Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 206.1 >
edited by Kilight Cao
on 2023/06/02 13:56
To version < 117.1 >
edited by Kilight Cao
on 2022/12/28 11:03
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,20 +57,16 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 +== **1.3 Features** ==
69 69  
70 70  
71 -== 1.3 Features ==
72 -
73 -
74 74  * Open Source Debian system
75 75  * Managed by Web GUI, SSH via WAN or WiFi
76 76  * Remote Management
... ... @@ -83,39 +83,38 @@
83 83  ** Semtech UDP Packet Forwarder
84 84  ** LoRaWAN Basic Station
85 85  ** ChirpStack-Gateway-Bridge (MQTT)
86 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
88 88  
87 +== **1.4 Block Diagram** ==
89 89  
90 90  
91 -== 1.4 Block Diagram ==
92 92  
91 +== **1.5 LED Indicators** ==
93 93  
94 94  
95 -== 1.5 LED Indicators ==
96 -
97 -
98 98  LPS8-V2 has totally four LEDs, They are:
99 99  
100 100  
101 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
97 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
102 102  
103 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
99 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
104 104  
105 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
101 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
106 106  
107 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
108 108  
109 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
110 110  
111 - ✓** SOLID RED:** Device doesn't have an Internet connection.
107 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
113 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
109 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
114 114  
115 115  
116 -== 1.6 Button Intruction ==
117 117  
113 +== **1.6 Button Intruction** ==
118 118  
115 +
119 119  LPS8-V2 has a black toggle button, which is:
120 120  
121 121  
... ... @@ -129,41 +129,27 @@
129 129   //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
130 130  
131 131  
132 -= 2. Quick Start =
133 133  
130 += **2. Quick Start** =
134 134  
132 +
135 135  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
136 136  
137 137  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
138 138  
139 139  
140 -== 2.1 Connects to the network and accesses the gateway Web UI ==
141 141  
142 -=== 2.1.1 connect the network ===
139 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
143 143  
144 144  
145 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
142 +== **2.1.1 connect the network.** ==
146 146  
147 147  
148 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
145 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
149 149  
150 - (% style="background-color:yellow" %)**dragino+dragino**
151 151  
152 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
153 -
154 -[[image:image-20230527084515-1.png]]
155 -
156 -[[image:image-20230527085250-2.png||height="495" width="284"]]
157 -
158 -
159 -If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
160 -
161 -
162 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
163 -
164 -
165 165  (((
166 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
149 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
167 167  )))
168 168  
169 169  (((
... ... @@ -174,40 +174,9 @@
174 174  
175 175  
176 176  
177 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
160 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
178 178  
179 179  
180 -[[image:image-20230107084650-2.png||height="310" width="839"]]
181 -
182 -
183 -(% style="color:blue" %)**Steps to connect via fallback IP:**
184 -
185 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
186 -
187 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
188 -
189 -
190 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
191 -
192 -
193 -As in the below photo:
194 -
195 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
196 -
197 -
198 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 -
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 -
202 -
203 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
204 -
205 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
206 -
207 -
208 -
209 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
210 -
211 211  [[image:image-20220622100542-2.png||height="369" width="1256"]]
212 212  
213 213  
... ... @@ -227,105 +227,13 @@
227 227  [[image:image-20220622102901-8.png||height="476" width="938"]]
228 228  
229 229  
230 -=== 2.1.2 Access Configure Web UI ===
231 231  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
232 232  
233 -**Web Interface**
234 234  
235 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
236 236  
237 237  
238 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
239 -
240 -You will see the login interface of LPS8-V2 as shown below.
