Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 215.1 >
edited by Xiaoye
on 2023/06/07 09:45
To version < 114.1 >
edited by Kilight Cao
on 2022/11/04 15:44
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,19 +57,18 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 69  
70 -== 1.3 Features ==
71 71  
71 +== **1.3 Features** ==
72 72  
73 +
73 73  * Open Source Debian system
74 74  * Managed by Web GUI, SSH via WAN or WiFi
75 75  * Remote Management
... ... @@ -82,84 +82,74 @@
82 82  ** Semtech UDP Packet Forwarder
83 83  ** LoRaWAN Basic Station
84 84  ** ChirpStack-Gateway-Bridge (MQTT)
85 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
86 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
87 87  
88 88  
89 -== 1.4 Block Diagram ==
90 90  
91 +== **1.4 Block Diagram** ==
91 91  
92 92  
93 -== 1.5 LED Indicators ==
94 94  
95 +== **1.5 LED Indicators** ==
95 95  
97 +
96 96  LPS8-V2 has totally four LEDs, They are:
97 97  
98 98  
99 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
101 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
100 100  
101 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
103 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
102 102  
103 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
105 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
104 104  
105 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
107 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
106 106  
107 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
109 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
108 108  
109 - ✓** SOLID RED:** Device doesn't have an Internet connection.
111 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
110 110  
111 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
113 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
112 112  
113 113  
114 -== 1.6 Button Intruction ==
115 115  
117 +== **1.6 Button Intruction** ==
116 116  
119 +
117 117  LPS8-V2 has a black toggle button, which is:
118 118  
119 119  
120 120  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121 121  
122 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
125 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
123 123  
124 124  
125 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
128 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
126 126  
127 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
130 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
128 128  
129 129  
130 -= 2. Quick Start =
131 131  
134 += **2. Quick Start** =
132 132  
136 +
133 133  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 134  
135 135  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 136  
137 137  
138 -== 2.1 Connects to the network and accesses the gateway Web UI ==
139 139  
140 -=== 2.1.1 connect the network ===
143 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
141 141  
142 142  
143 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
146 +== **2.1.1 connect the network.** ==
144 144  
145 145  
146 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
149 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
147 147  
148 -(% style="background-color:yellow" %)**dragino+dragino**
149 149  
150 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
151 -
152 -[[image:image-20230527084515-1.png]]
153 -
154 -[[image:image-20230527085250-2.png||height="495" width="284"]]
155 -
156 -
157 -
158 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
159 -
160 -
161 161  (((
162 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
153 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
163 163  )))
164 164  
165 165  (((
... ... @@ -170,40 +170,9 @@
170 170  
171 171  
172 172  
173 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
164 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
174 174  
175 175  
176 -[[image:image-20230107084650-2.png||height="310" width="839"]]
177 -
178 -
179 -(% style="color:blue" %)**Steps to connect via fallback IP:**
180 -
181 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
182 -
183 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
184 -
185 -
186 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
187 -
188 -
189 -As in the below photo:
190 -
191 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
192 -
193 -
194 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
195 -
196 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
197 -
198 -
199 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
200 -
201 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
202 -
203 -
204 -
205 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
206 -
207 207  [[image:image-20220622100542-2.png||height="369" width="1256"]]
208 208  
209 209  
... ... @@ -223,105 +223,13 @@
223 223  [[image:image-20220622102901-8.png||height="476" width="938"]]
224 224  
225 225  
226 -=== 2.1.2 Access Configure Web UI ===
227 227  
187 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
228 228  
229 -**Web Interface**
230 230  
231 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
190 +=== **2.2.1 Select your area frequency** ===
232 232  
233 233  
234 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
235 -
236 -You will see the login interface of LPS8-V2 as shown below.
