Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 211.1 >
edited by Kilight Cao
on 2023/06/02 14:32
To version < 117.1 >
edited by Kilight Cao
on 2022/12/28 11:03
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,16 +57,14 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
69 +== **1.3 Features** ==
70 70  
71 71  
72 72  * Open Source Debian system
... ... @@ -81,37 +81,38 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 Block Diagram ==
87 +== **1.4 Block Diagram** ==
88 88  
89 89  
90 90  
91 -== 1.5 LED Indicators ==
91 +== **1.5 LED Indicators** ==
92 92  
93 93  
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
97 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
97 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
98 98  
99 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
99 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
100 100  
101 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
101 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
102 102  
103 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
104 104  
105 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
106 106  
107 - ✓** SOLID RED:** Device doesn't have an Internet connection.
107 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
108 108  
109 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
109 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
110 110  
111 111  
112 -== 1.6 Button Intruction ==
113 113  
113 +== **1.6 Button Intruction** ==
114 114  
115 +
115 115  LPS8-V2 has a black toggle button, which is:
116 116  
117 117  
... ... @@ -125,41 +125,27 @@
125 125   //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 126  
127 127  
128 -= 2. Quick Start =
129 129  
130 += **2. Quick Start** =
130 130  
132 +
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
137 137  
138 -=== 2.1.1 connect the network ===
139 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
139 139  
140 140  
141 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
142 +== **2.1.1 connect the network.** ==
142 142  
143 143  
144 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
145 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
145 145  
146 - (% style="background-color:yellow" %)**dragino+dragino**
147 147  
148 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 -
150 -[[image:image-20230527084515-1.png]]
151 -
152 -[[image:image-20230527085250-2.png||height="495" width="284"]]
153 -
154 -
155 -If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
156 -
157 -
158 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
159 -
160 -
161 161  (((
162 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
149 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
163 163  )))
164 164  
165 165  (((
... ... @@ -170,40 +170,9 @@
170 170  
171 171  
172 172  
173 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
160 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
174 174  
175 175  
176 -[[image:image-20230107084650-2.png||height="310" width="839"]]
177 -
178 -
179 -(% style="color:blue" %)**Steps to connect via fallback IP:**
180 -
181 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
182 -
183 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
184 -
185 -
186 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
187 -
188 -
189 -As in the below photo:
190 -
191 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
192 -
193 -
194 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
195 -
196 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
197 -
198 -
199 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
200 -
201 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
202 -
203 -
204 -
205 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
206 -
207 207  [[image:image-20220622100542-2.png||height="369" width="1256"]]
208 208  
209 209  
... ... @@ -223,103 +223,13 @@
223 223  [[image:image-20220622102901-8.png||height="476" width="938"]]
224 224  
225 225  
226 -=== 2.1.2 Access Configure Web UI ===
227 227  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
228 228  
229 -**Web Interface**
230 230  
231 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
232 232  
233 233  
234 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
235 -
236 -You will see the login interface of LPS8-V2 as shown below.
237 -
238 -The account details for Web Login are:
239 -
240 -(% style="color:blue" %)**User Name: root**
241 -
242 -(% style="color:blue" %)**Password:   dragino**
243 -
244 -[[image:image-20230106153501-1.png||height="367" width="894"]]
245 -
246 -
247 -== 2.2  Typical Network Setup ==
248 -
249 -=== 2.2.1  Overview ===
250 -
251 -
252 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
253 -
254 -* **WAN Port Internet Mode**
255 -
256 -* **WiFi Client Mode**
257 -
258 -* **Cellular Mode**
259 -
260 -=== 2.2.2  Use WAN port to access Internet ===
261 -
262 -
263 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
264 -
265 -
266 -[[image:image-20230411100633-2.png||height="501" width="935"]]
267 -
268 -
269 -=== 2.2.3  Access the Internet as a WiFi Client ===
270 -
271 -
272 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
273 -
274 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
275 -
276 -[[image:image-20230411095739-1.png||height="264" width="691"]]
277 -
278 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
279 -
280 -
281 -=== 2.2.4  Use built-in 4G modem for internet access ===
282 -
283 -
284 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
285 -
286 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
287 -
288 -
289 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
290 -
291 -First, install the Micro SIM card as below direction
292 -
293 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
294 -
295 -
296 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
297 -
298 -
299 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
300 -
301 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
302 -
303 -
304 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
305 -
306 -
307 -=== 2.2.5  Check Internet connection ===
308 -
309 -In the **home** page, we can check the Internet connection.
