Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 226.1 >
edited by Kilight Cao
on 2023/06/16 18:06
To version < 109.2 >
edited by Xiaoling
on 2022/09/17 14:52
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,18 +57,19 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
70 70  
71 71  
71 +
72 +== **1.3 Features** ==
73 +
74 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -81,79 +81,75 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
87 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
88 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 LED Indicators ==
88 88  
89 89  
90 -LPS8-V2 has totally four LEDs, They are:
91 91  
93 +== **1.4 Block Diagram** ==
92 92  
93 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
94 94  
95 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
96 96  
97 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
97 +== **1.5 LED Indicators** ==
98 98  
99 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
100 +LPS8-V2 has totally four LEDs, They are:
102 102  
103 - ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
103 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
106 106  
105 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
107 107  
108 -== 1.5 Button Intruction ==
107 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
109 109  
109 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
110 110  
111 -LPS8-V2 has a black toggle button, which is:
111 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
112 112  
113 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
113 113  
114 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
115 115  
116 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
117 117  
118 118  
119 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
119 +== **1.6 Button Intruction** ==
120 120  
121 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
122 122  
122 +LPS8-V2 has a black toggle button, which is:
123 123  
124 -= 2. Quick Start =
125 125  
125 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
126 126  
127 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
127 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
128 128  
129 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
130 130  
130 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
131 131  
132 -== 2.1 Connects to the network and accesses the gateway Web UI ==
132 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
133 133  
134 -=== 2.1.1 connect the network ===
135 135  
136 136  
137 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
136 += **2. Quick Start** =
138 138  
139 139  
140 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
139 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
141 141  
142 -(% style="background-color:yellow" %)**dragino+dragino**
141 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
143 143  
144 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
145 145  
146 -[[image:image-20230527084515-1.png]]
147 147  
148 -[[image:image-20230527085250-2.png||height="495" width="284"]]
145 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
149 149  
150 150  
148 +== **2.1.1 connect the network.** ==
151 151  
152 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
153 153  
151 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
154 154  
153 +
155 155  (((
156 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
155 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
157 157  )))
158 158  
159 159  (((
... ... @@ -164,43 +164,34 @@
164 164  
165 165  
166 166  
167 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
166 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
168 168  
169 169  
170 -[[image:image-20230107084650-2.png||height="310" width="839"]]
169 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
171 171  
172 172  
173 -(% style="color:blue" %)**Steps to connect via fallback IP:**
172 +(((
173 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
174 +)))
174 174  
175 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
176 176  
177 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
178 178  
178 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
179 179  
180 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
180 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
181 181  
182 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
182 182  
183 -As in the below photo:
184 184  
185 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
185 +[[image:image-20220622101433-4.png]]
186 186  
187 187  
188 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
188 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
189 189  
190 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
191 191  
191 +[[image:image-20220622102210-5.png||height="504" width="919"]]
192 192  
193 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
194 194  
195 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
196 -
197 -
198 -
199 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
200 -
201 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
202 -
203 -
204 204  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
205 205  
206 206  
... ... @@ -217,104 +217,13 @@
217 217  [[image:image-20220622102901-8.png||height="476" width="938"]]
218 218  
219 219  
220 -=== 2.1.2 Access Configure Web UI ===
221 221  
211 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
222 222  
223 -**Web Interface**
224 224  
225 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
214 +=== **2.2.1 Select your area frequency** ===
226 226  
227 227  
228 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
229 -
230 -You will see the login interface of LPS8-V2 as shown below.
231 -
232 -The account details for Web Login are:
233 -
234 -(% style="color:blue" %)**User Name: root**
235 -
236 -(% style="color:blue" %)**Password:   dragino**
237 -
238 -[[image:image-20230106153501-1.png||height="367" width="894"]]
239 -
240 -
241 -== 2.2  Typical Network Setup ==
242 -
243 -=== 2.2.1  Overview ===
244 -
245 -
246 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
247 -
248 -* **WAN Port Internet Mode**
249 -
250 -* **WiFi Client Mode**
251 -
252 -* **Cellular Mode**
253 -
254 -=== 2.2.2  Use WAN port to access Internet ===
255 -
256 -
257 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 -
259 -
260 -[[image:image-20230411100633-2.png||height="501" width="935"]]
261 -
262 -
263 -=== 2.2.3  Access the Internet as a WiFi Client ===
264 -
265 -
266 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 -
268 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 -
270 -[[image:image-20230411095739-1.png||height="264" width="691"]]
271 -
272 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 -
274 -
275 -=== 2.2.4  Use built-in 4G modem for internet access ===
276 -
277 -
278 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 -
280 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 -
282 -
283 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 -
285 -First, install the Micro SIM card as below direction
286 -
287 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 -
289 -
290 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 -
292 -
293 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 -
295 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 -
297 -
298 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 -
300 -
301 -=== 2.2.5  Check Internet connection ===
302 -
303 -
304 -In the **home** page, we can check the Internet connection.