237 -
238 -The account details for Web Login are:
239 -
240 -(% style="color:blue" %)**User Name: root**
241 -
242 -(% style="color:blue" %)**Password:   dragino**
243 -
244 -[[image:image-20230106153501-1.png||height="367" width="894"]]
245 -
246 -
247 -== 2.2  Typical Network Setup ==
248 -
249 -=== 2.2.1  Overview ===
250 -
251 -
252 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
253 -
254 -* **WAN Port Internet Mode**
255 -
256 -* **WiFi Client Mode**
257 -
258 -* **Cellular Mode**
259 -
260 -
261 -=== 2.2.2  Use WAN port to access Internet ===
262 -
263 -
264 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
265 -
266 -
267 -[[image:image-20230411100633-2.png||height="501" width="935"]]
268 -
269 -
270 -=== 2.2.3  Access the Internet as a WiFi Client ===
271 -
272 -
273 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
274 -
275 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
276 -
277 -[[image:image-20230411095739-1.png||height="264" width="691"]]
278 -
279 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
280 -
281 -
282 -=== 2.2.4  Use built-in 4G modem for internet access ===
283 -
284 -
285 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
286 -
287 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
288 -
289 -
290 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
291 -
292 -First, install the Micro SIM card as below direction
293 -
294 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
295 -
296 -
297 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
298 -
299 -
300 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
301 -
302 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
303 -
304 -
305 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
306 -
307 -
308 -=== 2.2.5  Check Internet connection ===
309 -
310 -
311 -In the **home** page, we can check the Internet connection.
312 -
313 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
314 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
315 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
316 -
317 -[[image:image-20230411101534-3.png||height="544" width="942"]]
318 -
319 -
320 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
321 -
322 -=== 2.3.1 Select your area frequency ===
323 -
324 -
325 325  (((
326 326  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
327 327  
... ... @@ -331,9 +331,10 @@
331 331  [[image:image-20220622103332-9.png||height="485" width="938"]]
332 332  
333 333  
334 -=== 2.3.2 Get the only gateway EUI ===
335 335  
203 +=== **2.2.2 Get the only gateway EUI** ===
336 336  
205 +
337 337  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
338 338  
339 339  
... ... @@ -355,9 +355,10 @@
355 355  [[image:image-20220622103956-12.png]]
356 356  
357 357  
358 -=== 2.3.3 Register the gateway to The Things Network ===
359 359  
228 +== **2.2.3 Register the gateway to The Things Network** ==
360 360  
230 +
361 361  **Login to The Things Network**
362 362  
363 363  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -371,30 +371,34 @@
371 371  **Get it online**
372 372  
373 373  
374 -= 3. Web Configure Pages =
375 375  
376 -== 3.1 Home ==
245 += **3. Web Configure Pages** =
377 377  
378 378  
379 -Shows the system running status:
248 +== **3.1 Home** ==
380 380  
250 +
251 +//Shows the system running status~://
252 +
381 381  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
382 382  
383 383  
384 -== 3.2 LoRa Settings ==
385 385  
386 -=== 3.2.1 LoRa ~-~-> LoRa ===
257 +== **3.2 LoRa Settings** ==
387 387  
388 388  
389 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
260 +=== **3.2.1 LoRa ~-~-> LoRa** ===
390 390  
391 -Different LPS8v2 hardware versions can support different frequency ranges:
392 392  
393 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
394 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
263 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
395 395  
265 +//Different LPS8v2 hardware versions can support different frequency ranges~://
266 +
267 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
268 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
269 +
396 396  (% class="wikigeneratedid" %)
397 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
271 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
398 398  
399 399  
400 400  (% class="wikigeneratedid" %)
... ... @@ -406,23 +406,26 @@
406 406  )))
407 407  
408 408  
409 -== 3.3 LoRaWAN Settings ==
410 410  
411 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
284 +== **3.3 LoRaWAN Settings** ==
412 412  
413 413  
414 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
287 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
415 415  
416 416  
290 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
291 +
292 +
417 417  [[image:image-20220616111932-2.png||height="516" width="672"]]
418 418  
419 419  
420 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
421 421  
297 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
422 422  
423 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
424 424  
300 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
425 425  
302 +
426 426  [[image:image-20220616113246-3.png||height="396" width="672"]]
427 427  
428 428  
... ... @@ -431,95 +431,57 @@
431 431  )))
432 432  
433 433  
434 -== 3.4 Network Settings ==
435 435  
436 -=== 3.4.1 Network ~-~-> WiFi ===
312 +== **3.4 Network Settings** ==
437 437  
438 438  
439 -[[image:image-20220616114756-4.png||height="251" width="669"]]
315 +=== **3.4.1 Network ~-~-> WiFi** ===
440 440  
441 441  
442 -=== 3.4.2 Network ~-~-> System Status ===