241 -
242 -The account details for Web Login are:
243 -
244 -(% style="color:blue" %)**User Name: root**
245 -
246 -(% style="color:blue" %)**Password:   dragino**
247 -
248 -[[image:image-20230106153501-1.png||height="367" width="894"]]
249 -
250 -
251 -== 2.2  Typical Network Setup ==
252 -
253 -=== 2.2.1  Overview ===
254 -
255 -
256 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
257 -
258 -* **WAN Port Internet Mode**
259 -
260 -* **WiFi Client Mode**
261 -
262 -* **Cellular Mode**
263 -
264 -
265 -
266 -=== 2.2.2  Use WAN port to access Internet ===
267 -
268 -
269 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
270 -
271 -
272 -[[image:image-20230411100633-2.png||height="501" width="935"]]
273 -
274 -
275 -=== 2.2.3  Access the Internet as a WiFi Client ===
276 -
277 -
278 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
279 -
280 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
281 -
282 -[[image:image-20230411095739-1.png||height="264" width="691"]]
283 -
284 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
285 -
286 -
287 -=== 2.2.4  Use built-in 4G modem for internet access ===
288 -
289 -
290 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
291 -
292 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
293 -
294 -
295 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
296 -
297 -First, install the Micro SIM card as below direction
298 -
299 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
300 -
301 -
302 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
303 -
304 -
305 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
306 -
307 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
308 -
309 -
310 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
311 -
312 -
313 -=== 2.2.5  Check Internet connection ===
314 -
315 -In the **home** page, we can check the Internet connection.
316 -
317 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
318 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
319 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
320 -
321 -[[image:image-20230411101534-3.png||height="544" width="942"]]
322 -
323 -
324 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
325 -
326 -=== 2.3.1 Select your area frequency ===
327 -
328 -
329 329  (((
330 330  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
331 331  
... ... @@ -335,9 +335,10 @@
335 335  [[image:image-20220622103332-9.png||height="485" width="938"]]
336 336  
337 337  
338 -=== 2.3.2 Get the only gateway EUI ===
339 339  
199 +=== **2.2.2 Get the only gateway EUI** ===
340 340  
201 +
341 341  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
342 342  
343 343  
... ... @@ -359,9 +359,10 @@
359 359  [[image:image-20220622103956-12.png]]
360 360  
361 361  
362 -=== 2.3.3 Register the gateway to The Things Network ===
363 363  
224 +== **2.2.3 Register the gateway to The Things Network** ==
364 364  
226 +
365 365  **Login to The Things Network**
366 366  
367 367  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -375,30 +375,34 @@
375 375  **Get it online**
376 376  
377 377  
378 -= 3. Web Configure Pages =
379 379  
380 -== 3.1 Home ==
241 += **3. Web Configure Pages** =
381 381  
382 382  
383 -Shows the system running status:
244 +== **3.1 Home** ==
384 384  
246 +
247 +//Shows the system running status~://
248 +
385 385  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
386 386  
387 387  
388 -== 3.2 LoRa Settings ==
389 389  
390 -=== 3.2.1 LoRa ~-~-> LoRa ===
253 +== **3.2 LoRa Settings** ==
391 391  
392 392  
393 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
256 +=== **3.2.1 LoRa ~-~-> LoRa** ===
394 394  
395 -Different LPS8v2 hardware versions can support different frequency ranges:
396 396  
397 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
398 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
259 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
399 399  
261 +//Different LPS8v2 hardware versions can support different frequency ranges~://
262 +
263 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
264 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
265 +
400 400  (% class="wikigeneratedid" %)
401 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
267 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
402 402  
403 403  
404 404  (% class="wikigeneratedid" %)
... ... @@ -410,23 +410,26 @@
410 410  )))
411 411  
412 412  
413 -== 3.3 LoRaWAN Settings ==
414 414  
415 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
280 +== **3.3 LoRaWAN Settings** ==
416 416  
417 417  
418 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
283 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
419 419  
420 420  
286 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
287 +
288 +
421 421  [[image:image-20220616111932-2.png||height="516" width="672"]]
422 422  
423 423  
424 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