305 -
306 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
307 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
308 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
309 -
310 -[[image:image-20230411101534-3.png||height="544" width="942"]]
311 -
312 -
313 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
314 -
315 -=== 2.3.1 Select your area frequency ===
316 -
317 -
318 318  (((
319 319  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
320 320  
... ... @@ -324,9 +324,10 @@
324 324  [[image:image-20220622103332-9.png||height="485" width="938"]]
325 325  
326 326  
327 -=== 2.3.2 Get the only gateway EUI ===
328 328  
227 +=== **2.2.2 Get the only gateway EUI** ===
329 329  
229 +
330 330  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
331 331  
332 332  
... ... @@ -348,9 +348,10 @@
348 348  [[image:image-20220622103956-12.png]]
349 349  
350 350  
351 -=== 2.3.3 Register the gateway to The Things Network ===
352 352  
252 +== **2.2.3 Register the gateway to The Things Network** ==
353 353  
254 +
354 354  **Login to The Things Network**
355 355  
356 356  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -364,30 +364,34 @@
364 364  **Get it online**
365 365  
366 366  
367 -= 3. Web Configure Pages =
368 368  
369 -== 3.1 Home ==
269 += **3. Web Configure Pages** =
370 370  
371 371  
372 -Shows the system running status:
272 +== **3.1 Home** ==
373 373  
274 +
275 +//Shows the system running status~://
276 +
374 374  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
375 375  
376 376  
377 -== 3.2 LoRa Settings ==
378 378  
379 -=== 3.2.1 LoRa ~-~-> LoRa ===
281 +== **3.2 LoRa Settings** ==
380 380  
381 381  
382 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
284 +=== **3.2.1 LoRa ~-~-> LoRa** ===
383 383  
384 -Different LPS8v2 hardware versions can support different frequency ranges:
385 385  
386 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
387 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
287 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
388 388  
289 +//Different LPS8v2 hardware versions can support different frequency ranges~://
290 +
291 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
292 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
293 +
389 389  (% class="wikigeneratedid" %)
390 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
295 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
391 391  
392 392  
393 393  (% class="wikigeneratedid" %)
... ... @@ -399,23 +399,26 @@
399 399  )))
400 400  
401 401  
402 -== 3.3 LoRaWAN Settings ==
403 403  
404 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
308 +== **3.3 LoRaWAN Settings** ==
405 405  
406 406  
407 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
311 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
408 408  
409 409  
314 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
315 +
316 +
410 410  [[image:image-20220616111932-2.png||height="516" width="672"]]
411 411  
412 412  
413 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
414 414  
321 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
415 415  
416 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
417 417  
324 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
418 418  
326 +
419 419  [[image:image-20220616113246-3.png||height="396" width="672"]]
420 420  
421 421  
... ... @@ -424,104 +424,62 @@
424 424  )))
425 425  
426 426  
427 -== 3.4 Network Settings ==
428 428  
429 -=== 3.4.1 Network ~-~-> WiFi ===
336 +== **3.4 Network Settings** ==
430 430  
431 431  
432 -[[image:image-20220616114756-4.png||height="251" width="669"]]
339 +=== **3.4.1 Network ~-~-> WiFi** ===
433 433  
434 434  
435 -=== 3.4.2 Network ~-~-> System Status ===
342 +[[image:image-20220616114756-4.png||height="251" width="669"]]
436 436  
437 437  
438 -[[image:image-20220820134112-2.png||height="539" width="668"]]
439 439  
346 +=== **3.4.2 Network ~-~-> System Status** ===
440 440  
441 -=== 3.4.3 Network ~-~-> Network ===
442 442  
349 +[[image:image-20220820134112-2.png||height="539" width="668"]]
443 443  
444 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
445 445  
446 -[[image:image-20230214093657-2.png||height="333" width="858"]]
447 447  
353 +=== **3.4.3 Network ~-~-> Firewall** ===
448 448  
449 -=== 3.4.4 Network ~-~-> Cellular ===
450 450  
356 +[[image:image-20220616115351-6.png||height="244" width="661"]]
451 451  
452 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
453 453  
454 -(% style="color:red" %)**Note: APN cannot be empty.**
455 455  
456 -[[image:image-20230228115126-1.png]]
360 +== **3.5 System** ==
457 457  
458 458  
459 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
363 +=== **3.5.1  System ~-~-> System Overview** ===
460 460  
461 -[[image:image-20230228115535-2.png||height="478" width="888"]]
462 462  
463 -
464 -== 3.5 System ==
465 -
466 -=== 3.5.1 System ~-~-> System Overview ===
467 -
468 -
469 469  Shows the system info:
470 470  
471 471  [[image:image-20220917144512-5.png||height="618" width="853"]]
472 472  
473 473  
474 -=== 3.5.2 System ~-~-> System General ===
475 475  
372 +=== **3.5.2 System ~-~-> Backup/Restore** ===
476 476  
477 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
478 478  
479 -In addition, Users can customize the FallBack IP address.
