Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 205.4 >
edited by Xiaoling
on 2023/05/27 14:59
To version < 80.1 >
edited by Edwin Chen
on 2022/08/15 10:53
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -13,25 +13,22 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
27 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
31 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
39 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,20 +57,16 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
61 +* Work Temperature: -20 ~~ 65°C
62 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
65 +== **1.3 Features** ==
69 69  
70 70  
71 -== 1.3 Features ==
72 -
73 -
74 74  * Open Source Debian system
75 75  * Managed by Web GUI, SSH via WAN or WiFi
76 76  * Remote Management
... ... @@ -83,87 +83,55 @@
83 83  ** Semtech UDP Packet Forwarder
84 84  ** LoRaWAN Basic Station
85 85  ** ChirpStack-Gateway-Bridge (MQTT)
86 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
80 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
81 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
88 88  
83 +== **1.4 Block Diagram** ==
89 89  
90 90  
91 -== 1.4 Block Diagram ==
92 92  
87 +== **1.5 LED Indicators** ==
93 93  
94 94  
95 -== 1.5 LED Indicators ==
96 -
97 -
98 98  LPS8-V2 has totally four LEDs, They are:
99 99  
100 100  
101 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
93 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
102 102  
103 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
95 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
104 104  
105 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
97 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
106 106  
107 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
108 108  
109 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
110 110  
111 - ✓** SOLID RED:** Device doesn't have an Internet connection.
103 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
113 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
105 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
114 114  
115 115  
116 -== 1.6 Button Intruction ==
117 117  
109 += **2. Quick Start** =
118 118  
119 -LPS8-V2 has a black toggle button, which is:
120 120  
121 -
122 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123 -
124 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
125 -
126 -
127 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
128 -
129 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
130 -
131 -
132 -= 2. Quick Start =
133 -
134 -
135 135  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
136 136  
137 137  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
138 138  
139 139  
140 -== 2.1 Connects to the network and accesses the gateway Web UI ==
141 141  
142 -=== 2.1.1 connect the network ===
118 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
143 143  
144 144  
145 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
121 +== **2.1.1 connect the network.** ==
146 146  
147 147  
148 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
124 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
149 149  
150 - (% style="background-color:yellow" %)**dragino+dragino**
151 151  
152 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
153 -
154 -[[image:image-20230527084515-1.png]]
155 -
156 -[[image:image-20230527085250-2.png||height="495" width="284"]]
157 -
158 -
159 -If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
160 -
161 -
162 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
163 -
164 -
165 165  (((
166 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
128 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
167 167  )))
168 168  
169 169  (((
... ... @@ -174,43 +174,33 @@
174 174  
175 175  
176 176  
177 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
139 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
178 178  
179 179  
180 -[[image:image-20230107084650-2.png||height="310" width="839"]]
142 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
181 181  
182 182  
183 -(% style="color:blue" %)**Steps to connect via fallback IP:**
145 +(((
146 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
147 +)))
184 184  
185 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
186 186  
187 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
188 188  
151 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
189 189  
190 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
153 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
191 191  
155 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
192 192  
193 -As in the below photo:
157 +[[image:image-20220622101433-4.png]]
194 194  
195 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
196 196  
160 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
197 197  
198 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 199  
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
163 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
201 201  
202 202  
203 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
204 -
205 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
206 -
207 -
208 -
209 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
210 -
211 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
212 -
213 -
214 214  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
215 215  
216 216  
... ... @@ -224,122 +224,32 @@
224 224  [[image:image-20220622102847-7.png]]
225 225  
226 226  
227 -[[image:image-20220622102901-8.png||height="476" width="938"]]
179 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
228 228  
229 229  
230 -=== 2.1.2 Access Configure Web UI ===
231 231  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
232 232  
233 -**Web Interface**
234 234  
235 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
236 236  
237 237  
238 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
239 -
240 -You will see the login interface of LPS8-V2 as shown below.