425 425  
293 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
426 426  
427 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
428 428  
296 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
429 429  
298 +
430 430  [[image:image-20220616113246-3.png||height="396" width="672"]]
431 431  
432 432  
... ... @@ -435,95 +435,57 @@
435 435  )))
436 436  
437 437  
438 -== 3.4 Network Settings ==
439 439  
440 -=== 3.4.1 Network ~-~-> WiFi ===
308 +== **3.4 Network Settings** ==
441 441  
442 442  
443 -[[image:image-20220616114756-4.png||height="251" width="669"]]
311 +=== **3.4.1 Network ~-~-> WiFi** ===
444 444  
445 445  
446 -=== 3.4.2 Network ~-~-> System Status ===
314 +[[image:image-20220616114756-4.png||height="251" width="669"]]
447 447  
448 448  
449 -[[image:image-20220820134112-2.png||height="539" width="668"]]
450 450  
318 +=== **3.4.2 Network ~-~-> System Status** ===
451 451  
452 -=== 3.4.3 Network ~-~-> Network ===
453 453  
321 +[[image:image-20220820134112-2.png||height="539" width="668"]]
454 454  
455 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
456 456  
457 -[[image:image-20230214093657-2.png||height="333" width="858"]]
458 458  
325 +=== **3.4.3 Network ~-~-> Firewall** ===
459 459  
460 -=== 3.4.4 Network ~-~-> Cellular ===
461 461  
328 +[[image:image-20220616115351-6.png||height="244" width="661"]]
462 462  
463 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
464 464  
465 -(% style="color:red" %)**Note: APN cannot be empty.**
466 466  
467 -[[image:image-20230228115126-1.png]]
332 +== **3.5 System** ==
468 468  
469 469  
470 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
335 +=== **3.5.1  System ~-~-> System Overview** ===
471 471  
472 -[[image:image-20230228115535-2.png||height="478" width="888"]]
473 473  
474 -
475 -== 3.5 System ==
476 -
477 -=== 3.5.1 System ~-~-> System Overview ===
478 -
479 -
480 480  Shows the system info:
481 481  
482 482  [[image:image-20220917144512-5.png||height="618" width="853"]]
483 483  
484 484  
485 -=== 3.5.2 System ~-~-> System General ===
486 486  
344 +=== **3.5.2 System ~-~-> Backup/Restore** ===
487 487  
488 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
489 489  
490 -In addition, Users can customize the FallBack IP address.
491 -
492 -[[image:image-20230214094058-3.png]]
493 -
494 -
495 -=== 3.5.3 System ~-~-> Backup/Restore ===
496 -
497 -
498 498  [[image:image-20220917144725-6.png||height="208" width="869"]]
499 499  
500 500  
501 -=== 3.5.4 System ~-~-> Remoteit ===
502 502  
351 += **4. Build-in Server** =
503 503  
504 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
505 505  
506 -
507 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
508 -
509 -[[image:image-20221230092303-2.png]]
510 -
511 -
512 -=== 3.5.5 System ~-~-> Package Management ===
513 -
514 -
515 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
516 -
517 -[[image:image-20230214094316-4.png]]
518 -
519 -
520 -= 4. Build-in Server =
521 -
522 -
523 523  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
524 524  
525 525  
526 -[[image:image-20230214095318-5.png||height="347" width="980"]]
357 +[[image:image-20220820115644-1.png||height="217" width="778"]]
527 527  
528 528  
529 529  (% style="color:red" %)**Note:**
... ... @@ -541,9 +541,10 @@
541 541   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
542 542  
543 543  
544 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
545 545  
376 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
546 546  
378 +
547 547  You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
548 548  
549 549  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
... ... @@ -559,19 +559,10 @@
559 559  [[image:image-20220725171719-1.png||height="570" width="769"]]
560 560  
561 561  
562 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
563 563  
395 +== **4.2 Application Server ~-~- Node-Red** ==
564 564  
565 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
566 566  
567 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
568 -
569 -[[image:image-20230321092456-1.png]]
570 -
571 -
572 -== 4.2 Application Server ~-~- Node-Red ==
573 -
574 -
575 575  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
576 576  
577 577  
... ... @@ -582,7 +582,7 @@
582 582  
583 583  
584 584  
585 -=== **Using Node-Red, InfluxDB and Grafana** ===
408 +=== **Using Node-Red, InfluxDB and Grafana,** ===
586 586  
587 587  The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
588 588  
... ... @@ -592,78 +592,16 @@
592 592  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
593 593  
594 594  
595 -=== **Upgrade the node.js** ===
418 += **5. How users can access LPS8v2 using serial USB** =
596 596  
597 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
598 598  
421 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
599 599  
600 -the users can refer to this link to upgrade them.
