Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 226.1 >
edited by Kilight Cao
on 2023/06/16 18:06
To version < 318.1 >
edited by Xiaoye
on 2024/07/18 10:55
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 -- LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents：**
11 +**Table of Contents:**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -18,7 +18,7 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== 1.1 What is LPS8v2 ==
21 +== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
22 22  
23 23  
24 24  (((
... ... @@ -81,7 +81,7 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
84 +* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 87  == 1.4 LED Indicators ==
... ... @@ -96,11 +96,11 @@
96 96  
97 97  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
103 + ✓**  SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 105  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
... ... @@ -121,6 +121,18 @@
121 121   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
123 123  
124 +(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 +
126 +See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 +
128 +
129 +When the gateway restores the factory settings is complete,
130 +
131 +The WiFi configuration will enable WiFi Access Point by default.
132 +
133 +The other configuration will be restored to the default configuration.
134 +
135 +
124 124  = 2. Quick Start =
125 125  
126 126  
... ... @@ -129,9 +129,9 @@
129 129  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
130 130  
131 131  
132 -== 2.1 Connects to the network and accesses the gateway Web UI ==
144 +== 2.1 Access and Configure LPS8-V2 ==
133 133  
134 -=== 2.1.1 connect the network ===
146 +=== 2.1.1 Find IP address of LPS8-V2 ===
135 135  
136 136  
137 137  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -148,7 +148,6 @@
148 148  [[image:image-20230527085250-2.png||height="495" width="284"]]
149 149  
150 150  
151 -
152 152  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
153 153  
154 154  
... ... @@ -163,7 +163,6 @@
163 163  [[image:image-20220622100129-1.png||height="332" width="1263"]]
164 164  
165 165  
166 -
167 167  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
168 168  
169 169  
... ... @@ -187,7 +187,7 @@
187 187  
188 188  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
189 189  
190 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
200 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
191 191  
192 192  
193 193  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -195,7 +195,6 @@
195 195  [[image:image-20230111094247-2.png||height="619" width="1250"]]
196 196  
197 197  
198 -
199 199  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
200 200  
201 201  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -235,7 +235,7 @@
235 235  
236 236  (% style="color:blue" %)**Password:   dragino**
237 237  
238 -[[image:image-20230106153501-1.png||height="367" width="894"]]
247 +[[image:image-20240318160845-1.png]]
239 239  
240 240  
241 241  == 2.2  Typical Network Setup ==
... ... @@ -298,6 +298,9 @@
298 298  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 299  
300 300  
310 +**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
311 +
312 +
301 301  === 2.2.5  Check Internet connection ===
302 302  
303 303  
... ... @@ -428,8 +428,9 @@
428 428  
429 429  === 3.4.1 Network ~-~-> WiFi ===
430 430  
443 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
431 431  
432 -[[image:image-20220616114756-4.png||height="251" width="669"]]
445 +[[image:image-20230619095946-1.png||height="332" width="827"]]
433 433  
434 434  
435 435  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -456,11 +456,16 @@
456 456  [[image:image-20230228115126-1.png]]
457 457  
458 458  
459 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
472 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
460 460  
461 461  [[image:image-20230228115535-2.png||height="478" width="888"]]
462 462  
463 463  
477 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
478 +
479 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
480 +
481 +
464 464  == 3.5 System ==
465 465  
466 466  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -468,7 +468,7 @@
468 468  
469 469  Shows the system info:
470 470  
471 -[[image:image-20220917144512-5.png||height="618" width="853"]]
489 +[[image:image-20231031162854-1.png]]
472 472  
473 473  
474 474  === 3.5.2 System ~-~-> System General ===
... ... @@ -484,12 +484,26 @@
484 484  === 3.5.3 System ~-~-> Backup/Restore ===
485 485  
486 486  
487 -[[image:image-20220917144725-6.png||height="208" width="869"]]
505 +[[image:image-20231031162927-2.png]]
488 488  
507 +=== 3.5.4 System ~-~-> Reboot / Reset ===
489 489  
490 -=== 3.5.4 System ~-~-> Remoteit ===
509 +In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
491 491  
511 +ETH LED will SOLID BULE Until the restore is finished.