241 -
242 -The account details for Web Login are:
243 -
244 -(% style="color:blue" %)**User Name: root**
245 -
246 -(% style="color:blue" %)**Password:   dragino**
247 -
248 -[[image:image-20230106153501-1.png||height="367" width="894"]]
249 -
250 -
251 -== 2.2  Typical Network Setup ==
252 -
253 -=== 2.2.1  Overview ===
254 -
255 -
256 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
257 -
258 -* **WAN Port Internet Mode**
259 -* **WiFi Client Mode**
260 -* **Cellular Mode**
261 -
262 -=== 2.2.2  Use WAN port to access Internet ===
263 -
264 -
265 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
266 -
267 -
268 -[[image:image-20230411100633-2.png||height="501" width="935"]]
269 -
270 -
271 -=== 2.2.3  Access the Internet as a WiFi Client ===
272 -
273 -
274 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
275 -
276 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
277 -
278 -[[image:image-20230411095739-1.png||height="264" width="691"]]
279 -
280 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
281 -
282 -
283 -=== 2.2.4  Use built-in 4G modem for internet access ===
284 -
285 -
286 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
287 -
288 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
289 -
290 -
291 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
292 -
293 -First, install the Micro SIM card as below direction
294 -
295 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
296 -
297 -
298 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
299 -
300 -
301 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
302 -
303 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
304 -
305 -
306 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
307 -
308 -
309 -=== 2.2.5  Check Internet connection ===
310 -
311 -In the **home** page, we can check the Internet connection.
312 -
313 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
314 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
315 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
316 -
317 -[[image:image-20230411101534-3.png||height="544" width="942"]]
318 -
319 -
320 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
321 -
322 -=== 2.3.1 Select your area frequency ===
323 -
324 -
325 325  (((
326 326  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
327 -
328 -
329 329  )))
330 330  
331 -[[image:image-20220622103332-9.png||height="485" width="938"]]
193 +[[image:image-20220622103332-9.png]]
332 332  
333 333  
334 -=== 2.3.2 Get the only gateway EUI ===
335 335  
197 +=== **2.2.2 Get the only gateway EUI** ===
336 336  
199 +
337 337  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
338 338  
202 +[[image:image-20220622103355-10.png]]
339 339  
340 -[[image:image-20220622103355-10.png||height="698" width="949"]]
341 341  
342 -
343 343  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
344 344  
345 345  
... ... @@ -355,9 +355,10 @@
355 355  [[image:image-20220622103956-12.png]]
356 356  
357 357  
358 -=== 2.3.3 Register the gateway to The Things Network ===
359 359  
221 +== 2.2.3 Register the gateway to The Things Network ==
360 360  
223 +
361 361  **Login to The Things Network**
362 362  
363 363  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -371,177 +371,117 @@
371 371  **Get it online**
372 372  
373 373  
374 -= 3. Web Configure Pages =
375 375  
376 -== 3.1 Home ==
238 += **3. Web Configure Pages** =
377 377  
378 378  
379 -Shows the system running status:
241 +== **3.1 Home** ==
380 380  
381 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
382 382  
244 +//Shows the system running status~://
383 383  
384 -== 3.2 LoRa Settings ==
385 385  
386 -=== 3.2.1 LoRa ~-~-> LoRa ===
247 +== **3.2 LoRa Settings** ==
387 387  
388 388  
389 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
250 +=== **3.2.1 LoRa ~-~-> LoRa** ===
390 390  
391 -Different LPS8v2 hardware versions can support different frequency ranges:
392 392  
393 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
394 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
253 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
395 395  
396 -(% class="wikigeneratedid" %)
397 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
255 +//Different LPS8v2 hardware versions can support different frequency ranges~://
398 398  
257 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
258 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
399 399  
400 400  (% class="wikigeneratedid" %)
261 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
262 +
263 +(% class="wikigeneratedid" %)
401 401  [[image:image-20220616110739-1.png||height="372" width="682"]]
402 402  
403 403  
404 404  (((
405 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
268 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
406 406  )))
407 407  
408 408  
409 -== 3.3 LoRaWAN Settings ==
410 410  
411 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
273 +== **3.3 LoRaWAN Settings** ==
412 412  
413 413  
414 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
276 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
415 415  
416 416  
279 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
280 +
