Last modified by Xiaoye on 2024/09/21 08:44
<
From version < 214.1 >
edited by Xiaoye
on 2023/06/07 09:44
To version < 184.1 >
edited by Xiaoye
on 2023/04/25 15:40
>
Change comment: Uploaded new attachment "image-20230425154058-4.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -83,8 +83,8 @@
83 83  ** Semtech UDP Packet Forwarder
84 84  ** LoRaWAN Basic Station
85 85  ** ChirpStack-Gateway-Bridge (MQTT)
86 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
88 88  
89 89  
90 90  
... ... @@ -98,19 +98,19 @@
98 98  LPS8-V2 has totally four LEDs, They are:
99 99  
100 100  
101 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
101 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
102 102  
103 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
103 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
104 104  
105 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
105 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
106 106  
107 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
107 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
108 108  
109 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
109 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
110 110  
111 - ✓** SOLID RED:** Device doesn't have an Internet connection.
111 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
113 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
113 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
114 114  
115 115  
116 116  == 1.6 Button Intruction ==
... ... @@ -121,12 +121,12 @@
121 121  
122 122  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123 123  
124 - // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
124 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
125 125  
126 126  
127 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
127 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
128 128  
129 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
129 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
130 130  
131 131  
132 132  = 2. Quick Start =
... ... @@ -142,24 +142,9 @@
142 142  === 2.1.1 connect the network ===
143 143  
144 144  
145 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
145 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
146 146  
147 147  
148 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
149 -
150 -(% style="background-color:yellow" %)**dragino+dragino**
151 -
152 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
153 -
154 -[[image:image-20230527084515-1.png]]
155 -
156 -[[image:image-20230527085250-2.png||height="495" width="284"]]
157 -
158 -
159 -
160 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
161 -
162 -
163 163  (((
164 164  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
165 165  )))
... ... @@ -172,7 +172,7 @@
172 172  
173 173  
174 174  
175 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
160 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
176 176  
177 177  
178 178  [[image:image-20230107084650-2.png||height="310" width="839"]]
... ... @@ -185,7 +185,7 @@
185 185  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
186 186  
187 187  
188 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
173 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
189 189  
190 190  
191 191  As in the below photo:
... ... @@ -195,7 +195,7 @@
195 195  
196 196  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
197 197  
198 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
183 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
199 199  
200 200  
201 201  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -204,7 +204,7 @@
204 204  
205 205  
206 206  
207 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
192 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
208 208  
209 209  [[image:image-20220622100542-2.png||height="369" width="1256"]]
210 210  
... ... @@ -239,9 +239,9 @@
239 239  
240 240  The account details for Web Login are:
241 241  
242 -(% style="color:blue" %)**User Name: root**
227 +(% style="color:#4f81bd" %)**User Name: root**
243 243  
244 -(% style="color:blue" %)**Password:   dragino**
229 +(% style="color:#4f81bd" %)**Password:   dragino**
245 245  
246 246  [[image:image-20230106153501-1.png||height="367" width="894"]]
247 247  
... ... @@ -254,13 +254,9 @@
254 254  LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
255 255  
256 256  * **WAN Port Internet Mode**
257 -
258 258  * **WiFi Client Mode**
259 -
260 260  * **Cellular Mode**
261 261  
262 -
263 -
264 264  === 2.2.2  Use WAN port to access Internet ===
265 265  
266 266  
... ... @@ -310,7 +310,6 @@
310 310  
311 311  === 2.2.5  Check Internet connection ===
312 312  
313 -
314 314  In the **home** page, we can check the Internet connection.