492 492  
513 +When the gateway restores the factory settings is complete,
514 +
515 +The WiFi configuration will enable WiFi Access Point by default.
516 +
517 +The other configuration will be restored to the default configuration.
518 +
519 +[[image:image-20240203172853-1.png||height="365" width="901"]]
520 +
521 +
522 +=== 3.5.5 System ~-~-> Remoteit ===
523 +
524 +
493 493  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
494 494  
495 495  
... ... @@ -498,7 +498,7 @@
498 498  [[image:image-20221230092303-2.png]]
499 499  
500 500  
501 -=== 3.5.5 System ~-~-> Package Management ===
533 +=== 3.5.6 System ~-~-> Package Management ===
502 502  
503 503  
504 504  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -506,102 +506,114 @@
506 506  [[image:image-20230214094316-4.png]]
507 507  
508 508  
509 -= 4. Build-in Server =
541 +== 3.5 Logread ==
510 510  
543 +=== 3.5.1 LoRa Log ===
511 511  
512 -Since software version 0603,
513 513  
514 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: ChirpStack(% style="color:blue" %)**.**
546 +In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
515 515  
516 -[[image:image-20230616175617-8.png||height="390" width="894"]]
548 +[[image:image-20240416112509-1.png]]
517 517  
518 -[[image:image-20230616175558-7.png||height="362" width="894"]]
519 519  
551 +=== 3.5.2 Gateway Traffic ===
520 520  
553 +In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
521 521  
522 -(% style="color:red" %)**Note:**
555 +[[image:image-20240416112618-2.png||height="705" width="1122"]]
523 523  
524 - **Path**: Server ~-~-> Network Server and Server ~-~-> Application Server
525 525  
558 +=== 3.5.3 System Log ===
526 526  
527 -**Troubleshooting:**
560 +In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
528 528  
562 +[[image:image-20240416112649-3.png||height="820" width="1122"]]
529 529  
530 -**~ 1. URL does not jump properly**
531 531  
532 - For the ChirpStack, you can use the local IP address and the port is 8080 to access it.
565 +=== 3.5.4 Record Log ===
533 533  
534 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
567 +In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
535 535  
569 +[[image:image-20240416112712-4.png||height="319" width="1128"]]
536 536  
537 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
538 538  
539 539  
540 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
573 += 4. Build-in Server =
541 541  
542 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
575 +After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
543 543  
544 544  
545 -Login account:
578 +== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
546 546  
547 -**Username : ** (% style="background-color:yellow" %)**admin**
580 +[[image:image-20231106180816-4.png||height="416" width="896"]]
548 548  
549 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
582 +[[image:image-20231201165904-1.png||height="466" width="899"]]
550 550  
551 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
584 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
552 552  
586 +For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
553 553  
554 554  
555 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
556 556  
590 +== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
557 557  
558 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
559 559  
560 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
593 +[[image:image-20230616175558-7.png||height="362" width="894"]]
561 561  
562 -[[image:image-20230321092456-1.png]]
595 +[[image:image-20231201170355-2.png||height="536" width="899"]]
563 563  
597 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
564 564  
565 -== 4.2 Application Server ~-~- Node-Red ==
566 566  
567 567  
568 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
601 +== **3). Troubleshooting:** ==
569 569  
570 570  
571 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
604 +* (((
605 +=== ** If the URL does not jump properly.** ===
606 +)))
572 572  
608 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
573 573  
574 -[[image:image-20220725172124-3.png||height="610" width="843"]]
610 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
575 575  
576 576  
613 +* (((
614 +=== ** How to install InfluxDB, Garfana.** ===
615 +)))
577 577  
578 -=== **Using Node-Red, InfluxDB and Grafana** ===
617 + The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
579 579  
580 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
581 581  
620 +* (((
621 +=== ** How to upgrade the gateway node.js to the latest version.** ===
622 +)))
582 582  
583 -the users can refer to this link to install them.
