Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 211.1 >
edited by Kilight Cao
on 2023/06/02 14:32
To version < 79.1 >
edited by Kilight Cao
on 2022/08/04 16:55
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -13,25 +13,22 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
27 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
31 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
39 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,16 +57,14 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
61 +* Work Temperature: -20 ~~ 65°C
62 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
65 +== **1.3 Features** ==
70 70  
71 71  
72 72  * Open Source Debian system
... ... @@ -81,85 +81,55 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
80 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
81 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 Block Diagram ==
83 +== **1.4 Block Diagram** ==
88 88  
89 89  
90 90  
91 -== 1.5 LED Indicators ==
87 +== **1.5 LED Indicators** ==
92 92  
93 93  
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
97 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
93 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
98 98  
99 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
95 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
100 100  
101 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
97 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
102 102  
103 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
104 104  
105 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
106 106  
107 - ✓** SOLID RED:** Device doesn't have an Internet connection.
103 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
108 108  
109 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
105 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
110 110  
111 111  
112 -== 1.6 Button Intruction ==
113 113  
109 += **2. Quick Start** =
114 114  
115 -LPS8-V2 has a black toggle button, which is:
116 116  
117 -
118 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119 -
120 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
121 -
122 -
123 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
124 -
125 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 -
127 -
128 -= 2. Quick Start =
129 -
130 -
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
137 137  
138 -=== 2.1.1 connect the network ===
118 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
139 139  
140 140  
141 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
121 +== **2.1.1 connect the network.** ==
142 142  
143 143  
144 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
124 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
145 145  
146 - (% style="background-color:yellow" %)**dragino+dragino**
147 147  
148 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 -
150 -[[image:image-20230527084515-1.png]]
151 -
152 -[[image:image-20230527085250-2.png||height="495" width="284"]]
153 -
154 -
155 -If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
156 -
157 -
158 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
159 -
160 -
161 161  (((
162 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
128 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
163 163  )))
164 164  
165 165  (((
... ... @@ -170,43 +170,33 @@
170 170  
171 171  
172 172  
173 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
139 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
174 174  
175 175  
176 -[[image:image-20230107084650-2.png||height="310" width="839"]]
142 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
177 177  
178 178  
179 -(% style="color:blue" %)**Steps to connect via fallback IP:**
145 +(((
146 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
147 +)))
180 180  
181 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
182 182  
183 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
184 184  
151 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
185 185  
186 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
153 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
187 187  
155 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
188 188  
189 -As in the below photo:
157 +[[image:image-20220622101433-4.png]]
190 190  
191 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
192 192  
160 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
193 193  
194 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
195 195  
196 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
163 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
197 197  
198 198  
199 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
200 -
201 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
202 -
203 -
204 -
205 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
206 -
207 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
208 -
209 -
210 210  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
211 211  
212 212  
... ... @@ -220,124 +220,32 @@
220 220  [[image:image-20220622102847-7.png]]
221 221  
222 222  
223 -[[image:image-20220622102901-8.png||height="476" width="938"]]
179 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
224 224  
225 225  
226 -=== 2.1.2 Access Configure Web UI ===
227 227  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
228 228  
229 -**Web Interface**
230 230  
231 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
232 232  
233 233  
234 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
235 -
236 -You will see the login interface of LPS8-V2 as shown below.
237 -
238 -The account details for Web Login are:
239 -
240 -(% style="color:blue" %)**User Name: root**
241 -
242 -(% style="color:blue" %)**Password:   dragino**
243 -
244 -[[image:image-20230106153501-1.png||height="367" width="894"]]
245 -
246 -
247 -== 2.2  Typical Network Setup ==
248 -
249 -=== 2.2.1  Overview ===
250 -
251 -
252 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
253 -
254 -* **WAN Port Internet Mode**
255 -
256 -* **WiFi Client Mode**
257 -
258 -* **Cellular Mode**
259 -
260 -=== 2.2.2  Use WAN port to access Internet ===
261 -
262 -
263 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
264 -
265 -
266 -[[image:image-20230411100633-2.png||height="501" width="935"]]
267 -
268 -
269 -=== 2.2.3  Access the Internet as a WiFi Client ===
270 -
271 -
272 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
273 -
274 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
275 -
276 -[[image:image-20230411095739-1.png||height="264" width="691"]]
277 -
278 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
279 -
280 -
281 -=== 2.2.4  Use built-in 4G modem for internet access ===
282 -
283 -
284 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
285 -
286 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
287 -
288 -
289 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
290 -
291 -First, install the Micro SIM card as below direction
292 -
293 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
294 -
295 -
296 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
297 -
298 -
299 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
300 -
301 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
302 -
303 -
304 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
305 -
306 -
307 -=== 2.2.5  Check Internet connection ===
308 -
309 -In the **home** page, we can check the Internet connection.