315 315  
316 316  * GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
... ... @@ -379,7 +379,7 @@
379 379  == 3.1 Home ==
380 380  
381 381  
382 -Shows the system running status:
362 +//Shows the system running status~://
383 383  
384 384  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
385 385  
... ... @@ -389,15 +389,15 @@
389 389  === 3.2.1 LoRa ~-~-> LoRa ===
390 390  
391 391  
392 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
372 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
393 393  
394 -Different LPS8v2 hardware versions can support different frequency ranges:
374 +//Different LPS8v2 hardware versions can support different frequency ranges~://
395 395  
396 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
397 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
376 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
377 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
398 398  
399 399  (% class="wikigeneratedid" %)
400 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
380 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
401 401  
402 402  
403 403  (% class="wikigeneratedid" %)
... ... @@ -414,7 +414,7 @@
414 414  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
415 415  
416 416  
417 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
397 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
418 418  
419 419  
420 420  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -423,7 +423,7 @@
423 423  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
424 424  
425 425  
426 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
406 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
427 427  
428 428  
429 429  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -451,7 +451,7 @@
451 451  === 3.4.3 Network ~-~-> Network ===
452 452  
453 453  
454 -In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
434 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
455 455  
456 456  [[image:image-20230214093657-2.png||height="333" width="858"]]
457 457  
... ... @@ -459,7 +459,7 @@
459 459  === 3.4.4 Network ~-~-> Cellular ===
460 460  
461 461  
462 -In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
442 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
463 463  
464 464  (% style="color:red" %)**Note: APN cannot be empty.**
465 465  
... ... @@ -484,7 +484,7 @@
484 484  === 3.5.2 System ~-~-> System General ===
485 485  
486 486  
487 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
467 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
488 488  
489 489  In addition, Users can customize the FallBack IP address.
490 490  
... ... @@ -500,7 +500,7 @@
500 500  === 3.5.4 System ~-~-> Remoteit ===
501 501  
502 502  
503 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
483 +In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
504 504  
505 505  
506 506  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -511,7 +511,7 @@
511 511  === 3.5.5 System ~-~-> Package Management ===
512 512  
513 513  
514 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
494 +In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
515 515  
516 516  [[image:image-20230214094316-4.png]]
517 517  
... ... @@ -642,29 +642,13 @@
642 642  == 4.4 How to use ChirpStack on LPS8-V2 ==
643 643  
644 644  
645 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
625 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
646 646  
647 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
627 +[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
648 648  
629 +[[image:image-20230222094908-1.png||height="133" width="798"]]
649 649  
650 -=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
651 651  
652 -
653 -On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
654 -
655 -If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
656 -
657 -[[image:image-20230602140406-3.png||height="480" width="918"]]
658 -
659 -
660 -When the configuration is complete, click** "Save&Apply"**.
661 -
662 -
663 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
664 -
665 -[[image:image-20230602143122-4.png||height="511" width="983"]]
666 -
667 -
668 668  = 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
669 669  
670 670  
... ... @@ -729,81 +729,75 @@
729 729  
730 730  **Access the gateway CLI via SSH.**
731 731  
732 -[[image:image-20230425153417-2.png]]
696 +[[image:image-20220905165222-3.png]]
733 733  
734 734  
735 -**Install the new gateway-rs**
699 +**Download gateway-rs.**
736 736  
701 +[[image:image-20220905165715-5.png]]
702 +
737 737  (% class="box infomessage" %)
738 738  (((
739 -**apt update && apt install helium-gateway**
705 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
740 740  )))
741 741  
742 -[[image:image-20230425154058-4.png]]
743 743  
709 +**Install gateway-rs.**
744 744  
711 +[[image:image-20220905165917-7.png]]
745 745  
746 -Option: If you installed the older gateway-rs, you have clean it
747 -
748 748  (% class="box infomessage" %)
749 749  (((
750 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
715 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
751 751  )))
752 752  
753 -[[image:image-20230425153823-3.png]]
754 754  
719 +**Modify configuration.**
755 755  
756 -**Change the region setting:**
757 757  
722 +[[image:image-20220905173847-12.png]]