624 + The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
584 584  
585 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
586 586  
627 +* (((
628 +=== ** How to batch register device on the built-in Chirpstack network server** ===
629 +)))
587 587  
588 -=== **Upgrade the node.js** ===
631 + The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
589 589  
590 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
591 591  
634 +* (((
635 +=== ** Why my gateway is not Chirpstack?** ===
636 +)))
592 592  
593 -the users can refer to this link to upgrade them.
638 + After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
594 594  
595 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
596 596  
641 +* (((
642 +=== ** How to disable the built-in server** ===
643 +)))
597 597  
598 -== 4.3 How to disable the built-in server ==
599 -
600 -
601 -Use the following commands to start and stop the TTNv3 service:
602 -
603 603  (% class="box infomessage" %)
604 604  (((
647 +Use the following commands to start and stop the TTNv3 service:**     **
648 +
605 605  **# start**
606 606  systemctl start ttnstack
607 607  
... ... @@ -615,10 +615,10 @@
615 615  systemctl disable ttnstack
616 616  )))
617 617  
618 -Use the following commands to start and stop the Node-Red service:
619 -
620 620  (% class="box infomessage" %)
621 621  (((
664 +Use the following commands to start and stop the Node-Red service:
665 +
622 622  **# start**
623 623  systemctl start nodered
624 624  
... ... @@ -633,34 +633,41 @@
633 633  )))
634 634  
635 635  
636 -== 4.4 How to use ChirpStack on LPS8-V2 ==
680 +* (((
681 +=== ** How to choose the Chirpstack server frequency SubBand** ===
682 +)))
637 637  
684 +**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
638 638  
639 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
686 + Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
640 640  
641 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
688 +[[image:image-20230602140406-3.png||height="480" width="918"]]
642 642  
643 643  
644 -=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
691 +When the configuration is complete, click** "Save&Apply"**.
645 645  
646 646  
647 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
694 +(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
648 648  
649 -If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
696 +[[image:image-20230602143122-4.png||height="511" width="983"]]
650 650  
651 -[[image:image-20230602140406-3.png||height="480" width="918"]]
652 652  
699 += 5. Watch Dog =
653 653  
654 -When the configuration is complete, click** "Save&Apply"**.
655 655  
702 +The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
656 656  
657 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
658 658  
659 -[[image:image-20230602143122-4.png||height="511" width="983"]]
705 +LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
660 660  
707 +The uses can be via the below method to enable Watch Dog:
661 661  
662 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
709 +(% class="box infomessage" %)
710 +(((
711 +wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
712 +)))
663 663  
714 +[[image:image-20231124113209-1.png||height="470" width="1157"]]
664 664  
665 665  
666 666  = 6. How users can access LPS8-V2 using serial USB =
... ... @@ -668,7 +668,6 @@
668 668  
669 669  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
670 670  
671 -
672 672  Port 1 of the UART on the LPS8-V2 is GND
673 673  
674 674  (% class="box infomessage" %)
... ... @@ -680,10 +680,8 @@
680 680  **GND <~-~--> GND (Black line)**
681 681  )))
682 682  
683 -
684 684  **LPS8v2 UART connection photo**
685 685  
686 -
687 687  [[image:image-20230421094319-2.png||height="351" width="392"]]
688 688  
689 689  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -719,7 +719,6 @@
719 719  
720 720  1). Using the Linux command to upgrade the system
721 721  
722 -
723 723  (% class="box infomessage" %)
724 724  (((
725 725  **apt update && apt install *dragino***
... ... @@ -728,17 +728,297 @@
728 728  
729 729  2). Upgrade the system via the Web page button of "Manual Update"
730 730  
778 +(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
731 731  
732 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
733 -
734 734  [[image:image-20230607093849-1.png]]
735 735  
736 736  
737 -= 8. FAQ =
783 += (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)8 How do I view gateway logs(%%) =