310 -
311 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
312 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
313 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
314 -
315 -[[image:image-20230411101534-3.png||height="544" width="942"]]
316 -
317 -
318 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
319 -
320 -=== 2.3.1 Select your area frequency ===
321 -
322 -
323 323  (((
324 324  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
325 325  
... ... @@ -329,9 +329,10 @@
329 329  [[image:image-20220622103332-9.png||height="485" width="938"]]
330 330  
331 331  
332 -=== 2.3.2 Get the only gateway EUI ===
333 333  
199 +=== **2.2.2 Get the only gateway EUI** ===
334 334  
201 +
335 335  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
336 336  
337 337  
... ... @@ -353,9 +353,10 @@
353 353  [[image:image-20220622103956-12.png]]
354 354  
355 355  
356 -=== 2.3.3 Register the gateway to The Things Network ===
357 357  
224 +== **2.2.3 Register the gateway to The Things Network** ==
358 358  
226 +
359 359  **Login to The Things Network**
360 360  
361 361  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -369,30 +369,34 @@
369 369  **Get it online**
370 370  
371 371  
372 -= 3. Web Configure Pages =
373 373  
374 -== 3.1 Home ==
241 += **3. Web Configure Pages** =
375 375  
376 376  
377 -Shows the system running status:
244 +== **3.1 Home** ==
378 378  
246 +
247 +//Shows the system running status~://
248 +
379 379  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
380 380  
381 381  
382 -== 3.2 LoRa Settings ==
383 383  
384 -=== 3.2.1 LoRa ~-~-> LoRa ===
253 +== **3.2 LoRa Settings** ==
385 385  
386 386  
387 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
256 +=== **3.2.1 LoRa ~-~-> LoRa** ===
388 388  
389 -Different LPS8v2 hardware versions can support different frequency ranges:
390 390  
391 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
392 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
259 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
393 393  
261 +//Different LPS8v2 hardware versions can support different frequency ranges~://
262 +
263 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
264 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
265 +
394 394  (% class="wikigeneratedid" %)
395 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
267 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
396 396  
397 397  
398 398  (% class="wikigeneratedid" %)
... ... @@ -404,23 +404,26 @@
404 404  )))
405 405  
406 406  
407 -== 3.3 LoRaWAN Settings ==
408 408  
409 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
280 +== **3.3 LoRaWAN Settings** ==
410 410  
411 411  
412 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
283 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
413 413  
414 414  
286 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
287 +
288 +
415 415  [[image:image-20220616111932-2.png||height="516" width="672"]]
416 416  
417 417  
418 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
419 419  
293 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
420 420  
421 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
422 422  
296 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
423 423  
298 +
424 424  [[image:image-20220616113246-3.png||height="396" width="672"]]
425 425  
426 426  
... ... @@ -429,95 +429,57 @@
429 429  )))
430 430  
431 431  
432 -== 3.4 Network Settings ==
433 433  
434 -=== 3.4.1 Network ~-~-> WiFi ===
308 +== **3.4 Network Settings** ==
435 435  
436 436  
437 -[[image:image-20220616114756-4.png||height="251" width="669"]]
311 +=== **3.4.1 Network ~-~-> WiFi** ===
438 438  
439 439  
440 -=== 3.4.2 Network ~-~-> System Status ===
314 +[[image:image-20220616114756-4.png||height="251" width="669"]]
441 441  
442 442  
443 -[[image:image-20220820134112-2.png||height="539" width="668"]]
444 444  
318 +=== **3.4.2 Network ~-~-> System Status** ===
445 445  
446 -=== 3.4.3 Network ~-~-> Network ===
447 447  
321 +[[image:image-20220820134112-2.png||height="539" width="668"]]
448 448  
449 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
450 450  
451 -[[image:image-20230214093657-2.png||height="333" width="858"]]
452 452  
325 +=== **3.4.3 Network ~-~-> Firewall** ===
453 453  
454 -=== 3.4.4 Network ~-~-> Cellular ===
455 455  
328 +[[image:image-20220616115351-6.png||height="244" width="661"]]
456 456  
457 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
458 458  
459 -(% style="color:red" %)**Note: APN cannot be empty.**
460 460  
461 -[[image:image-20230228115126-1.png]]
332 +== **3.5 System** ==
462 462  
463 463  
464 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
335 +=== **3.5.1  System ~-~-> System Overview** ===
465 465  
466 -[[image:image-20230228115535-2.png||height="478" width="888"]]
467 467  
468 -
469 -== 3.5 System ==
470 -
471 -=== 3.5.1 System ~-~-> System Overview ===
472 -
473 -
474 474  Shows the system info:
475 475  
476 476  [[image:image-20220917144512-5.png||height="618" width="853"]]
477 477  
478 478  
479 -=== 3.5.2 System ~-~-> System General ===
480 480  
344 +=== **3.5.2 System ~-~-> Backup/Restore** ===
481 481  
482 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
483 483  
484 -In addition, Users can customize the FallBack IP address.