758 758  
724 +
759 759  (% class="box infomessage" %)
760 760  (((
761 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
727 +**region=<Enter regional parameters> \
728 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
729 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
730 +)))
762 762  
763 763  
764 -**e.g: **
733 +**Restart the helium_gateway**
765 765  
766 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
735 +[[image:image-20220905170920-9.png]]
767 767  
768 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
769 -)))
770 770  
771 -
772 -**Restart the gateway-rs**
773 -
774 774  (% class="box infomessage" %)
775 775  (((
776 776  **systemctl restart helium_gateway**
777 777  )))
778 778  
779 -[[image:image-20230425155612-7.png||height="265" width="911"]]
780 780  
744 +**Check the helium_gateway Log：**
781 781  
746 +[[image:image-20220905173952-13.png]]
782 782  
783 -**Check the helium_gateway running status**
784 784  
785 -
786 786  (% class="box infomessage" %)
787 787  (((
788 -**systemctl status helium_gateway**
751 +**journalctl -u helium_gateway -f**
789 789  )))
790 790  
791 791  
792 -[[image:image-20230425154740-5.png]]
755 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
793 793  
757 +where the helium gateway log is shown:
794 794  
759 +[[image:image-20220905174534-14.png]]
795 795  
796 -**Check the helium_gateway Log：**
797 797  
798 -(% class="box infomessage" %)
799 -(((
800 -**journalctl -u helium_gateway -f**
801 -)))
762 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
802 802  
803 803  
804 -[[image:image-20230425155659-8.png]]
805 -
806 -
807 807  = 8. OTA System Update =
808 808  
809 809  
... ... @@ -810,52 +810,11 @@
810 810  LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
811 811  
812 812  
813 -= 9. FAQ =
771 += 9. Trouble Shooting =
814 814  
815 -== 9.1 How to change Hostname ==
773 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
816 816  
817 817  
818 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
819 -
820 -(% class="box infomessage" %)
821 -(((
822 -hostnamectl set-hostname dragino-123456
823 -)))
824 -
825 -[[image:image-20230517102429-1.png]]
826 -
827 -After the configuration is complete, run "reboot" to restart the gateway.
828 -
829 -
830 -== 9.2 Build-in The Things Network migrate to ChirpStack ==
831 -
832 -
833 -Migrate guide:
834 -
835 -1. Ensure that the gateway is in good network condition, Recommended use of ETH.
836 -
837 -2. Download migrate script and run it.
838 -
839 -(% class="box infomessage" %)
840 -(((
841 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
842 -)))
843 -
844 -[[image:image-20230602135658-1.png||height="545" width="986"]]
845 -
846 -
847 -3. Wait for the script to complete，Enable the Chirpstack on Web UI
848 -
849 -[[image:image-20230602135825-2.png||height="356" width="855"]]
850 -
851 -The default account for chirpstack is: **admin/admin**
852 -
853 -
854 -= 10. Trouble Shooting =
855 -
856 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
857 -
858 -
859 859  [[image:image-20220920135918-1.png]]
860 860  
861 861  
... ... @@ -871,17 +871,9 @@
871 871  [[image:image-20220920141936-2.png]]
872 872  
873 873  
874 -== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
791 +== 9.2  Fallback IP does not work, how can users check ==
875 875  
876 876  
877 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
878 -
879 -[[image:image-20230508171607-1.png]]
880 -
881 -
882 -== 10.3  Fallback IP does not work, how can users check ==
883 -
884 -
885 885  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
886 886  
887 887  
... ... @@ -901,37 +901,27 @@
901 901  If the firewall is not down, this will affect access to the gateway.
902 902  
903 903  
904 -== 10.4  Click "Manual_Update", why there is no response? ==
813 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
905 905  
906 906  
907 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
908 -
909 -
910 -[[image:image-20230527090555-3.png||height="660" width="832"]]
911 -
912 -
913 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
914 -
915 -
916 916  (((
917 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
817 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
918 918  )))
919 919  
920 920  (((
921 -With your question as detailed as possible. We will reply and help you in the shortest.
821 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
922 922  
923 923  
924 -= 12. Reference =
824 += 11. Reference =
925 925  
926 926  
927 927  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
928 928  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
929 929  
930 -
931 931  
932 932  )))
933 933  
934 -= 13. Order Info =
833 += 12. Order Info =
935 935  
936 936  
937 937  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -955,7 +955,7 @@
955 955  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
956 956  
957 957  
958 -= 14. Manufacturer Info =
857 += 13. Manufacturer Info =
959 959  
960 960  
961 961  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -965,7 +965,7 @@
965 965  LongCheng Street, LongGang District ; Shenzhen 518116,China
966 966  
967 967  
968 -= 15. FCC Warning =
867 += 14. FCC Warning =
969 969  
970 970  
971 971  (((
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0