
714 -[[image:image-20230607094447-2.png]]
715 -
716 -
717 -== 7.2 Manual upgrade method ==
718 -
719 -
720 -1). Using the Linux command to upgrade the system
721 -
722 -
723 -(% class="box infomessage" %)
724 724  (((
725 -**apt update && apt install *dragino***
367 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
726 726  )))
727 727  
728 -
729 -2). Upgrade the system via the Web page button of "Manual Update"
730 -
731 -
732 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
733 -
734 -[[image:image-20230607093849-1.png]]
735 -
736 -
737 -= 8. FAQ =
738 -
739 -== 8.1 How to change Hostname ==
740 -
741 -
742 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
743 -
744 -(% class="box infomessage" %)
745 745  (((
746 -hostnamectl set-hostname dragino-123456
747 -)))
371 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
748 748  
749 -[[image:image-20230517102429-1.png]]
750 750  
751 -After the configuration is complete, run "reboot" to restart the gateway.
374 += **11 Reference** =
752 752  
753 -
754 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
755 -
756 -
757 -Migrate guide:
758 -
759 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
760 -
761 -**2. On the Server ~-~-> Network Server interface, click "Management"**
762 -
763 -[[image:image-20230616162454-1.png]]
764 -
765 -
766 -**3. Click "Migrate-Chirpstack"**
767 -
768 -[[image:image-20230616162742-2.png]]
769 -
770 -
771 -**4. Strat Install **
772 -
773 -
774 -Click start Install and wait until the migration succeeds
775 -
776 -[[image:image-20230616162934-3.png]]
777 -
778 -
779 -**5.Migration complete check result**
780 -
781 -[[image:image-20230616174526-4.png||height="706" width="983"]]
782 -
783 -
784 -[[image:image-20230616180004-9.png]]
785 -
786 -
787 -
788 -= 9. Trouble Shooting =
789 -
790 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
791 -
792 -
793 -[[image:image-20220920135918-1.png]]
794 -
795 -
796 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
797 -
798 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
799 -
800 -
801 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
802 -
803 -**Click the update URL button to configure the URL with the current eth port address.**
804 -
805 -[[image:image-20220920141936-2.png]]
806 -
807 -
808 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
809 -
810 -
811 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
812 -
813 -[[image:image-20230508171607-1.png]]
814 -
815 -
816 -== 9.3  Fallback IP does not work, how can users check ==
817 -
818 -
819 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
820 -
821 -
822 -**1.Check whether the configuration is correct**
823 -
824 -Run the CMD command to ipconfig and ping 172.31.255.254.
825 -
826 -If this fails, the user needs to reconfigure.
827 -
828 -[[image:image-20230413170224-3.png||height="433" width="707"]]
829 -
830 -[[image:image-20230413170246-4.png]]
831 -
832 -
833 -**2. Check whether the firewall is disabled**
834 -
835 -If the firewall is not down, this will affect access to the gateway.
836 -
837 -
838 -== 9.4  Click "Manual_Update", why there is no response? ==
839 -
840 -
841 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
842 -
843 -
844 -[[image:image-20230527090555-3.png||height="660" width="832"]]
845 -
846 -
847 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
848 -
849 -
850 -(((
851 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
852 -)))
853 -
854 -(((
855 -With your question as detailed as possible. We will reply and help you in the shortest.
856 -
857 -
858 -= 11. Reference =
859 -
860 -
861 861  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
862 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
863 863  
864 864  
865 865  )))
866 866  
867 -= 12. Order Info =
381 += **12. Order Info** =
868 868  
869 -
870 870  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
871 871  
872 872  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
873 873  
874 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
387 +* **AS923**: LoRaWAN AS923 band
388 +* **AU915**: LoRaWAN AU915 band
389 +* **EU868**: LoRaWAN EU868 band
390 +* **KR920**: LoRaWAN KR920 band
391 +* **US915**: LoRaWAN US915 band
392 +* **IN865**: LoRaWAN IN865 band
875 875  
876 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
877 -
878 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
879 -
880 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
881 -
882 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
883 -
884 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
885 -
886 886  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
887 887  
888 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
396 +* ** E**: EMEA, Korea, Thailand, India.
397 +* ** A**: North America/ Rogers/AT&T/T-Mobile.
398 +* ** AU**: Latin America, New Zeland, Taiwan
399 +* ** J**: Japan, DOCOMO/SoftBank/ KDDI
889 889  
890 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
891 -
892 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
893 -
894 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
895 -
896 896  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
897 897  
898 898  
899 -= 13. Manufacturer Info =
404 += **13. Manufacturer Info** =
900 900  
901 -
902 902  **Shenzhen Dragino Technology Development co. LTD**
903 903  
904 904  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -906,38 +906,21 @@
906 906  LongCheng Street, LongGang District ; Shenzhen 518116,China
907 907  
908 908  
909 -= 14. FCC Warning =
413 += **14. FCC Warning** =
910 910  
911 -
912 -(((
913 913  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
914 -)))
915 915  
916 -(((
917 917  ~-~- Reorient or relocate the receiving antenna.
918 -)))
919 919  
920 -(((
921 921  ~-~- Increase the separation between the equipment and receiver.
922 -)))
923 923  
924 -(((
925 925  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
926 -)))
927 927  
928 -(((
929 929  ~-~- Consult the dealer or an experienced radio/TV technician for help.
930 -)))
931 931  
932 932  
933 -(((
934 934  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
935 -)))
936 936  
937 937  
938 -(((
939 939  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
940 -
941 -
942 942  )))
943 -)))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0