318 +[[image:image-20220616114756-4.png||height="251" width="669"]]
443 443  
444 444  
445 -[[image:image-20220820134112-2.png||height="539" width="668"]]
446 446  
322 +=== **3.4.2 Network ~-~-> System Status** ===
447 447  
448 -=== 3.4.3 Network ~-~-> Network ===
449 449  
325 +[[image:image-20220820134112-2.png||height="539" width="668"]]
450 450  
451 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
452 452  
453 -[[image:image-20230214093657-2.png||height="333" width="858"]]
454 454  
329 +=== **3.4.3 Network ~-~-> Firewall** ===
455 455  
456 -=== 3.4.4 Network ~-~-> Cellular ===
457 457  
332 +[[image:image-20220616115351-6.png||height="244" width="661"]]
458 458  
459 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
460 460  
461 -(% style="color:red" %)**Note: APN cannot be empty.**
462 462  
463 -[[image:image-20230228115126-1.png]]
336 +== **3.5 System** ==
464 464  
465 465  
466 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
339 +=== **3.5.1  System ~-~-> System Overview** ===
467 467  
468 -[[image:image-20230228115535-2.png||height="478" width="888"]]
469 469  
470 -
471 -== 3.5 System ==
472 -
473 -=== 3.5.1 System ~-~-> System Overview ===
474 -
475 -
476 476  Shows the system info:
477 477  
478 478  [[image:image-20220917144512-5.png||height="618" width="853"]]
479 479  
480 480  
481 -=== 3.5.2 System ~-~-> System General ===
482 482  
348 +=== **3.5.2 System ~-~-> Backup/Restore** ===
483 483  
484 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
485 485  
486 -In addition, Users can customize the FallBack IP address.
487 -
488 -[[image:image-20230214094058-3.png]]
489 -
490 -
491 -=== 3.5.3 System ~-~-> Backup/Restore ===
492 -
493 -
494 494  [[image:image-20220917144725-6.png||height="208" width="869"]]
495 495  
496 496  
497 -=== 3.5.4 System ~-~-> Remoteit ===
498 498  
355 += **4. Build-in Server** =
499 499  
500 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
501 501  
502 -
503 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
504 -
505 -[[image:image-20221230092303-2.png]]
506 -
507 -
508 -=== 3.5.5 System ~-~-> Package Management ===
509 -
510 -
511 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
512 -
513 -[[image:image-20230214094316-4.png]]
514 -
515 -
516 -= 4. Build-in Server =
517 -
518 -
519 519  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
520 520  
521 521  
522 -[[image:image-20230214095318-5.png||height="347" width="980"]]
361 +[[image:image-20220820115644-1.png||height="217" width="778"]]
523 523  
524 524  
525 525  (% style="color:red" %)**Note:**
... ... @@ -537,9 +537,10 @@
537 537   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
538 538  
539 539  
540 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
541 541  
380 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
542 542  
382 +
543 543  You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
544 544  
545 545  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
... ... @@ -555,19 +555,10 @@
555 555  [[image:image-20220725171719-1.png||height="570" width="769"]]
556 556  
557 557  
558 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
559 559  
399 +== **4.2 Application Server ~-~- Node-Red** ==
560 560  
561 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
562 562  
563 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
564 -
565 -[[image:image-20230321092456-1.png]]
566 -
567 -
568 -== 4.2 Application Server ~-~- Node-Red ==
569 -
570 -
571 571  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
572 572  
573 573  
... ... @@ -578,104 +578,16 @@
578 578  
579 579  
580 580  
581 -=== **Using Node-Red, InfluxDB and Grafana** ===
412 += **5. How users can access LPS8v2 using serial USB** =
582 582  
583 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
584 584  
415 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
585 585  
586 -the users can refer to this link to install them.
587 587  
588 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
418 +Port 1 of the UART on the LPS8v2 is GND
589 589  
590 -
591 -=== **Upgrade the node.js** ===
592 -
593 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
594 -
595 -
596 -the users can refer to this link to upgrade them.
597 -
598 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
599 -
600 -
601 -== 4.3 How to disable the built-in server ==
602 -
603 -
604 -Use the following commands to start and stop the TTNv3 service:
605 -
606 606  (% class="box infomessage" %)
607 607  (((
608 -**# start**
609 -systemctl start ttnstack
610 -
611 -**# stop**
612 -systemctl stop ttnstack
613 -
614 -**# enable**
615 -systemctl enable ttnstack
616 -
617 -**#disable**
618 -systemctl disable ttnstack
619 -)))
620 -
621 -Use the following commands to start and stop the Node-Red service:
622 -
623 -(% class="box infomessage" %)
624 -(((
625 -**# start**
626 -systemctl start nodered
627 -
628 -**# stop**
629 -systemctl stop nodered
630 -
631 -**# enable**
632 -systemctl enable nodered
633 -
634 -**#disable**
635 -systemctl disable nodered
636 -)))
637 -
638 -
639 -== 4.4 How to use ChirpStack on LPS8-V2 ==
640 -
641 -
642 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
643 -
644 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
645 -
646 -
647 -=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
648 -
649 -
650 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
651 -
652 -If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
653 -
654 -[[image:image-20230602140406-3.png||height="480" width="918"]]
655 -
656 -
657 -When the configuration is complete, click** "Save&Apply"**.
