Changes for page LPS8v2 -- LoRaWAN Indoor Gateway User Manual

Last modified by Xiaoye on 2024/09/21 08:44

From version < 212.1 >

edited by Kilight Cao
on 2023/06/05 09:57

To version < 164.1 >

edited by Kilight Cao
on 2023/04/11 10:15

Change comment: Uploaded new attachment "image-20230411101534-3.png", version {1}

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 31 removed)

Details

Page properties

Content

@@ -23,15 +23,15 @@
  (((
  (((
--The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
++The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
  )))
  (((
--The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
++The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
  )))
  (((
--LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
++LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
  )))
  (((
@@ -39,7 +39,7 @@
  )))
  (((
--LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
++LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
  )))
@@ -66,6 +66,8 @@
  * Storage Temperature: -20 ~~ 70°C
  * Power Input: 5V, 2A, DC
++
++
  == 1.3 Features ==
@@ -81,9 +81,11 @@
  ** Semtech UDP Packet Forwarder
  ** LoRaWAN Basic Station
  ** ChirpStack-Gateway-Bridge (MQTT)
--* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
--* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
++* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
++* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
++
++
  == 1.4 Block Diagram ==
@@ -94,19 +94,19 @@
  LPS8-V2 has totally four LEDs, They are:
--(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
++(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
--(% style="color:blue" %)**➢ ETH LED**(%%):   This RGB LED will blink GREEN when the ETH port is connecting
++(% style="color:blue" %)//**➢ ETH LED**//(%%)//:   This RGB LED will blink GREEN when the ETH port is connecting//
--(% style="color:blue" %)**➢ SYS LED**(%%):   This RGB LED will show different colors in different states:
++(% style="color:blue" %)//**➢ SYS LED**//(%%)//:   This RGB LED will show different colors in different states~://
--                     ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
++//                     ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
--                     ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
++//                     ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
--                     ✓** SOLID RED:** Device doesn't have an Internet connection.
++//                     ✓** SOLID RED:** Device doesn't have an Internet connection.//
--(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
++(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
  == 1.6 Button Intruction ==
@@ -135,27 +135,12 @@
  == 2.1 Connects to the network and accesses the gateway Web UI ==
--=== 2.1.1 connect the network ===
++== 2.1.1 connect the network ==
--==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
++=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
--Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
--
--   (% style="background-color:yellow" %)**dragino+dragino**
--
--User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
--
--[[image:image-20230527084515-1.png]]
--
--[[image:image-20230527085250-2.png||height="495" width="284"]]
--
--
--
--==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
--
--
  (((
  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
  )))
@@ -167,10 +167,9 @@
  [[image:image-20220622100129-1.png||height="332" width="1263"]]
++=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
--==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
--
  [[image:image-20230107084650-2.png||height="310" width="839"]]
@@ -180,28 +180,20 @@
 . Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
--
--Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
--
--
  As in the below photo:
--[[image:image-20230413172038-1.png||height="732" width="1243"]]
++[[image:image-20230107085904-4.png||height="443" width="361"]]
--
--Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
--
--If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
--
--
 . In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
++
  [[image:image-20230111094247-2.png||height="619" width="1250"]]
--==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
++=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
++
  [[image:image-20220622100542-2.png||height="369" width="1256"]]
@@ -221,7 +221,7 @@
  [[image:image-20220622102901-8.png||height="476" width="938"]]
--=== 2.1.2 Access Configure Web UI ===
++== 2.1.2 Access Configure Web UI ==
  **Web Interface**
@@ -235,89 +235,18 @@
  The account details for Web Login are:
--(% style="color:blue" %)**User Name: root**
++(% style="color:#4f81bd" %)**User Name: root**
--(% style="color:blue" %)**Password:   dragino**
++(% style="color:#4f81bd" %)**Password:   dragino**
  [[image:image-20230106153501-1.png||height="367" width="894"]]
--== 2.2  Typical Network Setup ==
++== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
--=== 2.2.1  Overview ===
++=== 2.2.1 Select your area frequency ===
--LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
--
--* **WAN Port Internet Mode**
--
--* **WiFi Client Mode**
--
--* **Cellular Mode**
--
--=== 2.2.2  Use WAN port to access Internet ===
--
--
--By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
--
--
--[[image:image-20230411100633-2.png||height="501" width="935"]]
--
--
--=== 2.2.3  Access the Internet as a WiFi Client ===
--
--
--In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
--
--The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~->  Wi-Fi**
--
--[[image:image-20230411095739-1.png||height="264" width="691"]]
--
--In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
--
--
--=== 2.2.4  Use built-in 4G modem for internet access ===
--
--
--(% style="color:blue" %)**Since Hardware version HP0C 1.4**
--
--Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
--
--
--If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
--
--First, install the Micro SIM card as below direction
--
--Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
--
--
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
--
--
--The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
--
--While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
--
--
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
--
--
--=== 2.2.5  Check Internet connection ===
--
--In the **home** page, we can check the Internet connection.
--
--* GREEN Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]]  : This interface has Internet connection.
--* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
--* RED Cross    [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
--
--[[image:image-20230411101534-3.png||height="544" width="942"]]
--
--
--== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
--
--=== 2.3.1 Select your area frequency ===
--
--
  (((
  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
@@ -327,7 +327,7 @@
  [[image:image-20220622103332-9.png||height="485" width="938"]]
--=== 2.3.2 Get the only gateway EUI ===
++=== 2.2.2 Get the only gateway EUI ===
  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
@@ -351,7 +351,7 @@
  [[image:image-20220622103956-12.png]]
--=== 2.3.3 Register the gateway to The Things Network ===
++=== 2.2.3 Register the gateway to The Things Network ===
  **Login to The Things Network**
@@ -372,7 +372,7 @@
  == 3.1 Home ==
--Shows the system running status:
++//Shows the system running status~://
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
@@ -382,15 +382,15 @@
  === 3.2.1 LoRa ~-~-> LoRa ===
--This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
++//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
--Different LPS8v2 hardware versions can support different frequency ranges:
++//Different LPS8v2 hardware versions can support different frequency ranges~://
--* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
--* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
++* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
++* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
  (% class="wikigeneratedid" %)
--After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
++//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
  (% class="wikigeneratedid" %)
@@ -407,7 +407,7 @@
  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
--This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
++//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
  [[image:image-20220616111932-2.png||height="516" width="672"]]
@@ -416,7 +416,7 @@
  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
--This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
++//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
  [[image:image-20220616113246-3.png||height="396" width="672"]]
@@ -493,7 +493,7 @@
  === 3.5.4 System ~-~-> Remoteit ===
--In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
++In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
@@ -504,7 +504,7 @@
  === 3.5.5 System ~-~-> Package Management ===
--In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
++In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
  [[image:image-20230214094316-4.png]]
@@ -556,7 +556,7 @@
  Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
--The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
++The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
  [[image:image-20230321092456-1.png]]
@@ -635,27 +635,13 @@
  == 4.4 How to use ChirpStack on LPS8-V2 ==
--By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
++By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
--**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
++[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
++[[image:image-20230222094908-1.png||height="133" width="798"]]
--=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
--
--On the Server ~-~-> Network Server interface, choose the frequency Plan first.
--
--If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
--
--[[image:image-20230602140406-3.png||height="480" width="918"]]
--
--
--When the configuration is complete, click "Save&Apply".
--
--(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
--
--[[image:image-20230602143122-4.png||height="511" width="983"]]
--
  = 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
@@ -680,8 +680,8 @@
  **LPS8v2 UART connection photo**
++[[image:image-20220804163015-1.png||height="621" width="466"]]
--[[image:image-20230421094319-2.png||height="351" width="392"]]
  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
@@ -720,81 +720,75 @@
  **Access the gateway CLI via SSH.**
--[[image:image-20230425153417-2.png]]
++[[image:image-20220905165222-3.png]]
--**Install the new gateway-rs**
++**Download gateway-rs.**
++[[image:image-20220905165715-5.png]]
++
  (% class="box infomessage" %)
  (((
--**apt update && apt install helium-gateway**
++**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
  )))
--[[image:image-20230425154058-4.png]]
++**Install gateway-rs.**
++[[image:image-20220905165917-7.png]]
--Option: If you installed the older gateway-rs, you have clean it
--
  (% class="box infomessage" %)
  (((
--**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
++**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
  )))
--[[image:image-20230425153823-3.png]]
++**Modify configuration.**
--**Change the region setting:**
++[[image:image-20220905173847-12.png]]
++
  (% class="box infomessage" %)
  (((
--**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
++**region=<Enter regional parameters> \
++&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
++&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
++)))
--**e.g: **
++**Restart the helium_gateway**
--**US915    ~-~-->    sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
++[[image:image-20220905170920-9.png]]
--**EU868    ~-~-->    sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
--)))
--
--**Restart the gateway-rs**
--
  (% class="box infomessage" %)
  (((
  **systemctl restart helium_gateway**
  )))
--[[image:image-20230425155612-7.png||height="265" width="911"]]
++**Check the helium_gateway Log：**
++[[image:image-20220905173952-13.png]]
--**Check the helium_gateway running status**
--
  (% class="box infomessage" %)
  (((
--**systemctl status helium_gateway**
++**journalctl -u helium_gateway -f**
  )))
--[[image:image-20230425154740-5.png]]
++(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
++where the helium gateway log is shown:
++[[image:image-20220905174534-14.png]]
--**Check the helium_gateway Log：**
--(% class="box infomessage" %)
--(((
--**journalctl -u helium_gateway -f**
--)))
++So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
--[[image:image-20230425155659-8.png]]
--
--
  = 8. OTA System Update =
@@ -801,51 +801,11 @@
  LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
--= 9. FAQ =
++= 9. Trouble Shooting =
--== 9.1 How to change Hostname ==
++== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
--By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
--
--(% class="box infomessage" %)
--(((
--hostnamectl set-hostname dragino-123456
--)))
--
--[[image:image-20230517102429-1.png]]
--
--After the configuration is complete, run "reboot" to restart the gateway.
--
--
--== 9.2 Build-in The Things Network migrate to ChirpStack ==
--
--
--Migrate guide:
--
--1. Ensure that the gateway is in good network condition, Recommended use of ETH.
--
--2. Download migrate script and run it.
--
--(% class="box infomessage" %)
--(((
--wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
--)))
--
--[[image:image-20230602135658-1.png||height="545" width="986"]]
--
--3. Wait for the script to complete，Enable the Chirpstack on Web UI
--
--[[image:image-20230602135825-2.png||height="356" width="855"]]
--
--The default account for chirpstack is: **admin/admin**
--
--
--= 10. Trouble Shooting =
--
--== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
--
--
  [[image:image-20220920135918-1.png]]
@@ -861,57 +861,18 @@
  [[image:image-20220920141936-2.png]]
--== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
++= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
--When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
--
--[[image:image-20230508171607-1.png]]
--
--
--== 10.3  Fallback IP does not work, how can users check ==
--
--
--When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
--
--
--**1.Check whether the configuration is correct**
--
--Run the CMD command to ipconfig and ping 172.31.255.254.
--
--If this fails, the user needs to reconfigure.
--
--[[image:image-20230413170224-3.png||height="433" width="707"]]
--
--[[image:image-20230413170246-4.png]]
--
--
--**2. Check whether the firewall is disabled**
--
--If the firewall is not down, this will affect access to the gateway.
--
--
--== 10.4  Click "Manual_Update", why there is no response? ==
--
--
--When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
--
--
--[[image:image-20230527090555-3.png||height="660" width="832"]]
--
--
--= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
--
--
  (((
--If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
++**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
  )))
  (((
--With your question as detailed as possible. We will reply and help you in the shortest.
++**//With your question as detailed as possible. We will reply and help you in the shortest.//**
--= 12. Reference =
++= 11. Reference =
  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
@@ -920,7 +920,7 @@
  )))
--= 13. Order Info =
++= 12. Order Info =
  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
@@ -944,7 +944,7 @@
  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
--= 14. Manufacturer Info =
++= 13. Manufacturer Info =
  **Shenzhen Dragino Technology Development co. LTD**
@@ -954,7 +954,7 @@
  LongCheng Street, LongGang District ; Shenzhen 518116,China
--= 15. FCC Warning =
++= 14. FCC Warning =
  (((