310 -
311 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
312 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
313 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
314 -
315 -[[image:image-20230411101534-3.png||height="544" width="942"]]
316 -
317 -
318 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
319 -
320 -=== 2.3.1 Select your area frequency ===
321 -
322 -
323 323  (((
324 324  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
325 -
326 -
327 327  )))
328 328  
329 -[[image:image-20220622103332-9.png||height="485" width="938"]]
193 +[[image:image-20220622103332-9.png]]
330 330  
331 331  
332 -=== 2.3.2 Get the only gateway EUI ===
333 333  
197 +=== **2.2.2 Get the only gateway EUI** ===
334 334  
199 +
335 335  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
336 336  
202 +[[image:image-20220622103355-10.png]]
337 337  
338 -[[image:image-20220622103355-10.png||height="698" width="949"]]
339 339  
340 -
341 341  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
342 342  
343 343  
... ... @@ -353,9 +353,10 @@
353 353  [[image:image-20220622103956-12.png]]
354 354  
355 355  
356 -=== 2.3.3 Register the gateway to The Things Network ===
357 357  
221 +== 2.2.3 Register the gateway to The Things Network ==
358 358  
223 +
359 359  **Login to The Things Network**
360 360  
361 361  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -369,177 +369,117 @@
369 369  **Get it online**
370 370  
371 371  
372 -= 3. Web Configure Pages =
373 373  
374 -== 3.1 Home ==
238 += **3. Web Configure Pages** =
375 375  
376 376  
377 -Shows the system running status:
241 +== **3.1 Home** ==
378 378  
379 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
380 380  
244 +//Shows the system running status~://
381 381  
382 -== 3.2 LoRa Settings ==
383 383  
384 -=== 3.2.1 LoRa ~-~-> LoRa ===
247 +== **3.2 LoRa Settings** ==
385 385  
386 386  
387 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
250 +=== **3.2.1 LoRa ~-~-> LoRa** ===
388 388  
389 -Different LPS8v2 hardware versions can support different frequency ranges:
390 390  
391 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
392 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
253 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
393 393  
394 -(% class="wikigeneratedid" %)
395 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
255 +//Different LPS8v2 hardware versions can support different frequency ranges~://
396 396  
257 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
258 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
397 397  
398 398  (% class="wikigeneratedid" %)
261 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
262 +
263 +(% class="wikigeneratedid" %)
399 399  [[image:image-20220616110739-1.png||height="372" width="682"]]
400 400  
401 401  
402 402  (((
403 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
268 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
404 404  )))
405 405  
406 406  
407 -== 3.3 LoRaWAN Settings ==
408 408  
409 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
273 +== **3.3 LoRaWAN Settings** ==
410 410  
411 411  
412 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
276 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
413 413  
414 414  
279 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
280 +
415 415  [[image:image-20220616111932-2.png||height="516" width="672"]]
416 416  
417 417  
418 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
419 419  
285 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
420 420  
421 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
422 422  
288 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
423 423  
424 424  [[image:image-20220616113246-3.png||height="396" width="672"]]
425 425  
426 426  
427 427  (((
428 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
294 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
429 429  )))
430 430  
431 431  
432 -== 3.4 Network Settings ==
433 433  
434 -=== 3.4.1 Network ~-~-> WiFi ===
299 +== **3.4 Network Settings** ==
435 435  
436 436  
437 -[[image:image-20220616114756-4.png||height="251" width="669"]]
302 +=== **3.4.1 Network ~-~-> WiFi** ===
438 438  
439 439  
440 -=== 3.4.2 Network ~-~-> System Status ===
305 +[[image:image-20220616114756-4.png||height="251" width="669"]]
441 441  
442 442  
443 -[[image:image-20220820134112-2.png||height="539" width="668"]]
444 444  
309 +=== **3.4.2 Network ~-~-> System Status** ===
445 445  
446 -=== 3.4.3 Network ~-~-> Network ===
447 447  
312 +[[image:image-20220616115229-5.png||height="548" width="665"]]
448 448  
449 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
450 450  
451 -[[image:image-20230214093657-2.png||height="333" width="858"]]
452 452  
316 +=== **3.4.3 Network ~-~-> Firewall** ===
453 453  
454 -=== 3.4.4 Network ~-~-> Cellular ===
455 455  
319 +[[image:image-20220616115351-6.png||height="244" width="661"]]
456 456  
457 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
458 458  
459 -(% style="color:red" %)**Note: APN cannot be empty.**
460 460  
461 -[[image:image-20230228115126-1.png]]
323 +== **3.5 System** ==
462 462  
463 463  
464 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
326 +=== **3.5.1  System ~-~-> System Overview** ===
465 465  
466 -[[image:image-20230228115535-2.png||height="478" width="888"]]
467 467  
468 -
469 -== 3.5 System ==
470 -
471 -=== 3.5.1 System ~-~-> System Overview ===
472 -
473 -
474 474  Shows the system info:
475 475  
476 -[[image:image-20220917144512-5.png||height="618" width="853"]]
477 477  
478 478  
479 -=== 3.5.2 System ~-~-> System General ===
333 +=== **3.5.2 System ~-~-> Backup/Restore** ===
480 480  
481 481  
482 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
336 +[[image:image-20220616115808-7.png||height="194" width="649"]]
483 483  
484 -In addition, Users can customize the FallBack IP address.