485 -
486 -[[image:image-20230214094058-3.png]]
487 -
488 -
489 -=== 3.5.3 System ~-~-> Backup/Restore ===
490 -
491 -
492 492  [[image:image-20220917144725-6.png||height="208" width="869"]]
493 493  
494 494  
495 -=== 3.5.4 System ~-~-> Remoteit ===
496 496  
351 += **4. Build-in Server** =
497 497  
498 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
499 499  
500 -
501 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
502 -
503 -[[image:image-20221230092303-2.png]]
504 -
505 -
506 -=== 3.5.5 System ~-~-> Package Management ===
507 -
508 -
509 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
510 -
511 -[[image:image-20230214094316-4.png]]
512 -
513 -
514 -= 4. Build-in Server =
515 -
516 -
517 517  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
518 518  
519 519  
520 -[[image:image-20230214095318-5.png||height="347" width="980"]]
357 +[[image:image-20220820115644-1.png||height="217" width="778"]]
521 521  
522 522  
523 523  (% style="color:red" %)**Note:**
... ... @@ -535,9 +535,10 @@
535 535   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
536 536  
537 537  
538 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
539 539  
376 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
540 540  
378 +
541 541  You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
542 542  
543 543  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
... ... @@ -553,19 +553,10 @@
553 553  [[image:image-20220725171719-1.png||height="570" width="769"]]
554 554  
555 555  
556 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
557 557  
395 +== **4.2 Application Server ~-~- Node-Red** ==
558 558  
559 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
560 560  
561 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
562 -
563 -[[image:image-20230321092456-1.png]]
564 -
565 -
566 -== 4.2 Application Server ~-~- Node-Red ==
567 -
568 -
569 569  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
570 570  
571 571  
... ... @@ -576,7 +576,7 @@
576 576  
577 577  
578 578  
579 -=== **Using Node-Red, InfluxDB and Grafana** ===
408 +=== **Using Node-Red, InfluxDB and Grafana,** ===
580 580  
581 581  The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
582 582  
... ... @@ -586,92 +586,16 @@
586 586  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
587 587  
588 588  
589 -=== **Upgrade the node.js** ===
418 += **5. How users can access LPS8v2 using serial USB** =
590 590  
591 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
592 592  
421 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
593 593  
594 -the users can refer to this link to upgrade them.
595 595  
596 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
424 +Port 1 of the UART on the LPS8v2 is GND
597 597  
598 -
599 -== 4.3 How to disable the built-in server ==
600 -
601 -
602 -Use the following commands to start and stop the TTNv3 service:
603 -
604 604  (% class="box infomessage" %)
605 605  (((
606 -**# start**
607 -systemctl start ttnstack
608 -
609 -**# stop**
610 -systemctl stop ttnstack
611 -
612 -**# enable**
613 -systemctl enable ttnstack
614 -
615 -**#disable**
616 -systemctl disable ttnstack
617 -)))
618 -
619 -Use the following commands to start and stop the Node-Red service:
620 -
621 -(% class="box infomessage" %)
622 -(((
623 -**# start**
624 -systemctl start nodered
625 -
626 -**# stop**
627 -systemctl stop nodered
628 -
629 -**# enable**
630 -systemctl enable nodered
631 -
632 -**#disable**
633 -systemctl disable nodered
634 -)))
635 -
636 -
637 -== 4.4 How to use ChirpStack on LPS8-V2 ==
638 -
639 -
640 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
641 -
642 -**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
643 -
644 -
645 -=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
646 -
647 -
648 -On the Server ~-~-> Network Server interface, choose the frequency Plan first.