417 417  [[image:image-20220616111932-2.png||height="516" width="672"]]
418 418  
419 419  
420 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
421 421  
285 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
422 422  
423 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
424 424  
288 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
425 425  
426 426  [[image:image-20220616113246-3.png||height="396" width="672"]]
427 427  
428 428  
429 429  (((
430 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
294 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
431 431  )))
432 432  
433 433  
434 -== 3.4 Network Settings ==
435 435  
436 -=== 3.4.1 Network ~-~-> WiFi ===
299 +== **3.4 Network Settings** ==
437 437  
438 438  
439 -[[image:image-20220616114756-4.png||height="251" width="669"]]
302 +=== **3.4.1 Network ~-~-> WiFi** ===
440 440  
441 441  
442 -=== 3.4.2 Network ~-~-> System Status ===
305 +[[image:image-20220616114756-4.png||height="251" width="669"]]
443 443  
444 444  
445 -[[image:image-20220820134112-2.png||height="539" width="668"]]
446 446  
309 +=== **3.4.2 Network ~-~-> System Status** ===
447 447  
448 -=== 3.4.3 Network ~-~-> Network ===
449 449  
312 +[[image:image-20220616115229-5.png||height="548" width="665"]]
450 450  
451 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
452 452  
453 -[[image:image-20230214093657-2.png||height="333" width="858"]]
454 454  
316 +=== **3.4.3 Network ~-~-> Firewall** ===
455 455  
456 -=== 3.4.4 Network ~-~-> Cellular ===
457 457  
319 +[[image:image-20220616115351-6.png||height="244" width="661"]]
458 458  
459 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
460 460  
461 -(% style="color:red" %)**Note: APN cannot be empty.**
462 462  
463 -[[image:image-20230228115126-1.png]]
323 +== **3.5 System** ==
464 464  
465 465  
466 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
326 +=== **3.5.1  System ~-~-> System Overview** ===
467 467  
468 -[[image:image-20230228115535-2.png||height="478" width="888"]]
469 469  
470 -
471 -== 3.5 System ==
472 -
473 -=== 3.5.1 System ~-~-> System Overview ===
474 -
475 -
476 476  Shows the system info:
477 477  
478 -[[image:image-20220917144512-5.png||height="618" width="853"]]
479 479  
480 480  
481 -=== 3.5.2 System ~-~-> System General ===
333 +=== **3.5.2 System ~-~-> Backup/Restore** ===
482 482  
483 483  
484 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
336 +[[image:image-20220616115808-7.png||height="194" width="649"]]
485 485  
486 -In addition, Users can customize the FallBack IP address.
487 487  
488 -[[image:image-20230214094058-3.png]]
489 489  
340 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
490 490  
491 -=== 3.5.3 System ~-~-> Backup/Restore ===
492 492  
343 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
493 493  
494 -[[image:image-20220917144725-6.png||height="208" width="869"]]
345 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
495 495  
496 496  
497 -=== 3.5.4 System ~-~-> Remoteit ===
498 -
499 -
500 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
501 -
502 -
503 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
504 -
505 -[[image:image-20221230092303-2.png]]
506 -
507 -
508 -=== 3.5.5 System ~-~-> Package Management ===
509 -
510 -
511 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
512 -
513 -[[image:image-20230214094316-4.png]]
514 -
515 -
516 -= 4. Build-in Server =
517 -
518 -
519 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
520 -
521 -
522 -[[image:image-20230214095318-5.png||height="347" width="980"]]
523 -
524 -
525 -(% style="color:red" %)**Note:**
526 -
527 - **Path**: System ~-~-> Built-in Server
528 -
529 -
530 -**Troubleshooting:**
531 -
532 -
533 -**~ 1. URL does not jump properly**
534 -
535 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
536 -
537 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
538 -
539 -
540 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
541 -
542 -
543 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
544 -
545 545  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
546 546  
547 547  
... ... @@ -555,333 +555,98 @@
555 555  [[image:image-20220725171719-1.png||height="570" width="769"]]
556 556  
557 557  
558 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
559 -
560 -
561 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
562 -
563 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
564 -
565 -[[image:image-20230321092456-1.png]]
566 -
567 -
568 -== 4.2 Application Server ~-~- Node-Red ==
569 -
570 -
571 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
572 -
573 -
574 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
575 -
576 -
577 -[[image:image-20220725172124-3.png||height="610" width="843"]]
578 -
579 -
580 -
581 -=== **Using Node-Red, InfluxDB and Grafana** ===
582 -
583 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
584 -
585 -
586 -the users can refer to this link to install them.
587 -
588 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
589 -
590 -
591 -=== **Upgrade the node.js** ===
592 -
593 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
594 -
595 -
596 -the users can refer to this link to upgrade them.