485 485  
486 -[[image:image-20230214094058-3.png]]
487 487  
340 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
488 488  
489 -=== 3.5.3 System ~-~-> Backup/Restore ===
490 490  
343 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
491 491  
492 -[[image:image-20220917144725-6.png||height="208" width="869"]]
345 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
493 493  
494 494  
495 -=== 3.5.4 System ~-~-> Remoteit ===
496 -
497 -
498 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
499 -
500 -
501 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
502 -
503 -[[image:image-20221230092303-2.png]]
504 -
505 -
506 -=== 3.5.5 System ~-~-> Package Management ===
507 -
508 -
509 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
510 -
511 -[[image:image-20230214094316-4.png]]
512 -
513 -
514 -= 4. Build-in Server =
515 -
516 -
517 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
518 -
519 -
520 -[[image:image-20230214095318-5.png||height="347" width="980"]]
521 -
522 -
523 -(% style="color:red" %)**Note:**
524 -
525 - **Path**: System ~-~-> Built-in Server
526 -
527 -
528 -**Troubleshooting:**
529 -
530 -
531 -**~ 1. URL does not jump properly**
532 -
533 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
534 -
535 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
536 -
537 -
538 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
539 -
540 -
541 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
542 -
543 543  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
544 544  
545 545  
... ... @@ -553,376 +553,104 @@
553 553  [[image:image-20220725171719-1.png||height="570" width="769"]]
554 554  
555 555  
556 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
557 -
558 -
559 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
560 -
561 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
562 -
563 -[[image:image-20230321092456-1.png]]
564 -
565 -
566 -== 4.2 Application Server ~-~- Node-Red ==
567 -
568 -
569 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
570 -
571 -
572 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
573 -
574 -
575 -[[image:image-20220725172124-3.png||height="610" width="843"]]
576 -
577 -
578 -
579 -=== **Using Node-Red, InfluxDB and Grafana** ===
580 -
581 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
582 -
583 -
584 -the users can refer to this link to install them.
585 -
586 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
587 -
588 -
589 -=== **Upgrade the node.js** ===
590 -
591 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
592 -
593 -
594 -the users can refer to this link to upgrade them.
595 -
596 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
597 -
598 -
599 -== 4.3 How to disable the built-in server ==
600 -
601 -
602 -Use the following commands to start and stop the TTNv3 service:
603 -
604 -(% class="box infomessage" %)
605 605  (((
606 -**# start**
607 -systemctl start ttnstack
608 -
609 -**# stop**
610 -systemctl stop ttnstack
611 -
612 -**# enable**
613 -systemctl enable ttnstack
614 -
615 -**#disable**
616 -systemctl disable ttnstack
362 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with the TTN-Stack
363 + You can complete the installation manually with the following command.**
617 617  )))
618 618  
619 -Use the following commands to start and stop the Node-Red service:
620 620  
621 621  (% class="box infomessage" %)
622 622  (((
623 -**# start**
624 -systemctl start nodered
625 -
626 -**# stop**
627 -systemctl stop nodered
628 -
629 -**# enable**
630 -systemctl enable nodered
631 -
632 -**#disable**
633 -systemctl disable nodered
634 -)))
635 -
636 -
637 -== 4.4 How to use ChirpStack on LPS8-V2 ==
638 -
639 -
640 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
641 -
642 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
643 -
644 -
645 -=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
646 -
647 -
648 -On the Server ~-~-> Network Server interface, choose the frequency Plan first.