480 -
481 -[[image:image-20230214094058-3.png]]
482 -
483 -
484 -=== 3.5.3 System ~-~-> Backup/Restore ===
485 -
486 -
487 487  [[image:image-20220917144725-6.png||height="208" width="869"]]
488 488  
489 489  
490 -=== 3.5.4 System ~-~-> Remoteit ===
491 491  
379 += **4. Build-in Server** =
492 492  
493 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
494 494  
382 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
495 495  
496 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
497 497  
498 -[[image:image-20221230092303-2.png]]
385 +[[image:image-20220820115644-1.png||height="217" width="778"]]
499 499  
500 500  
501 -=== 3.5.5 System ~-~-> Package Management ===
502 -
503 -
504 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
505 -
506 -[[image:image-20230214094316-4.png]]
507 -
508 -
509 -= 4. Build-in Server =
510 -
511 -
512 -Since software version 0603,
513 -
514 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: ChirpStack(% style="color:blue" %)**.**
515 -
516 -[[image:image-20230616175617-8.png||height="390" width="894"]]
517 -
518 -[[image:image-20230616175558-7.png||height="362" width="894"]]
519 -
520 -
521 -
522 522  (% style="color:red" %)**Note:**
523 523  
524 - **Path**: Server ~-~-> Network Server and Server ~-~-> Application Server
390 + **Path**: System ~-~-> Built-in Server
525 525  
526 526  
527 527  **Troubleshooting:**
... ... @@ -529,45 +529,37 @@
529 529  
530 530  **~ 1. URL does not jump properly**
531 531  
532 - For the ChirpStack, you can use the local IP address and the port is 8080 to access it.
398 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
533 533  
534 534   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
535 535  
536 536  
537 -== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
538 538  
404 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
539 539  
540 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
541 541  
407 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
408 +
542 542  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
543 543  
544 544  
545 545  Login account:
546 546  
547 -**Username : ** (% style="background-color:yellow" %)**admin**
414 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
548 548  
549 -**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
416 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
550 550  
551 -[[image:image-20230616175332-6.png||height="519" width="1029"]]
552 552  
419 +[[image:image-20220725171719-1.png||height="570" width="769"]]
553 553  
554 554  
555 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
556 556  
423 +== **4.2 Application Server ~-~- Node-Red** ==
557 557  
558 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
559 559  
560 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
426 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
561 561  
562 -[[image:image-20230321092456-1.png]]
563 563  
564 -
565 -== 4.2 Application Server ~-~- Node-Red ==
566 -
567 -
568 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
569 -
570 -
571 571  Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
572 572  
573 573  
... ... @@ -575,104 +575,15 @@
575 575  
576 576  
577 577  
578 -=== **Using Node-Red, InfluxDB and Grafana** ===
436 += **5. How users can access LPS8v2 using serial USB** =
579 579  
580 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
581 581  
439 +**USB TTL to LPS8v2  Connection:**
582 582  
583 -the users can refer to this link to install them.
441 +Port 1 of the UART on the LPS8v2 is GND
584 584  
585 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
586 -
587 -
588 -=== **Upgrade the node.js** ===
589 -
590 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
591 -
592 -
593 -the users can refer to this link to upgrade them.