658 -
659 -
660 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
661 -
662 -[[image:image-20230602143122-4.png||height="511" width="983"]]
663 -
664 -
665 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
666 -
667 -
668 -
669 -= 6. How users can access LPS8-V2 using serial USB =
670 -
671 -
672 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
673 -
674 -
675 -Port 1 of the UART on the LPS8-V2 is GND
676 -
677 -(% class="box infomessage" %)
678 -(((
679 679  **TXD  <~-~--> UART RXD (Gray line)**
680 680  
681 681  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -686,9 +686,10 @@
686 686  
687 687  **LPS8v2 UART connection photo**
688 688  
432 +[[image:image-20220804163015-1.png||height="621" width="466"]]
689 689  
690 -[[image:image-20230421094319-2.png||height="351" width="392"]]
691 691  
435 +
692 692  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
693 693  
694 694  
... ... @@ -698,9 +698,10 @@
698 698  [[image:image-20220804164747-2.png||height="622" width="594"]]
699 699  
700 700  
701 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
702 702  
446 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
703 703  
448 +
704 704  == **Step 1: Configure Frequency Band** ==
705 705  
706 706  
... ... @@ -726,72 +726,59 @@
726 726  
727 727  **Access the gateway CLI via SSH.**
728 728  
729 -[[image:image-20230425153417-2.png]]
474 +[[image:image-20220905165222-3.png]]
730 730  
731 731  
732 -**Install the new gateway-rs**
477 +**Download gateway-rs.**
733 733  
479 +[[image:image-20220905165715-5.png]]
480 +
734 734  (% class="box infomessage" %)
735 735  (((
736 -**apt update && apt install helium-gateway**
483 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
737 737  )))
738 738  
739 -[[image:image-20230425154058-4.png]]
740 740  
487 +**Install gateway-rs.**
741 741  
489 +[[image:image-20220905165917-7.png]]
742 742  
743 -Option: If you installed the older gateway-rs, you have clean it
744 -
745 745  (% class="box infomessage" %)
746 746  (((
747 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
493 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
748 748  )))
749 749  
750 -[[image:image-20230425153823-3.png]]
751 751  
497 +**Modify configuration.**
752 752  
753 -**Change the region setting:**
754 754  
500 +[[image:image-20220905173847-12.png]]
755 755  
756 -(% class="box infomessage" %)
757 -(((
758 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
759 759  
760 -
761 -**e.g: **
762 -
763 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
764 -
765 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
766 -)))
767 -
768 -
769 -**Restart the gateway-rs**
770 -
771 771  (% class="box infomessage" %)
772 772  (((
773 -**systemctl restart helium_gateway**
505 +**region=<Enter regional parameters> \
506 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
507 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
774 774  )))
775 775  
776 -[[image:image-20230425155612-7.png||height="265" width="911"]]
777 777  
511 +**Restart the helium_gateway**
778 778  
513 +[[image:image-20220905170920-9.png]]
779 779  
780 -**Check the helium_gateway running status**
781 781  
782 -
783 783  (% class="box infomessage" %)
784 784  (((
785 -**systemctl status helium_gateway**
518 +**systemctl restart helium_gateway**
786 786  )))
787 787  
788 788  
789 -[[image:image-20230425154740-5.png]]
522 +**Check the helium_gateway Log：**
790 790  
524 +[[image:image-20220905173952-13.png]]
791 791  
792 792  
793 -**Check the helium_gateway Log：**
794 -
795 795  (% class="box infomessage" %)
796 796  (((
797 797  **journalctl -u helium_gateway -f**
... ... @@ -798,97 +798,23 @@
798 798  )))
799 799  
800 800  
801 -[[image:image-20230425155659-8.png]]
533 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
802 802  
535 +where the helium gateway log is shown:
803 803  
804 -= 8. OTA System Update =
537 +[[image:image-20220905174534-14.png]]
805 805  
806 806  
807 -LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
540 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
808 808  
809 809  
810 -== 8.1 Auto-update method ==
811 811  
544 += **7. Trouble Shooting** =
812 812  
813 -The default, each gateway will enable the auto-update function.