738 738  
739 -== 8.1 How to change Hostname ==
785 +=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)8.1 LoRaWAN Log:(%%) ===
740 740  
741 741  
788 +==== Semtech UDP Log : ====
789 +
790 +When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
791 +
792 +[[image:image-20231017112115-2.png||height="611" width="821"]]
793 +
794 +
795 +==== Station Log: ====
796 +
797 +When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
798 +
799 +[[image:image-20231017111606-1.png||height="622" width="821"]]
800 +
801 +
802 +=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)8.2  4G Log(%%) ===
803 +
804 +
805 +User needs to access the Linux console of the gateway and enter the following command:
806 +
807 +(% class="box infomessage" %)
808 +(((
809 +cat /var/log/qmilog.txt
810 +)))
811 +
812 +[[image:image-20231017114417-3.png||height="543" width="679"]]
813 +
814 +
815 +LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
816 +
817 +Below are some commands as reference:
818 +
819 +>Usage:  /usr/bin/quectel-CM [options]
820 +> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
821 +> -p pincode Verify sim card pin if sim card is locked
822 +> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
823 +> -f logfilename Save log message of this program to file
824 +> -u usbmonlog filename  Save usbmon log to file
825 +> -i interface Specify which network interface to setup data call when multi-modems exits
826 +> -4 Setup IPv4 data call (default)
827 +> -6 Setup IPv6 data call
828 +> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
829 +> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
830 +> -b Enable network interface bridge function (default 0)
831 +> -v Verbose log mode, for debug purpose.[Examples]
832 +>Example 1: /usr/bin/quectel-CM
833 +>Example 2: /usr/bin/quectel-CM -s 3gnet
834 +>Example 3: /usr/bin/quectel-CM -s 3gnet -v
835 +
836 +
837 +
838 +=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)8.3 Dmesg Log(%%) ===
839 +
840 +
841 +Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
842 +
843 +[[image:image-20231017115330-5.png||height="565" width="740"]]
844 +
845 +
846 +=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)8.4 Record Log(%%) ===
847 +
848 +
849 +Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
850 +
851 +[[image:image-20231017115124-4.png||height="215" width="880"]]
852 +
853 +
854 +=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)8.5 View gateway logs via Linux Command(%%) ===
855 +
856 +
857 +**Semtech UDP Log :**
858 +
859 +(% class="box infomessage" %)
860 +(((
861 +**journalctl -u draginofwd -f**
862 +)))
863 +
864 +[[image:image-20231207144627-1.png||height="371" width="1017"]]
865 +
866 +
867 +**Station Log:**
868 +
869 +(% class="box infomessage" %)
870 +(((
871 +**tail -f /var/log/station.log **
872 +)))
873 +
874 +[[image:image-20231207144758-2.png||height="132" width="1022"]]
875 +
876 +
877 +**Dmesg Log:**
878 +
879 +(% class="box infomessage" %)
880 +(((
881 +**dmesg**
882 +)))
883 +
884 +[[image:image-20231207145210-3.png||height="310" width="1021"]]
885 +
886 +
887 +
888 +(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
889 += (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)9. More Services(%%) =
890 +
891 +== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)9.1 NTP Service/Time Synchronization(%%) ==
892 +
893 +The gateway time sync service is provided by chrony service
894 +
895 +
896 +=== 1). Modify the NTP server address: ===
897 +
898 +(% class="box infomessage" %)
899 +(((
900 +Configuration file path:  /etc/chrony/chrony.conf
901 +)))
902 +
903 +
904 +=== 2). Start/Stop/Enable/Disable NTP service: ===
905 +
906 +(% class="box infomessage" %)
907 +(((
908 +systemctl start chrony
909 +\\systemctl stop chrony
910 +\\systemctl disable chrony
911 +\\systemctl enable chrony
912 +)))
913 +
914 +
915 +(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
916 += (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10. More features(%%) =
917 +
918 +(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
919 +== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)10.1 Chirpstack MQTT Forwarder(%%) ==
920 +
921 +
922 +ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
923 +
924 +
925 +(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
926 +=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
927 +
928 +In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