597 -
598 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
599 -
600 -
601 -== 4.3 How to disable the built-in server ==
602 -
603 -
604 -Use the following commands to start and stop the TTNv3 service:
605 -
606 -(% class="box infomessage" %)
607 607  (((
608 -**# start**
609 -systemctl start ttnstack
610 -
611 -**# stop**
612 -systemctl stop ttnstack
613 -
614 -**# enable**
615 -systemctl enable ttnstack
616 -
617 -**#disable**
618 -systemctl disable ttnstack
362 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with the TTN-Stack
363 + You can complete the installation manually with the following command.**
619 619  )))
620 620  
621 -Use the following commands to start and stop the Node-Red service:
622 622  
623 623  (% class="box infomessage" %)
624 624  (((
625 -**# start**
626 -systemctl start nodered
627 -
628 -**# stop**
629 -systemctl stop nodered
630 -
631 -**# enable**
632 -systemctl enable nodered
633 -
634 -**#disable**
635 -systemctl disable nodered
636 -)))
637 -
638 -
639 -== 4.4 How to use ChirpStack on LPS8-V2 ==
640 -
641 -
642 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
643 -
644 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
645 -
646 -[[image:image-20230222094908-1.png||height="133" width="798"]]
647 -
648 -
649 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
650 -
651 -
652 -
653 -= 6. How users can access LPS8-V2 using serial USB =
654 -
655 -
656 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
657 -
658 -
659 -Port 1 of the UART on the LPS8-V2 is GND
660 -
661 -(% class="box infomessage" %)
662 662  (((
663 -**TXD  <~-~--> UART RXD (Gray line)**
664 -
665 -**RXD  <~-~--> UART TXD (White line)**
666 -
667 -**GND <~-~--> GND (Black line)**
370 +(% style="background-color:#fcf8e3" %)cd /tmp && wget [[http:~~/~~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh>>http://repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh]]
371 +chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
668 668  )))
373 +)))
669 669  
670 670  
671 -**LPS8v2 UART connection photo**
672 672  
377 += **5. Build-in Application Server ~-~- Node-Red** =
673 673  
674 -[[image:image-20230421094319-2.png||height="351" width="392"]]
675 675  
676 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
380 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
677 677  
382 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
678 678  
679 -[[image:image-20220804164928-3.png||height="320" width="332"]]
680 680  
385 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
681 681  
682 -[[image:image-20220804164747-2.png||height="622" width="594"]]
683 683  
388 +[[image:image-20220725172124-3.png||height="610" width="843"]]
684 684  
685 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
686 686  
687 -
688 -== **Step 1: Configure Frequency Band** ==
689 -
690 -
691 -//Each country has a requirement for frequency region. Choose the right one for your area.//
692 -
693 -[[image:image-20220905164308-1.png]]
694 -
695 -
696 -
697 -== **Step 2: Configure the forward address** ==
698 -
699 -
700 -**Select one of the servers to configure.**
701 -
702 -**For example:**
703 -
704 -[[image:image-20220905164847-2.png]]
705 -
706 -
707 -
708 -== **Step 3: Download and Install the Helium-gateway-rs** ==
709 -
710 -
711 -**Access the gateway CLI via SSH.**
712 -
713 -[[image:image-20230425153417-2.png]]
714 -
715 -
716 -**Install the new gateway-rs**
717 -
718 -(% class="box infomessage" %)
719 719  (((
720 -**apt update && apt install helium-gateway**
392 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
393 + You can complete the installation manually with the following command.**
721 721  )))
722 722  
723 -[[image:image-20230425154058-4.png]]
724 724  
725 725  
726 -
727 -Option: If you installed the older gateway-rs, you have clean it
728 -
729 729  (% class="box infomessage" %)
730 730  (((
731 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
732 -)))
733 -
734 -[[image:image-20230425153823-3.png]]
735 -
736 -
737 -**Change the region setting:**
738 -
739 -
740 -(% class="box infomessage" %)
741 741  (((
742 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
743 -
744 -
745 -**e.g: **
746 -
747 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
748 -
749 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
401 +(% style="background-color:#fcf8e3" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
402 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
750 750  )))
751 -
752 -
753 -**Restart the gateway-rs**
754 -
755 -(% class="box infomessage" %)
756 -(((
757 -**systemctl restart helium_gateway**
758 758  )))
759 759  
760 -[[image:image-20230425155612-7.png||height="265" width="911"]]
406 +[[image:image-20220728102000-1.png]]
761 761  
762 762  