649 -
650 -If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
651 -
652 -[[image:image-20230602140406-3.png||height="480" width="918"]]
653 -
654 -
655 -When the configuration is complete, click "Save&Apply".
656 -
657 -(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
658 -
659 -[[image:image-20230602143122-4.png||height="511" width="983"]]
660 -
661 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
662 -
663 -
664 -
665 -= 6. How users can access LPS8-V2 using serial USB =
666 -
667 -
668 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
669 -
670 -
671 -Port 1 of the UART on the LPS8-V2 is GND
672 -
673 -(% class="box infomessage" %)
674 -(((
675 675  **TXD  <~-~--> UART RXD (Gray line)**
676 676  
677 677  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -682,9 +682,10 @@
682 682  
683 683  **LPS8v2 UART connection photo**
684 684  
438 +[[image:image-20220804163015-1.png||height="621" width="466"]]
685 685  
686 -[[image:image-20230421094319-2.png||height="351" width="392"]]
687 687  
441 +
688 688  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
689 689  
690 690  
... ... @@ -694,9 +694,10 @@
694 694  [[image:image-20220804164747-2.png||height="622" width="594"]]
695 695  
696 696  
697 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
698 698  
452 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
699 699  
454 +
700 700  == **Step 1: Configure Frequency Band** ==
701 701  
702 702  
... ... @@ -722,72 +722,59 @@
722 722  
723 723  **Access the gateway CLI via SSH.**
724 724  
725 -[[image:image-20230425153417-2.png]]
480 +[[image:image-20220905165222-3.png]]
726 726  
727 727  
728 -**Install the new gateway-rs**
483 +**Download gateway-rs.**
729 729  
485 +[[image:image-20220905165715-5.png]]
486 +
730 730  (% class="box infomessage" %)
731 731  (((
732 -**apt update && apt install helium-gateway**
489 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
733 733  )))
734 734  
735 -[[image:image-20230425154058-4.png]]
736 736  
493 +**Install gateway-rs.**
737 737  
495 +[[image:image-20220905165917-7.png]]
738 738  
739 -Option: If you installed the older gateway-rs, you have clean it
740 -
741 741  (% class="box infomessage" %)
742 742  (((
743 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
499 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
744 744  )))
745 745  
746 -[[image:image-20230425153823-3.png]]
747 747  
503 +**Modify configuration.**
748 748  
749 -**Change the region setting:**
750 750  
506 +[[image:image-20220905173847-12.png]]
751 751  
752 -(% class="box infomessage" %)
753 -(((
754 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
755 755  
756 -
757 -**e.g: **
758 -
759 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
760 -
761 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
762 -)))
763 -
764 -
765 -**Restart the gateway-rs**
766 -
767 767  (% class="box infomessage" %)
768 768  (((
769 -**systemctl restart helium_gateway**
511 +**region=<Enter regional parameters> \
512 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
513 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
770 770  )))
771 771  
772 -[[image:image-20230425155612-7.png||height="265" width="911"]]
773 773  
517 +**Restart the helium_gateway**
774 774  
519 +[[image:image-20220905170920-9.png]]
775 775  
776 -**Check the helium_gateway running status**
777 777  
778 -
779 779  (% class="box infomessage" %)
780 780  (((
781 -**systemctl status helium_gateway**
524 +**systemctl restart helium_gateway**
782 782  )))
783 783  
784 784  
785 -[[image:image-20230425154740-5.png]]
528 +**Check the helium_gateway Log：**
786 786  
530 +[[image:image-20220905173952-13.png]]
787 787  
788 788  
789 -**Check the helium_gateway Log：**
790 -
791 791  (% class="box infomessage" %)
792 792  (((
793 793  **journalctl -u helium_gateway -f**
... ... @@ -794,60 +794,28 @@
794 794  )))
795 795  
796 796  
797 -[[image:image-20230425155659-8.png]]
539 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
798 798  
541 +where the helium gateway log is shown:
799 799  
800 -= 8. OTA System Update =
543 +[[image:image-20220905174534-14.png]]
801 801  
802 802  
803 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
546 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
804 804  
805 805  
806 -= 9. FAQ =
549 += **7. OTA System Update** =
807 807  
808 -== 9.1 How to change Hostname ==
809 809  
552 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
810 810  
811 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
812 812  
813 -(% class="box infomessage" %)
814 -(((
815 -hostnamectl set-hostname dragino-123456
816 -)))
555 += **8. Trouble Shooting** =
817 817  
818 -[[image:image-20230517102429-1.png]]
819 819  
820 -After the configuration is complete, run "reboot" to restart the gateway.