594 -
595 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
596 -
597 -
598 -== 4.3 How to disable the built-in server ==
599 -
600 -
601 -Use the following commands to start and stop the TTNv3 service:
602 -
603 603  (% class="box infomessage" %)
604 604  (((
605 -**# start**
606 -systemctl start ttnstack
607 -
608 -**# stop**
609 -systemctl stop ttnstack
610 -
611 -**# enable**
612 -systemctl enable ttnstack
613 -
614 -**#disable**
615 -systemctl disable ttnstack
616 -)))
617 -
618 -Use the following commands to start and stop the Node-Red service:
619 -
620 -(% class="box infomessage" %)
621 -(((
622 -**# start**
623 -systemctl start nodered
624 -
625 -**# stop**
626 -systemctl stop nodered
627 -
628 -**# enable**
629 -systemctl enable nodered
630 -
631 -**#disable**
632 -systemctl disable nodered
633 -)))
634 -
635 -
636 -== 4.4 How to use ChirpStack on LPS8-V2 ==
637 -
638 -
639 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
640 -
641 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
642 -
643 -
644 -=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
645 -
646 -
647 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
648 -
649 -If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
650 -
651 -[[image:image-20230602140406-3.png||height="480" width="918"]]
652 -
653 -
654 -When the configuration is complete, click** "Save&Apply"**.
655 -
656 -
657 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
658 -
659 -[[image:image-20230602143122-4.png||height="511" width="983"]]
660 -
661 -
662 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
663 -
664 -
665 -
666 -= 6. How users can access LPS8-V2 using serial USB =
667 -
668 -
669 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
670 -
671 -
672 -Port 1 of the UART on the LPS8-V2 is GND
673 -
674 -(% class="box infomessage" %)
675 -(((
676 676  **TXD  <~-~--> UART RXD (Gray line)**
677 677  
678 678  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -683,9 +683,10 @@
683 683  
684 684  **LPS8v2 UART connection photo**
685 685  
455 +[[image:image-20220804163015-1.png||height="621" width="466"]]
686 686  
687 -[[image:image-20230421094319-2.png||height="351" width="392"]]
688 688  
458 +
689 689  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
690 690  
691 691  
... ... @@ -695,176 +695,129 @@
695 695  [[image:image-20220804164747-2.png||height="622" width="594"]]
696 696  
697 697  
698 -= 7. OTA System Update =
699 699  
469 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
700 700  
701 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
702 702  
472 +== **Step 1: Configure Frequency Band** ==
703 703  
704 -== 7.1 Auto-update method ==
705 705  
475 +//Each country has a requirement for frequency region. Choose the right one for your area.//
706 706  
707 -The default, each gateway will enable the auto-update function.
477 +[[image:image-20220905164308-1.png]]
708 708  
709 -this function will be triggered every boot and every midnight.
710 710  
711 711  
712 -Users can enable/disable it via Web Page
481 +== **Step 2: Configure the forward address** ==
713 713  
714 -[[image:image-20230607094447-2.png]]
715 715  
484 +**Select one of the servers to configure.**
716 716  
717 -== 7.2 Manual upgrade method ==
486 +**For example:**
718 718  
488 +[[image:image-20220905164847-2.png]]
719 719  
720 -1). Using the Linux command to upgrade the system
721 721  
722 722  
723 -(% class="box infomessage" %)
724 -(((
725 -**apt update && apt install *dragino***
726 -)))
492 +== **Step 3: Download and Install the Helium-gateway-rs** ==
727 727  
728 728  
729 -2). Upgrade the system via the Web page button of "Manual Update"
495 +**Access the gateway CLI via SSH.**
730 730  
497 +[[image:image-20220905165222-3.png]]
731 731  
732 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
733 733  
734 -[[image:image-20230607093849-1.png]]
500 +**Download gateway-rs.**
735 735  
502 +[[image:image-20220905165715-5.png]]
736 736  
737 -= 8. FAQ =
504 +(% class="box infomessage" %)
505 +(((
506 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
507 +)))
738 738  
739 -== 8.1 How to change Hostname ==
740 740  
510 +**Install gateway-rs.**
741 741  
742 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
512 +[[image:image-20220905165917-7.png]]
743 743  
744 744  (% class="box infomessage" %)
745 745  (((
746 -hostnamectl set-hostname dragino-123456
516 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
747 747  )))
748 748  
749 -[[image:image-20230517102429-1.png]]
750 750  
751 -After the configuration is complete, run "reboot" to restart the gateway.