601 601  
602 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
424 +Port 1 of the UART on the LPS8v2 is GND
603 603  
604 -
605 -== 4.3 How to disable the built-in server ==
606 -
607 -
608 -Use the following commands to start and stop the TTNv3 service:
609 -
610 610  (% class="box infomessage" %)
611 611  (((
612 -**# start**
613 -systemctl start ttnstack
614 -
615 -**# stop**
616 -systemctl stop ttnstack
617 -
618 -**# enable**
619 -systemctl enable ttnstack
620 -
621 -**#disable**
622 -systemctl disable ttnstack
623 -)))
624 -
625 -Use the following commands to start and stop the Node-Red service:
626 -
627 -(% class="box infomessage" %)
628 -(((
629 -**# start**
630 -systemctl start nodered
631 -
632 -**# stop**
633 -systemctl stop nodered
634 -
635 -**# enable**
636 -systemctl enable nodered
637 -
638 -**#disable**
639 -systemctl disable nodered
640 -)))
641 -
642 -
643 -== 4.4 How to use ChirpStack on LPS8-V2 ==
644 -
645 -
646 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
647 -
648 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
649 -
650 -[[image:image-20230222094908-1.png||height="133" width="798"]]
651 -
652 -
653 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
654 -
655 -
656 -
657 -= 6. How users can access LPS8-V2 using serial USB =
658 -
659 -
660 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
661 -
662 -
663 -Port 1 of the UART on the LPS8-V2 is GND
664 -
665 -(% class="box infomessage" %)
666 -(((
667 667  **TXD  <~-~--> UART RXD (Gray line)**
668 668  
669 669  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -674,9 +674,10 @@
674 674  
675 675  **LPS8v2 UART connection photo**
676 676  
438 +[[image:image-20220804163015-1.png||height="621" width="466"]]
677 677  
678 -[[image:image-20230421094319-2.png||height="351" width="392"]]
679 679  
441 +
680 680  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
681 681  
682 682  
... ... @@ -686,9 +686,10 @@
686 686  [[image:image-20220804164747-2.png||height="622" width="594"]]
687 687  
688 688  
689 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
690 690  
452 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
691 691  
454 +
692 692  == **Step 1: Configure Frequency Band** ==
693 693  
694 694  
... ... @@ -714,72 +714,59 @@
714 714  
715 715  **Access the gateway CLI via SSH.**
716 716  
717 -[[image:image-20230425153417-2.png]]
480 +[[image:image-20220905165222-3.png]]
718 718  
719 719  
720 -**Install the new gateway-rs**
483 +**Download gateway-rs.**
721 721  
485 +[[image:image-20220905165715-5.png]]
486 +
722 722  (% class="box infomessage" %)
723 723  (((
724 -**apt update && apt install helium-gateway**
489 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
725 725  )))
726 726  
727 -[[image:image-20230425154058-4.png]]
728 728  
493 +**Install gateway-rs.**
729 729  
495 +[[image:image-20220905165917-7.png]]
730 730  
731 -Option: If you installed the older gateway-rs, you have clean it
732 -
733 733  (% class="box infomessage" %)
734 734  (((
735 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
499 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
736 736  )))
737 737  
738 -[[image:image-20230425153823-3.png]]
739 739  
503 +**Modify configuration.**
740 740  
741 -**Change the region setting:**
742 742  
506 +[[image:image-20220905173847-12.png]]
743 743  
744 -(% class="box infomessage" %)
745 -(((
746 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
747 747  
748 -
749 -**e.g: **
750 -
751 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
752 -
753 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
754 -)))
755 -
756 -
757 -**Restart the gateway-rs**
758 -
759 759  (% class="box infomessage" %)
760 760  (((
761 -**systemctl restart helium_gateway**
511 +**region=<Enter regional parameters> \
512 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
513 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
762 762  )))
763 763  
764 -[[image:image-20230425155612-7.png||height="265" width="911"]]
765 765  
517 +**Restart the helium_gateway**
766 766  
519 +[[image:image-20220905170920-9.png]]
767 767  
768 -**Check the helium_gateway running status**
769 769  
770 -
771 771  (% class="box infomessage" %)
772 772  (((
773 -**systemctl status helium_gateway**