929 +
930 +(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
931 +By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
932 +
933 +* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
934 +* Configure the following settings:
935 +** **Service Provider:** //Custom / Private LoRaWAN//
936 +** **Server Address:** localhost
937 +** **Uplink Port:** 1700
938 +** **Downlink Port:** 1700
939 +* Click **Save & Apply**
940 +
941 +[[image:image-20240518145929-2.png||height="652" width="727"]]
942 +
943 +
944 +(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
945 +=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
946 +
947 +
948 +(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
949 +(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
950 +
951 +First you must login into the gateway using SSH:
952 +
953 +(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
954 +(((
955 +ssh root@GATEWAY-IP-ADDRESS
956 +)))
957 +
958 +(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
959 +The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
960 +
961 +
962 +(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
963 +(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
964 +
965 +(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
966 +Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
967 +
968 +(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
969 +(((
970 +cd /tmp
971 +wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
972 +)))
973 +
974 +
975 +(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
976 +(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
977 +
978 +Use the dpkg package-manager to install the downloaded package. Example:
979 +
980 +(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
981 +(((
982 +dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
983 +)))
984 +
985 +[[image:image-20240518152148-4.png]]
986 +
987 +
988 +(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
989 +**Configuration**
990 +
991 +To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
992 +
993 +(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
994 +This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
995 +
996 +
997 +**ChirpStack MQTT Forwarder Setting:**
998 +
999 +(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1000 +(((
1001 +topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
1002 +
1003 +server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1004 +)))
1005 +
1006 +username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1007 +
1008 +
1009 +Use commands to modify configuration files:
1010 +
1011 +(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1012 +(((
1013 +vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1014 +)))
1015 +
1016 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1017 +
1018 +
1019 +**(Re)start and stop commands**
1020 +
1021 +Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1022 +
1023 +(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1024 +(((
1025 +# start
1026 +
1027 +(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1028 +systemctl start chirpstack-mqtt-forwarder
1029 +
1030 +# stop
1031 +
1032 +systemctl stop chirpstack-mqtt-forwarder
1033 +
1034 +# restart
1035 +
1036 +systemctl restart chirpstack-mqtt-forwarder
1037 +)))
1038 +
1039 +(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1040 +(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1041 +
1042 +
1043 +**Check result**
1044 +
1045 +(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1046 +Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
1047 +
1048 +[[image:image-20240518154223-5.png]]
1049 +
1050 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1051 +
1052 +
1053 +== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.2 As a Data-only hotspot connect the helium blockchain(%%) ==
1054 +
1055 +
1056 +(% class="box infomessage" %)
1057 +(((
1058 +(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1059 +apt update && apt install helium-gateway
1060 +)))
1061 +
1062 +
1063 +
1064 += (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11. FAQ(%%) =
1065 +
1066 +== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)11.1 How to change Hostname(%%) ==
1067 +
1068 +
742 742  By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
743 743  
744 744  (% class="box infomessage" %)
... ... @@ -751,45 +751,76 @@
751 751  After the configuration is complete, run "reboot" to restart the gateway.