558 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
821 821  
822 822  
823 -== 9.2 Build-in The Things Network migrate to ChirpStack ==
824 -
825 -
826 -Migrate guide:
827 -
828 -1. Ensure that the gateway is in good network condition, Recommended use of ETH.
829 -
830 -2. Download migrate script and run it.
831 -
832 -(% class="box infomessage" %)
833 -(((
834 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
835 -)))
836 -
837 -[[image:image-20230602135658-1.png||height="545" width="986"]]
838 -
839 -3. Wait for the script to complete，Enable the Chirpstack on Web UI
840 -
841 -[[image:image-20230602135825-2.png||height="356" width="855"]]
842 -
843 -The default account for chirpstack is: **admin/admin**
844 -
845 -
846 -= 10. Trouble Shooting =
847 -
848 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
849 -
850 -
851 851  [[image:image-20220920135918-1.png]]
852 852  
853 853  
... ... @@ -863,59 +863,23 @@
863 863  [[image:image-20220920141936-2.png]]
864 864  
865 865  
866 -== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
867 867  
868 868  
869 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
578 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**9. Supports**(%%) =
870 870  
871 -[[image:image-20230508171607-1.png]]
872 872  
873 -
874 -== 10.3  Fallback IP does not work, how can users check ==
875 -
876 -
877 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
878 -
879 -
880 -**1.Check whether the configuration is correct**
881 -
882 -Run the CMD command to ipconfig and ping 172.31.255.254.
883 -
884 -If this fails, the user needs to reconfigure.
885 -
886 -[[image:image-20230413170224-3.png||height="433" width="707"]]
887 -
888 -[[image:image-20230413170246-4.png]]
889 -
890 -
891 -**2. Check whether the firewall is disabled**
892 -
893 -If the firewall is not down, this will affect access to the gateway.
894 -
895 -
896 -== 10.4  Click "Manual_Update", why there is no response? ==
897 -
898 -
899 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
900 -
901 -
902 -[[image:image-20230527090555-3.png||height="660" width="832"]]
903 -
904 -
905 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
906 -
907 -
908 908  (((
909 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
582 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
910 910  )))
911 911  
912 912  (((
913 -With your question as detailed as possible. We will reply and help you in the shortest.
586 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
914 914  
915 915  
916 -= 12. Reference =
917 917  
590 += **10. Reference** =
918 918  
592 +
919 919  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
920 920  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
921 921  
... ... @@ -922,7 +922,7 @@
922 922  
923 923  )))
924 924  
925 -= 13. Order Info =
599 += **11. Order Info** =
926 926  
927 927  
928 928  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -946,9 +946,10 @@
946 946  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
947 947  
948 948  
949 -= 14. Manufacturer Info =
950 950  
624 += **12. Manufacturer Info** =
951 951  
626 +
952 952  **Shenzhen Dragino Technology Development co. LTD**
953 953  
954 954  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -956,9 +956,10 @@
956 956  LongCheng Street, LongGang District ; Shenzhen 518116,China
957 957  
958 958  
959 -= 15. FCC Warning =
960 960  
635 += **13. FCC Warning** =
961 961  
637 +
962 962  (((
963 963  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
964 964  )))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -82.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0