814 814  
815 -this function will be triggered every boot and every midnight.
547 +== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
816 816  
817 817  
818 -Users can enable/disable it via Web Page
819 -
820 -[[image:image-20230607094447-2.png]]
821 -
822 -
823 -
824 -== 8.2 Manual upgrade method ==
825 -
826 -
827 -1). Using the Linux command to upgrade the system
828 -
829 -
830 -(% class="box infomessage" %)
831 -(((
832 -**apt update && apt install *dragino***
833 -)))
834 -
835 -
836 -2). Upgrade the system via the Web page button of "Manual Update"
837 -
838 -
839 -**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
840 -
841 -[[image:image-20230607093849-1.png]]
842 -
843 -
844 -
845 -
846 -= 9. FAQ =
847 -
848 -== 9.1 How to change Hostname ==
849 -
850 -
851 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
852 -
853 -(% class="box infomessage" %)
854 -(((
855 -hostnamectl set-hostname dragino-123456
856 -)))
857 -
858 -[[image:image-20230517102429-1.png]]
859 -
860 -After the configuration is complete, run "reboot" to restart the gateway.
861 -
862 -
863 -== 9.2 Build-in The Things Network migrate to ChirpStack ==
864 -
865 -
866 -Migrate guide:
867 -
868 -1. Ensure that the gateway is in good network condition, Recommended use of ETH.
869 -
870 -2. Download migrate script and run it.
871 -
872 -(% class="box infomessage" %)
873 -(((
874 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
875 -)))
876 -
877 -[[image:image-20230602135658-1.png||height="545" width="986"]]
878 -
879 -
880 -3. Wait for the script to complete，Enable the Chirpstack on Web UI
881 -
882 -[[image:image-20230602135825-2.png||height="356" width="855"]]
883 -
884 -The default account for chirpstack is: **admin/admin**
885 -
886 -
887 -= 10. Trouble Shooting =
888 -
889 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
890 -
891 -
892 892  [[image:image-20220920135918-1.png]]
893 893  
894 894  
... ... @@ -904,59 +904,23 @@
904 904  [[image:image-20220920141936-2.png]]
905 905  
906 906  
907 -== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
908 908  
909 909  
910 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
567 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
911 911  
912 -[[image:image-20230508171607-1.png]]
913 913  
914 -
915 -== 10.3  Fallback IP does not work, how can users check ==
916 -
917 -
918 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
919 -
920 -
921 -**1.Check whether the configuration is correct**
922 -
923 -Run the CMD command to ipconfig and ping 172.31.255.254.
924 -
925 -If this fails, the user needs to reconfigure.
926 -
927 -[[image:image-20230413170224-3.png||height="433" width="707"]]
928 -
929 -[[image:image-20230413170246-4.png]]
930 -
931 -
932 -**2. Check whether the firewall is disabled**
933 -
934 -If the firewall is not down, this will affect access to the gateway.
935 -
936 -
937 -== 10.4  Click "Manual_Update", why there is no response? ==
938 -
939 -
940 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
941 -
942 -
943 -[[image:image-20230527090555-3.png||height="660" width="832"]]
944 -
945 -
946 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
947 -
948 -
949 949  (((
950 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
571 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
951 951  )))
952 952  
953 953  (((
954 -With your question as detailed as possible. We will reply and help you in the shortest.
575 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
955 955  
956 956  
957 -= 12. Reference =
958 958  
579 += **9. Reference** =
959 959  
581 +
960 960  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
961 961  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
962 962  
... ... @@ -963,7 +963,7 @@
963 963  
964 964  )))
965 965  
966 -= 13. Order Info =
588 += **10. Order Info** =
967 967  
968 968  
969 969  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -987,9 +987,10 @@
987 987  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
988 988  
989 989  
990 -= 14. Manufacturer Info =
991 991  
613 += **10. Manufacturer Info** =
992 992  
615 +
993 993  **Shenzhen Dragino Technology Development co. LTD**
994 994  
995 995  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -997,9 +997,10 @@
997 997  LongCheng Street, LongGang District ; Shenzhen 518116,China
998 998  
999 999  
1000 -= 15. FCC Warning =
1001 1001  
624 += **11. FCC Warning** =
1002 1002  
626 +
1003 1003  (((
1004 1004  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1005 1005  )))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0