524 +**systemctl restart helium_gateway**
774 774  )))
775 775  
776 776  
777 -[[image:image-20230425154740-5.png]]
528 +**Check the helium_gateway Log：**
778 778  
530 +[[image:image-20220905173952-13.png]]
779 779  
780 780  
781 -**Check the helium_gateway Log：**
782 -
783 783  (% class="box infomessage" %)
784 784  (((
785 785  **journalctl -u helium_gateway -f**
... ... @@ -786,37 +786,28 @@
786 786  )))
787 787  
788 788  
789 -[[image:image-20230425155659-8.png]]
539 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
790 790  
541 +where the helium gateway log is shown:
791 791  
792 -= 8. OTA System Update =
543 +[[image:image-20220905174534-14.png]]
793 793  
794 794  
795 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
546 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
796 796  
797 797  
798 -= 9. FAQ =
549 += **7. OTA System Update** =
799 799  
800 -== 9.1 How to change Hostname ==
801 801  
552 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
802 802  
803 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
804 804  
805 -(% class="box infomessage" %)
806 -(((
807 -hostnamectl set-hostname dragino-123456
808 -)))
555 += **8. Trouble Shooting** =
809 809  
810 -[[image:image-20230517102429-1.png]]
811 811  
812 -After the configuration is complete, run "reboot" to restart the gateway.
558 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
813 813  
814 814  
815 -= 10. Trouble Shooting =
816 -
817 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
818 -
819 -
820 820  [[image:image-20220920135918-1.png]]
821 821  
822 822  
... ... @@ -832,67 +832,30 @@
832 832  [[image:image-20220920141936-2.png]]
833 833  
834 834  
835 -== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
836 836  
837 837  
838 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
578 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**9. Supports**(%%) =
839 839  
840 -[[image:image-20230508171607-1.png]]
841 841  
842 -
843 -== 10.3  Fallback IP does not work, how can users check ==
844 -
845 -
846 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
847 -
848 -
849 -**1.Check whether the configuration is correct**
850 -
851 -Run the CMD command to ipconfig and ping 172.31.255.254.
852 -
853 -If this fails, the user needs to reconfigure.
854 -
855 -[[image:image-20230413170224-3.png||height="433" width="707"]]
856 -
857 -[[image:image-20230413170246-4.png]]
858 -
859 -
860 -**2. Check whether the firewall is disabled**
861 -
862 -If the firewall is not down, this will affect access to the gateway.
863 -
864 -
865 -== 10.4  Click "Manual_Update", why there is no response? ==
866 -
867 -
868 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
869 -
870 -
871 -[[image:image-20230527090555-3.png||height="660" width="832"]]
872 -
873 -
874 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
875 -
876 -
877 877  (((
878 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
582 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
879 879  )))
880 880  
881 881  (((
882 -With your question as detailed as possible. We will reply and help you in the shortest.
586 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
883 883  
884 884  
885 -= 12. Reference =
886 886  
590 += **10. Reference** =
887 887  
592 +
888 888  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
889 889  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
890 890  
891 -
892 892  
893 893  )))
894 894  
895 -= 13. Order Info =
599 += **11. Order Info** =
896 896  
897 897  
898 898  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -916,9 +916,10 @@
916 916  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
917 917  
918 918  
919 -= 14. Manufacturer Info =
920 920  
624 += **12. Manufacturer Info** =
921 921  
626 +
922 922  **Shenzhen Dragino Technology Development co. LTD**
923 923  
924 924  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -926,9 +926,10 @@
926 926  LongCheng Street, LongGang District ; Shenzhen 518116,China
927 927  
928 928  
929 -= 15. FCC Warning =
930 930  
635 += **13. FCC Warning** =
931 931  
637 +
932 932  (((
933 933  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
934 934  )))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0