409 += **6. How users can access LPS8v2 using serial USB** =
763 763  
764 -**Check the helium_gateway running status**
765 765  
412 +**USB TTL to LPS8v2  Connection:**
766 766  
767 -(% class="box infomessage" %)
768 -(((
769 -**systemctl status helium_gateway**
770 -)))
414 +Port 1 of the UART on the LPS8v2 is GND
771 771  
772 -
773 -[[image:image-20230425154740-5.png]]
774 -
775 -
776 -
777 -**Check the helium_gateway Log：**
778 -
779 779  (% class="box infomessage" %)
780 780  (((
781 -**journalctl -u helium_gateway -f**
782 -)))
418 +TXD  <~-~--> UART RXD (Gray line)
783 783  
420 +RXD  <~-~--> UART TXD (White line)
784 784  
785 -[[image:image-20230425155659-8.png]]
786 -
787 -
788 -= 8. OTA System Update =
789 -
790 -
791 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
792 -
793 -
794 -
795 -= 9. FAQ =
796 -
797 -== 9.1 How to change Hostname ==
798 -
799 -
800 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
801 -
802 -(% class="box infomessage" %)
803 -(((
804 -hostnamectl set-hostname dragino-123456
422 +GND <~-~--> GND (Black line)
805 805  )))
806 806  
807 -[[image:image-20230517102429-1.png]]
808 808  
809 -After the configuration is complete, run "reboot" to restart the gateway.
426 +**LPS8v2 UART connection photo**
810 810  
428 +[[image:image-20220804163015-1.png||height="621" width="466"]]
811 811  
812 -= 10. Trouble Shooting =
813 813  
814 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
815 815  
432 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
816 816  
817 -[[image:image-20220920135918-1.png]]
434 +[[image:image-20220804164928-3.png||height="320" width="332"]]
818 818  
436 +[[image:image-20220804164747-2.png||height="622" width="594"]]
819 819  
820 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
438 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
821 821  
822 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
823 823  
824 -
825 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
826 -
827 -**Click the update URL button to configure the URL with the current eth port address.**
828 -
829 -[[image:image-20220920141936-2.png]]
830 -
831 -
832 -== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
833 -
834 -
835 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
836 -
837 -[[image:image-20230508171607-1.png]]
838 -
839 -
840 -== 10.3  Fallback IP does not work, how can users check ==
841 -
842 -
843 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
844 -
845 -
846 -**1.Check whether the configuration is correct**
847 -
848 -Run the CMD command to ipconfig and ping 172.31.255.254.
849 -
850 -If this fails, the user needs to reconfigure.
851 -
852 -[[image:image-20230413170224-3.png||height="433" width="707"]]
853 -
854 -[[image:image-20230413170246-4.png]]
855 -
856 -
857 -**2. Check whether the firewall is disabled**
858 -
859 -If the firewall is not down, this will affect access to the gateway.
860 -
861 -
862 -== 10.4  Click "Manual_Update", why there is no response? ==
863 -
864 -
865 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
866 -
867 -
868 -[[image:image-20230527090555-3.png||height="660" width="832"]]
869 -
870 -
871 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
872 -
873 -
874 874  (((
875 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
442 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
876 876  )))
877 877  
878 878  (((
879 -With your question as detailed as possible. We will reply and help you in the shortest.
446 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
880 880  
881 881  
882 -= 12. Reference =
883 883  
450 += **11 Reference** =
884 884  
452 +
885 885  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
886 886  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
887 887  
... ... @@ -888,7 +888,7 @@
888 888  
889 889  )))
890 890  
891 -= 13. Order Info =
459 += **12. Order Info** =
892 892  
893 893  
894 894  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -912,9 +912,10 @@
912 912  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
913 913  
914 914  
915 -= 14. Manufacturer Info =
916 916  
484 += **13. Manufacturer Info** =
917 917  
486 +
918 918  **Shenzhen Dragino Technology Development co. LTD**
919 919  
920 920  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -922,9 +922,10 @@
922 922  LongCheng Street, LongGang District ; Shenzhen 518116,China
923 923  
924 924  
925 -= 15. FCC Warning =
926 926  
495 += **14. FCC Warning** =
927 927  
497 +
928 928  (((
929 929  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
930 930  )))
... ... @@ -953,7 +953,5 @@
953 953  
954 954  (((
955 955  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
956 -
957 -
958 958  )))
959 959  )))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0