649 -
650 -If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
651 -
652 -[[image:image-20230602140406-3.png||height="480" width="918"]]
653 -
654 -
655 -When the configuration is complete, click "Save&Apply".
656 -
657 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
658 -
659 -[[image:image-20230602143122-4.png||height="511" width="983"]]
660 -
661 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
662 -
663 -
664 -
665 -= 6. How users can access LPS8-V2 using serial USB =
666 -
667 -
668 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
669 -
670 -
671 -Port 1 of the UART on the LPS8-V2 is GND
672 -
673 -(% class="box infomessage" %)
674 674  (((
675 -**TXD  <~-~--> UART RXD (Gray line)**
676 -
677 -**RXD  <~-~--> UART TXD (White line)**
678 -
679 -**GND <~-~--> GND (Black line)**
370 +(% style="background-color:#fcf8e3" %)cd /tmp && wget [[http:~~/~~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh>>http://repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh]]
371 +chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
680 680  )))
373 +)))
681 681  
682 682  
683 -**LPS8v2 UART connection photo**
684 684  
377 += **5. Build-in Application Server ~-~- Node-Red** =
685 685  
686 -[[image:image-20230421094319-2.png||height="351" width="392"]]
687 687  
688 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
380 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
689 689  
382 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
690 690  
691 -[[image:image-20220804164928-3.png||height="320" width="332"]]
692 692  
385 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
693 693  
694 -[[image:image-20220804164747-2.png||height="622" width="594"]]
695 695  
388 +[[image:image-20220725172124-3.png||height="610" width="843"]]
696 696  
697 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
698 698  
699 -
700 -== **Step 1: Configure Frequency Band** ==
701 -
702 -
703 -//Each country has a requirement for frequency region. Choose the right one for your area.//
704 -
705 -[[image:image-20220905164308-1.png]]
706 -
707 -
708 -
709 -== **Step 2: Configure the forward address** ==
710 -
711 -
712 -**Select one of the servers to configure.**
713 -
714 -**For example:**
715 -
716 -[[image:image-20220905164847-2.png]]
717 -
718 -
719 -
720 -== **Step 3: Download and Install the Helium-gateway-rs** ==
721 -
722 -
723 -**Access the gateway CLI via SSH.**
724 -
725 -[[image:image-20230425153417-2.png]]
726 -
727 -
728 -**Install the new gateway-rs**
729 -
730 -(% class="box infomessage" %)
731 731  (((
732 -**apt update && apt install helium-gateway**
392 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
393 + You can complete the installation manually with the following command.**
733 733  )))
734 734  
735 -[[image:image-20230425154058-4.png]]
736 736  
737 737  
738 -
739 -Option: If you installed the older gateway-rs, you have clean it
740 -
741 741  (% class="box infomessage" %)
742 742  (((
743 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
744 -)))
745 -
746 -[[image:image-20230425153823-3.png]]
747 -
748 -
749 -**Change the region setting:**
750 -
751 -
752 -(% class="box infomessage" %)
753 753  (((
754 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
755 -
756 -
757 -**e.g: **
758 -
759 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
760 -
761 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
401 +(% style="background-color:#fcf8e3" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
402 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
762 762  )))
763 -
764 -
765 -**Restart the gateway-rs**
766 -
767 -(% class="box infomessage" %)
768 -(((
769 -**systemctl restart helium_gateway**
770 770  )))
771 771  
772 -[[image:image-20230425155612-7.png||height="265" width="911"]]
406 +[[image:image-20220728102000-1.png]]
773 773  
774 774  
409 += **6. How users can access LPS8v2 using serial USB** =
775 775  
776 -**Check the helium_gateway running status**
777 777  
412 +**USB TTL to LPS8v2  Connection:**
778 778  
779 -(% class="box infomessage" %)
780 -(((
781 -**systemctl status helium_gateway**
782 -)))
414 +Port 1 of the UART on the LPS8v2 is GND
783 783  
784 -
785 -[[image:image-20230425154740-5.png]]
786 -
787 -
788 -
789 -**Check the helium_gateway Log：**
790 -
791 791  (% class="box infomessage" %)
792 792  (((
793 -**journalctl -u helium_gateway -f**
794 -)))
418 +TXD  <~-~--> UART RXD (Gray line)
795 795  
420 +RXD  <~-~--> UART TXD (White line)
796 796  
797 -[[image:image-20230425155659-8.png]]
798 -
799 -
800 -= 8. OTA System Update =
801 -
802 -
803 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
804 -
805 -
806 -= 9. FAQ =
807 -
808 -== 9.1 How to change Hostname ==
809 -
810 -
811 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
812 -
813 -(% class="box infomessage" %)
814 -(((
815 -hostnamectl set-hostname dragino-123456
422 +GND <~-~--> GND (Black line)
816 816  )))
817 817  
818 -[[image:image-20230517102429-1.png]]
819 819  
820 -After the configuration is complete, run "reboot" to restart the gateway.