752 752  
753 753  
754 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
1081 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
755 755  
756 756  
757 757  Migrate guide:
758 758  
759 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
1086 +To stabilize the completion of the migration, The users can migrate in one of the following ways
760 760  
761 -**2. On the Server ~-~-> Network Server interface, click "Management"**
1088 +**Method 1. Using the Linux shell, **
762 762  
763 -[[image:image-20230616162454-1.png]]
1090 +**Method 2. Flash a new image with the Chirpstack**
764 764  
765 765  
766 -**3. Click "Migrate-Chirpstack"**
1093 +=== Method 1: Using the Linux shell ===
767 767  
768 -[[image:image-20230616162742-2.png]]
1095 +(% class="box infomessage" %)
1096 +(((
1097 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1098 +)))
769 769  
770 770  
771 -**4. Strat Install **
1101 +=== Method 2: Flash a new image ===
772 772  
1103 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
773 773  
774 -Click start Install and wait until the migration succeeds
775 775  
776 -[[image:image-20230616162934-3.png]]
1106 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
777 777  
778 778  
779 -**5.Migration complete check result**
1109 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
780 780  
781 -[[image:image-20230616174526-4.png||height="706" width="983"]]
1111 +[[image:image-20230719100239-1.png||height="724" width="994"]]
782 782  
783 783  
784 -[[image:image-20230616180004-9.png]]
1114 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
785 785  
1116 +[[image:image-20230719100332-2.png]]
786 786  
787 787  
788 -= 9. Trouble Shooting =
1119 +3. Disable the auto-update:
789 789  
790 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1121 +[[image:image-20230719100419-3.png||height="458" width="995"]]
791 791  
792 792  
1124 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
1125 +
1126 +
1127 +By default, the LPS8v2's built-in server is ChirpStack v4,
1128 +
1129 +If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1130 +
1131 +[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
1132 +
1133 +
1134 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
1135 +
1136 +
1137 +== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).5 DIN Mount Reference:(%%) ==
1138 +
1139 +
1140 +[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1141 +
1142 +[[image:image-20240318095617-2.png]]
1143 +
1144 +
1145 +
1146 +
1147 += (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12. Trouble Shooting(%%) =
1148 +
1149 +== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)12.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1150 +
793 793  [[image:image-20220920135918-1.png]]
794 794  
795 795  
... ... @@ -805,7 +805,7 @@
805 805  [[image:image-20220920141936-2.png]]
806 806  
807 807  
808 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1166 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
809 809  
810 810  
811 811  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -813,13 +813,13 @@
813 813  [[image:image-20230508171607-1.png]]
814 814  
815 815  
816 -== 9.3  Fallback IP does not work, how can users check ==
1174 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
817 817  
818 818  
819 819  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
820 820  
821 821  
822 -**1.Check whether the configuration is correct**
1180 +**~1. Check whether the configuration is correct**
823 823  
824 824  Run the CMD command to ipconfig and ping 172.31.255.254.
825 825  
... ... @@ -835,7 +835,7 @@
835 835  If the firewall is not down, this will affect access to the gateway.
836 836  
837 837  
838 -== 9.4  Click "Manual_Update", why there is no response? ==
1196 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
839 839  
840 840  
841 841  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -844,10 +844,40 @@
844 844  [[image:image-20230527090555-3.png||height="660" width="832"]]
845 845  
846 846  
847 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1205 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
848 848  
849 849  
1208 +Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1209 +
1210 +(% class="box infomessage" %)
850 850  (((
1212 +apt update && apt install *dragino*
1213 +
1214 +wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1215 +)))
1216 +
1217 +
1218 +== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
1219 +
1220 +
1221 +**1) Build-in The Things Network**
1222 +
1223 +Refer to this link to delete the Built-in server's device.
1224 +
1225 +[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1226 +
1227 +
1228 +**2) Build-in Chirpstack**
1229 +
1230 +Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1231 +
1232 +[[image:image-20231106180846-5.png||height="310" width="668"]]
1233 +
1234 +
1235 += (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)13. Supports(%%) =
1236 +
1237 +
1238 +(((
851 851  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
852 852  )))
853 853  
... ... @@ -855,7 +855,7 @@
855 855  With your question as detailed as possible. We will reply and help you in the shortest.
856 856  
857 857  
858 -= 11. Reference =
1246 += (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)14. Reference(%%) =
859 859  
860 860  
861 861  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -864,7 +864,7 @@
864 864  
865 865  )))
866 866  
867 -= 12. Order Info =
1255 += (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)15. Order Info(%%) =
868 868  
869 869  
870 870  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -896,7 +896,7 @@
896 896  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
897 897  
898 898  
899 -= 13. Manufacturer Info =
1287 += (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)16. Manufacturer Info(%%) =
900 900  
901 901  
902 902  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -906,7 +906,7 @@
906 906  LongCheng Street, LongGang District ; Shenzhen 518116,China
907 907  
908 908  
909 -= 14. FCC Warning =
1297 += (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)17. FCC Warning(%%) =
910 910  
911 911  
912 912  (((
Delete Device.docx
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +336.4 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +71.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0