520 +**Modify configuration.**
752 752  
753 753  
754 -== 8.2 Build-in The Things Network migrate to ChirpStack ==
523 +[[image:image-20220905173847-12.png]]
755 755  
756 756  
757 -Migrate guide:
526 +(% class="box infomessage" %)
527 +(((
528 +**region=<Enter regional parameters> \
529 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
530 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
531 +)))
758 758  
759 -**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
760 760  
761 -**2. On the Server ~-~-> Network Server interface, click "Management"**
534 +**Restart the helium_gateway**
762 762  
763 -[[image:image-20230616162454-1.png]]
536 +[[image:image-20220905170920-9.png]]
764 764  
765 765  
766 -**3. Click "Migrate-Chirpstack"**
539 +(% class="box infomessage" %)
540 +(((
541 +**systemctl restart helium_gateway**
542 +)))
767 767  
768 -[[image:image-20230616162742-2.png]]
769 769  
545 +**Check the helium_gateway Log：**
770 770  
771 -**4. Strat Install **
547 +[[image:image-20220905173952-13.png]]
772 772  
773 773  
774 -Click start Install and wait until the migration succeeds
550 +(% class="box infomessage" %)
551 +(((
552 +**journalctl -u helium_gateway -f**
553 +)))
775 775  
776 -[[image:image-20230616162934-3.png]]
777 777  
556 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
778 778  
779 -**5.Migration complete check result**
558 +where the helium gateway log is shown:
780 780  
781 -[[image:image-20230616174526-4.png||height="706" width="983"]]
560 +[[image:image-20220905174534-14.png]]
782 782  
783 783  
784 -[[image:image-20230616180004-9.png]]
563 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
785 785  
786 786  
787 787  
788 -= 9. Trouble Shooting =
567 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**7. Supports**(%%) =
789 789  
790 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
791 791  
792 -
793 -[[image:image-20220920135918-1.png]]
794 -
795 -
796 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
797 -
798 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
799 -
800 -
801 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
802 -
803 -**Click the update URL button to configure the URL with the current eth port address.**
804 -
805 -[[image:image-20220920141936-2.png]]
806 -
807 -
808 -== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
809 -
810 -
811 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
812 -
813 -[[image:image-20230508171607-1.png]]
814 -
815 -
816 -== 9.3  Fallback IP does not work, how can users check ==
817 -
818 -
819 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
820 -
821 -
822 -**1.Check whether the configuration is correct**
823 -
824 -Run the CMD command to ipconfig and ping 172.31.255.254.
825 -
826 -If this fails, the user needs to reconfigure.
827 -
828 -[[image:image-20230413170224-3.png||height="433" width="707"]]
829 -
830 -[[image:image-20230413170246-4.png]]
831 -
832 -
833 -**2. Check whether the firewall is disabled**
834 -
835 -If the firewall is not down, this will affect access to the gateway.
836 -
837 -
838 -== 9.4  Click "Manual_Update", why there is no response? ==
839 -
840 -
841 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
842 -
843 -
844 -[[image:image-20230527090555-3.png||height="660" width="832"]]
845 -
846 -
847 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
848 -
849 -
850 850  (((
851 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
571 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
852 852  )))
853 853  
854 854  (((
855 -With your question as detailed as possible. We will reply and help you in the shortest.
575 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
856 856  
857 857  
858 -= 11. Reference =
859 859  
579 += **8. Reference** =
860 860  
581 +
861 861  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
862 862  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
863 863  
585 +
586 +
864 864  
865 865  )))
866 866  
867 -= 12. Order Info =
590 += **9. Order Info** =
868 868  
869 869  
870 870  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -872,33 +872,26 @@
872 872  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
873 873  
874 874  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
875 -
876 876  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
877 -
878 878  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
879 -
880 880  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
881 -
882 882  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
883 -
884 884  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
885 885  
886 886  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
887 887  
888 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
606 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
607 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
608 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
609 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
889 889  
890 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
891 -
892 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
893 -
894 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
895 -
896 896  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
897 897  
898 898  
899 -= 13. Manufacturer Info =
900 900  
615 += **10. Manufacturer Info** =
901 901  
617 +
902 902  **Shenzhen Dragino Technology Development co. LTD**
903 903  
904 904  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -906,9 +906,10 @@
906 906  LongCheng Street, LongGang District ; Shenzhen 518116,China
907 907  
908 908  
909 -= 14. FCC Warning =
910 910  
626 += **11. FCC Warning** =
911 911  
628 +
912 912  (((
913 913  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
914 914  )))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0