426 +**LPS8v2 UART connection photo**
821 821  
428 +[[image:image-20220804163015-1.png||height="621" width="466"]]
822 822  
823 -== 9.2 Build-in The Things Network migrate to ChirpStack ==
824 824  
825 825  
826 -Migrate guide:
432 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
827 827  
828 -1. Ensure that the gateway is in good network condition, Recommended use of ETH.
434 +[[image:image-20220804164928-3.png||height="320" width="332"]]
829 829  
830 -2. Download migrate script and run it.
436 +[[image:image-20220804164747-2.png||height="622" width="594"]]
831 831  
832 -(% class="box infomessage" %)
833 -(((
834 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
835 -)))
438 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
836 836  
837 -[[image:image-20230602135658-1.png||height="545" width="986"]]
838 838  
839 -3. Wait for the script to complete，Enable the Chirpstack on Web UI
840 -
841 -[[image:image-20230602135825-2.png||height="356" width="855"]]
842 -
843 -The default account for chirpstack is: **admin/admin**
844 -
845 -
846 -= 10. Trouble Shooting =
847 -
848 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
849 -
850 -
851 -[[image:image-20220920135918-1.png]]
852 -
853 -
854 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
855 -
856 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
857 -
858 -
859 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
860 -
861 -**Click the update URL button to configure the URL with the current eth port address.**
862 -
863 -[[image:image-20220920141936-2.png]]
864 -
865 -
866 -== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
867 -
868 -
869 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
870 -
871 -[[image:image-20230508171607-1.png]]
872 -
873 -
874 -== 10.3  Fallback IP does not work, how can users check ==
875 -
876 -
877 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
878 -
879 -
880 -**1.Check whether the configuration is correct**
881 -
882 -Run the CMD command to ipconfig and ping 172.31.255.254.
883 -
884 -If this fails, the user needs to reconfigure.
885 -
886 -[[image:image-20230413170224-3.png||height="433" width="707"]]
887 -
888 -[[image:image-20230413170246-4.png]]
889 -
890 -
891 -**2. Check whether the firewall is disabled**
892 -
893 -If the firewall is not down, this will affect access to the gateway.
894 -
895 -
896 -== 10.4  Click "Manual_Update", why there is no response? ==
897 -
898 -
899 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
900 -
901 -
902 -[[image:image-20230527090555-3.png||height="660" width="832"]]
903 -
904 -
905 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
906 -
907 -
908 908  (((
909 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
442 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
910 910  )))
911 911  
912 912  (((
913 -With your question as detailed as possible. We will reply and help you in the shortest.
446 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
914 914  
915 915  
916 -= 12. Reference =
917 917  
450 += **11 Reference** =
918 918  
452 +
919 919  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
920 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
921 921  
922 922  
923 923  )))
924 924  
925 -= 13. Order Info =
458 += **12. Order Info** =
926 926  
927 927  
928 928  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -946,9 +946,10 @@
946 946  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
947 947  
948 948  
949 -= 14. Manufacturer Info =
950 950  
483 += **13. Manufacturer Info** =
951 951  
485 +
952 952  **Shenzhen Dragino Technology Development co. LTD**
953 953  
954 954  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -956,9 +956,10 @@
956 956  LongCheng Street, LongGang District ; Shenzhen 518116,China
957 957  
958 958  
959 -= 15. FCC Warning =
960 960  
494 += **14. FCC Warning** =
961 961  
496 +
962 962  (((
963 963  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
964 964  )))
... ... @@ -987,7 +987,5 @@
987 987  
988 988  (((
989 989  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
990 -
991 -
992 992  )))
993 993  )))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0