fallback ip.mp4

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-5.1 MB

Content

image-20230413162911-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-21.2 KB

Content

image-20230413170050-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-17.5 KB

Content

image-20230413170224-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-15.1 KB

Content

image-20230413170246-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-10.1 KB

Content

image-20230413172038-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-119.5 KB

Content

image-20230421094259-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-461.1 KB

Content

image-20230421094319-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-337.6 KB

Content

image-20230425153403-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoye

Size

...	...	@@ -1,1 +1,0 @@
1		-14.5 KB

Content

image-20230425153417-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoye

Size

...	...	@@ -1,1 +1,0 @@
1		-14.9 KB

Content

image-20230425153823-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoye

Size

...	...	@@ -1,1 +1,0 @@
1		-35.5 KB

Content

image-20230425154058-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoye

Size

...	...	@@ -1,1 +1,0 @@
1		-50.6 KB

Content

image-20230425154740-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoye

Size

...	...	@@ -1,1 +1,0 @@
1		-62.9 KB

Content

image-20230425155300-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoye

Size

...	...	@@ -1,1 +1,0 @@
1		-19.7 KB

Content

image-20230425155612-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoye

Size

...	...	@@ -1,1 +1,0 @@
1		-19.6 KB

Content

image-20230425155659-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoye

Size

...	...	@@ -1,1 +1,0 @@
1		-34.8 KB

Content

image-20230508171607-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-37.5 KB

Content

image-20230517102429-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-25.5 KB

Content

image-20230524183659-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-55.9 KB

Content

image-20230526103829-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-55.7 KB

Content

image-20230526104156-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-33.0 KB

Content

image-20230526104501-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-125.6 KB

Content

image-20230526113915-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-55.8 KB

Content

image-20230526115650-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-124.0 KB

Content

image-20230527084515-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-56.0 KB

Content

image-20230527085250-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-144.5 KB

Content

image-20230527090555-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-52.9 KB

Content

image-20230602135658-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-86.5 KB

Content

image-20230602135825-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-37.4 KB

Content

image-20230602140406-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-53.0 KB

Content

image-20230602143122-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-82.6 KB

Content

Changes for page LPS8v2 -- LoRaWAN Indoor Gateway User Manual

Summary

Details

Applications

Navigation